From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
"John W. Linville" <linville@tuxdriver.com>,
Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 09/22] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag
Date: Mon, 31 Jan 2011 20:48:25 +0200 [thread overview]
Message-ID: <20110131184825.10044.55218.stgit@fate.lan> (raw)
In-Reply-To: <20110131184657.10044.98610.stgit@fate.lan>
Add support for AP-mode beacon. Also disable beacon when interface is set
down as otherwise hw will keep flooding NEXT_BCN interrupts.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_chip.c | 33 ++++++++++++++++++++++++++-----
drivers/net/wireless/zd1211rw/zd_chip.h | 4 +++-
drivers/net/wireless/zd1211rw/zd_mac.c | 17 ++++++++--------
3 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 71d3cde..d8dc927 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -888,14 +888,36 @@ static int set_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s)
}
-static int set_beacon_interval(struct zd_chip *chip, u32 interval)
+static int set_beacon_interval(struct zd_chip *chip, u16 interval,
+ u8 dtim_period, int type)
{
int r;
struct aw_pt_bi s;
+ u32 b_interval, mode_flag;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
- r = zd_iowrite32_locked(chip, interval, CR_BCN_INTERVAL);
+ if (interval > 0) {
+ switch (type) {
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ mode_flag = BCN_MODE_IBSS;
+ break;
+ case NL80211_IFTYPE_AP:
+ mode_flag = BCN_MODE_AP;
+ break;
+ default:
+ mode_flag = 0;
+ break;
+ }
+ } else {
+ dtim_period = 0;
+ mode_flag = 0;
+ }
+
+ b_interval = mode_flag | (dtim_period << 16) | interval;
+
+ r = zd_iowrite32_locked(chip, b_interval, CR_BCN_INTERVAL);
if (r)
return r;
r = get_aw_pt_bi(chip, &s);
@@ -904,12 +926,13 @@ static int set_beacon_interval(struct zd_chip *chip, u32 interval)
return set_aw_pt_bi(chip, &s);
}
-int zd_set_beacon_interval(struct zd_chip *chip, u32 interval)
+int zd_set_beacon_interval(struct zd_chip *chip, u16 interval, u8 dtim_period,
+ int type)
{
int r;
mutex_lock(&chip->mutex);
- r = set_beacon_interval(chip, interval);
+ r = set_beacon_interval(chip, interval, dtim_period, type);
mutex_unlock(&chip->mutex);
return r;
}
@@ -928,7 +951,7 @@ static int hw_init(struct zd_chip *chip)
if (r)
return r;
- return set_beacon_interval(chip, 100);
+ return set_beacon_interval(chip, 100, 0, NL80211_IFTYPE_UNSPECIFIED);
}
static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 7b0c58c..14e4402 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -546,6 +546,7 @@ enum {
#define RX_FILTER_CTRL (RX_FILTER_RTS | RX_FILTER_CTS | \
RX_FILTER_CFEND | RX_FILTER_CFACK)
+#define BCN_MODE_AP 0x1000000
#define BCN_MODE_IBSS 0x2000000
/* Monitor mode sets filter to 0xfffff */
@@ -921,7 +922,8 @@ enum led_status {
int zd_chip_control_leds(struct zd_chip *chip, enum led_status status);
-int zd_set_beacon_interval(struct zd_chip *chip, u32 interval);
+int zd_set_beacon_interval(struct zd_chip *chip, u16 interval, u8 dtim_period,
+ int type);
static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval)
{
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 84ac95e..1bd275b 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -926,7 +926,7 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw,
struct zd_mac *mac = zd_hw_mac(hw);
mac->type = NL80211_IFTYPE_UNSPECIFIED;
mac->vif = NULL;
- zd_set_beacon_interval(&mac->chip, 0);
+ zd_set_beacon_interval(&mac->chip, 0, 0, NL80211_IFTYPE_UNSPECIFIED);
zd_write_mac_addr(&mac->chip, NULL);
}
@@ -1058,15 +1058,16 @@ static void zd_op_bss_info_changed(struct ieee80211_hw *hw,
}
if (changes & BSS_CHANGED_BEACON_ENABLED) {
- u32 interval;
+ u16 interval = 0;
+ u8 period = 0;
- if (bss_conf->enable_beacon)
- interval = BCN_MODE_IBSS |
- bss_conf->beacon_int;
- else
- interval = 0;
+ if (bss_conf->enable_beacon) {
+ period = bss_conf->dtim_period;
+ interval = bss_conf->beacon_int;
+ }
- zd_set_beacon_interval(&mac->chip, interval);
+ zd_set_beacon_interval(&mac->chip, interval, period,
+ mac->type);
}
} else
associated = is_valid_ether_addr(bss_conf->bssid);
next prev parent reply other threads:[~2011-01-31 18:48 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 18:46 [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 01/22] zd1211rw: use urb anchors for tx and fix tx-queue disabling Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 02/22] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 03/22] zd1211rw: add locking for mac->process_intr Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 04/22] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 05/22] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 06/22] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 07/22] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 08/22] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-31 18:48 ` Jussi Kivilinna [this message]
2011-01-31 18:48 ` [PATCH 10/22] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 11/22] mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 12/22] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 13/22] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 14/22] [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 15/22] zd1211rw: change interrupt URB buffer to DMA buffer Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 16/22] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 17/22] zd1211rw: collect driver settings and add function to restore theim Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 18/22] zd1211rw: add TX watchdog and device resetting Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 19/22] zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 20/22] zd1211rw: reset rx urbs after idle period of 30 seconds Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 21/22] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 22/22] zd1211rw: add useful debug output Jussi Kivilinna
2011-02-04 14:06 ` [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-02-04 21:25 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110131184825.10044.55218.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).