[PATCH] ath9k: Advertise support for TDLS

[Jouni Malinen <jouni@qca.qualcomm.com>]

Based on a quick test, TDLS seemed to be working fine with ath9k, so
let's start advertising support for this in the driver.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath9k/init.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

Since some rate control algorithms don't really like the idea of a STA
entry with no supported rates, it would be a good idea to make sure that
this gets applied only after a fix for that from Arik goes in:
mac80211: init rate-control for TDLS sta when supp-rates are known


diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index af1b325..c91d464 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -694,6 +694,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
 
 	hw->queues = 4;
 	hw->max_rates = 4;
-- 
1.7.4.1


-- 
Jouni Malinen                                            PGP id EFC895FA