From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>, Ulrich Kunitz <kune@deine-taler.de>
Subject: [RFC PATCH 04/17] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter
Date: Wed, 05 Jan 2011 01:48:19 +0200 [thread overview]
Message-ID: <20110104234819.25309.44441.stgit@fate.lan> (raw)
In-Reply-To: <20110104234745.25309.72030.stgit@fate.lan>
Workers not needed anymore since configure_filter may sleep. Keep
mac->multicast_hash for later use (hw reset).
Signed-off-by: Jussi Kivilinna <jussi.kivilina@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_mac.c | 38 ++++++--------------------------
drivers/net/wireless/zd1211rw/zd_mac.h | 2 --
2 files changed, 7 insertions(+), 33 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 43307bd..ca3b4e1 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -923,31 +923,6 @@ static void zd_process_intr(struct work_struct *work)
}
-static void set_multicast_hash_handler(struct work_struct *work)
-{
- struct zd_mac *mac =
- container_of(work, struct zd_mac, set_multicast_hash_work);
- struct zd_mc_hash hash;
-
- spin_lock_irq(&mac->lock);
- hash = mac->multicast_hash;
- spin_unlock_irq(&mac->lock);
-
- zd_chip_set_multicast_hash(&mac->chip, &hash);
-}
-
-static void set_rx_filter_handler(struct work_struct *work)
-{
- struct zd_mac *mac =
- container_of(work, struct zd_mac, set_rx_filter_work);
- int r;
-
- dev_dbg_f(zd_mac_dev(mac), "\n");
- r = set_rx_filter(mac);
- if (r)
- dev_err(zd_mac_dev(mac), "set_rx_filter_handler error %d\n", r);
-}
-
static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw,
struct netdev_hw_addr_list *mc_list)
{
@@ -979,6 +954,7 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw,
};
struct zd_mac *mac = zd_hw_mac(hw);
unsigned long flags;
+ int r;
/* Only deal with supported flags */
changed_flags &= SUPPORTED_FIF_FLAGS;
@@ -1000,11 +976,13 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw,
mac->multicast_hash = hash;
spin_unlock_irqrestore(&mac->lock, flags);
- /* XXX: these can be called here now, can sleep now! */
- queue_work(zd_workqueue, &mac->set_multicast_hash_work);
+ zd_chip_set_multicast_hash(&mac->chip, &hash);
- if (changed_flags & FIF_CONTROL)
- queue_work(zd_workqueue, &mac->set_rx_filter_work);
+ if (changed_flags & FIF_CONTROL) {
+ r = set_rx_filter(mac);
+ if (r)
+ dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n", r);
+ }
/* no handling required for FIF_OTHER_BSS as we don't currently
* do BSSID filtering */
@@ -1160,9 +1138,7 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
zd_chip_init(&mac->chip, hw, intf);
housekeeping_init(mac);
- INIT_WORK(&mac->set_multicast_hash_work, set_multicast_hash_handler);
INIT_WORK(&mac->set_rts_cts_work, set_rts_cts_work);
- INIT_WORK(&mac->set_rx_filter_work, set_rx_filter_handler);
INIT_WORK(&mac->process_intr, zd_process_intr);
SET_IEEE80211_DEV(hw, &intf->dev);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index a6d86b9..f28ecb9 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -173,9 +173,7 @@ struct zd_mac {
spinlock_t intr_lock;
struct ieee80211_hw *hw;
struct housekeeping housekeeping;
- struct work_struct set_multicast_hash_work;
struct work_struct set_rts_cts_work;
- struct work_struct set_rx_filter_work;
struct work_struct process_intr;
struct zd_mc_hash multicast_hash;
u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
next prev parent reply other threads:[~2011-01-04 23:48 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-04 23:47 [RFC PATCH 0/17] zd1211rw: add support for AP mode Jussi Kivilinna
2011-01-04 23:47 ` [RFC PATCH 01/17] zd1211rw: fix tx-queue disabling Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 02/17] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 03/17] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-04 23:48 ` Jussi Kivilinna [this message]
2011-01-04 23:48 ` [RFC PATCH 05/17] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 06/17] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 07/17] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 08/17] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 09/17] zd1211rw: implement seq_num for IEEE80211_TX_CTL_ASSIGN_SEQ Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 10/17] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-06 21:46 ` Christian Lamparter
2011-01-06 21:55 ` Johannes Berg
2011-01-09 15:46 ` Jussi Kivilinna
2011-01-09 20:33 ` Christian Lamparter
2011-01-19 18:49 ` Jussi Kivilinna
2011-01-19 20:22 ` Christian Lamparter
2011-01-20 8:16 ` Jussi Kivilinna
2011-01-20 9:13 ` Helmut Schaa
2011-01-20 17:43 ` Christian Lamparter
2011-01-04 23:49 ` [RFC PATCH 11/17] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 12/17] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 13/17] zd1211rw: use stack for small cmd-buffers Jussi Kivilinna
2011-01-05 9:27 ` Johannes Berg
2011-01-06 18:55 ` Dan Williams
2011-01-06 21:53 ` Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 14/17] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 15/17] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 16/17] zd1211rw: add tx watchdog Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 17/17] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110104234819.25309.44441.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).