[PATCH] ath6kl: Fix connect command to clear previously used IEs

[Jouni Malinen <jouni@qca.qualcomm.com>]

Empty IE buffer means that the new association is not supposed to
include extra IEs. Make sure any previously configured (Re)Association
Request frame IEs get cleared in such a case. This is based on a patch
from Shuibing.

Cc: Dai Shuibing <shuibing@qca.qualcomm.com>
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 6c59a21..ac764c1 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -461,13 +461,13 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 		}
 	}
 
-	if (sme->ie && (sme->ie_len > 0)) {
-		status = ath6kl_set_assoc_req_ies(vif, sme->ie, sme->ie_len);
-		if (status) {
-			up(&ar->sem);
-			return status;
-		}
-	} else
+	status = ath6kl_set_assoc_req_ies(vif, sme->ie, sme->ie_len);
+	if (status) {
+		up(&ar->sem);
+		return status;
+	}
+
+	if (sme->ie == NULL || sme->ie_len == 0)
 		ar->connect_ctrl_flags &= ~CONNECT_WPS_FLAG;
 
 	if (test_bit(CONNECTED, &vif->flags) &&
-- 
1.7.4.1


-- 
Jouni Malinen                                            PGP id EFC895FA