linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: Matteo Croce <matteo@openwrt.org>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH v2] 802.11n frame injection
Date: Wed, 11 May 2011 12:49:21 -0400	[thread overview]
Message-ID: <20110511164920.GD2490@tuxdriver.com> (raw)
In-Reply-To: <BANLkTikBEs7aWZR+UovtpwYVPJfZjHEhgw@mail.gmail.com>

  CC [M]  net/mac80211/tx.o
net/mac80211/tx.c: In function ‘__ieee80211_parse_tx_radiotap’:
net/mac80211/tx.c:1095:21: error: ‘sband’ undeclared (first use in this function)
net/mac80211/tx.c:1095:21: note: each undeclared identifier is reported only once for each function it appears in

Also, please add "mac80211:" as a prefix in the subject, and correct
the commit message to not reference received frames.

On Fri, Apr 22, 2011 at 06:34:59PM +0200, Matteo Croce wrote:
> This patch allows to set the tx rate and retries when injecting,
> and report correct MCS information on received frames.
> This v2 version sets IEEE80211_TX_STATUS_HEADROOM to a correct value
> 
> Signed-off-by: Matteo Croce <matteo@openwrt.org>
> 
> --- a/net/mac80211/tx.c	2011-04-22 11:34:08.825135198 +0200
> +++ b/net/mac80211/tx.c	2011-04-22 11:34:54.037135187 +0200
> @@ -1091,6 +1091,44 @@
>  				tx->flags |= IEEE80211_TX_FRAGMENTED;
>  			break;
> 
> +		case IEEE80211_RADIOTAP_RATE: {
> +			info->control.rates[0].idx = 0;
> +			if (*iterator.this_arg) {
> +				int i;
> +				for (i = 0; i < sband->n_bitrates; i++)
> +					if (sband->bitrates[i].bitrate ==
> +						*iterator.this_arg * 5) {
> +						info->control.rates[0].idx = i;
> +						break;
> +					}
> +			}
> +			info->control.rates[0].flags = 0;
> +			info->control.rates[1].idx = -1;
> +			info->control.rates[2].idx = -1;
> +			info->control.rates[3].idx = -1;
> +			info->control.rates[4].idx = -1;
> +			break;
> +		}
> +
> +		case IEEE80211_RADIOTAP_DATA_RETRIES:
> +			info->control.rates[0].count = *iterator.this_arg;
> +			break;
> +
> +		case IEEE80211_RADIOTAP_MCS: {
> +			u8 flags = iterator.this_arg[1];
> +			u8 mcs = iterator.this_arg[2];
> +			info->control.rates[0].idx = mcs;
> +			info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_MCS;
> +			if (flags & IEEE80211_RADIOTAP_MCS_BW_40)
> +				info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_40_MHZ_WIDTH;
> +			if (flags & IEEE80211_RADIOTAP_MCS_SGI)
> +				info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_SHORT_GI;
> +			break;
> +		}
> +
>  		/*
>  		 * Please update the file
>  		 * Documentation/networking/mac80211-injection.txt
> --- a/net/mac80211/ieee80211_i.h	2011-04-22 11:34:08.829135198 +0200
> +++ b/net/mac80211/ieee80211_i.h	2011-04-22 11:34:54.037135187 +0200
> @@ -1197,6 +1197,10 @@
>  	u8 padding_for_rate;
>  	__le16 tx_flags;
>  	u8 data_retries;
> +	/*HT info*/
> +	u8 ht_known;
> +	u8 ht_flag;
> +	u8 ht_mcs;
>  } __packed;
> 
> 
> --- a/net/mac80211/status.c	2011-04-22 11:34:08.833135198 +0200
> +++ b/net/mac80211/status.c	2011-04-22 11:34:54.037135187 +0200
> @@ -405,6 +405,19 @@
>  	    !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
>  		rthdr->rate = sband->bitrates[
>  				info->status.rates[0].idx].bitrate / 5;
> +	/* HT rates */
> +	if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
> +		rthdr->hdr.it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS);
> +		rthdr->rate = 0;
> +		rthdr->ht_known =	IEEE80211_RADIOTAP_MCS_HAVE_BW |
> +					IEEE80211_RADIOTAP_MCS_HAVE_MCS |
> +					IEEE80211_RADIOTAP_MCS_HAVE_GI;
> +		rthdr->ht_mcs = info->status.rates[0].idx;
> +		if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
> +			rthdr->ht_flag |= IEEE80211_RADIOTAP_MCS_BW_40;
> +		if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
> +			rthdr->ht_flag |= IEEE80211_RADIOTAP_MCS_SGI;
> +	}
> 
>  	/* for now report the total retry_count */
>  	rthdr->data_retries = retry_count;
> --- a/net/wireless/radiotap.c	2011-04-22 11:34:08.833135198 +0200
> +++ b/net/wireless/radiotap.c	2011-04-22 11:34:54.037135187 +0200
> @@ -40,6 +40,7 @@
>  	[IEEE80211_RADIOTAP_TX_FLAGS] = { .align = 2, .size = 2, },
>  	[IEEE80211_RADIOTAP_RTS_RETRIES] = { .align = 1, .size = 1, },
>  	[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
> +	[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
>  	/*
>  	 * add more here as they are defined in radiotap.h
>  	 */
> --- a/include/net/mac80211.h	2011-04-22 11:38:01.389135142 +0200
> +++ b/include/net/mac80211.h	2011-04-22 11:40:22.017135111 +0200
> @@ -2228,7 +2228,7 @@
>   * The TX headroom reserved by mac80211 for its own tx_status functions.
>   * This is enough for the radiotap header.
>   */
> -#define IEEE80211_TX_STATUS_HEADROOM	13
> +#define IEEE80211_TX_STATUS_HEADROOM	16
> 
>  /**
>   * ieee80211_sta_set_tim - set the TIM bit for a sleeping station
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

  parent reply	other threads:[~2011-05-11 17:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-22 16:34 [PATCH v2] 802.11n frame injection Matteo Croce
2011-04-24  8:15 ` Johannes Berg
2011-04-24 19:14   ` Maxim Levitsky
2011-04-24 20:42     ` Matteo Croce
2011-05-11 16:49 ` John W. Linville [this message]
2011-05-11 17:06 ` Johannes Berg
2011-05-14 22:07   ` Matteo Croce
2011-05-18 22:49     ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110511164920.GD2490@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=matteo@openwrt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).