From: Kalle Valo <kvalo@qca.qualcomm.com>
To: linux-wireless@vger.kernel.org
Cc: joe@perches.com, devel@linuxdriverproject.org, gregkh@suse.de,
error27@gmail.com
Subject: [PATCH v3 08/23] ath6kl: add debug.h
Date: Mon, 18 Jul 2011 00:41:38 +0300 [thread overview]
Message-ID: <20110717214138.23534.88259.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110717213832.23534.75274.stgit@localhost6.localdomain6>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath6kl/debug.h | 104 +++++++++++++++++++++++++++++++
1 files changed, 104 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath6kl/debug.h
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
new file mode 100644
index 0000000..2e60588
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (c) 2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#include "htc_hif.h"
+
+enum ATH6K_DEBUG_MASK {
+ ATH6KL_DBG_WLAN_CONNECT = BIT(0), /* wlan connect */
+ ATH6KL_DBG_WLAN_SCAN = BIT(1), /* wlan scan */
+ ATH6KL_DBG_WLAN_TX = BIT(2), /* wlan tx */
+ ATH6KL_DBG_WLAN_RX = BIT(3), /* wlan rx */
+ ATH6KL_DBG_BMI = BIT(4), /* bmi tracing */
+ ATH6KL_DBG_HTC_SEND = BIT(5), /* htc send */
+ ATH6KL_DBG_HTC_RECV = BIT(6), /* htc recv */
+ ATH6KL_DBG_IRQ = BIT(7), /* interrupt processing */
+ ATH6KL_DBG_PM = BIT(8), /* power management */
+ ATH6KL_DBG_WLAN_NODE = BIT(9), /* general wlan node tracing */
+ ATH6KL_DBG_WMI = BIT(10), /* wmi tracing */
+ ATH6KL_DBG_TRC = BIT(11), /* generic func tracing */
+ ATH6KL_DBG_SCATTER = BIT(12), /* hif scatter tracing */
+ ATH6KL_DBG_WLAN_CFG = BIT(13), /* cfg80211 i/f file tracing */
+ ATH6KL_DBG_RAW_BYTES = BIT(14), /* dump tx/rx and wmi frames */
+ ATH6KL_DBG_ANY = 0xffffffff /* enable all logs */
+};
+
+extern unsigned int debug_mask;
+extern int ath6kl_printk(const char *level, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
+#define ath6kl_info(fmt, ...) \
+ ath6kl_printk(KERN_INFO, fmt, ##__VA_ARGS__)
+#define ath6kl_err(fmt, ...) \
+ ath6kl_printk(KERN_ERR, fmt, ##__VA_ARGS__)
+#define ath6kl_warn(fmt, ...) \
+ ath6kl_printk(KERN_WARNING, fmt, ##__VA_ARGS__)
+
+#define AR_DBG_LVL_CHECK(mask) (debug_mask & mask)
+
+#ifdef CONFIG_ATH6KL_DEBUG
+#define ath6kl_dbg(mask, fmt, ...) \
+ ({ \
+ int rtn; \
+ if (debug_mask & mask) \
+ rtn = ath6kl_printk(KERN_DEBUG, fmt, ##__VA_ARGS__); \
+ else \
+ rtn = 0; \
+ \
+ rtn; \
+ })
+
+static inline void ath6kl_dbg_dump(enum ATH6K_DEBUG_MASK mask,
+ const char *msg, const void *buf,
+ size_t len)
+{
+ if (debug_mask & mask) {
+ ath6kl_dbg(mask, "%s\n", msg);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
+ }
+}
+
+void ath6kl_dump_registers(struct ath6kl_device *dev,
+ struct ath6kl_irq_proc_registers *irq_proc_reg,
+ struct ath6kl_irq_enable_reg *irq_en_reg);
+void dump_cred_dist_stats(struct htc_target *target);
+#else
+static inline int ath6kl_dbg(enum ATH6K_DEBUG_MASK dbg_mask,
+ const char *fmt, ...)
+{
+ return 0;
+}
+
+static inline void ath6kl_dbg_dump(enum ATH6K_DEBUG_MASK mask,
+ const char *msg, const void *buf,
+ size_t len)
+{
+}
+
+static inline void ath6kl_dump_registers(struct ath6kl_device *dev,
+ struct ath6kl_irq_proc_registers *irq_proc_reg,
+ struct ath6kl_irq_enable_reg *irq_en_reg)
+{
+
+}
+static inline void dump_cred_dist_stats(struct htc_target *target)
+{
+}
+#endif
+
+#endif
next prev parent reply other threads:[~2011-07-17 21:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-17 21:39 [PATCH v3 00/23] ath6kl cleaned up driver Kalle Valo
2011-07-17 21:40 ` [PATCH v3 01/23] ath6kl: add bmi.c Kalle Valo
2011-07-17 21:40 ` [PATCH v3 02/23] ath6kl: add bmi.h Kalle Valo
2011-07-17 21:40 ` [PATCH v3 03/23] ath6kl: add cfg80211.c Kalle Valo
2011-07-17 21:40 ` [PATCH v3 04/23] ath6kl: add cfg80211.h Kalle Valo
2011-07-17 21:41 ` [PATCH v3 05/23] ath6kl: add common.h Kalle Valo
2011-07-17 21:41 ` [PATCH v3 06/23] ath6kl: add core.h Kalle Valo
2011-07-17 21:41 ` [PATCH v3 07/23] ath6kl: add debug.c Kalle Valo
2011-07-17 21:41 ` Kalle Valo [this message]
2011-07-17 21:41 ` [PATCH v3 09/23] ath6kl: add hif-ops.h Kalle Valo
2011-07-17 21:42 ` [PATCH v3 10/23] ath6kl: add hif.h Kalle Valo
2011-07-17 21:42 ` [PATCH v3 11/23] ath6kl: add htc.c Kalle Valo
2011-07-17 21:42 ` [PATCH v3 12/23] ath6kl: add htc.h Kalle Valo
2011-07-17 21:42 ` [PATCH v3 13/23] ath6kl: add htc_hif.c Kalle Valo
2011-07-17 21:42 ` [PATCH v3 14/23] ath6kl: add htc_hif.h Kalle Valo
2011-07-17 21:42 ` [PATCH v3 15/23] ath6kl: add init.c Kalle Valo
2011-07-17 21:43 ` [PATCH v3 16/23] ath6kl: add main.c Kalle Valo
2011-07-17 21:43 ` [PATCH v3 17/23] ath6kl: add node.c Kalle Valo
2011-07-17 21:43 ` [PATCH v3 18/23] ath6kl: add sdio.c Kalle Valo
2011-07-17 21:43 ` [PATCH v3 19/23] ath6kl: add target.h Kalle Valo
2011-07-17 21:43 ` [PATCH v3 20/23] ath6kl: add txrx.c Kalle Valo
2011-07-17 21:44 ` [PATCH v3 21/23] ath6kl: add wmi.c Kalle Valo
2011-07-17 21:44 ` [PATCH v3 22/23] ath6kl: add wmi.h Kalle Valo
2011-07-17 21:44 ` [PATCH v3 23/23] ath6kl: add Kconfig and Makefile Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110717214138.23534.88259.stgit@localhost6.localdomain6 \
--to=kvalo@qca.qualcomm.com \
--cc=devel@linuxdriverproject.org \
--cc=error27@gmail.com \
--cc=gregkh@suse.de \
--cc=joe@perches.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox