* [PATCH 7/7] staging: brcm80211: Remove si sb utils from brcmfmac
2011-04-25 22:45 [PATCH 0/7] staging: brcm80211: remove si sb utils dependency from brcmfmac Franky Lin
` (5 preceding siblings ...)
2011-04-25 22:45 ` [PATCH 6/7] staging: brcm80211: Remove siutils dependence from dhd_sdio.c Franky Lin
@ 2011-04-25 22:45 ` Franky Lin
2011-04-25 23:40 ` [PATCH 0/7] staging: brcm80211: remove si sb utils dependency " Greg KH
7 siblings, 0 replies; 9+ messages in thread
From: Franky Lin @ 2011-04-25 22:45 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-wireless, brudley, henryp, hharte
si/sb utility is removed from Broadcom fullmac driver.
All unused files are removed.
Signed-off-by: Franky Lin <frankyl@broadcom.com>
---
drivers/staging/brcm80211/brcmfmac/Makefile | 3 -
drivers/staging/brcm80211/brcmfmac/bcmsdh.c | 1 -
drivers/staging/brcm80211/brcmfmac/dhd_pmu.c | 780 -------------
drivers/staging/brcm80211/brcmfmac/dhd_pmu.h | 52 -
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c | 3 -
drivers/staging/brcm80211/brcmfmac/sbutils.c | 1 -
drivers/staging/brcm80211/brcmfmac/siutils.c | 1 -
drivers/staging/brcm80211/util/bcmutils.c | 1 -
drivers/staging/brcm80211/util/sbutils.c | 462 --------
drivers/staging/brcm80211/util/siutils.c | 1490 -------------------------
drivers/staging/brcm80211/util/siutils_priv.h | 30 -
11 files changed, 0 insertions(+), 2824 deletions(-)
delete mode 100644 drivers/staging/brcm80211/brcmfmac/dhd_pmu.c
delete mode 100644 drivers/staging/brcm80211/brcmfmac/dhd_pmu.h
delete mode 100644 drivers/staging/brcm80211/brcmfmac/sbutils.c
delete mode 100644 drivers/staging/brcm80211/brcmfmac/siutils.c
delete mode 100644 drivers/staging/brcm80211/util/sbutils.c
delete mode 100644 drivers/staging/brcm80211/util/siutils.c
delete mode 100644 drivers/staging/brcm80211/util/siutils_priv.h
diff --git a/drivers/staging/brcm80211/brcmfmac/Makefile b/drivers/staging/brcm80211/brcmfmac/Makefile
index c3a4d91..4adbc4e 100644
--- a/drivers/staging/brcm80211/brcmfmac/Makefile
+++ b/drivers/staging/brcm80211/brcmfmac/Makefile
@@ -48,13 +48,10 @@ DHDOFILES = \
dhd_sdio.o \
dhd_linux.o \
dhd_linux_sched.o \
- dhd_pmu.o \
bcmsdh.o \
bcmsdh_linux.o \
bcmsdh_sdmmc.o \
bcmsdh_sdmmc_linux.o \
- siutils.o \
- sbutils.o \
bcmutils.o \
bcmwifi.o
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
index 5093564..3750fcf 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c
@@ -22,7 +22,6 @@
#include <bcmdevs.h>
#include <bcmutils.h>
#include <hndsoc.h>
-#include <siutils.h>
#include <bcmsdh.h> /* BRCM API for SDIO
clients (such as wl, dhd) */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_pmu.c b/drivers/staging/brcm80211/brcmfmac/dhd_pmu.c
deleted file mode 100644
index 2318387..0000000
--- a/drivers/staging/brcm80211/brcmfmac/dhd_pmu.c
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <bcmdefs.h>
-#include <bcmutils.h>
-#include <siutils.h>
-#include <bcmdevs.h>
-#include <hndsoc.h>
-#include <sbchipc.h>
-#include "dngl_stats.h"
-#include "dhd.h"
-#include "dhd_pmu.h"
-#include "siutils_priv.h"
-
-#define PMU_ERROR(args)
-
-#ifdef BCMDBG
-#define PMU_MSG(args) printk args
-
-/* debug-only definitions */
-/* #define BCMDBG_FORCEHT */
-#else
-#define PMU_MSG(args)
-#endif /* BCMDBG */
-
-/* To check in verbose debugging messages not intended
- * to be on except on private builds.
- */
-#define PMU_NONE(args)
-
-/* PLL controls/clocks */
-static u32 si_pmu1_alpclk0(si_t *sih, chipcregs_t *cc);
-
-/* PMU resources */
-static u32 si_pmu_res_deps(si_t *sih, chipcregs_t *cc, u32 rsrcs, bool all);
-static uint si_pmu_res_uptime(si_t *sih, chipcregs_t *cc, u8 rsrc);
-static void si_pmu_res_masks(si_t *sih, u32 * pmin, u32 * pmax);
-
-/* d11 slow to fast clock transition time in slow clock cycles */
-#define D11SCC_SLOW2FAST_TRANSITION 2
-
-u16 si_pmu_fast_pwrup_delay(si_t *sih)
-{
- uint delay = PMU_MAX_TRANSITION_DLY;
- chipcregs_t *cc;
- uint origidx;
-#ifdef BCMDBG
- char chn[8];
- chn[0] = 0; /* to suppress compile error */
-#endif
-
- ASSERT(sih->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = si_coreidx(sih);
- cc = si_setcoreidx(sih, SI_CC_IDX);
- ASSERT(cc != NULL);
-
- switch (sih->chip) {
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- case BCM43421_CHIP_ID:
- case BCM43235_CHIP_ID:
- case BCM43236_CHIP_ID:
- case BCM43238_CHIP_ID:
- case BCM4331_CHIP_ID:
- case BCM6362_CHIP_ID:
- case BCM4313_CHIP_ID:
- delay = ISSIM_ENAB(sih) ? 70 : 3700;
- break;
- case BCM4329_CHIP_ID:
- if (ISSIM_ENAB(sih))
- delay = 70;
- else {
- u32 ilp = si_ilp_clock(sih);
- delay =
- (si_pmu_res_uptime(sih, cc, RES4329_HT_AVAIL) +
- D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp -
- 1) / ilp);
- delay = (11 * delay) / 10;
- }
- break;
- case BCM4319_CHIP_ID:
- delay = ISSIM_ENAB(sih) ? 70 : 3700;
- break;
- case BCM4336_CHIP_ID:
- if (ISSIM_ENAB(sih))
- delay = 70;
- else {
- u32 ilp = si_ilp_clock(sih);
- delay =
- (si_pmu_res_uptime(sih, cc, RES4336_HT_AVAIL) +
- D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp -
- 1) / ilp);
- delay = (11 * delay) / 10;
- }
- break;
- case BCM4330_CHIP_ID:
- if (ISSIM_ENAB(sih))
- delay = 70;
- else {
- u32 ilp = si_ilp_clock(sih);
- delay =
- (si_pmu_res_uptime(sih, cc, RES4330_HT_AVAIL) +
- D11SCC_SLOW2FAST_TRANSITION) * ((1000000 + ilp -
- 1) / ilp);
- delay = (11 * delay) / 10;
- }
- break;
- default:
- break;
- }
- /* Return to original core */
- si_setcoreidx(sih, origidx);
-
- return (u16) delay;
-}
-
-/* setup pll and query clock speed */
-typedef struct {
- u16 freq;
- u8 xf;
- u8 wbint;
- u32 wbfrac;
-} pmu0_xtaltab0_t;
-
-/* the following table is based on 880Mhz fvco */
-static const pmu0_xtaltab0_t pmu0_xtaltab0[] = {
- {
- 12000, 1, 73, 349525}, {
- 13000, 2, 67, 725937}, {
- 14400, 3, 61, 116508}, {
- 15360, 4, 57, 305834}, {
- 16200, 5, 54, 336579}, {
- 16800, 6, 52, 399457}, {
- 19200, 7, 45, 873813}, {
- 19800, 8, 44, 466033}, {
- 20000, 9, 44, 0}, {
- 25000, 10, 70, 419430}, {
- 26000, 11, 67, 725937}, {
- 30000, 12, 58, 699050}, {
- 38400, 13, 45, 873813}, {
- 40000, 14, 45, 0}, {
- 0, 0, 0, 0}
-};
-
-#define PMU0_XTAL0_DEFAULT 8
-
-/* setup pll and query clock speed */
-typedef struct {
- u16 fref;
- u8 xf;
- u8 p1div;
- u8 p2div;
- u8 ndiv_int;
- u32 ndiv_frac;
-} pmu1_xtaltab0_t;
-
-static const pmu1_xtaltab0_t pmu1_xtaltab0_880_4329[] = {
- {
- 12000, 1, 3, 22, 0x9, 0xFFFFEF}, {
- 13000, 2, 1, 6, 0xb, 0x483483}, {
- 14400, 3, 1, 10, 0xa, 0x1C71C7}, {
- 15360, 4, 1, 5, 0xb, 0x755555}, {
- 16200, 5, 1, 10, 0x5, 0x6E9E06}, {
- 16800, 6, 1, 10, 0x5, 0x3Cf3Cf}, {
- 19200, 7, 1, 4, 0xb, 0x755555}, {
- 19800, 8, 1, 11, 0x4, 0xA57EB}, {
- 20000, 9, 1, 11, 0x4, 0x0}, {
- 24000, 10, 3, 11, 0xa, 0x0}, {
- 25000, 11, 5, 16, 0xb, 0x0}, {
- 26000, 12, 1, 1, 0x21, 0xD89D89}, {
- 30000, 13, 3, 8, 0xb, 0x0}, {
- 37400, 14, 3, 1, 0x46, 0x969696}, {
- 38400, 15, 1, 1, 0x16, 0xEAAAAA}, {
- 40000, 16, 1, 2, 0xb, 0}, {
- 0, 0, 0, 0, 0, 0}
-};
-
-/* the following table is based on 880Mhz fvco */
-static const pmu1_xtaltab0_t pmu1_xtaltab0_880[] = {
- {
- 12000, 1, 3, 22, 0x9, 0xFFFFEF}, {
- 13000, 2, 1, 6, 0xb, 0x483483}, {
- 14400, 3, 1, 10, 0xa, 0x1C71C7}, {
- 15360, 4, 1, 5, 0xb, 0x755555}, {
- 16200, 5, 1, 10, 0x5, 0x6E9E06}, {
- 16800, 6, 1, 10, 0x5, 0x3Cf3Cf}, {
- 19200, 7, 1, 4, 0xb, 0x755555}, {
- 19800, 8, 1, 11, 0x4, 0xA57EB}, {
- 20000, 9, 1, 11, 0x4, 0x0}, {
- 24000, 10, 3, 11, 0xa, 0x0}, {
- 25000, 11, 5, 16, 0xb, 0x0}, {
- 26000, 12, 1, 2, 0x10, 0xEC4EC4}, {
- 30000, 13, 3, 8, 0xb, 0x0}, {
- 33600, 14, 1, 2, 0xd, 0x186186}, {
- 38400, 15, 1, 2, 0xb, 0x755555}, {
- 40000, 16, 1, 2, 0xb, 0}, {
- 0, 0, 0, 0, 0, 0}
-};
-
-#define PMU1_XTALTAB0_880_12000K 0
-#define PMU1_XTALTAB0_880_13000K 1
-#define PMU1_XTALTAB0_880_14400K 2
-#define PMU1_XTALTAB0_880_15360K 3
-#define PMU1_XTALTAB0_880_16200K 4
-#define PMU1_XTALTAB0_880_16800K 5
-#define PMU1_XTALTAB0_880_19200K 6
-#define PMU1_XTALTAB0_880_19800K 7
-#define PMU1_XTALTAB0_880_20000K 8
-#define PMU1_XTALTAB0_880_24000K 9
-#define PMU1_XTALTAB0_880_25000K 10
-#define PMU1_XTALTAB0_880_26000K 11
-#define PMU1_XTALTAB0_880_30000K 12
-#define PMU1_XTALTAB0_880_37400K 13
-#define PMU1_XTALTAB0_880_38400K 14
-#define PMU1_XTALTAB0_880_40000K 15
-
-/* the following table is based on 1760Mhz fvco */
-static const pmu1_xtaltab0_t pmu1_xtaltab0_1760[] = {
- {
- 12000, 1, 3, 44, 0x9, 0xFFFFEF}, {
- 13000, 2, 1, 12, 0xb, 0x483483}, {
- 14400, 3, 1, 20, 0xa, 0x1C71C7}, {
- 15360, 4, 1, 10, 0xb, 0x755555}, {
- 16200, 5, 1, 20, 0x5, 0x6E9E06}, {
- 16800, 6, 1, 20, 0x5, 0x3Cf3Cf}, {
- 19200, 7, 1, 18, 0x5, 0x17B425}, {
- 19800, 8, 1, 22, 0x4, 0xA57EB}, {
- 20000, 9, 1, 22, 0x4, 0x0}, {
- 24000, 10, 3, 22, 0xa, 0x0}, {
- 25000, 11, 5, 32, 0xb, 0x0}, {
- 26000, 12, 1, 4, 0x10, 0xEC4EC4}, {
- 30000, 13, 3, 16, 0xb, 0x0}, {
- 38400, 14, 1, 10, 0x4, 0x955555}, {
- 40000, 15, 1, 4, 0xb, 0}, {
- 0, 0, 0, 0, 0, 0}
-};
-
-/* table index */
-#define PMU1_XTALTAB0_1760_12000K 0
-#define PMU1_XTALTAB0_1760_13000K 1
-#define PMU1_XTALTAB0_1760_14400K 2
-#define PMU1_XTALTAB0_1760_15360K 3
-#define PMU1_XTALTAB0_1760_16200K 4
-#define PMU1_XTALTAB0_1760_16800K 5
-#define PMU1_XTALTAB0_1760_19200K 6
-#define PMU1_XTALTAB0_1760_19800K 7
-#define PMU1_XTALTAB0_1760_20000K 8
-#define PMU1_XTALTAB0_1760_24000K 9
-#define PMU1_XTALTAB0_1760_25000K 10
-#define PMU1_XTALTAB0_1760_26000K 11
-#define PMU1_XTALTAB0_1760_30000K 12
-#define PMU1_XTALTAB0_1760_38400K 13
-#define PMU1_XTALTAB0_1760_40000K 14
-
-/* the following table is based on 1440Mhz fvco */
-static const pmu1_xtaltab0_t pmu1_xtaltab0_1440[] = {
- {
- 12000, 1, 1, 1, 0x78, 0x0}, {
- 13000, 2, 1, 1, 0x6E, 0xC4EC4E}, {
- 14400, 3, 1, 1, 0x64, 0x0}, {
- 15360, 4, 1, 1, 0x5D, 0xC00000}, {
- 16200, 5, 1, 1, 0x58, 0xE38E38}, {
- 16800, 6, 1, 1, 0x55, 0xB6DB6D}, {
- 19200, 7, 1, 1, 0x4B, 0}, {
- 19800, 8, 1, 1, 0x48, 0xBA2E8B}, {
- 20000, 9, 1, 1, 0x48, 0x0}, {
- 25000, 10, 1, 1, 0x39, 0x999999}, {
- 26000, 11, 1, 1, 0x37, 0x627627}, {
- 30000, 12, 1, 1, 0x30, 0x0}, {
- 37400, 13, 2, 1, 0x4D, 0x15E76}, {
- 38400, 13, 2, 1, 0x4B, 0x0}, {
- 40000, 14, 2, 1, 0x48, 0x0}, {
- 48000, 15, 2, 1, 0x3c, 0x0}, {
- 0, 0, 0, 0, 0, 0}
-};
-
-/* table index */
-#define PMU1_XTALTAB0_1440_12000K 0
-#define PMU1_XTALTAB0_1440_13000K 1
-#define PMU1_XTALTAB0_1440_14400K 2
-#define PMU1_XTALTAB0_1440_15360K 3
-#define PMU1_XTALTAB0_1440_16200K 4
-#define PMU1_XTALTAB0_1440_16800K 5
-#define PMU1_XTALTAB0_1440_19200K 6
-#define PMU1_XTALTAB0_1440_19800K 7
-#define PMU1_XTALTAB0_1440_20000K 8
-#define PMU1_XTALTAB0_1440_25000K 9
-#define PMU1_XTALTAB0_1440_26000K 10
-#define PMU1_XTALTAB0_1440_30000K 11
-#define PMU1_XTALTAB0_1440_37400K 12
-#define PMU1_XTALTAB0_1440_38400K 13
-#define PMU1_XTALTAB0_1440_40000K 14
-#define PMU1_XTALTAB0_1440_48000K 15
-
-#define XTAL_FREQ_24000MHZ 24000
-#define XTAL_FREQ_30000MHZ 30000
-#define XTAL_FREQ_37400MHZ 37400
-#define XTAL_FREQ_48000MHZ 48000
-
-static const pmu1_xtaltab0_t pmu1_xtaltab0_960[] = {
- {
- 12000, 1, 1, 1, 0x50, 0x0}, {
- 13000, 2, 1, 1, 0x49, 0xD89D89}, {
- 14400, 3, 1, 1, 0x42, 0xAAAAAA}, {
- 15360, 4, 1, 1, 0x3E, 0x800000}, {
- 16200, 5, 1, 1, 0x39, 0x425ED0}, {
- 16800, 6, 1, 1, 0x39, 0x249249}, {
- 19200, 7, 1, 1, 0x32, 0x0}, {
- 19800, 8, 1, 1, 0x30, 0x7C1F07}, {
- 20000, 9, 1, 1, 0x30, 0x0}, {
- 25000, 10, 1, 1, 0x26, 0x666666}, {
- 26000, 11, 1, 1, 0x24, 0xEC4EC4}, {
- 30000, 12, 1, 1, 0x20, 0x0}, {
- 37400, 13, 2, 1, 0x33, 0x563EF9}, {
- 38400, 14, 2, 1, 0x32, 0x0}, {
- 40000, 15, 2, 1, 0x30, 0x0}, {
- 48000, 16, 2, 1, 0x28, 0x0}, {
- 0, 0, 0, 0, 0, 0}
-};
-
-/* table index */
-#define PMU1_XTALTAB0_960_12000K 0
-#define PMU1_XTALTAB0_960_13000K 1
-#define PMU1_XTALTAB0_960_14400K 2
-#define PMU1_XTALTAB0_960_15360K 3
-#define PMU1_XTALTAB0_960_16200K 4
-#define PMU1_XTALTAB0_960_16800K 5
-#define PMU1_XTALTAB0_960_19200K 6
-#define PMU1_XTALTAB0_960_19800K 7
-#define PMU1_XTALTAB0_960_20000K 8
-#define PMU1_XTALTAB0_960_25000K 9
-#define PMU1_XTALTAB0_960_26000K 10
-#define PMU1_XTALTAB0_960_30000K 11
-#define PMU1_XTALTAB0_960_37400K 12
-#define PMU1_XTALTAB0_960_38400K 13
-#define PMU1_XTALTAB0_960_40000K 14
-#define PMU1_XTALTAB0_960_48000K 15
-
-/* select xtal table for each chip */
-static const pmu1_xtaltab0_t *si_pmu1_xtaltab0(si_t *sih)
-{
-#ifdef BCMDBG
- char chn[8];
-#endif
- switch (sih->chip) {
- case BCM4329_CHIP_ID:
- return pmu1_xtaltab0_880_4329;
- case BCM4319_CHIP_ID:
- return pmu1_xtaltab0_1440;
- case BCM4336_CHIP_ID:
- return pmu1_xtaltab0_960;
- case BCM4330_CHIP_ID:
- if (CST4330_CHIPMODE_SDIOD(sih->chipst))
- return pmu1_xtaltab0_960;
- else
- return pmu1_xtaltab0_1440;
- default:
- PMU_MSG(("si_pmu1_xtaltab0: Unknown chipid %s\n",
- bcm_chipname(sih->chip, chn, 8)));
- break;
- }
- ASSERT(0);
- return NULL;
-}
-
-/* select default xtal frequency for each chip */
-static const pmu1_xtaltab0_t *si_pmu1_xtaldef0(si_t *sih)
-{
-#ifdef BCMDBG
- char chn[8];
-#endif
-
- switch (sih->chip) {
- case BCM4329_CHIP_ID:
- /* Default to 38400Khz */
- return &pmu1_xtaltab0_880_4329[PMU1_XTALTAB0_880_38400K];
- case BCM4319_CHIP_ID:
- /* Default to 30000Khz */
- return &pmu1_xtaltab0_1440[PMU1_XTALTAB0_1440_30000K];
- case BCM4336_CHIP_ID:
- /* Default to 26000Khz */
- return &pmu1_xtaltab0_960[PMU1_XTALTAB0_960_26000K];
- case BCM4330_CHIP_ID:
- /* Default to 37400Khz */
- if (CST4330_CHIPMODE_SDIOD(sih->chipst))
- return &pmu1_xtaltab0_960[PMU1_XTALTAB0_960_37400K];
- else
- return &pmu1_xtaltab0_1440[PMU1_XTALTAB0_1440_37400K];
- default:
- PMU_MSG(("si_pmu1_xtaldef0: Unknown chipid %s\n",
- bcm_chipname(sih->chip, chn, 8)));
- break;
- }
- ASSERT(0);
- return NULL;
-}
-
-/* query alp/xtal clock frequency */
-static u32
-si_pmu1_alpclk0(si_t *sih, chipcregs_t *cc)
-{
- const pmu1_xtaltab0_t *xt;
- u32 xf;
-
- /* Find the frequency in the table */
- xf = (R_REG(&cc->pmucontrol) & PCTL_XTALFREQ_MASK) >>
- PCTL_XTALFREQ_SHIFT;
- for (xt = si_pmu1_xtaltab0(sih); xt != NULL && xt->fref != 0; xt++)
- if (xt->xf == xf)
- break;
- /* Could not find it so assign a default value */
- if (xt == NULL || xt->fref == 0)
- xt = si_pmu1_xtaldef0(sih);
- ASSERT(xt != NULL && xt->fref != 0);
-
- return xt->fref * 1000;
-}
-
-/* query alp/xtal clock frequency */
-u32 si_pmu_alp_clock(si_t *sih)
-{
- chipcregs_t *cc;
- uint origidx;
- u32 clock = ALP_CLOCK;
-#ifdef BCMDBG
- char chn[8];
-#endif
- /* bail out with default */
- if (!PMUCTL_ENAB(sih))
- return clock;
-
- ASSERT(sih->cccaps & CC_CAP_PMU);
-
- /* Remember original core before switch to chipc */
- origidx = si_coreidx(sih);
- cc = si_setcoreidx(sih, SI_CC_IDX);
- ASSERT(cc != NULL);
-
- switch (sih->chip) {
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- case BCM43421_CHIP_ID:
- case BCM43235_CHIP_ID:
- case BCM43236_CHIP_ID:
- case BCM43238_CHIP_ID:
- case BCM4331_CHIP_ID:
- case BCM6362_CHIP_ID:
- case BCM4716_CHIP_ID:
- case BCM4748_CHIP_ID:
- case BCM47162_CHIP_ID:
- case BCM4313_CHIP_ID:
- case BCM5357_CHIP_ID:
- /* always 20Mhz */
- clock = 20000 * 1000;
- break;
- case BCM4329_CHIP_ID:
- case BCM4319_CHIP_ID:
- case BCM4336_CHIP_ID:
- case BCM4330_CHIP_ID:
-
- clock = si_pmu1_alpclk0(sih, cc);
- break;
- case BCM5356_CHIP_ID:
- /* always 25Mhz */
- clock = 25000 * 1000;
- break;
- default:
- PMU_MSG(("No ALP clock specified "
- "for chip %s rev %d pmurev %d, using default %d Hz\n",
- bcm_chipname(sih->chip, chn, 8), sih->chiprev,
- sih->pmurev, clock));
- break;
- }
-
- /* Return to original core */
- si_setcoreidx(sih, origidx);
- return clock;
-}
-
-/* Measure ILP clock frequency */
-#define ILP_CALC_DUR 10 /* ms, make sure 1000 can be divided by it. */
-
-static u32 ilpcycles_per_sec;
-
-u32 si_pmu_ilp_clock(si_t *sih)
-{
- if (ISSIM_ENAB(sih))
- return ILP_CLOCK;
-
- if (ilpcycles_per_sec == 0) {
- u32 start, end, delta;
- u32 origidx = si_coreidx(sih);
- chipcregs_t *cc = si_setcoreidx(sih, SI_CC_IDX);
- ASSERT(cc != NULL);
- start = R_REG(&cc->pmutimer);
- mdelay(ILP_CALC_DUR);
- end = R_REG(&cc->pmutimer);
- delta = end - start;
- ilpcycles_per_sec = delta * (1000 / ILP_CALC_DUR);
- si_setcoreidx(sih, origidx);
- }
-
- return ilpcycles_per_sec;
-}
-
-/* SDIO Pad drive strength to select value mappings */
-typedef struct {
- u8 strength; /* Pad Drive Strength in mA */
- u8 sel; /* Chip-specific select value */
-} sdiod_drive_str_t;
-
-/* SDIO Drive Strength to sel value table for PMU Rev 1 */
-static const sdiod_drive_str_t sdiod_drive_strength_tab1[] = {
- {
- 4, 0x2}, {
- 2, 0x3}, {
- 1, 0x0}, {
- 0, 0x0}
- };
-
-/* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
-static const sdiod_drive_str_t sdiod_drive_strength_tab2[] = {
- {
- 12, 0x7}, {
- 10, 0x6}, {
- 8, 0x5}, {
- 6, 0x4}, {
- 4, 0x2}, {
- 2, 0x1}, {
- 0, 0x0}
- };
-
-/* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
-static const sdiod_drive_str_t sdiod_drive_strength_tab3[] = {
- {
- 32, 0x7}, {
- 26, 0x6}, {
- 22, 0x5}, {
- 16, 0x4}, {
- 12, 0x3}, {
- 8, 0x2}, {
- 4, 0x1}, {
- 0, 0x0}
- };
-
-#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
-
-void
-si_sdiod_drive_strength_init(si_t *sih, u32 drivestrength) {
- chipcregs_t *cc;
- uint origidx, intr_val = 0;
- sdiod_drive_str_t *str_tab = NULL;
- u32 str_mask = 0;
- u32 str_shift = 0;
-#ifdef BCMDBG
- char chn[8];
-#endif
-
- if (!(sih->cccaps & CC_CAP_PMU)) {
- return;
- }
-
- /* Remember original core before switch to chipc */
- cc = (chipcregs_t *) si_switch_core(sih, CC_CORE_ID, &origidx,
- &intr_val);
-
- switch (SDIOD_DRVSTR_KEY(sih->chip, sih->pmurev)) {
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 1):
- str_tab = (sdiod_drive_str_t *)&sdiod_drive_strength_tab1;
- str_mask = 0x30000000;
- str_shift = 28;
- break;
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 2):
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 3):
- str_tab = (sdiod_drive_str_t *)&sdiod_drive_strength_tab2;
- str_mask = 0x00003800;
- str_shift = 11;
- break;
- case SDIOD_DRVSTR_KEY(BCM4336_CHIP_ID, 8):
- str_tab = (sdiod_drive_str_t *) &sdiod_drive_strength_tab3;
- str_mask = 0x00003800;
- str_shift = 11;
- break;
-
- default:
- PMU_MSG(("No SDIO Drive strength init done for chip %s rev %d pmurev %d\n", bcm_chipname(sih->chip, chn, 8), sih->chiprev, sih->pmurev));
