[PATCH] ath5k: Correct channel setting for AR2317 chip

[Nikolay Ledovskikh <nledovskikh@gmail.com>]

Correct channel setting function must be used for AR2317.
When I tested ahb patch on bullet2 all seemed to work fine, 
but it couldn't connect another host (using ibss for example). 
During an analysis I observed that it's transmitting on another 
channel. I looked into madwifi code and understood that
the problem is in channel setting function. So atheros RF2317 not 
fully handled in the current ath5k version and must be patched.

Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com>
---
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 78c26fd..c44111f 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
 	case AR5K_RF5111:
 		ret = ath5k_hw_rf5111_channel(ah, channel);
 		break;
+	case AR5K_RF2317:
 	case AR5K_RF2425:
 		ret = ath5k_hw_rf2425_channel(ah, channel);
 		break;