From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
"John W. Linville" <linville@tuxdriver.com>,
Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 06/22] zd1211rw: move set_rts_cts_work to bss_info_changed
Date: Mon, 31 Jan 2011 20:47:56 +0200 [thread overview]
Message-ID: <20110131184756.10044.94093.stgit@fate.lan> (raw)
In-Reply-To: <20110131184657.10044.98610.stgit@fate.lan>
As bss_info_changed may sleep, we can as well set RTS_CTS register right away.
Keep mac->short_preamble for later use (hw reset).
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_mac.c | 27 +++++----------------------
drivers/net/wireless/zd1211rw/zd_mac.h | 3 ---
2 files changed, 5 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 75d9a13..487ed33 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -998,20 +998,9 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw,
* time. */
}
-static void set_rts_cts_work(struct work_struct *work)
+static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble)
{
- struct zd_mac *mac =
- container_of(work, struct zd_mac, set_rts_cts_work);
- unsigned long flags;
- unsigned int short_preamble;
-
mutex_lock(&mac->chip.mutex);
-
- spin_lock_irqsave(&mac->lock, flags);
- mac->updating_rts_rate = 0;
- short_preamble = mac->short_preamble;
- spin_unlock_irqrestore(&mac->lock, flags);
-
zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble);
mutex_unlock(&mac->chip.mutex);
}
@@ -1022,7 +1011,6 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
u32 changes)
{
struct zd_mac *mac = zd_hw_mac(hw);
- unsigned long flags;
int associated;
dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes);
@@ -1060,15 +1048,11 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
/* TODO: do hardware bssid filtering */
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
- spin_lock_irqsave(&mac->lock, flags);
+ spin_lock_irq(&mac->lock);
mac->short_preamble = bss_conf->use_short_preamble;
- if (!mac->updating_rts_rate) {
- mac->updating_rts_rate = 1;
- /* FIXME: should disable TX here, until work has
- * completed and RTS_CTS reg is updated */
- queue_work(zd_workqueue, &mac->set_rts_cts_work);
- }
- spin_unlock_irqrestore(&mac->lock, flags);
+ spin_unlock_irq(&mac->lock);
+
+ set_rts_cts(mac, bss_conf->use_short_preamble);
}
}
@@ -1142,7 +1126,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
zd_chip_init(&mac->chip, hw, intf);
housekeeping_init(mac);
- INIT_WORK(&mac->set_rts_cts_work, set_rts_cts_work);
INIT_WORK(&mac->process_intr, zd_process_intr);
SET_IEEE80211_DEV(hw, &intf->dev);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index f28ecb9..ff7ef30 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -189,9 +189,6 @@ struct zd_mac {
/* Short preamble (used for RTS/CTS) */
unsigned int short_preamble:1;
- /* flags to indicate update in progress */
- unsigned int updating_rts_rate:1;
-
/* whether to pass frames with CRC errors to stack */
unsigned int pass_failed_fcs:1;
next prev parent reply other threads:[~2011-01-31 18:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 18:46 [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 01/22] zd1211rw: use urb anchors for tx and fix tx-queue disabling Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 02/22] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 03/22] zd1211rw: add locking for mac->process_intr Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 04/22] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 05/22] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-31 18:47 ` Jussi Kivilinna [this message]
2011-01-31 18:48 ` [PATCH 07/22] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 08/22] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 09/22] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 10/22] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 11/22] mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 12/22] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 13/22] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 14/22] [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 15/22] zd1211rw: change interrupt URB buffer to DMA buffer Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 16/22] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 17/22] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 18/22] zd1211rw: add TX watchdog and device resetting Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 19/22] zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 20/22] zd1211rw: reset rx urbs after idle period of 30 seconds Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 21/22] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 22/22] zd1211rw: add useful debug output Jussi Kivilinna
2011-02-04 14:06 ` [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-02-04 21:25 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110131184756.10044.94093.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).