From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless-2.6 2010-12-22
Date: Wed, 22 Dec 2010 14:52:09 -0500 [thread overview]
Message-ID: <20101222195209.GD10046@tuxdriver.com> (raw)
Dave,
Three more fixes intended for 2.6.37...
The one from Johannes Berg avoids a NULL pointer dereference in the mesh
code. The one from Johannes Stezenbach fixes bug 24892, which is a
lock-up caused by rt2x00. Finally, you probably recognize the one from
Meelis Roos which removes some log spam coming from hostap. These have
all spent several days in linux-next without any adverse effects.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit 227fb925d3d3c5e565c1f1323a530564509195f2:
MAINTAINERS: email address change (2010-12-21 19:58:15 -0800)
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master
Johannes Berg (1):
mac80211: fix mesh forwarding
Johannes Stezenbach (1):
mac80211/rt2x00: add ieee80211_tx_status_ni()
Meelis Roos (1):
hostap: remove netif_stop_queue from init
drivers/net/wireless/hostap/hostap_main.c | 1 -
drivers/net/wireless/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
drivers/net/wireless/rt2x00/rt2x00dev.c | 9 ++++++---
include/net/mac80211.h | 28 ++++++++++++++++++++++++----
net/mac80211/rx.c | 5 ++++-
6 files changed, 36 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 25a2722..1d9aed6 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -891,7 +891,6 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local,
SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops);
- netif_stop_queue(dev);
}
static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked)
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b267395..09a6790 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -912,6 +912,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 94fe589..ab43e7c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -664,6 +664,7 @@ enum rt2x00_flags {
DRIVER_REQUIRE_COPY_IV,
DRIVER_REQUIRE_L2PAD,
DRIVER_REQUIRE_TXSTATUS_FIFO,
+ DRIVER_REQUIRE_TASKLET_CONTEXT,
/*
* Driver features
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5ba79b9..d019830 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -390,9 +390,12 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* through a mac80211 library call (RTS/CTS) then we should not
* send the status report back.
*/
- if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- ieee80211_tx_status(rt2x00dev->hw, entry->skb);
- else
+ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+ if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags))
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+ else
+ ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+ } else
dev_kfree_skb_any(entry->skb);
/*
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9fdf982..365359b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -2024,8 +2024,8 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
*
* This function may not be called in IRQ context. Calls to this function
* for a single hardware must be synchronized against each other. Calls
- * to this function and ieee80211_tx_status_irqsafe() may not be mixed
- * for a single hardware.
+ * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
@@ -2034,13 +2034,33 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
struct sk_buff *skb);
/**
+ * ieee80211_tx_status_ni - transmit status callback (in process context)
+ *
+ * Like ieee80211_tx_status() but can be called in process context.
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_irqsafe() may not be mixed
+ * for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+ struct sk_buff *skb)
+{
+ local_bh_disable();
+ ieee80211_tx_status(hw, skb);
+ local_bh_enable();
+}
+
+/**
* ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
*
* Like ieee80211_tx_status() but can be called in IRQ context
* (internally defers to a tasklet.)
*
- * Calls to this function and ieee80211_tx_status() may not be mixed for a
- * single hardware.
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_ni() may not be mixed for a single hardware.
*
* @hw: the hardware the frame was transmitted by
* @skb: the frame that was transmitted, owned by mac80211 after this call
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 54fb4a0e..b01e467 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1788,9 +1788,11 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
fwd_skb = skb_copy(skb, GFP_ATOMIC);
- if (!fwd_skb && net_ratelimit())
+ if (!fwd_skb && net_ratelimit()) {
printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
sdata->name);
+ goto out;
+ }
fwd_hdr = (struct ieee80211_hdr *) fwd_skb->data;
memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
@@ -1828,6 +1830,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
}
}
+ out:
if (is_multicast_ether_addr(hdr->addr1) ||
sdata->dev->flags & IFF_PROMISC)
return RX_CONTINUE;
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2010-12-22 20:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-22 19:52 John W. Linville [this message]
2010-12-23 1:35 ` pull request: wireless-2.6 2010-12-22 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101222195209.GD10046@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).