From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 6/8] mac80211: implement sta_add/sta_remove in sta_state
Date: Thu, 05 Jan 2012 16:30:49 +0100 [thread overview]
Message-ID: <20120105153229.027613982@sipsolutions.net> (raw)
In-Reply-To: 20120105153043.568616380@sipsolutions.net
From: Johannes Berg <johannes.berg@intel.com>
Instead of maintaining separate sta_add/sta_remove
callsites, implement it in sta_state when the driver
has no sta_state implementation.
The only behavioural change this should cause is in
secure mesh mode: with this the station entries will
only be created after the stations are set to AUTH.
Given which drivers support mesh, this seems to not
be a problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/driver-ops.h | 11 ++++++++++-
net/mac80211/pm.c | 2 --
net/mac80211/sta_info.c | 23 +++++++++--------------
net/mac80211/util.c | 2 --
4 files changed, 19 insertions(+), 19 deletions(-)
--- a/net/mac80211/sta_info.c 2012-01-05 16:22:36.000000000 +0100
+++ b/net/mac80211/sta_info.c 2012-01-05 16:29:46.000000000 +0100
@@ -367,7 +367,12 @@ static int sta_info_insert_drv_state(str
}
if (!err) {
- sta->uploaded = true;
+ /*
+ * Drivers using legacy sta_add/sta_remove callbacks only
+ * get uploaded set to true after sta_add is called.
+ */
+ if (!local->ops->sta_add)
+ sta->uploaded = true;
return 0;
}
@@ -419,18 +424,9 @@ static int sta_info_insert_finish(struct
if (!sta->dummy || dummy_reinsert) {
/* notify driver */
- err = drv_sta_add(local, sdata, &sta->sta);
- if (err) {
- if (sdata->vif.type != NL80211_IFTYPE_ADHOC)
- goto out_err;
- printk(KERN_DEBUG "%s: failed to add IBSS STA %pM to "
- "driver (%d) - keeping it anyway.\n",
- sdata->name, sta->sta.addr, err);
- } else {
- err = sta_info_insert_drv_state(local, sdata, sta);
- if (err)
- goto out_err;
- }
+ err = sta_info_insert_drv_state(local, sdata, sta);
+ if (err)
+ goto out_err;
}
if (!dummy_reinsert) {
@@ -812,7 +808,6 @@ int __must_check __sta_info_destroy(stru
}
if (sta->uploaded) {
- drv_sta_remove(local, sdata, &sta->sta);
ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE,
IEEE80211_STA_NOTEXIST);
WARN_ON_ONCE(ret != 0);
--- a/net/mac80211/util.c 2012-01-05 16:09:23.000000000 +0100
+++ b/net/mac80211/util.c 2012-01-05 16:29:46.000000000 +0100
@@ -1188,8 +1188,6 @@ int ieee80211_reconfig(struct ieee80211_
if (sta->uploaded) {
enum ieee80211_sta_state state;
- WARN_ON(drv_sta_add(local, sta->sdata, &sta->sta));
-
for (state = IEEE80211_STA_NOTEXIST;
state < sta->sta_state - 1; state++)
WARN_ON(drv_sta_state(local, sta->sdata, sta,
--- a/net/mac80211/pm.c 2012-01-05 16:09:23.000000000 +0100
+++ b/net/mac80211/pm.c 2012-01-05 16:29:46.000000000 +0100
@@ -100,8 +100,6 @@ int __ieee80211_suspend(struct ieee80211
if (sta->uploaded) {
enum ieee80211_sta_state state;
- drv_sta_remove(local, sta->sdata, &sta->sta);
-
state = sta->sta_state;
for (; state > IEEE80211_STA_NOTEXIST; state--)
WARN_ON(drv_sta_state(local, sdata, sta,
--- a/net/mac80211/driver-ops.h 2012-01-05 16:09:23.000000000 +0100
+++ b/net/mac80211/driver-ops.h 2012-01-05 16:29:46.000000000 +0100
@@ -493,9 +493,18 @@ int drv_sta_state(struct ieee80211_local
check_sdata_in_driver(sdata);
trace_drv_sta_state(local, sdata, &sta->sta, old_state, new_state);
- if (local->ops->sta_state)
+ if (local->ops->sta_state) {
ret = local->ops->sta_state(&local->hw, &sdata->vif, &sta->sta,
old_state, new_state);
+ } else if (old_state == IEEE80211_STA_AUTH &&
+ new_state == IEEE80211_STA_ASSOC) {
+ ret = drv_sta_add(local, sdata, &sta->sta);
+ if (ret == 0)
+ sta->uploaded = true;
+ } else if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTH) {
+ drv_sta_remove(local, sdata, &sta->sta);
+ }
trace_drv_return_int(local, ret);
return ret;
}
next prev parent reply other threads:[~2012-01-05 15:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-05 15:30 [PATCH 0/8] more station handling refactoring Johannes Berg
2012-01-05 15:30 ` [PATCH 1/8] mac80211: move managed mode station state modification Johannes Berg
2012-01-05 15:30 ` [PATCH 2/8] mac80211: simplify AP_VLAN handling Johannes Berg
2012-01-05 15:30 ` [PATCH 3/8] mac80211: dont program keys for stations not uploaded Johannes Berg
2012-01-05 15:30 ` [PATCH 4/8] mac80211: add NOTEXIST station state Johannes Berg
2012-01-05 15:30 ` [PATCH 5/8] mac80211: add sta_state callback Johannes Berg
2012-01-05 15:30 ` Johannes Berg [this message]
2012-01-05 15:30 ` [PATCH 7/8] mac80211: call rate control only after init Johannes Berg
2012-01-05 15:30 ` [PATCH 8/8] mac80211: remove dummy STA support Johannes Berg
2012-01-12 8:25 ` [PATCH 0/8] more station handling refactoring Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120105153229.027613982@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).