linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>, Ulrich Kunitz <kune@deine-taler.de>
Subject: [RFC PATCH 10/17] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()
Date: Wed, 05 Jan 2011 01:49:10 +0200	[thread overview]
Message-ID: <20110104234910.25309.19235.stgit@fate.lan> (raw)
In-Reply-To: <20110104234745.25309.72030.stgit@fate.lan>

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
 drivers/net/wireless/zd1211rw/zd_mac.c |   39 +++++++++++++++++++++++++++++---
 1 files changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index aace010..a3c7e8f 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -958,16 +958,46 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
 	return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
 }
 
+static void zd_beacon_done(struct zd_mac *mac)
+{
+	struct sk_buff *skb, *beacon;
+
+	if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP)
+		return;
+
+	/*
+	 * Send out buffered broad- and multicast frames.
+	 */
+	while (!ieee80211_queue_stopped(mac->hw, 0)) {
+		skb = ieee80211_get_buffered_bc(mac->hw, mac->vif);
+		if (!skb)
+			break;
+		zd_op_tx(mac->hw, skb);
+	}
+
+	/*
+	 * Fetch next beacon so that tim_count is updated.
+	 */
+	beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+	if (!beacon)
+		return;
+
+	zd_mac_config_beacon(mac->hw, beacon);
+	kfree_skb(beacon);
+}
+
 static void zd_process_intr(struct work_struct *work)
 {
 	u16 int_status;
 	struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
 
 	int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
-	if (int_status & INT_CFG_NEXT_BCN)
-		dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
-	else
+	if (int_status & INT_CFG_NEXT_BCN) {
+		/*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/
+		zd_beacon_done(mac);
+	} else {
 		dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n");
+	}
 
 	zd_chip_enable_hwint(&mac->chip);
 }
@@ -1152,7 +1182,8 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band;
 
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_SIGNAL_UNSPEC;
+		    IEEE80211_HW_SIGNAL_UNSPEC |
+		    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
 
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_MESH_POINT) |


  parent reply	other threads:[~2011-01-04 23:49 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-04 23:47 [RFC PATCH 0/17] zd1211rw: add support for AP mode Jussi Kivilinna
2011-01-04 23:47 ` [RFC PATCH 01/17] zd1211rw: fix tx-queue disabling Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 02/17] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 03/17] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 04/17] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 05/17] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 06/17] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 07/17] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-04 23:48 ` [RFC PATCH 08/17] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 09/17] zd1211rw: implement seq_num for IEEE80211_TX_CTL_ASSIGN_SEQ Jussi Kivilinna
2011-01-04 23:49 ` Jussi Kivilinna [this message]
2011-01-06 21:46   ` [RFC PATCH 10/17] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Christian Lamparter
2011-01-06 21:55     ` Johannes Berg
2011-01-09 15:46     ` Jussi Kivilinna
2011-01-09 20:33       ` Christian Lamparter
2011-01-19 18:49         ` Jussi Kivilinna
2011-01-19 20:22           ` Christian Lamparter
2011-01-20  8:16             ` Jussi Kivilinna
2011-01-20  9:13               ` Helmut Schaa
2011-01-20 17:43               ` Christian Lamparter
2011-01-04 23:49 ` [RFC PATCH 11/17] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 12/17] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 13/17] zd1211rw: use stack for small cmd-buffers Jussi Kivilinna
2011-01-05  9:27   ` Johannes Berg
2011-01-06 18:55     ` Dan Williams
2011-01-06 21:53       ` Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 14/17] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-04 23:49 ` [RFC PATCH 15/17] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 16/17] zd1211rw: add tx watchdog Jussi Kivilinna
2011-01-04 23:50 ` [RFC PATCH 17/17] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110104234910.25309.19235.stgit@fate.lan \
    --to=jussi.kivilinna@mbnet.fi \
    --cc=dsd@gentoo.org \
    --cc=kune@deine-taler.de \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).