From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com
Subject: [PATCH 07/21] rt2x00: Convert rt2800pci to use tasklets
Date: Sun, 30 Jan 2011 13:18:38 +0100 [thread overview]
Message-ID: <201101301318.39263.IvDoorn@gmail.com> (raw)
In-Reply-To: <201101301318.14610.IvDoorn@gmail.com>
From: Helmut Schaa <helmut.schaa@googlemail.com>
Fix interrupt processing on slow machines by using individual tasklets
for each different device interrupt. This ensures that while a RX or TX
status tasklet is scheduled only the according device interrupt is
masked and other interrupts such as TBTT can still be processed.
Also, this allows us to use tasklet_hi_schedule for TBTT and PRETBTT
processing which is required to not send out beacons with a wrong DTIM
count (due to delayed periodic beacon updates). Furthermore, this
improves the latency between the TBTT and sending out buffered multi-
and broadcast traffic.
As a nice bonus, the interrupt handling overhead is reduced such that
rt2800pci gains around 25% more throuhput on a rt3052 MIPS board.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 173 ++++++++++++++++++++-----------
1 files changed, 114 insertions(+), 59 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index e4d97ad..31483c7 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -200,6 +200,13 @@ static void rt2800pci_start_queue(struct data_queue *queue)
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
break;
case QID_BEACON:
+ /*
+ * Allow beacon tasklets to be scheduled for periodic
+ * beacon updates.
+ */
+ tasklet_enable(&rt2x00dev->tbtt_tasklet);
+ tasklet_enable(&rt2x00dev->pretbtt_tasklet);
+
rt2800_register_read(rt2x00dev, BCN_TIME_CFG, ®);
rt2x00_set_field32(®, BCN_TIME_CFG_TSF_TICKING, 1);
rt2x00_set_field32(®, BCN_TIME_CFG_TBTT_ENABLE, 1);
@@ -258,6 +265,12 @@ static void rt2800pci_stop_queue(struct data_queue *queue)
rt2800_register_read(rt2x00dev, INT_TIMER_EN, ®);
rt2x00_set_field32(®, INT_TIMER_EN_PRE_TBTT_TIMER, 0);
rt2800_register_write(rt2x00dev, INT_TIMER_EN, reg);
+
+ /*
+ * Wait for tbtt tasklets to finish.
+ */
+ tasklet_disable(&rt2x00dev->tbtt_tasklet);
+ tasklet_disable(&rt2x00dev->pretbtt_tasklet);
break;
default:
break;
@@ -408,6 +421,7 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
int mask = (state == STATE_RADIO_IRQ_ON) ||
(state == STATE_RADIO_IRQ_ON_ISR);
u32 reg;
+ unsigned long flags;
/*
* When interrupts are being enabled, the interrupt registers
@@ -417,10 +431,16 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+ /*
+ * Enable tasklets. The beacon related tasklets are
+ * enabled when the beacon queue is started.
+ */
tasklet_enable(&rt2x00dev->txstatus_tasklet);
- } else if (state == STATE_RADIO_IRQ_OFF)
- tasklet_disable(&rt2x00dev->txstatus_tasklet);
+ tasklet_enable(&rt2x00dev->rxdone_tasklet);
+ tasklet_enable(&rt2x00dev->autowake_tasklet);
+ }
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
rt2x00_set_field32(®, INT_MASK_CSR_RXDELAYINT, 0);
rt2x00_set_field32(®, INT_MASK_CSR_TXDELAYINT, 0);
@@ -441,6 +461,17 @@ static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(®, INT_MASK_CSR_RX_COHERENT, 0);
rt2x00_set_field32(®, INT_MASK_CSR_TX_COHERENT, 0);
rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+
+ if (state == STATE_RADIO_IRQ_OFF) {
+ /*
+ * Ensure that all tasklets are finished before
+ * disabling the interrupts.