-
- break;
- }
-
- if (str_tab != NULL) {
- u32 drivestrength_sel = 0;
- u32 cc_data_temp;
- int i;
-
- for (i = 0; str_tab[i].strength != 0; i++) {
- if (drivestrength >= str_tab[i].strength) {
- drivestrength_sel = str_tab[i].sel;
- break;
- }
- }
-
- W_REG(&cc->chipcontrol_addr, 1);
- cc_data_temp = R_REG(&cc->chipcontrol_data);
- cc_data_temp &= ~str_mask;
- drivestrength_sel <<= str_shift;
- cc_data_temp |= drivestrength_sel;
- W_REG(&cc->chipcontrol_data, cc_data_temp);
-
- PMU_MSG(("SDIO: %dmA drive strength selected, set to 0x%08x\n",
- drivestrength, cc_data_temp));
- }
-
- /* Return to original core */
- si_restore_core(sih, origidx, intr_val);
-}
-
-/* Return up time in ILP cycles for the given resource. */
-static uint
-si_pmu_res_uptime(si_t *sih, chipcregs_t *cc, u8 rsrc) {
- u32 deps;
- uint up, i, dup, dmax;
- u32 min_mask = 0, max_mask = 0;
-
- /* uptime of resource 'rsrc' */
- W_REG(&cc->res_table_sel, rsrc);
- up = (R_REG(&cc->res_updn_timer) >> 8) & 0xff;
-
- /* direct dependancies of resource 'rsrc' */
- deps = si_pmu_res_deps(sih, cc, PMURES_BIT(rsrc), false);
- for (i = 0; i <= PMURES_MAX_RESNUM; i++) {
- if (!(deps & PMURES_BIT(i)))
- continue;
- deps &= ~si_pmu_res_deps(sih, cc, PMURES_BIT(i), true);
- }
- si_pmu_res_masks(sih, &min_mask, &max_mask);
- deps &= ~min_mask;
-
- /* max uptime of direct dependancies */
- dmax = 0;
- for (i = 0; i <= PMURES_MAX_RESNUM; i++) {
- if (!(deps & PMURES_BIT(i)))
- continue;
- dup = si_pmu_res_uptime(sih, cc, (u8) i);
- if (dmax < dup)
- dmax = dup;
- }
-
- PMU_MSG(("si_pmu_res_uptime: rsrc %u uptime %u(deps 0x%08x uptime %u)\n", rsrc, up, deps, dmax));
-
- return up + dmax + PMURES_UP_TRANSITION;
-}
-
-/* Return dependancies (direct or all/indirect) for the given resources */
-static u32
-si_pmu_res_deps(si_t *sih, chipcregs_t *cc, u32 rsrcs,
- bool all)
-{
- u32 deps = 0;
- u32 i;
-
- for (i = 0; i <= PMURES_MAX_RESNUM; i++) {
- if (!(rsrcs & PMURES_BIT(i)))
- continue;
- W_REG(&cc->res_table_sel, i);
- deps |= R_REG(&cc->res_dep_mask);
- }
-
- return !all ? deps : (deps
- ? (deps |
- si_pmu_res_deps(sih, cc, deps,
- true)) : 0);
-}
-
-/* Determine min/max rsrc masks. Value 0 leaves hardware at default. */
-static void si_pmu_res_masks(si_t *sih, u32 * pmin, u32 * pmax)
-{
- u32 min_mask = 0, max_mask = 0;
- uint rsrcs;
- char *val;
-
- /* # resources */
- rsrcs = (sih->pmucaps & PCAP_RC_MASK) >> PCAP_RC_SHIFT;
-
- /* determine min/max rsrc masks */
- switch (sih->chip) {
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- case BCM43421_CHIP_ID:
- case BCM43235_CHIP_ID:
- case BCM43236_CHIP_ID:
- case BCM43238_CHIP_ID:
- case BCM4331_CHIP_ID:
- case BCM6362_CHIP_ID:
- /* ??? */
- break;
-
- case BCM4329_CHIP_ID:
- /* 4329 spedific issue. Needs to come back this issue later */
- /* Down to save the power. */
- min_mask =
- PMURES_BIT(RES4329_CBUCK_LPOM) |
- PMURES_BIT(RES4329_CLDO_PU);
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0x3ff63e;
- break;
- case BCM4319_CHIP_ID:
- /* We only need a few resources to be kept on all the time */
- min_mask = PMURES_BIT(RES4319_CBUCK_LPOM) |
- PMURES_BIT(RES4319_CLDO_PU);
-
- /* Allow everything else to be turned on upon requests */
- max_mask = ~(~0 << rsrcs);
- break;
- case BCM4336_CHIP_ID:
- /* Down to save the power. */
- min_mask =
- PMURES_BIT(RES4336_CBUCK_LPOM) | PMURES_BIT(RES4336_CLDO_PU)
- | PMURES_BIT(RES4336_LDO3P3_PU) | PMURES_BIT(RES4336_OTP_PU)
- | PMURES_BIT(RES4336_DIS_INT_RESET_PD);
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0x1ffffff;
- break;
-
- case BCM4330_CHIP_ID:
- /* Down to save the power. */
- min_mask =
- PMURES_BIT(RES4330_CBUCK_LPOM) | PMURES_BIT(RES4330_CLDO_PU)
- | PMURES_BIT(RES4330_DIS_INT_RESET_PD) |
- PMURES_BIT(RES4330_LDO3P3_PU) | PMURES_BIT(RES4330_OTP_PU);
- /* Allow (but don't require) PLL to turn on */
- max_mask = 0xfffffff;
- break;
-
- case BCM4313_CHIP_ID:
- min_mask = PMURES_BIT(RES4313_BB_PU_RSRC) |
- PMURES_BIT(RES4313_XTAL_PU_RSRC) |
- PMURES_BIT(RES4313_ALP_AVAIL_RSRC) |
- PMURES_BIT(RES4313_BB_PLL_PWRSW_RSRC);
- max_mask = 0xffff;
- break;
- default:
- break;
- }
-
- /* Apply nvram override to min mask */
- val = getvar(NULL, "rmin");
- if (val != NULL) {
- PMU_MSG(("Applying rmin=%s to min_mask\n", val));
- min_mask = (u32) simple_strtoul(val, NULL, 0);
- }
- /* Apply nvram override to max mask */
- val = getvar(NULL, "rmax");
- if (val != NULL) {
- PMU_MSG(("Applying rmax=%s to max_mask\n", val));
- max_mask = (u32) simple_strtoul(val, NULL, 0);
- }
-
- *pmin = min_mask;
- *pmax = max_mask;
-}
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_pmu.h b/drivers/staging/brcm80211/brcmfmac/dhd_pmu.h
deleted file mode 100644
index 56a7311..0000000
--- a/drivers/staging/brcm80211/brcmfmac/dhd_pmu.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _hndpmu_h_
-#define _hndpmu_h_
-
-#define SET_LDO_VOLTAGE_LDO1 1
-#define SET_LDO_VOLTAGE_LDO2 2
-#define SET_LDO_VOLTAGE_LDO3 3
-#define SET_LDO_VOLTAGE_PAREF 4
-#define SET_LDO_VOLTAGE_CLDO_PWM 5
-#define SET_LDO_VOLTAGE_CLDO_BURST 6
-#define SET_LDO_VOLTAGE_CBUCK_PWM 7
-#define SET_LDO_VOLTAGE_CBUCK_BURST 8
-#define SET_LDO_VOLTAGE_LNLDO1 9
-#define SET_LDO_VOLTAGE_LNLDO2_SEL 10
-
-extern void si_pmu_init(si_t *sih);
-extern void si_pmu_chip_init(si_t *sih);
-extern void si_pmu_pll_init(si_t *sih, u32 xtalfreq);
-extern void si_pmu_res_init(si_t *sih);
-extern void si_pmu_swreg_init(si_t *sih);
-extern u32 si_pmu_alp_clock(si_t *sih);
-extern void si_pmu_set_ldo_voltage(si_t *sih, u8 ldo, u8 voltage);
-extern u16 si_pmu_fast_pwrup_delay(si_t *sih);
-extern void si_pmu_pllupd(si_t *sih);
-extern void si_pmu_spuravoid(si_t *sih, u8 spuravoid);
-extern bool si_pmu_is_otp_powered(si_t *sih);
-extern u32 si_pmu_measure_alpclk(si_t *sih);
-extern u32 si_pmu_chipcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern u32 si_pmu_regcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern u32 si_pmu_pllcontrol(si_t *sih, uint reg, u32 mask, u32 val);
-extern void si_pmu_sprom_enable(si_t *sih, bool enable);
-extern void si_pmu_otp_power(si_t *sih, bool on);
-
-extern void si_sdiod_drive_strength_init(si_t *sih, u32 drivestrength);
-extern u32 si_pmu_ilp_clock(si_t *sih);
-
-#endif /* _hndpmu_h_ */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index a634cc0..3a70bf2 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -28,8 +28,6 @@
#include <bcmutils.h>
#include <bcmdevs.h>
-#include <siutils.h>
-#include <dhd_pmu.h>
#include <hndsoc.h>
#ifdef DHD_DEBUG
#include <hndrte_armtrap.h>
@@ -52,7 +50,6 @@
#include <dhd_dbg.h>
#include <dhdioctl.h>
#include <sdiovar.h>
-#include <siutils_priv.h>
#include <bcmchip.h>
#ifndef DHDSDIO_MEM_DUMP_FNAME
diff --git a/drivers/staging/brcm80211/brcmfmac/sbutils.c b/drivers/staging/brcm80211/brcmfmac/sbutils.c
deleted file mode 100644
index 64496b8..0000000
--- a/drivers/staging/brcm80211/brcmfmac/sbutils.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../util/sbutils.c"
diff --git a/drivers/staging/brcm80211/brcmfmac/siutils.c b/drivers/staging/brcm80211/brcmfmac/siutils.c
deleted file mode 100644
index f428e99..0000000
--- a/drivers/staging/brcm80211/brcmfmac/siutils.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../util/siutils.c"
diff --git a/drivers/staging/brcm80211/util/bcmutils.c b/drivers/staging/brcm80211/util/bcmutils.c
index 28ab0ee..7337a75 100644
--- a/drivers/staging/brcm80211/util/bcmutils.c
+++ b/drivers/staging/brcm80211/util/bcmutils.c
@@ -24,7 +24,6 @@
#include <bcmdefs.h>
#include <stdarg.h>
#include <bcmutils.h>
-#include <siutils.h>
#include <bcmnvram.h>
#include <bcmdevs.h>
#include <proto/802.11.h>
diff --git a/drivers/staging/brcm80211/util/sbutils.c b/drivers/staging/brcm80211/util/sbutils.c
deleted file mode 100644
index 9384055..0000000
--- a/drivers/staging/brcm80211/util/sbutils.c
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/types.h>
-#include <bcmdefs.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
-#include <bcmutils.h>
-#include <siutils.h>
-#include <bcmdevs.h>
-#include <hndsoc.h>
-#include <sbchipc.h>
-#include <pci_core.h>
-#include <pcicfg.h>
-#include <sbpcmcia.h>
-#include "siutils_priv.h"
-
-/* local prototypes */
-static uint _sb_coreidx(si_info_t *sii, u32 sba);
-static uint _sb_scan(si_info_t *sii, u32 sba, void *regs, uint bus,
- u32 sbba, uint ncores);
-static u32 _sb_coresba(si_info_t *sii);
-static void *_sb_setcoreidx(si_info_t *sii, uint coreidx);
-
-#define SET_SBREG(sii, r, mask, val) \
- W_SBREG((sii), (r), ((R_SBREG((sii), (r)) & ~(mask)) | (val)))
-#define REGS2SB(va) (sbconfig_t *) ((s8 *)(va) + SBCONFIGOFF)
-
-/* sonicsrev */
-#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
-#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
-
-#define R_SBREG(sii, sbr) sb_read_sbreg((sii), (sbr))
-#define W_SBREG(sii, sbr, v) sb_write_sbreg((sii), (sbr), (v))
-#define AND_SBREG(sii, sbr, v) \
- W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) & (v)))
-#define OR_SBREG(sii, sbr, v) \
- W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) | (v)))
-
-static u32 sb_read_sbreg(si_info_t *sii, volatile u32 *sbr)
-{
- return R_REG(sbr);
-}
-
-static void sb_write_sbreg(si_info_t *sii, volatile u32 *sbr, u32 v)
-{
- W_REG(sbr, v);
-}
-
-uint sb_coreid(si_t *sih)
-{
- si_info_t *sii;
- sbconfig_t *sb;
-
- sii = SI_INFO(sih);
- sb = REGS2SB(sii->curmap);
-
- return (R_SBREG(sii, &sb->sbidhigh) & SBIDH_CC_MASK) >>
- SBIDH_CC_SHIFT;
-}
-
-/* return core index of the core with address 'sba' */
-static uint _sb_coreidx(si_info_t *sii, u32 sba)
-{
- uint i;
-
- for (i = 0; i < sii->numcores; i++)
- if (sba == sii->coresba[i])
- return i;
- return BADIDX;
-}
-
-/* return core address of the current core */
-static u32 _sb_coresba(si_info_t *sii)
-{
- u32 sbaddr = 0;
-
- switch (sii->pub.bustype) {
- case SPI_BUS:
- case SDIO_BUS:
- sbaddr = (u32)(unsigned long)sii->curmap;
- break;
- default:
- break;
- }
-
- return sbaddr;
-}
-
-uint sb_corerev(si_t *sih)
-{
- si_info_t *sii;
- sbconfig_t *sb;
- uint sbidh;
-
- sii = SI_INFO(sih);
- sb = REGS2SB(sii->curmap);
- sbidh = R_SBREG(sii, &sb->sbidhigh);
-
- return SBCOREREV(sbidh);
-}
-
-bool sb_iscoreup(si_t *sih)
-{
- si_info_t *sii;
- sbconfig_t *sb;
-
- sii = SI_INFO(sih);
- sb = REGS2SB(sii->curmap);
-
- return (R_SBREG(sii, &sb->sbtmstatelow) &
- (SBTML_RESET | SBTML_REJ_MASK |
- (SICF_CLOCK_EN << SBTML_SICF_SHIFT))) ==
- (SICF_CLOCK_EN << SBTML_SICF_SHIFT);
-}
-
-/*
- * Switch to 'coreidx', issue a single arbitrary 32bit
- * register mask&set operation,
- * switch back to the original core, and return the new value.
- *
- * When using the silicon backplane, no fidleing with interrupts
- * or core switches are needed.
- *
- * Also, when using pci/pcie, we can optimize away the core switching
- * for pci registers
- * and (on newer pci cores) chipcommon registers.
- */
-uint sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
-{
- uint origidx = 0;
- u32 *r = NULL;
- uint w;
- uint intr_val = 0;
- bool fast = false;
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- if (coreidx >= SI_MAXCORES)
- return 0;
-
- if (!fast) {
- INTR_OFF(sii, intr_val);
-
- /* save current core index */
- origidx = si_coreidx(&sii->pub);
-
- /* switch core */
- r = (u32 *) ((unsigned char *) sb_setcoreidx(&sii->pub, coreidx) +
- regoff);
- }
-
- /* mask and set */
- if (mask || val) {
- if (regoff >= SBCONFIGOFF) {
- w = (R_SBREG(sii, r) & ~mask) | val;
- W_SBREG(sii, r, w);
- } else {
- w = (R_REG(r) & ~mask) | val;
- W_REG(r, w);
- }
- }
-
- /* readback */
- if (regoff >= SBCONFIGOFF)
- w = R_SBREG(sii, r);
- else
- w = R_REG(r);
-
- if (!fast) {
- /* restore core index */
- if (origidx != coreidx)
- sb_setcoreidx(&sii->pub, origidx);
-
- INTR_RESTORE(sii, intr_val);
- }
-
- return w;
-}
-
-/* Scan the enumeration space to find all cores starting from the given
- * bus 'sbba'. Append coreid and other info to the lists in 'si'. 'sba'
- * is the default core address at chip POR time and 'regs' is the virtual
- * address that the default core is mapped at. 'ncores' is the number of
- * cores expected on bus 'sbba'. It returns the total number of cores
- * starting from bus 'sbba', inclusive.
- */
-#define SB_MAXBUSES 2
-static uint _sb_scan(si_info_t *sii, u32 sba, void *regs, uint bus, u32 sbba,
- uint numcores)
-{
- uint next;
- uint ncc = 0;
- uint i;
-
- if (bus >= SB_MAXBUSES) {
- SI_ERROR(("_sb_scan: bus 0x%08x at level %d is too deep to "
- "scan\n", sbba, bus));
- return 0;
- }
- SI_MSG(("_sb_scan: scan bus 0x%08x assume %u cores\n",
- sbba, numcores));
-
- /* Scan all cores on the bus starting from core 0.
- * Core addresses must be contiguous on each bus.
- */
- for (i = 0, next = sii->numcores;
- i < numcores && next < SB_BUS_MAXCORES; i++, next++) {
- sii->coresba[next] = sbba + (i * SI_CORE_SIZE);
-
- /* change core to 'next' and read its coreid */
- sii->curmap = _sb_setcoreidx(sii, next);
- sii->curidx = next;
-
- sii->coreid[next] = sb_coreid(&sii->pub);
-
- /* core specific processing... */
- /* chipc provides # cores */
- if (sii->coreid[next] == CC_CORE_ID) {
- chipcregs_t *cc = (chipcregs_t *) sii->curmap;
- u32 ccrev = sb_corerev(&sii->pub);
-
- /* determine numcores - this is the
- total # cores in the chip */
- if (((ccrev == 4) || (ccrev >= 6)))
- numcores =
- (R_REG(&cc->chipid) & CID_CC_MASK)
- >> CID_CC_SHIFT;
- else {
- /* Older chips */
- SI_ERROR(("sb_chip2numcores: unsupported chip "
- "0x%x\n", sii->pub.chip));
- numcores = 1;
- }
-
- SI_VMSG(("_sb_scan: %u cores in the chip %s\n",
- numcores, sii->pub.issim ? "QT" : ""));
- }
- /* scan bridged SB(s) and add results to the end of the list */
- else if (sii->coreid[next] == OCP_CORE_ID) {
- sbconfig_t *sb = REGS2SB(sii->curmap);
- u32 nsbba = R_SBREG(sii, &sb->sbadmatch1);
- uint nsbcc;
-
- sii->numcores = next + 1;
-
- if ((nsbba & 0xfff00000) != SI_ENUM_BASE)
- continue;
- nsbba &= 0xfffff000;
- if (_sb_coreidx(sii, nsbba) != BADIDX)
- continue;
-
- nsbcc =
- (R_SBREG(sii, &sb->sbtmstatehigh) & 0x000f0000) >>
- 16;
- nsbcc = _sb_scan(sii, sba, regs, bus + 1, nsbba, nsbcc);
- if (sbba == SI_ENUM_BASE)
- numcores -= nsbcc;
- ncc += nsbcc;
- }
- }
-
- SI_MSG(("_sb_scan: found %u cores on bus 0x%08x\n", i, sbba));
-
- sii->numcores = i + ncc;
- return sii->numcores;
-}
-
-/* scan the sb enumerated space to identify all cores */
-void sb_scan(si_t *sih, void *regs, uint devid)
-{
- si_info_t *sii;
- u32 origsba;
- sbconfig_t *sb;
-
- sii = SI_INFO(sih);
- sb = REGS2SB(sii->curmap);
-
- sii->pub.socirev =
- (R_SBREG(sii, &sb->sbidlow) & SBIDL_RV_MASK) >> SBIDL_RV_SHIFT;
-
- /* Save the current core info and validate it later till we know
- * for sure what is good and what is bad.
- */
- origsba = _sb_coresba(sii);
-
- /* scan all SB(s) starting from SI_ENUM_BASE */
- sii->numcores = _sb_scan(sii, origsba, regs, 0, SI_ENUM_BASE, 1);
-}
-
-/*
- * This function changes logical "focus" to the indicated core;
- * must be called with interrupts off.
- * Moreover, callers should keep interrupts off during switching out of
- * and back to d11 core
- */
-void *sb_setcoreidx(si_t *sih, uint coreidx)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- if (coreidx >= sii->numcores)
- return NULL;
-
- /*
- * If the user has provided an interrupt mask enabled function,
- * then interrupts should be disabled before switching the core.
- */
- sii->curmap = _sb_setcoreidx(sii, coreidx);
- sii->curidx = coreidx;
-
- return sii->curmap;
-}
-
-/* This function changes the logical "focus" to the indicated core.
- * Return the current core's virtual address.
- */
-static void *_sb_setcoreidx(si_info_t *sii, uint coreidx)
-{
- u32 sbaddr = sii->coresba[coreidx];
- void *regs;
-
- switch (sii->pub.bustype) {
-#ifdef BCMSDIO
- case SPI_BUS:
- case SDIO_BUS:
- /* map new one */
- if (!sii->regs[coreidx]) {
- sii->regs[coreidx] = (void *)sbaddr;
- }
- regs = sii->regs[coreidx];
- break;
-#endif /* BCMSDIO */
- default:
- regs = NULL;
- break;
- }
-
- return regs;
-}
-
-void sb_core_disable(si_t *sih, u32 bits)
-{
- si_info_t *sii;
- volatile u32 dummy;
- sbconfig_t *sb;
-
- sii = SI_INFO(sih);
-
- sb = REGS2SB(sii->curmap);
-
- /* if core is already in reset, just return */
- if (R_SBREG(sii, &sb->sbtmstatelow) & SBTML_RESET)
- return;
-
- /* if clocks are not enabled, put into reset and return */
- if ((R_SBREG(sii, &sb->sbtmstatelow) &
- (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) == 0)
- goto disable;
-
- /* set target reject and spin until busy is clear
- (preserve core-specific bits) */
- OR_SBREG(sii, &sb->sbtmstatelow, SBTML_REJ);
- dummy = R_SBREG(sii, &sb->sbtmstatelow);
- udelay(1);
- SPINWAIT((R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
- if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY)
- SI_ERROR(("%s: target state still busy\n", __func__));
-
- if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT) {
- OR_SBREG(sii, &sb->sbimstate, SBIM_RJ);
- dummy = R_SBREG(sii, &sb->sbimstate);
- udelay(1);
- SPINWAIT((R_SBREG(sii, &sb->sbimstate) & SBIM_BY), 100000);
- }
-
- /* set reset and reject while enabling the clocks */
- W_SBREG(sii, &sb->sbtmstatelow,
- (((bits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) |
- SBTML_REJ | SBTML_RESET));
- dummy = R_SBREG(sii, &sb->sbtmstatelow);
- udelay(10);
-
- /* don't forget to clear the initiator reject bit */
- if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT)
- AND_SBREG(sii, &sb->sbimstate, ~SBIM_RJ);
-
-disable:
- /* leave reset and reject asserted */
- W_SBREG(sii, &sb->sbtmstatelow,
- ((bits << SBTML_SICF_SHIFT) | SBTML_REJ | SBTML_RESET));
- udelay(1);
-}
-
-/* reset and re-enable a core
- * inputs:
- * bits - core specific bits that are set during and after reset sequence
- * resetbits - core specific bits that are set only during reset sequence
- */
-void sb_core_reset(si_t *sih, u32 bits, u32 resetbits)
-{
- si_info_t *sii;
- sbconfig_t *sb;
- volatile u32 dummy;
-
- sii = SI_INFO(sih);
- sb = REGS2SB(sii->curmap);
-
- /*
- * Must do the disable sequence first to work for
- * arbitrary current core state.
