From: Bruno Randolf <br1@einfach.org>
To: linville@tuxdriver.com
Cc: ath5k-devel@lists.ath5k.org, linux-wireless@vger.kernel.org,
mickflemm@gmail.com
Subject: [PATCH 5/5] ath5k: Use helper function to get eeprom mode from channel
Date: Tue, 21 Dec 2010 17:30:43 +0900 [thread overview]
Message-ID: <20101221083042.8765.42404.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20101221083020.8765.16350.stgit@localhost6.localdomain6>
Introduce a helper function to get the EEPROM mode from channel and remove
multiple similar switch statements. Also since it's now easy to get the EEPROM
mode from the channel, use them inside the functions which need it, instead of
passing a redundant ee_mode parameter.
Signed-off-by: Bruno Randolf <br1@einfach.org>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 2 -
drivers/net/wireless/ath/ath5k/eeprom.c | 16 +++++++
drivers/net/wireless/ath/ath5k/eeprom.h | 2 +
drivers/net/wireless/ath/ath5k/phy.c | 68 +++++++------------------------
drivers/net/wireless/ath/ath5k/reset.c | 19 ++++-----
5 files changed, 42 insertions(+), 65 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 5de8520..407e39c 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1318,7 +1318,7 @@ void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
/* Init function */
int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 mode, u8 ee_mode, bool fast);
+ u8 mode, bool fast);
/*
* Functions used internaly
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 97eaa9a..80e6256 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1802,3 +1802,19 @@ ath5k_eeprom_detach(struct ath5k_hw *ah)
for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
ath5k_eeprom_free_pcal_info(ah, mode);
}
+
+int
+ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+{
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ case CHANNEL_XR:
+ return AR5K_EEPROM_MODE_11A;
+ case CHANNEL_G:
+ return AR5K_EEPROM_MODE_11G;
+ case CHANNEL_B:
+ return AR5K_EEPROM_MODE_11B;
+ default:
+ return -1;
+ }
+}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 0017006..7c09e15 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -517,3 +517,5 @@ struct ath5k_eeprom_info {
u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
};
+int
+ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b6e9621..9306d5f 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1355,20 +1355,7 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
return;
}
- switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) {
- case CHANNEL_A:
- case CHANNEL_XR:
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_G:
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- default:
- case CHANNEL_B:
- ee_mode = AR5K_EEPROM_MODE_11B;
- break;
- }
-
+ ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
/* completed NF calibration, test threshold */
nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -1941,18 +1928,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
def_ant = ah->ah_def_ant;
- switch (channel->hw_value & CHANNEL_MODES) {
- case CHANNEL_A:
- case CHANNEL_XR:
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_G:
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_B:
- ee_mode = AR5K_EEPROM_MODE_11B;
- break;
- default:
+ ee_mode = ath5k_eeprom_mode_from_channel(channel);
+ if (ee_mode < 0) {
ATH5K_ERR(ah->ah_sc,
"invalid channel: %d\n", channel->center_freq);
return;
@@ -3100,11 +3077,11 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
*/
static int
ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 ee_mode, u8 txpower)
+ u8 txpower)
{
struct ath5k_rate_pcal_info rate_info;
struct ieee80211_channel *curr_channel = ah->ah_current_channel;
- u8 type;
+ u8 type, ee_mode;
int ret;
if (txpower > AR5K_TUNE_MAX_TXPOWER) {
@@ -3112,6 +3089,13 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return -EINVAL;
}
+ ee_mode = ath5k_eeprom_mode_from_channel(channel);
+ if (ee_mode < 0) {
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
/* Initialize TX power table */
switch (ah->ah_radio) {
case AR5K_RF5110:
@@ -3208,31 +3192,10 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
- /*Just a try M.F.*/
- struct ieee80211_channel *channel = ah->ah_current_channel;
- u8 ee_mode;
-
- switch (channel->hw_value & CHANNEL_MODES) {
- case CHANNEL_A:
- case CHANNEL_XR:
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_G:
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_B:
- ee_mode = AR5K_EEPROM_MODE_11B;
- break;
- default:
- ATH5K_ERR(ah->ah_sc,
- "invalid channel: %d\n", channel->center_freq);
- return -EINVAL;
- }
-
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
- return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
+ return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower);
}
/*************\
@@ -3240,7 +3203,7 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
\*************/
int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 mode, u8 ee_mode, bool fast)
+ u8 mode, bool fast)
{
struct ieee80211_channel *curr_channel;
int ret, i;
@@ -3281,8 +3244,7 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
* RF buffer settings on 5211/5212+ so that we
* properly set curve indices.
