From: Ivo van Doorn <ivdoorn@gmail.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com
Subject: [PATCH 14/23] rt2x00: Linksys WUSB600N rev2 is a RT3572 device.
Date: Mon, 18 Apr 2011 15:31:50 +0200 [thread overview]
Message-ID: <201104181531.51867.IvDoorn@gmail.com> (raw)
In-Reply-To: <201104181531.32313.IvDoorn@gmail.com>
From: Gertjan van Wingerde <gwingerde@gmail.com>
Move the USB ID entry from the unknown devices to the list of RT35xx based
devices.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800usb.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 2005972..1bb9a7d 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -983,6 +983,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Linksys */
{ USB_DEVICE(0x13b1, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
+ { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Ralink */
{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Sitecom */
@@ -1041,7 +1042,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
/* Linksys */
{ USB_DEVICE(0x1737, 0x0077), USB_DEVICE_DATA(&rt2800usb_ops) },
{ USB_DEVICE(0x1737, 0x0078), USB_DEVICE_DATA(&rt2800usb_ops) },
- { USB_DEVICE(0x1737, 0x0079), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Motorola */
{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
/* Ovislink */
--
1.7.2.3
next prev parent reply other threads:[~2011-04-18 13:36 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-18 13:26 [PATCH 01/23] Enable WLAN LED on Ralink SoC (rt305x) devices Ivo van Doorn
2011-04-18 13:26 ` [PATCH 02/23] rt2x00: Fix stuck queue in tx failure case Ivo van Doorn
2011-04-18 13:27 ` [PATCH 03/23] rt2x00: Split rt2x00dev->flags Ivo van Doorn
2011-04-18 13:27 ` [PATCH 04/23] rt2x00: Make rt2x00_queue_entry_for_each more flexible Ivo van Doorn
2011-04-18 13:28 ` [PATCH 05/23] rt2x00: Use correct TBTT_SYNC config in AP mode Ivo van Doorn
2011-04-18 13:28 ` [PATCH 06/23] rt2x00: Update TX_SW_CFG2 init value Ivo van Doorn
2011-04-18 13:28 ` [PATCH 07/23] rt2x00: Use TXOP_HTTXOP for beacons Ivo van Doorn
2011-04-18 13:29 ` [PATCH 08/23] rt2800usb: read TX_STA_FIFO asynchronously Ivo van Doorn
2011-04-18 13:29 ` [PATCH 09/23] rt2x00: fix queue timeout checks Ivo van Doorn
2011-04-18 13:30 ` [PATCH 10/23] rt2800usb: handle TX status timeouts Ivo van Doorn
2011-04-18 13:30 ` [PATCH 11/23] rt2800usb: add timer to handle TX_STA_FIFO Ivo van Doorn
2011-04-18 13:31 ` [PATCH 12/23] Decrease association time for USB devices Ivo van Doorn
2011-04-18 13:31 ` [PATCH 13/23] rt2x00: Always inline rt2x00pci_enable_interrupt Ivo van Doorn
2011-04-18 13:31 ` Ivo van Doorn [this message]
2011-04-18 13:32 ` [PATCH 15/23] rt2x00: Allow dynamic addition of PCI/USB IDs Ivo van Doorn
2011-04-18 13:32 ` [PATCH 16/23] rt2x00: Add USB IDs Ivo van Doorn
2011-04-18 13:33 ` [PATCH 17/23] rt2x00: RT33xx device support is no longer experimental Ivo van Doorn
2011-04-18 13:33 ` [PATCH 18/23] rt2x00: Enable support for RT53xx PCI devices by default Ivo van Doorn
2011-04-18 13:33 ` [PATCH 19/23] rt2x00: Merge rt2x00ht.c contents in other files Ivo van Doorn
2011-04-18 13:34 ` [PATCH 20/23] rt2x00: Optimize register access in rt2800pci Ivo van Doorn
2011-04-18 13:34 ` [PATCH 21/23] rt2x00: Optimize register access in rt2800usb Ivo van Doorn
2011-04-18 13:34 ` [PATCH 22/23] rt2x00: Implement get_ringparam callback function Ivo van Doorn
2011-04-18 13:35 ` [PATCH 23/23] rt2x00: Implement get_antenna and set_antenna callback functions Ivo van Doorn
2011-04-18 13:56 ` [PATCH 21/23] rt2x00: Optimize register access in rt2800usb Rafał Miłecki
2011-04-18 14:06 ` Ivo Van Doorn
2011-04-18 14:14 ` Rafał Miłecki
2011-04-18 14:48 ` Helmut Schaa
2011-04-18 15:02 ` Rafał Miłecki
2011-04-28 2:55 ` [PATCH 04/23] rt2x00: Make rt2x00_queue_entry_for_each more flexible Yasushi SHOJI
2011-04-28 2:55 ` Yasushi SHOJI
2011-04-28 18:55 ` Ivo Van Doorn
2011-04-29 6:06 ` Gertjan van Wingerde
2011-04-30 14:01 ` Ivo van Doorn
2011-05-02 13:33 ` Yasushi SHOJI
2011-05-02 19:24 ` Ivo van Doorn
2011-05-09 8:08 ` Yasushi SHOJI
2011-05-09 8:50 ` Ivo Van Doorn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201104181531.51867.IvDoorn@gmail.com \
--to=ivdoorn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=users@rt2x00.serialmonkey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).