- */
- sb_core_disable(sih, (bits | resetbits));
-
- /*
- * Now do the initialization sequence.
- */
-
- /* set reset while enabling the clock and
- forcing them on throughout the core */
- W_SBREG(sii, &sb->sbtmstatelow,
- (((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) <<
- SBTML_SICF_SHIFT) | SBTML_RESET));
- dummy = R_SBREG(sii, &sb->sbtmstatelow);
- udelay(1);
-
- if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_SERR)
- W_SBREG(sii, &sb->sbtmstatehigh, 0);
-
- dummy = R_SBREG(sii, &sb->sbimstate);
- if (dummy & (SBIM_IBE | SBIM_TO))
- AND_SBREG(sii, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
-
- /* clear reset and allow it to propagate throughout the core */
- W_SBREG(sii, &sb->sbtmstatelow,
- ((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) <<
- SBTML_SICF_SHIFT));
- dummy = R_SBREG(sii, &sb->sbtmstatelow);
- udelay(1);
-
- /* leave clock enabled */
- W_SBREG(sii, &sb->sbtmstatelow,
- ((bits | SICF_CLOCK_EN) << SBTML_SICF_SHIFT));
- dummy = R_SBREG(sii, &sb->sbtmstatelow);
- udelay(1);
-}
diff --git a/drivers/staging/brcm80211/util/siutils.c b/drivers/staging/brcm80211/util/siutils.c
deleted file mode 100644
index 7f6061d..0000000
--- a/drivers/staging/brcm80211/util/siutils.c
+++ /dev/null
@@ -1,1490 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <bcmdefs.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <bcmutils.h>
-#include <siutils.h>
-#include <bcmdevs.h>
-#include <hndsoc.h>
-#include <sbchipc.h>
-#include <pci_core.h>
-#include <pcie_core.h>
-#include <nicpci.h>
-#include <bcmnvram.h>
-#include <bcmsrom.h>
-#include <pcicfg.h>
-#include <sbsocram.h>
-#include <bcmsdh.h>
-#include <sdio.h>
-#include <sbsdio.h>
-#include <sbhnddma.h>
-#include <sbsdpcmdev.h>
-#include <bcmsdpcm.h>
-#include <dhd_pmu.h>
-
-/* this file now contains only definitions for sb functions, only necessary
-*for devices using Sonics backplanes (bcm4329)
-*/
-#include "siutils_priv.h"
-
-/* local prototypes */
-static si_info_t *si_doattach(si_info_t *sii, uint devid, void *regs,
- uint bustype, void *sdh, char **vars,
- uint *varsz);
-static bool si_buscore_prep(si_info_t *sii, uint bustype, uint devid,
- void *sdh);
-static bool si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype,
- u32 savewin, uint *origidx, void *regs);
-static void si_nvram_process(si_info_t *sii, char *pvars);
-
-/* dev path concatenation util */
-static char *si_devpathvar(si_t *sih, char *var, int len, const char *name);
-static bool _si_clkctl_cc(si_info_t *sii, uint mode);
-static bool si_ispcie(si_info_t *sii);
-static uint socram_banksize(si_info_t *sii, sbsocramregs_t *r,
- u8 idx, u8 mtype);
-
-/* global variable to indicate reservation/release of gpio's */
-static u32 si_gpioreservation;
-
-/*
- * Allocate a si handle.
- * devid - pci device id (used to determine chip#)
- * osh - opaque OS handle
- * regs - virtual address of initial core registers
- * bustype - pci/sb/sdio/etc
- * vars - pointer to a pointer area for "environment" variables
- * varsz - pointer to int to return the size of the vars
- */
-si_t *si_attach(uint devid, void *regs, uint bustype,
- void *sdh, char **vars, uint *varsz)
-{
- si_info_t *sii;
-
- /* alloc si_info_t */
- sii = kmalloc(sizeof(si_info_t), GFP_ATOMIC);
- if (sii == NULL) {
- SI_ERROR(("si_attach: malloc failed!\n"));
- return NULL;
- }
-
- if (si_doattach(sii, devid, regs, bustype, sdh, vars, varsz) ==
- NULL) {
- kfree(sii);
- return NULL;
- }
- sii->vars = vars ? *vars : NULL;
- sii->varsz = varsz ? *varsz : 0;
-
- return (si_t *) sii;
-}
-
-/* global kernel resource */
-static si_info_t ksii;
-
-static bool si_buscore_prep(si_info_t *sii, uint bustype, uint devid,
- void *sdh)
-{
-
- if (bustype == SDIO_BUS) {
- int err;
- u8 clkset;
-
- /* Try forcing SDIO core to do ALPAvail request only */
- clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
- bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
- clkset, &err);
- if (!err) {
- u8 clkval;
-
- /* If register supported, wait for ALPAvail and then force ALP */
- clkval =
- bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR, NULL);
- if ((clkval & ~SBSDIO_AVBITS) == clkset) {
- SPINWAIT(((clkval =
- bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- NULL)),
- !SBSDIO_ALPAV(clkval)),
- PMU_MAX_TRANSITION_DLY);
- if (!SBSDIO_ALPAV(clkval)) {
- SI_ERROR(("timeout on ALPAV wait, clkval 0x%02x\n", clkval));
- return false;
- }
- clkset =
- SBSDIO_FORCE_HW_CLKREQ_OFF |
- SBSDIO_FORCE_ALP;
- bcmsdh_cfg_write(sdh, SDIO_FUNC_1,
- SBSDIO_FUNC1_CHIPCLKCSR,
- clkset, &err);
- udelay(65);
- }
- }
-
- /* Also, disable the extra SDIO pull-ups */
- bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SDIOPULLUP, 0,
- NULL);
- }
-
- return true;
-}
-
-static bool si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype,
- u32 savewin, uint *origidx, void *regs)
-{
- bool pci, pcie;
- uint i;
- uint pciidx, pcieidx, pcirev, pcierev;
-
- cc = si_setcoreidx(&sii->pub, SI_CC_IDX);
-
- /* get chipcommon rev */
- sii->pub.ccrev = (int)si_corerev(&sii->pub);
-
- /* get chipcommon chipstatus */
- if (sii->pub.ccrev >= 11)
- sii->pub.chipst = R_REG(&cc->chipstatus);
-
- /* get chipcommon capabilites */
- sii->pub.cccaps = R_REG(&cc->capabilities);
- /* get chipcommon extended capabilities */
-
- /* get pmu rev and caps */
- if (sii->pub.cccaps & CC_CAP_PMU) {
- sii->pub.pmucaps = R_REG(&cc->pmucapabilities);
- sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
- }
-
- /*
- SI_MSG(("Chipc: rev %d, caps 0x%x, chipst 0x%x pmurev %d, pmucaps 0x%x\n",
- sii->pub.ccrev, sii->pub.cccaps, sii->pub.chipst, sii->pub.pmurev,
- sii->pub.pmucaps));
- */
-
- /* figure out bus/orignal core idx */
- sii->pub.buscoretype = NODEV_CORE_ID;
- sii->pub.buscorerev = NOREV;
- sii->pub.buscoreidx = BADIDX;
-
- pci = pcie = false;
- pcirev = pcierev = NOREV;
- pciidx = pcieidx = BADIDX;
-
- for (i = 0; i < sii->numcores; i++) {
- uint cid, crev;
-
- si_setcoreidx(&sii->pub, i);
- cid = si_coreid(&sii->pub);
- crev = si_corerev(&sii->pub);
-
- /* Display cores found */
- SI_VMSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n",
- i, cid, crev, sii->coresba[i], sii->regs[i]));
-
- if (bustype == PCI_BUS) {
- if (cid == PCI_CORE_ID) {
- pciidx = i;
- pcirev = crev;
- pci = true;
- } else if (cid == PCIE_CORE_ID) {
- pcieidx = i;
- pcierev = crev;
- pcie = true;
- }
- }
- else if (((bustype == SDIO_BUS) ||
- (bustype == SPI_BUS)) &&
- ((cid == PCMCIA_CORE_ID) || (cid == SDIOD_CORE_ID))) {
- sii->pub.buscorerev = crev;
- sii->pub.buscoretype = cid;
- sii->pub.buscoreidx = i;
- }
-
- /* find the core idx before entering this func. */
- if ((savewin && (savewin == sii->coresba[i])) ||
- (regs == sii->regs[i]))
- *origidx = i;
- }
-
- SI_MSG(("Buscore id/type/rev %d/0x%x/%d\n", sii->pub.buscoreidx,
- sii->pub.buscoretype, sii->pub.buscorerev));
-
- /* Make sure any on-chip ARM is off (in case strapping is wrong),
- * or downloaded code was
- * already running.
- */
- if ((bustype == SDIO_BUS) || (bustype == SPI_BUS)) {
- if (si_setcore(&sii->pub, ARM7S_CORE_ID, 0) ||
- si_setcore(&sii->pub, ARMCM3_CORE_ID, 0))
- si_core_disable(&sii->pub, 0);
- }
- /* return to the original core */
- si_setcoreidx(&sii->pub, *origidx);
-
- return true;
-}
-
-static __used void si_nvram_process(si_info_t *sii, char *pvars)
-{
- uint w = 0;
-
- /* get boardtype and boardrev */
- switch (sii->pub.bustype) {
- case PCI_BUS:
- /* do a pci config read to get subsystem id and subvendor id */
- pci_read_config_dword(sii->pbus, PCI_CFG_SVID, &w);
- /* Let nvram variables override subsystem Vend/ID */
- sii->pub.boardvendor = (u16)si_getdevpathintvar(&sii->pub,
- "boardvendor");
- if (sii->pub.boardvendor == 0)
- sii->pub.boardvendor = w & 0xffff;
- else
- SI_ERROR(("Overriding boardvendor: 0x%x instead of 0x%x\n", sii->pub.boardvendor, w & 0xffff));
- sii->pub.boardtype = (u16)si_getdevpathintvar(&sii->pub,
- "boardtype");
- if (sii->pub.boardtype == 0)
- sii->pub.boardtype = (w >> 16) & 0xffff;
- else
- SI_ERROR(("Overriding boardtype: 0x%x instead of 0x%x\n", sii->pub.boardtype, (w >> 16) & 0xffff));
- break;
-
- case SDIO_BUS:
- sii->pub.boardvendor = getintvar(pvars, "manfid");
- sii->pub.boardtype = getintvar(pvars, "prodid");
- break;
-
- case SPI_BUS:
- sii->pub.boardvendor = PCI_VENDOR_ID_BROADCOM;
- sii->pub.boardtype = SPI_BOARD;
- break;
-
- case SI_BUS:
- case JTAG_BUS:
- sii->pub.boardvendor = PCI_VENDOR_ID_BROADCOM;
- sii->pub.boardtype = getintvar(pvars, "prodid");
- if (pvars == NULL || (sii->pub.boardtype == 0)) {
- sii->pub.boardtype = getintvar(NULL, "boardtype");
- if (sii->pub.boardtype == 0)
- sii->pub.boardtype = 0xffff;
- }
- break;
- }
-
- if (sii->pub.boardtype == 0) {
- SI_ERROR(("si_doattach: unknown board type\n"));
- }
-
- sii->pub.boardflags = getintvar(pvars, "boardflags");
-}
-
-/* this is will make Sonics calls directly, since Sonics is no longer supported in the Si abstraction */
-/* this has been customized for the bcm 4329 ONLY */
-static si_info_t *si_doattach(si_info_t *sii, uint devid,
- void *regs, uint bustype, void *pbus,
- char **vars, uint *varsz)
-{
- struct si_pub *sih = &sii->pub;
- u32 w, savewin;
- chipcregs_t *cc;
- uint origidx;
-
- memset((unsigned char *) sii, 0, sizeof(si_info_t));
-
- savewin = 0;
-
- sih->buscoreidx = BADIDX;
-
- sii->curmap = regs;
- sii->pbus = pbus;
-
- /* find Chipcommon address */
- cc = (chipcregs_t *) sii->curmap;
- sih->bustype = bustype;
-
- /* bus/core/clk setup for register access */
- if (!si_buscore_prep(sii, bustype, devid, pbus)) {
- SI_ERROR(("si_doattach: si_core_clk_prep failed %d\n",
- bustype));
- return NULL;
- }
-
- /* ChipID recognition.