+ */
+ tasklet_disable(&rt2x00dev->txstatus_tasklet);
+ tasklet_disable(&rt2x00dev->rxdone_tasklet);
+ tasklet_disable(&rt2x00dev->autowake_tasklet);
+ }
}
static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
@@ -721,45 +752,60 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
}
}
-static void rt2800pci_txstatus_tasklet(unsigned long data)
-{
- rt2800pci_txdone((struct rt2x00_dev *)data);
-}
-
-static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
+static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_field32 irq_field)
{
- struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg = rt2x00dev->irqvalue[0];
+ unsigned long flags;
+ u32 reg;
/*
- * 1 - Pre TBTT interrupt.
+ * Enable a single interrupt. The interrupt mask register
+ * access needs locking.
*/
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
- rt2x00lib_pretbtt(rt2x00dev);
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+ rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ rt2x00_set_field32(®, irq_field, 1);
+ rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+}
- /*
- * 2 - Beacondone interrupt.
- */
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
- rt2x00lib_beacondone(rt2x00dev);
+static void rt2800pci_txstatus_tasklet(unsigned long data)
+{
+ rt2800pci_txdone((struct rt2x00_dev *)data);
/*
- * 3 - Rx ring done interrupt.
+ * No need to enable the tx status interrupt here as we always
+ * leave it enabled to minimize the possibility of a tx status
+ * register overflow. See comment in interrupt handler.
*/
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
- rt2x00pci_rxdone(rt2x00dev);
+}
- /*
- * 4 - Auto wakeup interrupt.
- */
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
- rt2800pci_wakeup(rt2x00dev);
+static void rt2800pci_pretbtt_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00lib_pretbtt(rt2x00dev);
+ rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
+}
- /* Enable interrupts again. */
- rt2x00dev->ops->lib->set_device_state(rt2x00dev,
- STATE_RADIO_IRQ_ON_ISR);
+static void rt2800pci_tbtt_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00lib_beacondone(rt2x00dev);
+ rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
+}
- return IRQ_HANDLED;
+static void rt2800pci_rxdone_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2x00pci_rxdone(rt2x00dev);
+ rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
+}
+
+static void rt2800pci_autowake_tasklet(unsigned long data)
+{
+ struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
+ rt2800pci_wakeup(rt2x00dev);
+ rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP);
}
static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
@@ -805,8 +851,8 @@ static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
- u32 reg;
- irqreturn_t ret = IRQ_HANDLED;
+ u32 reg, mask;
+ unsigned long flags;
/* Read status and ACK all interrupts */
rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, ®);
@@ -818,38 +864,44 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
- rt2800pci_txstatus_interrupt(rt2x00dev);
+ /*
+ * Since INT_MASK_CSR and INT_SOURCE_CSR use the same bits
+ * for interrupts and interrupt masks we can just use the value of
+ * INT_SOURCE_CSR to create the interrupt mask.
+ */
+ mask = ~reg;
- if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT) ||
- rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT) ||
- rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE) ||
- rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP)) {
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) {
+ rt2800pci_txstatus_interrupt(rt2x00dev);
/*
- * All other interrupts are handled in the interrupt thread.
- * Store irqvalue for use in the interrupt thread.
+ * Never disable the TX_FIFO_STATUS interrupt.
*/
- rt2x00dev->irqvalue[0] = reg;
+ rt2x00_set_field32(&mask, INT_MASK_CSR_TX_FIFO_STATUS, 1);
+ }
- /*
- * Disable interrupts, will be enabled again in the
- * interrupt thread.
- */
- rt2x00dev->ops->lib->set_device_state(rt2x00dev,
- STATE_RADIO_IRQ_OFF_ISR);
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_PRE_TBTT))
+ tasklet_hi_schedule(&rt2x00dev->pretbtt_tasklet);
- /*
- * Leave the TX_FIFO_STATUS interrupt enabled to not lose any
- * tx status reports.
- */
- rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
- rt2x00_set_field32(®, INT_MASK_CSR_TX_FIFO_STATUS, 1);
- rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TBTT))
+ tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
- ret = IRQ_WAKE_THREAD;
- }
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
+ tasklet_schedule(&rt2x00dev->rxdone_tasklet);
- return ret;
+ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_AUTO_WAKEUP))
+ tasklet_schedule(&rt2x00dev->autowake_tasklet);
+
+ /*
+ * Disable all interrupts for which a tasklet was scheduled right now,
+ * the tasklet will reenable the appropriate interrupts.
