From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>, Ulrich Kunitz <kune@deine-taler.de>
Subject: [RFC PATCH 09/17] zd1211rw: implement seq_num for IEEE80211_TX_CTL_ASSIGN_SEQ
Date: Wed, 05 Jan 2011 01:49:02 +0200 [thread overview]
Message-ID: <20110104234902.25309.49677.stgit@fate.lan> (raw)
In-Reply-To: <20110104234745.25309.72030.stgit@fate.lan>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_mac.c | 21 +++++++++++++++++++++
drivers/net/wireless/zd1211rw/zd_mac.h | 2 ++
2 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6be406e..aace010 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -654,6 +654,24 @@ static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon)
(full_len << 19));
}
+static void create_tx_desc_seq(struct zd_mac *mac, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *info)
+{
+ unsigned long irqflags;
+
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
+ return;
+
+ spin_lock_irqsave(&mac->seqlock, irqflags);
+
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ mac->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(mac->seqno);
+
+ spin_unlock_irqrestore(&mac->seqlock, irqflags);
+}
+
static int fill_ctrlset(struct zd_mac *mac,
struct sk_buff *skb)
{
@@ -678,6 +696,8 @@ static int fill_ctrlset(struct zd_mac *mac,
cs_set_control(mac, cs, hdr, info);
+ create_tx_desc_seq(mac, hdr, info);
+
packet_length = frag_len + sizeof(struct zd_ctrlset) + 10;
ZD_ASSERT(packet_length <= 0xffff);
/* ZD1211B: Computing the length difference this way, gives us
@@ -1117,6 +1137,7 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
memset(mac, 0, sizeof(*mac));
spin_lock_init(&mac->lock);
+ spin_lock_init(&mac->seqlock);
mac->hw = hw;
mac->type = NL80211_IFTYPE_UNSPECIFIED;
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 0ec6bde..e663451 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -186,6 +186,8 @@ struct zd_mac {
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_supported_band band;
+ spinlock_t seqlock;
+ u16 seqno;
/* Short preamble (used for RTS/CTS) */
unsigned int short_preamble:1;
next prev parent reply other threads:[~2011-01-04 23:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-04 23:47 [RFC PATCH 0/17] zd1211rw: add support for AP mode Jussi Kivilinna
2011-01-04 23:47 ` [RFC PATCH 01/17] zd1211rw: fix tx-queue disabling Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 02/17] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 03/17] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 04/17] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 05/17] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 06/17] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 07/17] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 08/17] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-04 23:49 ` Jussi Kivilinna [this message]
2011-01-04 23:49 ` [RFC PATCH 10/17] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-06 21:46 ` Christian Lamparter
2011-01-06 21:55 ` Johannes Berg
2011-01-09 15:46 ` Jussi Kivilinna
2011-01-09 20:33 ` Christian Lamparter
2011-01-19 18:49 ` Jussi Kivilinna
2011-01-19 20:22 ` Christian Lamparter
2011-01-20 8:16 ` Jussi Kivilinna
2011-01-20 9:13 ` Helmut Schaa
2011-01-20 17:43 ` Christian Lamparter
2011-01-04 23:49 ` [RFC PATCH 11/17] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 12/17] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 13/17] zd1211rw: use stack for small cmd-buffers Jussi Kivilinna
2011-01-05 9:27 ` Johannes Berg
2011-01-06 18:55 ` Dan Williams
2011-01-06 21:53 ` Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 14/17] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 15/17] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 16/17] zd1211rw: add tx watchdog Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 17/17] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110104234902.25309.49677.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).