- * We assume we can read chipid at offset 0 from the regs arg.
- * If we add other chiptypes (or if we need to support old sdio hosts w/o chipcommon),
- * some way of recognizing them needs to be added here.
- */
- w = R_REG(&cc->chipid);
- sih->socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
- /* Might as wll fill in chip id rev & pkg */
- sih->chip = w & CID_ID_MASK;
- sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT;
- sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT;
-
- if ((sih->chip == BCM4329_CHIP_ID) &&
- (sih->chippkg != BCM4329_289PIN_PKG_ID))
- sih->chippkg = BCM4329_182PIN_PKG_ID;
-
- sih->issim = IS_SIM(sih->chippkg);
-
- /* scan for cores */
- /* SI_MSG(("Found chip type SB (0x%08x)\n", w)); */
- sb_scan(&sii->pub, regs, devid);
-
- /* no cores found, bail out */
- if (sii->numcores == 0) {
- SI_ERROR(("si_doattach: could not find any cores\n"));
- return NULL;
- }
- /* bus/core/clk setup */
- origidx = SI_CC_IDX;
- if (!si_buscore_setup(sii, cc, bustype, savewin, &origidx, regs)) {
- SI_ERROR(("si_doattach: si_buscore_setup failed\n"));
- goto exit;
- }
-
- cc = (chipcregs_t *) si_setcore(sih, CC_CORE_ID, 0);
- W_REG(&cc->gpiopullup, 0);
- W_REG(&cc->gpiopulldown, 0);
- sb_setcoreidx(sih, origidx);
-
- return sii;
-
- exit:
- return NULL;
-}
-
-/* may be called with core in reset */
-void si_detach(si_t *sih)
-{
- si_info_t *sii;
- uint idx;
-
- struct si_pub *si_local = NULL;
- memcpy(&si_local, &sih, sizeof(si_t **));
-
- sii = SI_INFO(sih);
-
- if (sii == NULL)
- return;
-
- if (sih->bustype == SI_BUS)
- for (idx = 0; idx < SI_MAXCORES; idx++)
- if (sii->regs[idx]) {
- iounmap(sii->regs[idx]);
- sii->regs[idx] = NULL;
- }
-
-#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SI_BUS)
- if (sii != &ksii)
-#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SI_BUS) */
- kfree(sii);
-}
-
-/* register driver interrupt disabling and restoring callback functions */
-void
-si_register_intr_callback(si_t *sih, void *intrsoff_fn, void *intrsrestore_fn,
- void *intrsenabled_fn, void *intr_arg)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
- sii->intr_arg = intr_arg;
- sii->intrsoff_fn = (si_intrsoff_t) intrsoff_fn;
- sii->intrsrestore_fn = (si_intrsrestore_t) intrsrestore_fn;
- sii->intrsenabled_fn = (si_intrsenabled_t) intrsenabled_fn;
- /* save current core id. when this function called, the current core
- * must be the core which provides driver functions(il, et, wl, etc.)
- */
- sii->dev_coreid = sii->coreid[sii->curidx];
-}
-
-void si_deregister_intr_callback(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
- sii->intrsoff_fn = NULL;
-}
-
-uint si_flag(si_t *sih)
-{
- return 0;
-}
-
-void si_setint(si_t *sih, int siflag)
-{
-}
-
-uint si_coreidx(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
- return sii->curidx;
-}
-
-bool si_backplane64(si_t *sih)
-{
- return (sih->cccaps & CC_CAP_BKPLN64) != 0;
-}
-
-/* return index of coreid or BADIDX if not found */
-uint si_findcoreidx(si_t *sih, uint coreid, uint coreunit)
-{
- si_info_t *sii;
- uint found;
- uint i;
-
- sii = SI_INFO(sih);
-
- found = 0;
-
- for (i = 0; i < sii->numcores; i++)
- if (sii->coreid[i] == coreid) {
- if (found == coreunit)
- return i;
- found++;
- }
-
- return BADIDX;
-}
-
-/*
- * This function changes logical "focus" to the indicated core;
- * must be called with interrupts off.
- * Moreover, callers should keep interrupts off during switching out of and back to d11 core
- */
-void *si_setcore(si_t *sih, uint coreid, uint coreunit)
-{
- uint idx;
-
- idx = si_findcoreidx(sih, coreid, coreunit);
- if (!GOODIDX(idx))
- return NULL;
-
- return sb_setcoreidx(sih, idx);
-}
-
-/* Turn off interrupt as required by sb_setcore, before switch core */
-void *si_switch_core(si_t *sih, uint coreid, uint *origidx, uint *intr_val)
-{
- void *cc;
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- if (SI_FAST(sii)) {
- /* Overloading the origidx variable to remember the coreid,
- * this works because the core ids cannot be confused with
- * core indices.
- */
- *origidx = coreid;
- if (coreid == CC_CORE_ID)
- return (void *)CCREGS_FAST(sii);
- else if (coreid == sih->buscoretype)
- return (void *)PCIEREGS(sii);
- }
- INTR_OFF(sii, *intr_val);
- *origidx = sii->curidx;
- cc = si_setcore(sih, coreid, 0);
-
- return cc;
-}
-
-/* restore coreidx and restore interrupt */
-void si_restore_core(si_t *sih, uint coreid, uint intr_val)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
- if (SI_FAST(sii)
- && ((coreid == CC_CORE_ID) || (coreid == sih->buscoretype)))
- return;
-
- si_setcoreidx(sih, coreid);
- INTR_RESTORE(sii, intr_val);
-}
-
-u32 si_core_cflags(si_t *sih, u32 mask, u32 val)
-{
- return 0;
-}
-
-u32 si_core_sflags(si_t *sih, u32 mask, u32 val)
-{
- return 0;
-}
-
-bool si_iscoreup(si_t *sih)
-{
- return sb_iscoreup(sih);
-}
-
-void si_write_wrapperreg(si_t *sih, u32 offset, u32 val)
-{
-}
-
-uint si_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
-{
- return sb_corereg(sih, coreidx, regoff, mask, val);
-}
-
-void si_core_disable(si_t *sih, u32 bits)
-{
- sb_core_disable(sih, bits);
-}
-
-void si_core_reset(si_t *sih, u32 bits, u32 resetbits)
-{
- sb_core_reset(sih, bits, resetbits);
-}
-
-u32 si_alp_clock(si_t *sih)
-{
- if (PMUCTL_ENAB(sih))
- return si_pmu_alp_clock(sih);
-
- return ALP_CLOCK;
-}
-
-u32 si_ilp_clock(si_t *sih)
-{
- if (PMUCTL_ENAB(sih))
- return si_pmu_ilp_clock(sih);
-
- return ILP_CLOCK;
-}
-
-/* set chip watchdog reset timer to fire in 'ticks' */
-void
-si_watchdog(si_t *sih, uint ticks)
-{
- if (PMUCTL_ENAB(sih)) {
-
- if ((sih->chip == BCM4319_CHIP_ID) && (sih->chiprev == 0) &&
- (ticks != 0)) {
- si_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t,
- clk_ctl_st), ~0, 0x2);
- si_setcore(sih, USB20D_CORE_ID, 0);
- si_core_disable(sih, 1);
- si_setcore(sih, CC_CORE_ID, 0);
- }
-
- if (ticks == 1)
- ticks = 2;
- si_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, pmuwatchdog),
- ~0, ticks);
- } else {
- /* instant NMI */
- si_corereg(sih, SI_CC_IDX, offsetof(chipcregs_t, watchdog),
- ~0, ticks);
- }
-}
-
-/* return the slow clock source - LPO, XTAL, or PCI */
-static uint si_slowclk_src(si_info_t *sii)
-{
- chipcregs_t *cc;
- u32 val;
-
- if (sii->pub.ccrev < 6) {
- if (sii->pub.bustype == PCI_BUS) {
- pci_read_config_dword(sii->pbus, PCI_GPIO_OUT,
- &val);
- if (val & PCI_CFG_GPIO_SCS)
- return SCC_SS_PCI;
- }
- return SCC_SS_XTAL;
- } else if (sii->pub.ccrev < 10) {
- cc = (chipcregs_t *) si_setcoreidx(&sii->pub, sii->curidx);
- return R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
- } else /* Insta-clock */
- return SCC_SS_XTAL;
-}
-
-/*
- * return the ILP (slowclock) min or max frequency
- * precondition: we've established the chip has dynamic clk control
- */
-static uint si_slowclk_freq(si_info_t *sii, bool max_freq, chipcregs_t *cc)
-{
- u32 slowclk;
- uint div;
-
- slowclk = si_slowclk_src(sii);
- if (sii->pub.ccrev < 6) {
- if (slowclk == SCC_SS_PCI)
- return max_freq ? (PCIMAXFREQ / 64)
- : (PCIMINFREQ / 64);
- else
- return max_freq ? (XTALMAXFREQ / 32)
- : (XTALMINFREQ / 32);
- } else if (sii->pub.ccrev < 10) {
- div = 4 *
- (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >>
- SCC_CD_SHIFT) + 1);
- if (slowclk == SCC_SS_LPO)
- return max_freq ? LPOMAXFREQ : LPOMINFREQ;
- else if (slowclk == SCC_SS_XTAL)
- return max_freq ? (XTALMAXFREQ / div)
- : (XTALMINFREQ / div);
- else if (slowclk == SCC_SS_PCI)
- return max_freq ? (PCIMAXFREQ / div)
- : (PCIMINFREQ / div);
- } else {
- /* Chipc rev 10 is InstaClock */
- div = R_REG(&cc->system_clk_ctl) >> SYCC_CD_SHIFT;
- div = 4 * (div + 1);
- return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div);
- }
- return 0;
-}
-
-static void si_clkctl_setdelay(si_info_t *sii, void *chipcregs)
-{
- chipcregs_t *cc = (chipcregs_t *) chipcregs;
- uint slowmaxfreq, pll_delay, slowclk;
- uint pll_on_delay, fref_sel_delay;
-
- pll_delay = PLL_DELAY;
-
- /* If the slow clock is not sourced by the xtal then add the xtal_on_delay
- * since the xtal will also be powered down by dynamic clk control logic.