+ */
+ spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
+ rt2800_register_read(rt2x00dev, INT_MASK_CSR, ®);
+ reg &= mask;
+ rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+ spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
+
+ return IRQ_HANDLED;
}
/*
@@ -964,8 +1016,11 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.irq_handler = rt2800pci_interrupt,
- .irq_handler_thread = rt2800pci_interrupt_thread,
- .txstatus_tasklet = rt2800pci_txstatus_tasklet,
+ .txstatus_tasklet = rt2800pci_txstatus_tasklet,
+ .pretbtt_tasklet = rt2800pci_pretbtt_tasklet,
+ .tbtt_tasklet = rt2800pci_tbtt_tasklet,
+ .rxdone_tasklet = rt2800pci_rxdone_tasklet,
+ .autowake_tasklet = rt2800pci_autowake_tasklet,
.probe_hw = rt2800pci_probe_hw,
.get_firmware_name = rt2800pci_get_firmware_name,
.check_firmware = rt2800_check_firmware,
--
1.7.2.3
next prev parent reply other threads:[~2011-01-30 12:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-30 12:16 [PATCH 01/21] rt2x00: Refactor beacon code to make use of start- and stop_queue Ivo van Doorn
2011-01-30 12:16 ` [PATCH 02/21] rt2x00: Introduce beacon_update_locked that requires caller locking Ivo van Doorn
2011-01-30 12:16 ` [PATCH 03/21] rt2x00: Limit beacon updates in bss_info_changed to USB devices Ivo van Doorn
2011-01-30 12:17 ` [PATCH 04/21] rt2x00: Make periodic beacon updates for PCI devices atomic Ivo van Doorn
2011-01-30 12:17 ` [PATCH 05/21] rt2x00: Introduce tasklets for interrupt handling Ivo van Doorn
2011-01-30 12:18 ` [PATCH 06/21] rt2x00: Disable txstatus tasklet by default Ivo van Doorn
2011-01-30 12:18 ` Ivo van Doorn [this message]
2011-01-30 12:19 ` [PATCH 08/21] rt2x00: Convert rt61pci to use tasklets Ivo van Doorn
2011-01-30 12:19 ` [PATCH 09/21] rt2x00: Convert rt2500pci interrupt handling " Ivo van Doorn
2011-01-30 12:20 ` [PATCH 10/21] rt2x00: Convert rt2400pci " Ivo van Doorn
2011-01-30 12:20 ` [PATCH 11/21] rt2x00: Remove interrupt thread registration Ivo van Doorn
2011-01-30 12:20 ` [PATCH 12/21] rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR Ivo van Doorn
2011-01-30 12:21 ` [PATCH 13/21] rt2x00: Correct initial value of US_CYC_CNT register for pcie interface Ivo van Doorn
2011-01-30 12:21 ` [PATCH 14/21] rt2x00: Update MAINTAINERS Ivo van Doorn
2011-01-30 12:22 ` [PATCH 15/21] Trivial typo fix in comment Ivo van Doorn
2011-01-30 12:22 ` [PATCH 16/21] rt2x00: trivial: add \n to WARNING message Ivo van Doorn
2011-01-30 12:22 ` [PATCH 17/21] rt2x00: Fix WPA TKIP Michael MIC failures Ivo van Doorn
2011-01-30 12:23 ` [PATCH 18/21] rt2x00: Copy the MAC address to the WCID entry properly Ivo van Doorn
2011-01-30 12:23 ` [PATCH 19/21] rt2x00: Fix FIXME comments in rt61pci and rt73usb on Michael MIC Ivo van Doorn
2011-01-30 12:23 ` [PATCH 20/21] rt2x00: Kill all tasklets during device removal Ivo van Doorn
2011-01-30 12:24 ` [PATCH 21/21] rt2x00: Move TX/RX work into dedicated workqueue Ivo van Doorn
2011-02-17 18:16 ` [PATCH 17/21] rt2x00: Fix WPA TKIP Michael MIC failures Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201101301318.39263.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).