From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: linux-wireless@vger.kernel.org
Cc: Daniel Drake <dsd@gentoo.org>,
"John W. Linville" <linville@tuxdriver.com>,
Ulrich Kunitz <kune@deine-taler.de>
Subject: [PATCH 17/22] zd1211rw: collect driver settings and add function to restore theim
Date: Mon, 31 Jan 2011 20:49:43 +0200 [thread overview]
Message-ID: <20110131184943.10044.47250.stgit@fate.lan> (raw)
In-Reply-To: <20110131184657.10044.98610.stgit@fate.lan>
We need HW hard reset later in patchset to reset device after TX-stall.
Collect all settings that we have set to driver for later reset and
add restore function.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/zd1211rw/zd_mac.c | 69 ++++++++++++++++++++++++++++++++
drivers/net/wireless/zd1211rw/zd_mac.h | 3 +
2 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 84ee1b8..e82f007 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -141,6 +141,9 @@ static void housekeeping_disable(struct zd_mac *mac);
static void beacon_init(struct zd_mac *mac);
static void beacon_enable(struct zd_mac *mac);
static void beacon_disable(struct zd_mac *mac);
+static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble);
+static int zd_mac_config_beacon(struct ieee80211_hw *hw,
+ struct sk_buff *beacon);
static int zd_reg2alpha2(u8 regdomain, char *alpha2)
{
@@ -339,6 +342,68 @@ static void zd_op_stop(struct ieee80211_hw *hw)
dev_kfree_skb_any(skb);
}
+int zd_restore_settings(struct zd_mac *mac)
+{
+ struct sk_buff *beacon;
+ struct zd_mc_hash multicast_hash;
+ unsigned int short_preamble;
+ int r, beacon_interval, beacon_period;
+ u8 channel;
+
+ dev_dbg_f(zd_mac_dev(mac), "\n");
+
+ spin_lock_irq(&mac->lock);
+ multicast_hash = mac->multicast_hash;
+ short_preamble = mac->short_preamble;
+ beacon_interval = mac->beacon.interval;
+ beacon_period = mac->beacon.period;
+ channel = mac->channel;
+ spin_unlock_irq(&mac->lock);
+
+ r = set_mac_and_bssid(mac);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n", r);
+ return r;
+ }
+
+ r = zd_chip_set_channel(&mac->chip, channel);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n",
+ r);
+ return r;
+ }
+
+ set_rts_cts(mac, short_preamble);
+
+ r = zd_chip_set_multicast_hash(&mac->chip, &multicast_hash);
+ if (r < 0) {
+ dev_dbg_f(zd_mac_dev(mac),
+ "zd_chip_set_multicast_hash failed, %d\n", r);
+ return r;
+ }
+
+ if (mac->type == NL80211_IFTYPE_MESH_POINT ||
+ mac->type == NL80211_IFTYPE_ADHOC ||
+ mac->type == NL80211_IFTYPE_AP) {
+ if (mac->vif != NULL) {
+ beacon = ieee80211_beacon_get(mac->hw, mac->vif);
+ if (beacon) {
+ zd_mac_config_beacon(mac->hw, beacon);
+ kfree_skb(beacon);
+ }
+ }
+
+ zd_set_beacon_interval(&mac->chip, beacon_interval,
+ beacon_period, mac->type);
+
+ spin_lock_irq(&mac->lock);
+ mac->beacon.last_update = jiffies;
+ spin_unlock_irq(&mac->lock);
+ }
+
+ return 0;
+}
+
/**
* zd_mac_tx_status - reports tx status of a packet if required
* @hw - a &struct ieee80211_hw pointer
@@ -988,6 +1053,10 @@ static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
struct zd_mac *mac = zd_hw_mac(hw);
struct ieee80211_conf *conf = &hw->conf;
+ spin_lock_irq(&mac->lock);
+ mac->channel = conf->channel->hw_value;
+ spin_unlock_irq(&mac->lock);
+
return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
}
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 281b307..c0f239e 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -192,6 +192,7 @@ struct zd_mac {
u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
u8 regdomain;
u8 default_regdomain;
+ u8 channel;
int type;
int associated;
unsigned long flags;
@@ -313,6 +314,8 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
void zd_mac_tx_failed(struct urb *urb);
void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
+int zd_restore_settings(struct zd_mac *mac);
+
#ifdef DEBUG
void zd_dump_rx_status(const struct rx_status *status);
#else
next prev parent reply other threads:[~2011-01-31 18:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-31 18:46 [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 01/22] zd1211rw: use urb anchors for tx and fix tx-queue disabling Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 02/22] zd1211rw: cancel process_intr work on zd_chip_disable_int() Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 03/22] zd1211rw: add locking for mac->process_intr Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 04/22] zd1211rw: fix beacon interval setup Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 05/22] zd1211rw: move set_multicast_hash and set_rx_filter from workers to configure_filter Jussi Kivilinna
2011-01-31 18:47 ` [PATCH 06/22] zd1211rw: move set_rts_cts_work to bss_info_changed Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 07/22] zd1211rw: support setting BSSID for AP mode Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 08/22] zd1211rw: fix ack_pending in filter_ack causing tx-packet ordering problem on monitor Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 09/22] zd1211rw: let zd_set_beacon_interval() set dtim_period and add AP-beacon flag Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 10/22] zd1211rw: implement beacon fetching and handling ieee80211_get_buffered_bc() Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 11/22] mac80211: fix race between next beacon dtim and ieee80211_get_buffered_bc Jussi Kivilinna
2011-01-31 18:48 ` [PATCH 12/22] zd1211rw: add beacon watchdog and setting HW beacon more failsafe Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 13/22] zd1211rw: batch beacon config commands together Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 14/22] [v2] zd1211rw: use stack and preallocated memory for small cmd-buffers Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 15/22] zd1211rw: change interrupt URB buffer to DMA buffer Jussi Kivilinna
2011-01-31 18:49 ` [PATCH 16/22] zd1211rw: lower hw command timeouts Jussi Kivilinna
2011-01-31 18:49 ` Jussi Kivilinna [this message]
2011-01-31 18:49 ` [PATCH 18/22] zd1211rw: add TX watchdog and device resetting Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 19/22] zd1211rw: reset device when CR_BCN_FIFO_SEMAPHORE freezes in beacon setup Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 20/22] zd1211rw: reset rx urbs after idle period of 30 seconds Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 21/22] zd1211rw: enable NL80211_IFTYPE_AP Jussi Kivilinna
2011-01-31 18:50 ` [PATCH 22/22] zd1211rw: add useful debug output Jussi Kivilinna
2011-02-04 14:06 ` [PATCH 00/22] zd1211rw: add support for AP-mode Jussi Kivilinna
2011-02-04 21:25 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110131184943.10044.47250.stgit@fate.lan \
--to=jussi.kivilinna@mbnet.fi \
--cc=dsd@gentoo.org \
--cc=kune@deine-taler.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).