linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V2 00/22] Add support for AR9340
@ 2011-04-19 13:58 Vasanthakumar Thiagarajan
  2011-04-19 13:59 ` [PATCH V2 02/22] ath9k_hw: Take care of few host interface register changes " Vasanthakumar Thiagarajan
                   ` (16 more replies)
  0 siblings, 17 replies; 20+ messages in thread
From: Vasanthakumar Thiagarajan @ 2011-04-19 13:58 UTC (permalink / raw)
  To: linville; +Cc: linux-wireless

John,

This patch set mainly adds support for AR9340 which is a built in
wireless mac in ar934x SOCs. It is 2x2, 2.4Ghz only in ar9341 SOC and
dual band in ar9342/ar9344 SOCs. This V2 has updated patch 03/22.

Vasanth

Vasanthakumar Thiagarajan (22):
  ath9k_hw: Define devid and mac version for AR9340
  ath9k_hw: Take care of few host interface register changes for AR9340
  ath9k_hw: Get AHB clock information from ath9k_platform_data
  ath9k_hw: Configure pll control register accordingly for AR9340
  ath9k_hw: Add initvals.h for ar9340
  ath9k_hw: Initialize mode registers from initvals.h for AR9340
  ath9k_hw: Don't do ani initialization for AR9340
  ath9k_hw: Initialize tx and rx gain table from initvals.h for ar9340
  ath9k_hw: Read spur frequency information from eeprom for AR9340
  ath9k_hw: Configure RF channel freqency for AR9340
  ath9k_hw: Clean up rx/tx chain configuration before AGC/IQ cal
  ath9k_hw: Fix register offset AR_PHY_65NM_CH0_THERM for AR9340
  ath9k_hw: Don't configure AR_CH0_THERM for AR9340
  ath9k_hw: Skip internal regulator configuration for AR9340
  ath9k_hw: Configure tuning capacitance value for AR9340 as well
  ath9k_hw: Enable byte Tx/Rx data swap for AR9340
  ath9k_hw: Configure chain switch table and attenuation control only
    for active chains
  ath9k_hw: Read iq calibration data only for active chains
  ath9k: Add AR9340 platform id to id table
  ath9k_hw: Assign macversion based on devid for built-in wmac
  ath9k_hw: Disable INTR_HOST1_FATAL to avoid interrupt strom with
    ar9430
  ath9k_hw: Enable AR9340 support

 drivers/net/wireless/ath/ath9k/ahb.c             |    4 +
 drivers/net/wireless/ath/ath9k/ar9003_calib.c    |   37 +-
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c   |   59 +-
 drivers/net/wireless/ath/ath9k/ar9003_hw.c       |  101 ++-
 drivers/net/wireless/ath/ath9k/ar9003_phy.c      |   30 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.h      |    2 +-
 drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 1525 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/hw.c              |   82 +-
 drivers/net/wireless/ath/ath9k/hw.h              |    6 +-
 drivers/net/wireless/ath/ath9k/init.c            |    1 +
 drivers/net/wireless/ath/ath9k/mac.c             |   10 +-
 drivers/net/wireless/ath/ath9k/phy.h             |    3 +
 drivers/net/wireless/ath/ath9k/reg.h             |   81 +-
 include/linux/ath9k_platform.h                   |    2 +
 14 files changed, 1842 insertions(+), 101 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar9340_initvals.h


^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2011-04-20  4:35 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-19 13:58 [PATCH V2 00/22] Add support for AR9340 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 02/22] ath9k_hw: Take care of few host interface register changes " Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 03/22] ath9k_hw: Get AHB clock information from ath9k_platform_data Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 04/22] ath9k_hw: Configure pll control register accordingly for AR9340 Vasanthakumar Thiagarajan
2011-04-19 14:13   ` Sujith
2011-04-20  4:35     ` Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 05/22] ath9k_hw: Add initvals.h for ar9340 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 08/22] ath9k_hw: Initialize tx and rx gain table from " Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 09/22] ath9k_hw: Read spur frequency information from eeprom for AR9340 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 10/22] ath9k_hw: Configure RF channel freqency " Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 11/22] ath9k_hw: Clean up rx/tx chain configuration before AGC/IQ cal Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 13/22] ath9k_hw: Don't configure AR_CH0_THERM for AR9340 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 14/22] ath9k_hw: Skip internal regulator configuration " Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 15/22] ath9k_hw: Configure tuning capacitance value for AR9340 as well Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 16/22] ath9k_hw: Enable byte Tx/Rx data swap for AR9340 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 17/22] ath9k_hw: Configure chain switch table and attenuation control only for active chains Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 18/22] ath9k_hw: Read iq calibration data " Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 19/22] ath9k: Add AR9340 platform id to id table Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 21/22] ath9k_hw: Disable INTR_HOST1_FATAL to avoid interrupt strom with ar9430 Vasanthakumar Thiagarajan
2011-04-19 13:59 ` [PATCH V2 22/22] ath9k_hw: Enable AR9340 support Vasanthakumar Thiagarajan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).