From: "John W. Linville" <linville@tuxdriver.com>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: linux-wireless@vger.kernel.org, "Michael Büsch" <mb@bu3sch.de>,
b43-dev@lists.infradead.org
Subject: Re: [PATCH] ssb: fail registration for unknown SPROM revision
Date: Thu, 18 Nov 2010 11:26:18 -0500 [thread overview]
Message-ID: <20101118162617.GA2468@tuxdriver.com> (raw)
In-Reply-To: <20101116212321.GF10774@tuxdriver.com>
On Tue, Nov 16, 2010 at 04:23:21PM -0500, John W. Linville wrote:
> On Wed, Nov 03, 2010 at 11:28:46PM +0100, Rafał Miłecki wrote:
> > Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> > ---
> > As noticed my Michael we have this left from old times of limited amount of
> > revisions. It's not reliable to treat unknown as rev1.
> >
> > Michael: would you like to add Reported-by?
> >
> > John: it's for 2.6.38.
> > ---
> > drivers/ssb/pci.c | 8 +++-----
> > 1 files changed, 3 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
> > index b5343ac..41a7337 100644
> > --- a/drivers/ssb/pci.c
> > +++ b/drivers/ssb/pci.c
> > @@ -600,11 +600,9 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
> > sprom_extract_r8(out, in);
> > break;
> > default:
> > - ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
> > - " revision %d detected. Will extract"
> > - " v1\n", out->revision);
> > - out->revision = 1;
> > - sprom_extract_r123(out, in);
> > + ssb_printk(KERN_ERR PFX "Unsupported SPROM revision %d"
> > + " detected\n", out->revision);
> > + return -EINVAL;
> > }
> >
> > if (out->boardflags_lo == 0xFFFF)
>
> I think this is going to make my b43 PCI-E card not work...I'll try
> it and get back to you...
Yeah...
[ 125.520348] b43-pci-bridge 0000:04:00.0: enabling device (0000 -> 0002)
[ 125.520359] b43-pci-bridge 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 125.520373] b43-pci-bridge 0000:04:00.0: setting latency timer to 64
[ 125.529241] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 125.529255] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 125.529268] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 125.529280] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 125.545750] ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
[ 125.545752] ssb: Unsupported SPROM revision 255 detected
[ 125.545797] ssb: Failed to register PCI version of SSB with error -22
[ 125.545810] b43-pci-bridge 0000:04:00.0: PCI INT A disabled
[ 125.545827] b43-pci-bridge: probe of 0000:04:00.0 failed with error -22
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2010-11-18 16:30 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-03 22:28 [PATCH] ssb: return -ENOMEM on alloc fail (instead of CRC check's result) Rafał Miłecki
2010-11-03 22:28 ` [PATCH] ssb: fail registration for unknown SPROM revision Rafał Miłecki
2010-11-03 22:36 ` Michael Büsch
2010-11-16 21:23 ` John W. Linville
2010-11-17 17:12 ` Michael Büsch
2010-11-18 16:27 ` John W. Linville
2010-11-18 16:35 ` Michael Büsch
2010-11-18 16:44 ` Rafał Miłecki
2010-11-18 16:47 ` Michael Büsch
2010-11-18 17:02 ` Larry Finger
2010-11-18 17:07 ` Michael Büsch
2010-11-18 17:29 ` Larry Finger
2010-11-18 16:26 ` John W. Linville [this message]
2010-11-18 16:35 ` Rafał Miłecki
2010-11-03 22:31 ` [PATCH] ssb: return -ENOMEM on alloc fail (instead of CRC check's result) Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101118162617.GA2468@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).