- */
-
- slowclk = si_slowclk_src(sii);
- if (slowclk != SCC_SS_XTAL)
- pll_delay += XTAL_ON_DELAY;
-
- /* Starting with 4318 it is ILP that is used for the delays */
- slowmaxfreq =
- si_slowclk_freq(sii, (sii->pub.ccrev >= 10) ? false : true, cc);
-
- pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000;
- fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
-
- W_REG(&cc->pll_on_delay, pll_on_delay);
- W_REG(&cc->fref_sel_delay, fref_sel_delay);
-}
-
-/* initialize power control delay registers */
-void si_clkctl_init(si_t *sih)
-{
- si_info_t *sii;
- uint origidx = 0;
- chipcregs_t *cc;
- bool fast;
-
- if (!CCCTL_ENAB(sih))
- return;
-
- sii = SI_INFO(sih);
- fast = SI_FAST(sii);
- if (!fast) {
- origidx = sii->curidx;
- cc = (chipcregs_t *) si_setcore(sih, CC_CORE_ID, 0);
- if (cc == NULL)
- return;
- } else {
- cc = (chipcregs_t *) CCREGS_FAST(sii);
- if (cc == NULL)
- return;
- }
-
- /* set all Instaclk chip ILP to 1 MHz */
- if (sih->ccrev >= 10)
- SET_REG(&cc->system_clk_ctl, SYCC_CD_MASK,
- (ILP_DIV_1MHZ << SYCC_CD_SHIFT));
-
- si_clkctl_setdelay(sii, (void *)cc);
-
- if (!fast)
- si_setcoreidx(sih, origidx);
-}
-
-/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-u16 si_clkctl_fast_pwrup_delay(si_t *sih)
-{
- si_info_t *sii;
- uint origidx = 0;
- chipcregs_t *cc;
- uint slowminfreq;
- u16 fpdelay;
- uint intr_val = 0;
- bool fast;
-
- sii = SI_INFO(sih);
- if (PMUCTL_ENAB(sih)) {
- INTR_OFF(sii, intr_val);
- fpdelay = si_pmu_fast_pwrup_delay(sih);
- INTR_RESTORE(sii, intr_val);
- return fpdelay;
- }
-
- if (!CCCTL_ENAB(sih))
- return 0;
-
- fast = SI_FAST(sii);
- fpdelay = 0;
- if (!fast) {
- origidx = sii->curidx;
- INTR_OFF(sii, intr_val);
- cc = (chipcregs_t *) si_setcore(sih, CC_CORE_ID, 0);
- if (cc == NULL)
- goto done;
- } else {
- cc = (chipcregs_t *) CCREGS_FAST(sii);
- if (cc == NULL)
- goto done;
- }
-
- slowminfreq = si_slowclk_freq(sii, false, cc);
- fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) +
- (slowminfreq - 1)) / slowminfreq;
-
- done:
- if (!fast) {
- si_setcoreidx(sih, origidx);
- INTR_RESTORE(sii, intr_val);
- }
- return fpdelay;
-}
-
-/* turn primary xtal and/or pll off/on */
-int si_clkctl_xtal(si_t *sih, uint what, bool on)
-{
- si_info_t *sii;
- u32 in, out, outen;
-
- sii = SI_INFO(sih);
-
- switch (sih->bustype) {
-
- case SDIO_BUS:
- return -1;
-
- case PCI_BUS:
- /* pcie core doesn't have any mapping to control the xtal pu */
- if (PCIE(sii))
- return -1;
-
- pci_read_config_dword(sii->pbus, PCI_GPIO_IN, &in);
- pci_read_config_dword(sii->pbus, PCI_GPIO_OUT, &out);
- pci_read_config_dword(sii->pbus, PCI_GPIO_OUTEN, &outen);
-
- /*
- * Avoid glitching the clock if GPRS is already using it.
- * We can't actually read the state of the PLLPD so we infer it
- * by the value of XTAL_PU which *is* readable via gpioin.
- */
- if (on && (in & PCI_CFG_GPIO_XTAL))
- return 0;
-
- if (what & XTAL)
- outen |= PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- outen |= PCI_CFG_GPIO_PLL;
-
- if (on) {
- /* turn primary xtal on */
- if (what & XTAL) {
- out |= PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- out |= PCI_CFG_GPIO_PLL;
- pci_write_config_dword(sii->pbus,
- PCI_GPIO_OUT, out);
- pci_write_config_dword(sii->pbus,
- PCI_GPIO_OUTEN, outen);
- udelay(XTAL_ON_DELAY);
- }
-
- /* turn pll on */
- if (what & PLL) {
- out &= ~PCI_CFG_GPIO_PLL;
- pci_write_config_dword(sii->pbus,
- PCI_GPIO_OUT, out);
- mdelay(2);
- }
- } else {
- if (what & XTAL)
- out &= ~PCI_CFG_GPIO_XTAL;
- if (what & PLL)
- out |= PCI_CFG_GPIO_PLL;
- pci_write_config_dword(sii->pbus,
- PCI_GPIO_OUT, out);
- pci_write_config_dword(sii->pbus,
- PCI_GPIO_OUTEN, outen);
- }
-
- default:
- return -1;
- }
-
- return 0;
-}
-
-/*
- * clock control policy function through chipcommon
- *
- * set dynamic clk control mode (forceslow, forcefast, dynamic)
- * returns true if we are forcing fast clock
- * this is a wrapper over the next internal function
- * to allow flexible policy settings for outside caller
- */
-bool si_clkctl_cc(si_t *sih, uint mode)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- /* chipcommon cores prior to rev6 don't support dynamic clock control */
- if (sih->ccrev < 6)
- return false;
-
- if (PCI_FORCEHT(sii))
- return mode == CLK_FAST;
-
- return _si_clkctl_cc(sii, mode);
-}
-
-/* clk control mechanism through chipcommon, no policy checking */
-static bool _si_clkctl_cc(si_info_t *sii, uint mode)
-{
- uint origidx = 0;
- chipcregs_t *cc;
- u32 scc;
- uint intr_val = 0;
- bool fast = SI_FAST(sii);
-
- /* chipcommon cores prior to rev6 don't support dynamic clock control */
- if (sii->pub.ccrev < 6)
- return false;
-
- if (!fast) {
- INTR_OFF(sii, intr_val);
- origidx = sii->curidx;
-
- if ((sii->pub.bustype == SI_BUS) &&
- si_setcore(&sii->pub, MIPS33_CORE_ID, 0) &&
- (si_corerev(&sii->pub) <= 7) && (sii->pub.ccrev >= 10))
- goto done;
-
- cc = (chipcregs_t *) si_setcore(&sii->pub, CC_CORE_ID, 0);
- } else {
- cc = (chipcregs_t *) CCREGS_FAST(sii);
- if (cc == NULL)
- goto done;
- }
-
- if (!CCCTL_ENAB(&sii->pub) && (sii->pub.ccrev < 20))
- goto done;
-
- switch (mode) {
- case CLK_FAST: /* FORCEHT, fast (pll) clock */
- if (sii->pub.ccrev < 10) {
- /* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
- si_clkctl_xtal(&sii->pub, XTAL, ON);
- SET_REG(&cc->slow_clk_ctl,
- (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
- } else if (sii->pub.ccrev < 20) {
- OR_REG(&cc->system_clk_ctl, SYCC_HR);
- } else {
- OR_REG(&cc->clk_ctl_st, CCS_FORCEHT);
- }
-
- /* wait for the PLL */
- if (PMUCTL_ENAB(&sii->pub)) {
- u32 htavail = CCS_HTAVAIL;
- SPINWAIT(((R_REG(&cc->clk_ctl_st) & htavail)
- == 0), PMU_MAX_TRANSITION_DLY);
- } else {
- udelay(PLL_DELAY);
- }
- break;
-
- case CLK_DYNAMIC: /* enable dynamic clock control */
- if (sii->pub.ccrev < 10) {
- scc = R_REG(&cc->slow_clk_ctl);
- scc &= ~(SCC_FS | SCC_IP | SCC_XC);
- if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
- scc |= SCC_XC;
- W_REG(&cc->slow_clk_ctl, scc);
-
- /* for dynamic control, we have to release our xtal_pu "force on" */
- if (scc & SCC_XC)
- si_clkctl_xtal(&sii->pub, XTAL, OFF);
- } else if (sii->pub.ccrev < 20) {
- /* Instaclock */
- AND_REG(&cc->system_clk_ctl, ~SYCC_HR);
- } else {
- AND_REG(&cc->clk_ctl_st, ~CCS_FORCEHT);
- }
- break;
-
- default:
- break;
- }
-
- done:
- if (!fast) {
- si_setcoreidx(&sii->pub, origidx);
- INTR_RESTORE(sii, intr_val);
- }
- return mode == CLK_FAST;
-}
-
-/* Build device path. Support SI, PCI, and JTAG for now. */
-int si_devpath(si_t *sih, char *path, int size)
-{
- int slen;
-
- if (!path || size <= 0)
- return -1;
-
- switch (sih->bustype) {
- case SI_BUS:
- case JTAG_BUS:
- slen = snprintf(path, (size_t) size, "sb/%u/", si_coreidx(sih));
- break;
- case PCI_BUS:
- slen = snprintf(path, (size_t) size, "pci/%u/%u/",
- ((struct pci_dev *)((SI_INFO(sih))->pbus))->bus->number,
- PCI_SLOT(
- ((struct pci_dev *)((SI_INFO(sih))->pbus))->devfn));
- break;
-
- case SDIO_BUS:
- SI_ERROR(("si_devpath: device 0 assumed\n"));
- slen = snprintf(path, (size_t) size, "sd/%u/", si_coreidx(sih));
- break;
-
- default:
- slen = -1;
- break;
- }
-
- if (slen < 0 || slen >= size) {
- path[0] = '\0';
- return -1;
- }
-
- return 0;
-}
-
-/* Get a variable, but only if it has a devpath prefix */
-char *si_getdevpathvar(si_t *sih, const char *name)
-{
- char varname[SI_DEVPATH_BUFSZ + 32];
-
- si_devpathvar(sih, varname, sizeof(varname), name);
-
- return getvar(NULL, varname);
-}
-
-/* Get a variable, but only if it has a devpath prefix */
-int si_getdevpathintvar(si_t *sih, const char *name)
-{
-#if defined(BCMBUSTYPE) && (BCMBUSTYPE == SI_BUS)
- return getintvar(NULL, name);
-#else
- char varname[SI_DEVPATH_BUFSZ + 32];
-
- si_devpathvar(sih, varname, sizeof(varname), name);
-
- return getintvar(NULL, varname);
-#endif
-}
-
-char *si_getnvramflvar(si_t *sih, const char *name)
-{
- return getvar(NULL, name);
-}
-
-/* Concatenate the dev path with a varname into the given 'var' buffer
- * and return the 'var' pointer.
- * Nothing is done to the arguments if len == 0 or var is NULL, var is still returned.
- * On overflow, the first char will be set to '\0'.
- */
-static char *si_devpathvar(si_t *sih, char *var, int len, const char *name)
-{
- uint path_len;
-
- if (!var || len <= 0)
- return var;
-
- if (si_devpath(sih, var, len) == 0) {
- path_len = strlen(var);
-
- if (strlen(name) + 1 > (uint) (len - path_len))
- var[0] = '\0';
- else
- strncpy(var + path_len, name, len - path_len - 1);
- }
-
- return var;
-}
-
-/* return true if PCIE capability exists in the pci config space */
-static __used bool si_ispcie(si_info_t *sii)
-{
- u8 cap_ptr;
-
- if (sii->pub.bustype != PCI_BUS)
- return false;
-
- cap_ptr =
- pcicore_find_pci_capability(sii->pbus, PCI_CAP_PCIECAP_ID, NULL,
- NULL);
- if (!cap_ptr)
- return false;
-
- return true;
-}
-
-/* initialize the sdio core */
-void si_sdio_init(si_t *sih)
-{
- si_info_t *sii = SI_INFO(sih);
-
- if (((sih->buscoretype == PCMCIA_CORE_ID) && (sih->buscorerev >= 8)) ||
- (sih->buscoretype == SDIOD_CORE_ID)) {
- uint idx;
- sdpcmd_regs_t *sdpregs;
-
- /* get the current core index */
- idx = sii->curidx;
-
- /* switch to sdio core */
- sdpregs = (sdpcmd_regs_t *) si_setcore(sih, PCMCIA_CORE_ID, 0);
- if (!sdpregs)
- sdpregs =
- (sdpcmd_regs_t *) si_setcore(sih, SDIOD_CORE_ID, 0);
-
- SI_MSG(("si_sdio_init: For PCMCIA/SDIO Corerev %d, enable ints from core %d " "through SD core %d (%p)\n", sih->buscorerev, idx, sii->curidx, sdpregs));
-
- /* enable backplane error and core interrupts */
- W_REG(&sdpregs->hostintmask, I_SBINT);
- W_REG(&sdpregs->sbintmask,
- (I_SB_SERR | I_SB_RESPERR | (1 << idx)));
-
- /* switch back to previous core */
- si_setcoreidx(sih, idx);
- }
-
- /* enable interrupts */
- bcmsdh_intr_enable(sii->pbus);
-
-}
-
-bool si_pci_war16165(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- return PCI(sii) && (sih->buscorerev <= 10);
-}
-
-void si_pci_up(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- /* if not pci bus, we're done */
- if (sih->bustype != PCI_BUS)
- return;
-
- if (PCI_FORCEHT(sii))
- _si_clkctl_cc(sii, CLK_FAST);
-
- if (PCIE(sii))
- pcicore_up(sii->pch, SI_PCIUP);
-
-}
-
-/* Unconfigure and/or apply various WARs when system is going to sleep mode */
-void si_pci_sleep(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- pcicore_sleep(sii->pch);
-}
-
-/* Unconfigure and/or apply various WARs when going down */
-void si_pci_down(si_t *sih)
-{
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- /* if not pci bus, we're done */
- if (sih->bustype != PCI_BUS)
- return;
-
- /* release FORCEHT since chip is going to "down" state */
- if (PCI_FORCEHT(sii))
- _si_clkctl_cc(sii, CLK_DYNAMIC);
-
- pcicore_down(sii->pch, SI_PCIDOWN);
-}
-
-/*
- * Configure the pci core for pci client (NIC) action
- * coremask is the bitvec of cores by index to be enabled.
- */
-void si_pci_setup(si_t *sih, uint coremask)
-{
- si_info_t *sii;
- struct sbpciregs *pciregs = NULL;
- u32 siflag = 0, w;
- uint idx = 0;
-
- sii = SI_INFO(sih);
-
- if (sii->pub.bustype != PCI_BUS)
- return;
-
- if (PCI(sii)) {
- /* get current core index */
- idx = sii->curidx;
-
- /* we interrupt on this backplane flag number */
- siflag = si_flag(sih);
-
- /* switch over to pci core */
- pciregs = (struct sbpciregs *)si_setcoreidx(sih, sii->pub.buscoreidx);
- }
-
- /*
- * Enable sb->pci interrupts. Assume
- * PCI rev 2.3 support was added in pci core rev 6 and things changed..
- */
- if (PCIE(sii) || (PCI(sii) && ((sii->pub.buscorerev) >= 6))) {
- /* pci config write to set this core bit in PCIIntMask */
- pci_read_config_dword(sii->pbus, PCI_INT_MASK, &w);
- w |= (coremask << PCI_SBIM_SHIFT);
- pci_write_config_dword(sii->pbus, PCI_INT_MASK, w);
- } else {
- /* set sbintvec bit for our flag number */
- si_setint(sih, siflag);
- }
-
- if (PCI(sii)) {
- OR_REG(&pciregs->sbtopci2,
- (SBTOPCI_PREF | SBTOPCI_BURST));
- if (sii->pub.buscorerev >= 11) {
- OR_REG(&pciregs->sbtopci2,
- SBTOPCI_RC_READMULTI);
- w = R_REG(&pciregs->clkrun);
- W_REG(&pciregs->clkrun,
- (w | PCI_CLKRUN_DSBL));
- w = R_REG(&pciregs->clkrun);
- }
-
- /* switch back to previous core */
- si_setcoreidx(sih, idx);
- }
-}
-
-/*
- * Fixup SROMless PCI device's configuration.
- * The current core may be changed upon return.
- */
-int si_pci_fixcfg(si_t *sih)
-{
- uint origidx, pciidx;
- struct sbpciregs *pciregs = NULL;
- sbpcieregs_t *pcieregs = NULL;
- void *regs = NULL;
- u16 val16, *reg16 = NULL;
-
- si_info_t *sii = SI_INFO(sih);
-
- /* Fixup PI in SROM shadow area to enable the correct PCI core access */
- /* save the current index */
- origidx = si_coreidx(&sii->pub);
-
- /* check 'pi' is correct and fix it if not */
- if (sii->pub.buscoretype == PCIE_CORE_ID) {
- pcieregs =
- (sbpcieregs_t *) si_setcore(&sii->pub, PCIE_CORE_ID, 0);
- regs = pcieregs;
- reg16 = &pcieregs->sprom[SRSH_PI_OFFSET];
- } else if (sii->pub.buscoretype == PCI_CORE_ID) {
- pciregs = (struct sbpciregs *)si_setcore(&sii->pub, PCI_CORE_ID, 0);
- regs = pciregs;
- reg16 = &pciregs->sprom[SRSH_PI_OFFSET];
- }
- pciidx = si_coreidx(&sii->pub);
- val16 = R_REG(reg16);
- if (((val16 & SRSH_PI_MASK) >> SRSH_PI_SHIFT) != (u16) pciidx) {
- val16 =
- (u16) (pciidx << SRSH_PI_SHIFT) | (val16 &
- ~SRSH_PI_MASK);
- W_REG(reg16, val16);
- }
-
- /* restore the original index */
- si_setcoreidx(&sii->pub, origidx);
-
- pcicore_hwup(sii->pch);
- return 0;
-}
-
-/* mask&set gpiocontrol bits */
-u32 si_gpiocontrol(si_t *sih, u32 mask, u32 val, u8 priority)
-{
- uint regoff;
-
- regoff = 0;
-
- /* gpios could be shared on router platforms
- * ignore reservation if it's high priority (e.g., test apps)
- */
- if ((priority != GPIO_HI_PRIORITY) &&
- (sih->bustype == SI_BUS) && (val || mask)) {
- mask = priority ? (si_gpioreservation & mask) :
- ((si_gpioreservation | mask) & ~(si_gpioreservation));
- val &= mask;
- }
-
- regoff = offsetof(chipcregs_t, gpiocontrol);
- return si_corereg(sih, SI_CC_IDX, regoff, mask, val);
-}
-
-/* Return the size of the specified SOCRAM bank */
-static uint
-socram_banksize(si_info_t *sii, sbsocramregs_t *regs, u8 index,
- u8 mem_type)
-{
- uint banksize, bankinfo;
- uint bankidx = index | (mem_type << SOCRAM_BANKIDX_MEMTYPE_SHIFT);
-
- W_REG(®s->bankidx, bankidx);
- bankinfo = R_REG(®s->bankinfo);
- banksize =
- SOCRAM_BANKINFO_SZBASE * ((bankinfo & SOCRAM_BANKINFO_SZMASK) + 1);
- return banksize;
-}
-
-/* Return the RAM size of the SOCRAM core */
-u32 si_socram_size(si_t *sih)
-{
- si_info_t *sii;
- uint origidx;
- uint intr_val = 0;
-
- sbsocramregs_t *regs;
- bool wasup;
- uint corerev;
- u32 coreinfo;
- uint memsize = 0;
-
- sii = SI_INFO(sih);
-
- /* Block ints and save current core */
- INTR_OFF(sii, intr_val);
- origidx = si_coreidx(sih);
-
- /* Switch to SOCRAM core */
- regs = si_setcore(sih, SOCRAM_CORE_ID, 0);
- if (!regs)
- goto done;
-
- /* Get info for determining size */
- wasup = si_iscoreup(sih);
- if (!wasup)
- si_core_reset(sih, 0, 0);
- corerev = si_corerev(sih);
- coreinfo = R_REG(®s->coreinfo);
-
- /* Calculate size from coreinfo based on rev */
- if (corerev == 0)
- memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK));
- else if (corerev < 3) {
- memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK));
- memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
- } else if ((corerev <= 7) || (corerev == 12)) {
- uint nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
- uint bsz = (coreinfo & SRCI_SRBSZ_MASK);
- uint lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
- if (lss != 0)
- nb--;
- memsize = nb * (1 << (bsz + SR_BSZ_BASE));
- if (lss != 0)
- memsize += (1 << ((lss - 1) + SR_BSZ_BASE));
- } else {
- u8 i;
- uint nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
- for (i = 0; i < nb; i++)
- memsize +=
- socram_banksize(sii, regs, i, SOCRAM_MEMTYPE_RAM);
- }
-
- /* Return to previous state and core */
- if (!wasup)
- si_core_disable(sih, 0);
- si_setcoreidx(sih, origidx);
-
- done:
- INTR_RESTORE(sii, intr_val);
-
- return memsize;
-}
-
-void si_chipcontrl_epa4331(si_t *sih, bool on)
-{
- si_info_t *sii;
- chipcregs_t *cc;
- uint origidx;
- u32 val;
-
- sii = SI_INFO(sih);
- origidx = si_coreidx(sih);
-
- cc = (chipcregs_t *) si_setcore(sih, CC_CORE_ID, 0);
-
- val = R_REG(&cc->chipcontrol);
-
- if (on) {
- if (sih->chippkg == 9 || sih->chippkg == 0xb) {
- /* Ext PA Controls for 4331 12x9 Package */
- W_REG(&cc->chipcontrol, val |
- (CCTRL4331_EXTPA_EN |
- CCTRL4331_EXTPA_ON_GPIO2_5));
- } else {
- /* Ext PA Controls for 4331 12x12 Package */
- W_REG(&cc->chipcontrol,
- val | (CCTRL4331_EXTPA_EN));
- }
- } else {
- val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5);
- W_REG(&cc->chipcontrol, val);
- }
-
- si_setcoreidx(sih, origidx);
-}
-
-/* Enable BT-COEX & Ex-PA for 4313 */
-void si_epa_4313war(si_t *sih)
-{
- si_info_t *sii;
- chipcregs_t *cc;
- uint origidx;
-
- sii = SI_INFO(sih);
- origidx = si_coreidx(sih);
-
- cc = (chipcregs_t *) si_setcore(sih, CC_CORE_ID, 0);
-
- /* EPA Fix */
- W_REG(&cc->gpiocontrol,
- R_REG(&cc->gpiocontrol) | GPIO_CTRL_EPA_EN_MASK);
-
- si_setcoreidx(sih, origidx);
-}
-
-/* check if the device is removed */
-bool si_deviceremoved(si_t *sih)
-{
- u32 w;
- si_info_t *sii;
-
- sii = SI_INFO(sih);
-
- switch (sih->bustype) {
- case PCI_BUS:
- pci_read_config_dword(sii->pbus, PCI_CFG_VID, &w);
- if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM)
- return true;
- break;
- }
- return false;
-}
-
-bool si_is_sprom_available(si_t *sih)
-{
- if (sih->ccrev >= 31) {
- si_info_t *sii;
- uint origidx;
- chipcregs_t *cc;
- u32 sromctrl;
-
- if ((sih->cccaps & CC_CAP_SROM) == 0)
- return false;
-
- sii = SI_INFO(sih);
- origidx = sii->curidx;
- cc = si_setcoreidx(sih, SI_CC_IDX);
- sromctrl = R_REG(&cc->sromcontrol);
- si_setcoreidx(sih, origidx);
- return sromctrl & SRC_PRESENT;
- }
-
- switch (sih->chip) {
- case BCM4329_CHIP_ID:
- return (sih->chipst & CST4329_SPROM_SEL) != 0;
- case BCM4319_CHIP_ID:
- return (sih->chipst & CST4319_SPROM_SEL) != 0;
- case BCM4336_CHIP_ID:
- return (sih->chipst & CST4336_SPROM_PRESENT) != 0;
- case BCM4330_CHIP_ID:
- return (sih->chipst & CST4330_SPROM_PRESENT) != 0;
- case BCM4313_CHIP_ID:
- return (sih->chipst & CST4313_SPROM_PRESENT) != 0;
- case BCM4331_CHIP_ID:
- return (sih->chipst & CST4331_SPROM_PRESENT) != 0;
- default:
- return true;
- }
-}
-
-bool si_is_otp_disabled(si_t *sih)
-{
- switch (sih->chip) {
- case BCM4329_CHIP_ID:
- return (sih->chipst & CST4329_SPROM_OTP_SEL_MASK) ==
- CST4329_OTP_PWRDN;
- case BCM4319_CHIP_ID:
- return (sih->chipst & CST4319_SPROM_OTP_SEL_MASK) ==
- CST4319_OTP_PWRDN;
- case BCM4336_CHIP_ID:
- return (sih->chipst & CST4336_OTP_PRESENT) == 0;
- case BCM4330_CHIP_ID:
- return (sih->chipst & CST4330_OTP_PRESENT) == 0;
- case BCM4313_CHIP_ID:
- return (sih->chipst & CST4313_OTP_PRESENT) == 0;
- /* These chips always have their OTP on */
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- case BCM43421_CHIP_ID:
- case BCM43235_CHIP_ID:
- case BCM43236_CHIP_ID:
- case BCM43238_CHIP_ID:
- case BCM4331_CHIP_ID:
- default:
- return false;
- }
-}
diff --git a/drivers/staging/brcm80211/util/siutils_priv.h b/drivers/staging/brcm80211/util/siutils_priv.h
deleted file mode 100644
index a03ff61..0000000
--- a/drivers/staging/brcm80211/util/siutils_priv.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _siutils_priv_h_
-#define _siutils_priv_h_
-
-/* Silicon Backplane externs */
-extern void sb_scan(si_t *sih, void *regs, uint devid);
-uint sb_coreid(si_t *sih);
-uint sb_corerev(si_t *sih);
-extern uint sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask,
- uint val);
-extern bool sb_iscoreup(si_t *sih);
-void *sb_setcoreidx(si_t *sih, uint coreidx);
-extern void sb_core_reset(si_t *sih, u32 bits, u32 resetbits);
-extern void sb_core_disable(si_t *sih, u32 bits);
-#endif /* _siutils_priv_h_ */
--
1.7.1
^ permalink raw reply related [flat|nested] 9+ messages in thread