From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
zd1211-devs@lists.sourceforge.net,
Ulrich Kunitz <kune@deine-taler.de>
Subject: [RFC PATCH 5/6] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()
Date: Sun, 26 Dec 2010 13:24:52 +0200 [thread overview]
Message-ID: <20101226112452.31775.12810.stgit@fate.lan> (raw)
In-Reply-To: <20101226112404.31775.77854.stgit@fate.lan>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_mac.c | 38 +++++++++++++++++++++++++++++---
1 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 9f755fc..2489c97 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -951,15 +951,46 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
}
+static void zd_beacon_done(struct zd_mac *mac)
+{
+ struct sk_buff *skb, *beacon;
+
+ if (mac->vif || mac->vif->type == NL80211_IFTYPE_UNSPECIFIED)
+ return;
+
+ /*
+ * Send out buffered broad- and multicast frames.
+ */
+ if (mac->vif->type == NL80211_IFTYPE_AP) {
+ dev_dbg_f_limit(zd_mac_dev(mac), "buffered_bc tx\n");
+ skb = ieee80211_get_buffered_bc(mac->hw, mac->vif);
+ while (skb) {
+ zd_op_tx(mac->hw, skb);
+ skb = ieee80211_get_buffered_bc(mac->hw, mac->vif);
+ }
+ }
+
+ /*
+ * Fetch next beacon so that tim_count is updated.
+ */
+ beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+ if (!beacon)
+ return;
+
+ zd_mac_config_beacon(mac->hw, beacon);
+ kfree_skb(beacon);
+}
+
static void zd_process_intr(struct work_struct *work)
{
u16 int_status;
struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
- if (int_status & INT_CFG_NEXT_BCN)
+ if (int_status & INT_CFG_NEXT_BCN) {
dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
- else
+ zd_beacon_done(mac);
+ } else
dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n");
zd_chip_enable_hwint(&mac->chip);
@@ -1186,7 +1217,8 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SIGNAL_UNSPEC;
+ IEEE80211_HW_SIGNAL_UNSPEC |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_MESH_POINT) |
next prev parent reply other threads:[~2010-12-26 11:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-26 11:24 [RFC PATCH 0/6] zd1211rw: add support for AP mode Jussi Kivilinna
2010-12-26 11:24 ` [RFC PATCH 1/6] zd1211rw: fix beacon interval setup Jussi Kivilinna
2010-12-26 11:56 ` Rafał Miłecki
2010-12-26 11:24 ` [RFC PATCH 2/6] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2010-12-26 11:24 ` [RFC PATCH 3/6] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2010-12-26 12:14 ` Rafał Miłecki
2010-12-26 14:50 ` Jussi Kivilinna
2010-12-26 11:24 ` [RFC PATCH 4/6] zd1211rw: implement seq_num for IEEE80211_TX_CTL_ASSIGN_SEQ Jussi Kivilinna
2010-12-26 11:24 ` Jussi Kivilinna [this message]
2010-12-26 12:22 ` [RFC PATCH 5/6] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Rafał Miłecki
2010-12-26 14:51 ` Jussi Kivilinna
2010-12-26 11:25 ` [RFC PATCH 6/6] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2010-12-26 12:24 ` [RFC PATCH 0/6] zd1211rw: add support for AP mode Johannes Berg
2010-12-26 12:37 ` Rafał Miłecki
2010-12-26 14:53 ` Jussi Kivilinna
2010-12-27 14:28 ` Jussi Kivilinna
2010-12-27 20:03 ` Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101226112452.31775.12810.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
--cc=zd1211-devs@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).