From: Nick Kossifidis <mickflemm@gmail.com>
To: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org
Cc: linville@tuxdriver.com, me@bobcopeland.com, mcgrof@gmail.com,
jirislaby@gmail.com, nbd@openwrt.org, br1@einfach.org
Subject: [PATCH 04/30] ath5k: Use new dma_stop function on base.c
Date: Tue, 23 Nov 2010 20:45:38 +0200 [thread overview]
Message-ID: <20101123184538.GD4303@makis.mantri> (raw)
* Since we stop rx/tx dma and pcu durring reset there is no need to
call ath5k_hw_stop_rx/tx_dma before, also there is no need to call
them durring stop_locked since we can use ath5k_hw_dma_stop for
both.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
---
drivers/net/wireless/ath/ath5k/base.c | 99 ++++++++++++++-------------------
1 files changed, 41 insertions(+), 58 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7f783d9..eea5879 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1063,62 +1063,44 @@ err:
return ret;
}
-static void
-ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
-{
- struct ath5k_buf *bf, *bf0;
-
- /*
- * NB: this assumes output has been stopped and
- * we do not need to block ath5k_tx_tasklet
- */
- spin_lock_bh(&txq->lock);
- list_for_each_entry_safe(bf, bf0, &txq->q, list) {
- ath5k_debug_printtxbuf(sc, bf);
-
- ath5k_txbuf_free_skb(sc, bf);
-
- spin_lock_bh(&sc->txbuflock);
- list_move_tail(&bf->list, &sc->txbuf);
- sc->txbuf_len++;
- txq->txq_len--;
- spin_unlock_bh(&sc->txbuflock);
- }
- txq->link = NULL;
- txq->txq_poll_mark = false;
- spin_unlock_bh(&txq->lock);
-}
-
-/*
- * Drain the transmit queues and reclaim resources.
+/**
+ * ath5k_drain_tx_buffs - Empty tx buffers
+ *
+ * @sc The &struct ath5k_softc
+ *
+ * Empty tx buffers from all queues in preparation
+ * of a reset or during shutdown.
+ *
+ * NB: this assumes output has been stopped and
+ * we do not need to block ath5k_tx_tasklet
*/
static void
-ath5k_txq_cleanup(struct ath5k_softc *sc)
+ath5k_drain_tx_buffs(struct ath5k_softc *sc)
{
- struct ath5k_hw *ah = sc->ah;
- unsigned int i;
+ struct ath5k_txq *txq;
+ struct ath5k_buf *bf, *bf0;
+ int i;
- /* XXX return value */
- if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
- /* don't touch the hardware if marked invalid */
- ath5k_hw_stop_tx_dma(ah, sc->bhalq);
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
- ath5k_hw_get_txdp(ah, sc->bhalq));
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
- if (sc->txqs[i].setup) {
- ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
- "link %p\n",
- sc->txqs[i].qnum,
- ath5k_hw_get_txdp(ah,
- sc->txqs[i].qnum),
- sc->txqs[i].link);
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
+ if (sc->txqs[i].setup) {
+ txq = &sc->txqs[i];
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_debug_printtxbuf(sc, bf);
+
+ ath5k_txbuf_free_skb(sc, bf);
+
+ spin_lock_bh(&sc->txbuflock);
+ list_move_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock_bh(&sc->txbuflock);
}
+ txq->link = NULL;
+ txq->txq_poll_mark = false;
+ spin_unlock_bh(&txq->lock);
+ }
}
-
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
- if (sc->txqs[i].setup)
- ath5k_txq_drainq(sc, &sc->txqs[i]);
}
static void
@@ -1178,16 +1160,19 @@ err:
}
/*
- * Disable the receive h/w in preparation for a reset.
+ * Disable the receive logic on PCU (DRU)
+ * In preparation for a shutdown.
+ *
+ * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
+ * does.
*/
static void
ath5k_rx_stop(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
- ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
- ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_debug_printrxbuffs(sc, ah);
}
@@ -2383,10 +2368,9 @@ ath5k_stop_locked(struct ath5k_softc *sc)
ath5k_led_off(sc);
ath5k_hw_set_imr(ah, 0);
synchronize_irq(sc->pdev->irq);
- }
- ath5k_txq_cleanup(sc);
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
ath5k_rx_stop(sc);
+ ath5k_hw_dma_stop(ah);
+ ath5k_drain_tx_buffs(sc);
ath5k_hw_phy_disable(ah);
}
@@ -2532,8 +2516,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
stop_tasklets(sc);
if (chan) {
- ath5k_txq_cleanup(sc);
- ath5k_rx_stop(sc);
+ ath5k_drain_tx_buffs(sc);
sc->curchan = chan;
sc->curband = &sc->sbands[chan->band];
reply other threads:[~2010-11-23 18:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101123184538.GD4303@makis.mantri \
--to=mickflemm@gmail.com \
--cc=ath5k-devel@lists.ath5k.org \
--cc=br1@einfach.org \
--cc=jirislaby@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mcgrof@gmail.com \
--cc=me@bobcopeland.com \
--cc=nbd@openwrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox