From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
"John W. Linville" <linville@tuxdriver.com>,
Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 00/22] zd1211rw: add support for AP-mode
Date: Mon, 31 Jan 2011 20:46:58 +0200 [thread overview]
Message-ID: <20110131184657.10044.98610.stgit@fate.lan> (raw)
This patchset adds AP-mode support to zd1211rw. Tested with zd1211b devices only.
Patches are mix of fixes and AP support adding code.
[1-2] fix oopses noticed while testing
[3] add missing locking
[4] fix beacon setup to match vendor driver (needed for AP mode)
[5-6] 'may sleep' cleanups, move code from workers to mac80211-functions
[7-11] AP-mode supporting code
[12-16] beacon setup fixes/workarounds
[17-20] device reset and device/TX/RX stall workarounds
[21] enable AP mode
[22] add more debuging output
---
Christian Lamparter (1):
mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc
Jussi Kivilinna (21):
zd1211rw: use urb anchors for tx and fix tx-queue disabling
zd1211rw: cancel process_intr work on zd_chip_disable_int()
zd1211rw: add locking for mac->process_intr
zd1211rw: fix beacon interval setup
zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter
zd1211rw: move set_rts_cts_work to bss_info_changed
zd1211rw: support setting BSSID for AP mode
zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor
zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag
zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc()
zd1211rw: add beacon watchdog and setting HW beacon more failsafe
zd1211rw: batch beacon config commands together
[v2] zd1211rw: use stack and preallocated memory for small cmd-buffers
zd1211rw: change interrupt URB buffer to DMA buffer
zd1211rw: lower hw command timeouts
zd1211rw: collect driver settings and add function to restore theim
zd1211rw: add TX watchdog and device resetting
zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup
zd1211rw: reset rx urbs after idle period of 30 seconds
zd1211rw: enable NL80211_IFTYPE_AP
zd1211rw: add useful debug output
drivers/net/wireless/zd1211rw/zd_chip.c | 134 ++++++---
drivers/net/wireless/zd1211rw/zd_chip.h | 5
drivers/net/wireless/zd1211rw/zd_mac.c | 448 ++++++++++++++++++++++++-------
drivers/net/wireless/zd1211rw/zd_mac.h | 24 +-
drivers/net/wireless/zd1211rw/zd_usb.c | 445 ++++++++++++++++++++++++-------
drivers/net/wireless/zd1211rw/zd_usb.h | 30 ++
net/mac80211/ieee80211_i.h | 1
net/mac80211/tx.c | 4
8 files changed, 822 insertions(+), 269 deletions(-)
next reply other threads:[~2011-01-31 18:47 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 18:46 Jussi Kivilinna [this message]
2011-01-31 18:47 ` [PATCH 01/22] zd1211rw: use urb anchors for tx and fix tx-queue disabling Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 02/22] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 03/22] zd1211rw: add locking for mac->process_intr Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 04/22] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 05/22] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 06/22] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 07/22] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 08/22] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 09/22] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 10/22] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 11/22] mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 12/22] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 13/22] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 14/22] [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 15/22] zd1211rw: change interrupt URB buffer to DMA buffer Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 16/22] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 17/22] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 18/22] zd1211rw: add TX watchdog and device resetting Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 19/22] zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 20/22] zd1211rw: reset rx urbs after idle period of 30 seconds Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 21/22] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 22/22] zd1211rw: add useful debug output Jussi Kivilinna
2011-02-04 14:06 ` [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-02-04 21:25 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110131184657.10044.98610.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).