From: Pavel Machek <pma@sysgo.com>
To: kernel list <linux-kernel@vger.kernel.org>,
chunkeey@googlemail.com, linux-wireless@vger.kernel.org
Subject: carl9170 disconnects under load
Date: Tue, 26 Oct 2010 12:48:11 +0200 [thread overview]
Message-ID: <20101026104811.GA11357@pma.sysgo.com> (raw)
Hi!
I'm testing driver from -wireless testing, cca 2.6.26-rc7.
It seems to work (up to 802.11n speeds -- I've seen iwconfig claiming
121 MB/sec), but disconnects rather quickly when under load:
telnet 192.168.1.3 chargen > /dev/null
The machine is powerpc mpc5200b board, with OHCI driver -- it is not
capable of USB2.0 speeds.
Any ideas?
Pavel
wlan0: RX AssocResp from 00:23:f8:5d:76:93 (capab=0xc21 status=0
aid=1)
wlan0: associated
ieee80211 phy2: Allocated STA 00:23:f8:5d:76:93
ieee80211 phy2: Inserted STA 00:23:f8:5d:76:93
ieee80211 phy2: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023
txop=0 uapsd=0
ieee80211 phy2: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023
txop=0 uapsd=0
ieee80211 phy2: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15
txop=94 uapsd=0
ieee80211 phy2: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47
uapsd=0
Open BA session requested for 00:23:f8:5d:76:93 tid 0
activated addBA response timer on tid 0
switched off addBA timer for tid 0
Aggregation is on for tid 0
Rx A-MPDU request on tid 0 result 0
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
net_ratelimit: 79 callbacks suppressed
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
net_ratelimit: 58 callbacks suppressed
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
ieee80211 phy2: release an RX reorder frame due to timeout on earlier
frames
usb 1-1: USB disconnect, address 6
Tx BA session stop requested for 00:23:f8:5d:76:93 tid 0
Rx BA session stop requested for 00:23:f8:5d:76:93 tid 0
wlan0: deauthenticating from 00:23:f8:5d:76:93 by local choice
(reason=3)
Tx BA session stop requested for 00:23:f8:5d:76:93 tid 0
ieee80211 phy2: Removed STA 00:23:f8:5d:76:93
ieee80211 phy2: Destroyed STA 00:23:f8:5d:76:93
ieee80211 phy2: device now idle
next reply other threads:[~2010-10-26 10:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-26 10:48 Pavel Machek [this message]
2010-11-01 9:31 ` carl9170 disconnects under load Pavel Machek
2010-11-01 9:46 ` Pavel Machek
2010-11-01 10:10 ` Pavel Machek
2010-11-01 12:11 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101026104811.GA11357@pma.sysgo.com \
--to=pma@sysgo.com \
--cc=chunkeey@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).