From: Kalle Valo <kvalo@qca.qualcomm.com>
To: kvalo@qca.qualcomm.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 9/9] ath6kl: add more boot debug messages
Date: Mon, 24 Oct 2011 12:18:07 +0300 [thread overview]
Message-ID: <20111024091807.5004.7813.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20111024091644.5004.2767.stgit@localhost6.localdomain6>
Move some of the debug logs to boot level because they are more
interesting when debugging boot issues.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath6kl/htc.c | 8 ++++----
drivers/net/wireless/ath/ath6kl/sdio.c | 22 +++++++++++++---------
2 files changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/htc.c b/drivers/net/wireless/ath/ath6kl/htc.c
index a971c2f..976e352 100644
--- a/drivers/net/wireless/ath/ath6kl/htc.c
+++ b/drivers/net/wireless/ath/ath6kl/htc.c
@@ -2499,7 +2499,7 @@ static void htc_setup_msg_bndl(struct htc_target *target)
target->msg_per_bndl_max = min(target->max_scat_entries,
target->msg_per_bndl_max);
- ath6kl_dbg(ATH6KL_DBG_HTC,
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
"htc bundling allowed msg_per_bndl_max %d\n",
target->msg_per_bndl_max);
@@ -2509,7 +2509,7 @@ static void htc_setup_msg_bndl(struct htc_target *target)
target->max_tx_bndl_sz = min(HIF_MBOX0_EXT_WIDTH,
target->max_xfer_szper_scatreq);
- ath6kl_dbg(ATH6KL_DBG_HTC, "htc max_rx_bndl_sz %d max_tx_bndl_sz %d\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "htc max_rx_bndl_sz %d max_tx_bndl_sz %d\n",
target->max_rx_bndl_sz, target->max_tx_bndl_sz);
if (target->max_tx_bndl_sz)
@@ -2563,7 +2563,7 @@ int ath6kl_htc_wait_target(struct htc_target *target)
target->tgt_creds = le16_to_cpu(rdy_msg->ver2_0_info.cred_cnt);
target->tgt_cred_sz = le16_to_cpu(rdy_msg->ver2_0_info.cred_sz);
- ath6kl_dbg(ATH6KL_DBG_HTC,
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
"htc target ready credits %d size %d\n",
target->tgt_creds, target->tgt_cred_sz);
@@ -2578,7 +2578,7 @@ int ath6kl_htc_wait_target(struct htc_target *target)
target->msg_per_bndl_max = 0;
}
- ath6kl_dbg(ATH6KL_DBG_HTC, "htc using protocol %s (%d)\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "htc using protocol %s (%d)\n",
(target->htc_tgt_ver == HTC_VERSION_2P0) ? "2.0" : ">= 2.1",
target->htc_tgt_ver);
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 58e31f6..b7bbe56 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -471,6 +471,8 @@ static int ath6kl_sdio_power_on(struct ath6kl_sdio *ar_sdio)
if (!ar_sdio->is_disabled)
return 0;
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power on\n");
+
sdio_claim_host(func);
ret = sdio_enable_func(func);
@@ -500,6 +502,8 @@ static int ath6kl_sdio_power_off(struct ath6kl_sdio *ar_sdio)
if (ar_sdio->is_disabled)
return 0;
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "sdio power off\n");
+
/* Disable the card */
sdio_claim_host(ar_sdio->func);
ret = sdio_disable_func(ar_sdio->func);
@@ -678,8 +682,8 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
MAX_SCATTER_REQUESTS, virt_scat);
if (!ret) {
- ath6kl_dbg(ATH6KL_DBG_SCATTER,
- "hif-scatter enabled: max scatter req : %d entries: %d\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
+ "hif-scatter enabled requests %d entries %d\n",
MAX_SCATTER_REQUESTS,
MAX_SCATTER_ENTRIES_PER_REQ);
@@ -703,8 +707,8 @@ static int ath6kl_sdio_enable_scatter(struct ath6kl *ar)
return ret;
}
- ath6kl_dbg(ATH6KL_DBG_SCATTER,
- "Vitual scatter enabled, max_scat_req:%d, entries:%d\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
+ "virtual scatter enabled requests %d entries %d\n",
ATH6KL_SCATTER_REQS, ATH6KL_SCATTER_ENTRIES_PER_REQ);
target->max_scat_entries = ATH6KL_SCATTER_ENTRIES_PER_REQ;
@@ -778,8 +782,8 @@ static int ath6kl_sdio_probe(struct sdio_func *func,
struct ath6kl *ar;
int count;
- ath6kl_dbg(ATH6KL_DBG_SDIO,
- "new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
+ "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
func->num, func->vendor, func->device,
func->max_blksize, func->cur_blksize);
@@ -840,7 +844,7 @@ static int ath6kl_sdio_probe(struct sdio_func *func,
goto err_cfg80211;
}
- ath6kl_dbg(ATH6KL_DBG_SDIO, "4-bit async irq mode enabled\n");
+ ath6kl_dbg(ATH6KL_DBG_BOOT, "4-bit async irq mode enabled\n");
}
/* give us some time to enable, in ms */
@@ -888,8 +892,8 @@ static void ath6kl_sdio_remove(struct sdio_func *func)
{
struct ath6kl_sdio *ar_sdio;
- ath6kl_dbg(ATH6KL_DBG_SDIO,
- "removed func %d vendor 0x%x device 0x%x\n",
+ ath6kl_dbg(ATH6KL_DBG_BOOT,
+ "sdio removed func %d vendor 0x%x device 0x%x\n",
func->num, func->vendor, func->device);
ar_sdio = sdio_get_drvdata(func);
next prev parent reply other threads:[~2011-10-24 9:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-24 9:16 [PATCH 1/9] ath6kl: remove unused A_CACHE_LINE_PAD Kalle Valo
2011-10-24 9:16 ` [PATCH 2/9] ath6kl: use ath6kl prefix in credit functions Kalle Valo
2011-10-24 9:17 ` [PATCH 3/9] ath6kl: rename struct htc_endpoint_credit_dist.htc_rsvd to htc_ep Kalle Valo
2011-10-24 9:17 ` [PATCH 4/9] ath6kl: rename struct htc_credit_state_info to ath6kl_htc_credit_info Kalle Valo
2011-10-24 9:17 ` [PATCH 5/9] ath6kl: move all credit distribution code to htc.c Kalle Valo
2011-10-24 9:17 ` [PATCH 6/9] ath6kl: use ath6kl_credit prefix consistently Kalle Valo
2011-10-24 9:17 ` [PATCH 7/9] ath6kl: remove unused debug levels Kalle Valo
2011-10-24 9:17 ` [PATCH 8/9] ath6kl: add debug messages for credit handling Kalle Valo
2011-10-24 9:18 ` Kalle Valo [this message]
2011-10-26 8:33 ` [PATCH 1/9] ath6kl: remove unused A_CACHE_LINE_PAD Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111024091807.5004.7813.stgit@localhost6.localdomain6 \
--to=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).