linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: linux-wireless@vger.kernel.org
Cc: joe@perches.com, devel@linuxdriverproject.org, gregkh@suse.de,
	error27@gmail.com
Subject: [PATCH v2 07/23] ath6kl: add debug.c
Date: Sun, 17 Jul 2011 13:21:52 +0300	[thread overview]
Message-ID: <20110717102152.18367.17821.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110717101844.18367.44984.stgit@localhost6.localdomain6>

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/debug.c |  150 +++++++++++++++++++++++++++++++
 1 files changed, 150 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath6kl/debug.c

diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
new file mode 100644
index 0000000..ea11e7b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2004-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "debug.h"
+
+int ath6kl_printk(const char *level, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+	int rtn;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	rtn = printk("%sath6kl: %pV", level, &vaf);
+
+	va_end(args);
+
+	return rtn;
+}
+
+#ifdef CONFIG_ATH6KL_DEBUG
+void ath6kl_dump_registers(struct ath6kl_device *dev,
+			   struct ath6kl_irq_proc_registers *irq_proc_reg,
+			   struct ath6kl_irq_enable_reg *irq_enable_reg)
+{
+
+	ath6kl_dbg(ATH6KL_DBG_ANY, ("<------- Register Table -------->\n"));
+
+	if (irq_proc_reg != NULL) {
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			"Host Int status:           0x%x\n",
+			irq_proc_reg->host_int_status);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "CPU Int status:            0x%x\n",
+			irq_proc_reg->cpu_int_status);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Error Int status:          0x%x\n",
+			irq_proc_reg->error_int_status);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Counter Int status:        0x%x\n",
+			irq_proc_reg->counter_int_status);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Mbox Frame:                0x%x\n",
+			irq_proc_reg->mbox_frame);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Rx Lookahead Valid:        0x%x\n",
+			irq_proc_reg->rx_lkahd_valid);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Rx Lookahead 0:            0x%x\n",
+			irq_proc_reg->rx_lkahd[0]);
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			   "Rx Lookahead 1:            0x%x\n",
+			irq_proc_reg->rx_lkahd[1]);
+
+		if (dev->ar->mbox_info.gmbox_addr != 0) {
+			/*
+			 * If the target supports GMBOX hardware, dump some
+			 * additional state.
+			 */
+			ath6kl_dbg(ATH6KL_DBG_ANY,
+				"GMBOX Host Int status 2:   0x%x\n",
+				irq_proc_reg->host_int_status2);
+			ath6kl_dbg(ATH6KL_DBG_ANY,
+				"GMBOX RX Avail:            0x%x\n",
+				irq_proc_reg->gmbox_rx_avail);
+			ath6kl_dbg(ATH6KL_DBG_ANY,
+				"GMBOX lookahead alias 0:   0x%x\n",
+				irq_proc_reg->rx_gmbox_lkahd_alias[0]);
+			ath6kl_dbg(ATH6KL_DBG_ANY,
+				"GMBOX lookahead alias 1:   0x%x\n",
+				irq_proc_reg->rx_gmbox_lkahd_alias[1]);
+		}
+
+	}
+
+	if (irq_enable_reg != NULL) {
+		ath6kl_dbg(ATH6KL_DBG_ANY,
+			"Int status Enable:         0x%x\n",
+			irq_enable_reg->int_status_en);
+		ath6kl_dbg(ATH6KL_DBG_ANY, "Counter Int status Enable: 0x%x\n",
+			irq_enable_reg->cntr_int_status_en);
+	}
+	ath6kl_dbg(ATH6KL_DBG_ANY, "<------------------------------->");
+}
+
+static void dump_cred_dist(struct htc_endpoint_credit_dist *ep_dist)
+{
+	ath6kl_dbg(ATH6KL_DBG_ANY,
+		   "--- endpoint: %d  svc_id: 0x%X ---\n",
+		   ep_dist->endpoint, ep_dist->svc_id);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " dist_flags     : 0x%X\n",
+		   ep_dist->dist_flags);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_norm      : %d\n",
+		   ep_dist->cred_norm);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_min       : %d\n",
+		   ep_dist->cred_min);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " credits        : %d\n",
+		   ep_dist->credits);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_assngd    : %d\n",
+		   ep_dist->cred_assngd);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " seek_cred      : %d\n",
+		   ep_dist->seek_cred);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_sz        : %d\n",
+		   ep_dist->cred_sz);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_per_msg   : %d\n",
+		   ep_dist->cred_per_msg);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " cred_to_dist   : %d\n",
+		   ep_dist->cred_to_dist);
+	ath6kl_dbg(ATH6KL_DBG_ANY, " txq_depth      : %d\n",
+		   get_queue_depth(&((struct htc_endpoint *)
+				     ep_dist->htc_rsvd)->txq));
+	ath6kl_dbg(ATH6KL_DBG_ANY,
+		   "----------------------------------\n");
+}
+
+void dump_cred_dist_stats(struct htc_target *target)
+{
+	struct htc_endpoint_credit_dist *ep_list;
+
+	if (!AR_DBG_LVL_CHECK(ATH6KL_DBG_TRC))
+		return;
+
+	list_for_each_entry(ep_list, &target->cred_dist_list, list)
+		dump_cred_dist(ep_list);
+
+	ath6kl_dbg(ATH6KL_DBG_HTC_SEND, "ctxt:%p dist:%p\n",
+		   target->cred_dist_cntxt, NULL);
+	ath6kl_dbg(ATH6KL_DBG_TRC, "credit distribution, total : %d, free : %d\n",
+		   target->cred_dist_cntxt->total_avail_credits,
+		   target->cred_dist_cntxt->cur_free_credits);
+}
+
+#endif


  parent reply	other threads:[~2011-07-17 10:21 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-17 10:20 [PATCH v2 00/23] ath6kl cleaned up driver Kalle Valo
2011-07-17 10:20 ` [PATCH v2 01/23] ath6kl: add bmi.c Kalle Valo
2011-07-17 10:20 ` [PATCH v2 02/23] ath6kl: add bmi.h Kalle Valo
2011-07-17 10:21 ` [PATCH v2 03/23] ath6kl: add cfg80211.c Kalle Valo
2011-07-17 11:12   ` Johannes Berg
2011-07-17 19:40     ` Kalle Valo
2011-07-17 10:21 ` [PATCH v2 04/23] ath6kl: add cfg80211.h Kalle Valo
2011-07-17 10:21 ` [PATCH v2 05/23] ath6kl: add common.h Kalle Valo
2011-07-17 10:21 ` [PATCH v2 06/23] ath6kl: add core.h Kalle Valo
2011-07-17 10:21 ` Kalle Valo [this message]
2011-07-17 10:22 ` [PATCH v2 08/23] ath6kl: add debug.h Kalle Valo
2011-07-17 10:22 ` [PATCH v2 09/23] ath6kl: add hif-ops.h Kalle Valo
2011-07-17 10:22 ` [PATCH v2 10/23] ath6kl: add hif.h Kalle Valo
2011-07-17 10:22 ` [PATCH v2 11/23] ath6kl: add htc.c Kalle Valo
2011-07-17 10:22 ` [PATCH v2 12/23] ath6kl: add htc.h Kalle Valo
2011-07-17 10:22 ` [PATCH v2 13/23] ath6kl: add htc_hif.c Kalle Valo
2011-07-17 10:23 ` [PATCH v2 14/23] ath6kl: add htc_hif.h Kalle Valo
2011-07-17 10:23 ` [PATCH v2 15/23] ath6kl: add init.c Kalle Valo
2011-07-17 10:23 ` [PATCH v2 16/23] ath6kl: add main.c Kalle Valo
2011-07-17 10:23 ` [PATCH v2 17/23] ath6kl: add node.c Kalle Valo
2011-07-17 10:23 ` [PATCH v2 18/23] ath6kl: add sdio.c Kalle Valo
2011-07-17 10:24 ` [PATCH v2 19/23] ath6kl: add target.h Kalle Valo
2011-07-17 10:24 ` [PATCH v2 20/23] ath6kl: add txrx.c Kalle Valo
2011-07-17 10:24 ` [PATCH v2 21/23] ath6kl: add wmi.c Kalle Valo
2011-07-17 10:24 ` [PATCH v2 22/23] ath6kl: add wmi.h Kalle Valo
2011-07-17 10:24 ` [PATCH v2 23/23] ath6kl: add Kconfig and Makefile Kalle Valo
2011-07-17 10:57 ` [PATCH v2 00/23] ath6kl cleaned up driver Kalle Valo
2011-07-19  4:21 ` Ali Bahar
2011-07-19  4:26   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110717102152.18367.17821.stgit@localhost6.localdomain6 \
    --to=kvalo@qca.qualcomm.com \
    --cc=devel@linuxdriverproject.org \
    --cc=error27@gmail.com \
    --cc=gregkh@suse.de \
    --cc=joe@perches.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).