*/
- ret = ath5k_hw_txpower(ah, channel, ee_mode,
- ah->ah_txpower.txp_cur_pwr ?
+ ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ?
ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER);
if (ret)
return ret;
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 4b8b987..3c962f7 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -866,15 +866,18 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
}
static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, u8 ee_mode)
+ struct ieee80211_channel *channel)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
s16 cck_ofdm_pwr_delta;
+ u8 ee_mode;
/* TODO: Add support for AR5210 EEPROM */
if (ah->ah_version == AR5K_AR5210)
return;
+ ee_mode = ath5k_eeprom_mode_from_channel(channel);
+
/* Adjust power delta for channel 14 */
if (channel->center_freq == 2484)
cck_ofdm_pwr_delta =
@@ -1020,10 +1023,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ieee80211_channel *channel, bool fast, bool skip_pcu)
{
u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
- u8 mode, ee_mode;
+ u8 mode;
int i, ret;
- ee_mode = 0;
tsf_up = 0;
tsf_lo = 0;
mode = 0;
@@ -1070,7 +1072,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
mode = AR5K_MODE_11A;
- ee_mode = AR5K_EEPROM_MODE_11A;
break;
case CHANNEL_G:
@@ -1081,7 +1082,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
}
mode = AR5K_MODE_11G;
- ee_mode = AR5K_EEPROM_MODE_11G;
break;
case CHANNEL_B:
@@ -1092,7 +1092,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
}
mode = AR5K_MODE_11B;
- ee_mode = AR5K_EEPROM_MODE_11B;
break;
case CHANNEL_XR:
if (ah->ah_version == AR5K_AR5211) {
@@ -1101,7 +1100,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
return -EINVAL;
}
mode = AR5K_MODE_XR;
- ee_mode = AR5K_EEPROM_MODE_11A;
break;
default:
ATH5K_ERR(ah->ah_sc,
@@ -1114,8 +1112,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
* go on. If it fails continue with a normal reset.
*/
if (fast) {
- ret = ath5k_hw_phy_init(ah, channel, mode,
- ee_mode, true);
+ ret = ath5k_hw_phy_init(ah, channel, mode, true);
if (ret) {
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
"fast chan change failed, falling back to normal reset\n");
@@ -1212,7 +1209,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
ath5k_hw_tweak_initval_settings(ah, channel);
/* Commit values from EEPROM */
- ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode);
+ ath5k_hw_commit_eeprom_settings(ah, channel);
/*
@@ -1251,7 +1248,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/*
* Initialize PHY
*/
- ret = ath5k_hw_phy_init(ah, channel, mode, ee_mode, false);
+ ret = ath5k_hw_phy_init(ah, channel, mode, false);
if (ret) {
ATH5K_ERR(ah->ah_sc,
"failed to initialize PHY (%i) !\n", ret);
next prev parent reply other threads:[~2010-12-21 8:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-21 8:30 [PATCH 1/5] ath5k: Simplify powertable recalculation Bruno Randolf
2010-12-21 8:30 ` [PATCH 2/5] ath5k: Separate powertable setup and writing Bruno Randolf
2010-12-21 14:48 ` Nick Kossifidis
2010-12-21 8:30 ` [PATCH 3/5] ath5k: Track current TX power separately from max TX power Bruno Randolf
2010-12-21 14:48 ` Nick Kossifidis
2010-12-21 8:30 ` [PATCH 4/5] ath5k: Remove ATH5K_INI_RFGAIN defines, use band instead Bruno Randolf
2010-12-21 14:49 ` Nick Kossifidis
2010-12-21 8:30 ` Bruno Randolf [this message]
2010-12-21 14:49 ` [PATCH 5/5] ath5k: Use helper function to get eeprom mode from channel Nick Kossifidis
2010-12-21 14:47 ` [PATCH 1/5] ath5k: Simplify powertable recalculation Nick Kossifidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101221083042.8765.42404.stgit@localhost6.localdomain6 \
--to=br1@einfach.org \
--cc=ath5k-devel@lists.ath5k.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=mickflemm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox