(no subject)

[Laurent Bonnans]

Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
some APs on my laptop with an AR9285 Wireless card.

dhcp works fine on an open wifi network but receives no response on a
wep network I use. I haven't been able to test it on a third network
for now.
Reverting to 3.2.1 solved the issue which is still there in the latest
git revision as of today.

DHCPDISCOVER requests are still sent but no ACK is received (nothing
in Wireshark).

dhcp failure may be one particular instance of the problem but I
haven't been able to connect with a static ip (my ap doesn't like it)
so this is the
only result I know.


ver_linux output (latest git kernel) :

Linux litbox 3.3.0-rc1-hack-00383-g0a96265 #1 SMP PREEMPT Mon Jan 30
02:22:54 CET 2012 x86_64 Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz
GenuineIntel GNU/Linux

Gnu C                  4.6.2
Gnu make               3.82
binutils               2.22.0.20111227
util-linux             2.20.1
mount                  support
module-init-tools      4
e2fsprogs              1.42
jfsutils               1.1.15
reiserfsprogs          3.6.21
xfsprogs               3.1.7
pcmciautils            018
PPP                    2.4.5
Linux C Library        2.15
Dynamic linker (ldd)   2.15
Linux C++ Library      so.6.0
Procps                 3.2.8
Net-tools              1.60
Kbd                    1.15.3
Sh-utils               8.15
wireless-tools         29
Modules Loaded         ipv6 cpufreq_ondemand fuse xts gf128mul
uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev
v4l2_compat_ioctl32 media arc4 ath9k ath9k_common ath9k_hw nouveau
ehci_hcd usbcore i915 snd_hda_codec_hdmi snd_hda_codec_realtek joydev
ath ttm intel_ips mac80211 cfg80211 asus_laptop sparse_keymap rfkill
drm_kms_helper drm snd_hda_intel snd_hda_codec snd_hwdep mxm_wmi
psmouse i2c_algo_bit serio_raw i2c_core pcspkr input_polldev mei
iTCO_wdt usb_common evdev intel_agp iTCO_vendor_support intel_gtt
atl1c wmi video snd_pcm snd_page_alloc snd_timer snd soundcore thermal
battery ac button tun kvm_intel kvm aes_x86_64 aes_generic
acpi_cpufreq mperf processor freq_table ext4 crc16 jbd2 mbcache
dm_crypt dm_mod sd_mod ahci libahci libata scsi_mod

Re:

[Mohammed Shafi]

[-- Attachment #1: Type: text/plain, Size: 2813 bytes --]

On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
> some APs on my laptop with an AR9285 Wireless card.
>
> dhcp works fine on an open wifi network but receives no response on a
> wep network I use. I haven't been able to test it on a third network
> for now.

 reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
helps.  i  need to analyze
if it exposes some real issue which need to be fixed.


> Reverting to 3.2.1 solved the issue which is still there in the latest
> git revision as of today.
>
> DHCPDISCOVER requests are still sent but no ACK is received (nothing
> in Wireshark).
>
> dhcp failure may be one particular instance of the problem but I
> haven't been able to connect with a static ip (my ap doesn't like it)
> so this is the
> only result I know.
>
>
> ver_linux output (latest git kernel) :
>
> Linux litbox 3.3.0-rc1-hack-00383-g0a96265 #1 SMP PREEMPT Mon Jan 30
> 02:22:54 CET 2012 x86_64 Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz
> GenuineIntel GNU/Linux
>
> Gnu C                  4.6.2
> Gnu make               3.82
> binutils               2.22.0.20111227
> util-linux             2.20.1
> mount                  support
> module-init-tools      4
> e2fsprogs              1.42
> jfsutils               1.1.15
> reiserfsprogs          3.6.21
> xfsprogs               3.1.7
> pcmciautils            018
> PPP                    2.4.5
> Linux C Library        2.15
> Dynamic linker (ldd)   2.15
> Linux C++ Library      so.6.0
> Procps                 3.2.8
> Net-tools              1.60
> Kbd                    1.15.3
> Sh-utils               8.15
> wireless-tools         29
> Modules Loaded         ipv6 cpufreq_ondemand fuse xts gf128mul
> uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev
> v4l2_compat_ioctl32 media arc4 ath9k ath9k_common ath9k_hw nouveau
> ehci_hcd usbcore i915 snd_hda_codec_hdmi snd_hda_codec_realtek joydev
> ath ttm intel_ips mac80211 cfg80211 asus_laptop sparse_keymap rfkill
> drm_kms_helper drm snd_hda_intel snd_hda_codec snd_hwdep mxm_wmi
> psmouse i2c_algo_bit serio_raw i2c_core pcspkr input_polldev mei
> iTCO_wdt usb_common evdev intel_agp iTCO_vendor_support intel_gtt
> atl1c wmi video snd_pcm snd_page_alloc snd_timer snd soundcore thermal
> battery ac button tun kvm_intel kvm aes_x86_64 aes_generic
> acpi_cpufreq mperf processor freq_table ext4 crc16 jbd2 mbcache
> dm_crypt dm_mod sd_mod ahci libahci libata scsi_mod
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
shafi

[-- Attachment #2: 0001-Revert-ath9k_hw-fix-interpretation-of-the-rx-KeyMiss.patch --]
[-- Type: text/x-diff, Size: 1813 bytes --]

From 171ef4d092d47bf63b33b1e4d5eafd4320e6bb1d Mon Sep 17 00:00:00 2001
From: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Date: Tue, 31 Jan 2012 10:36:47 +0530
Subject: [PATCH] Revert "ath9k_hw: fix interpretation of the rx KeyMiss flag"

This reverts commit 7a532fe7131216a02c81a6c1b1f8632da1195a58.
---
 drivers/net/wireless/ath/ath9k/ar9003_mac.c |    5 ++---
 drivers/net/wireless/ath/ath9k/mac.c        |    5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 09b8c9d..88c81c5 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -557,11 +557,10 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
 			rxs->rs_status |= ATH9K_RXERR_DECRYPT;
 		else if (rxsp->status11 & AR_MichaelErr)
 			rxs->rs_status |= ATH9K_RXERR_MIC;
+		if (rxsp->status11 & AR_KeyMiss)
+			rxs->rs_status |= ATH9K_RXERR_KEYMISS;
 	}
 
-	if (rxsp->status11 & AR_KeyMiss)
-		rxs->rs_status |= ATH9K_RXERR_KEYMISS;
-
 	return 0;
 }
 EXPORT_SYMBOL(ath9k_hw_process_rxdesc_edma);
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index e196aba..fd3f19c 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -618,11 +618,10 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 			rs->rs_status |= ATH9K_RXERR_DECRYPT;
 		else if (ads.ds_rxstatus8 & AR_MichaelErr)
 			rs->rs_status |= ATH9K_RXERR_MIC;
+		if (ads.ds_rxstatus8 & AR_KeyMiss)
+			rs->rs_status |= ATH9K_RXERR_KEYMISS;
 	}
 
-	if (ads.ds_rxstatus8 & AR_KeyMiss)
-		rs->rs_status |= ATH9K_RXERR_KEYMISS;
-
 	return 0;
 }
 EXPORT_SYMBOL(ath9k_hw_rxprocdesc);
-- 
1.7.0.4

Re:

[Mohammed Shafi]

On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
<shafi.wireless@gmail.com> wrote:
> On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>> some APs on my laptop with an AR9285 Wireless card.
>>
>> dhcp works fine on an open wifi network but receives no response on a
>> wep network I use. I haven't been able to test it on a third network
>> for now.
>
>  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
> helps.  i  need to analyze
> if it exposes some real issue which need to be fixed.
>

this seems to be a problem in WEP alone, where the key miss is always
set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
decrypt,  but fails due to ICV mismatch.

-- 
shafi

Re:

[John W. Linville]

On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
> <shafi.wireless@gmail.com> wrote:
> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
> >> some APs on my laptop with an AR9285 Wireless card.
> >>
> >> dhcp works fine on an open wifi network but receives no response on a
> >> wep network I use. I haven't been able to test it on a third network
> >> for now.
> >
> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
> > helps.  i  need to analyze
> > if it exposes some real issue which need to be fixed.
> >
> 
> this seems to be a problem in WEP alone, where the key miss is always
> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
> decrypt,  but fails due to ICV mismatch.

OK...any way to differentiate this case at that point in the code?

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re:

[Felix Fietkau]

On 2012-02-01 5:27 PM, John W. Linville wrote:
> On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
>> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
>> <shafi.wireless@gmail.com> wrote:
>> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>> >> some APs on my laptop with an AR9285 Wireless card.
>> >>
>> >> dhcp works fine on an open wifi network but receives no response on a
>> >> wep network I use. I haven't been able to test it on a third network
>> >> for now.
>> >
>> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
>> > helps.  i  need to analyze
>> > if it exposes some real issue which need to be fixed.
>> >
>> 
>> this seems to be a problem in WEP alone, where the key miss is always
>> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
>> decrypt,  but fails due to ICV mismatch.
> 
> OK...any way to differentiate this case at that point in the code?
> 
> John
Please try this patch:

---
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -823,6 +823,15 @@ static bool ath9k_rx_accept(struct ath_c
 		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
 		 ATH9K_RXERR_KEYMISS));
 
+	/*
+	 * First 4 slots are reserved for WEP, and for packets using them,
+	 * ATH9K_RXERR_KEYMISS can be reported even though decryption was
+	 * successful, since no MAC address based key cache lookup was
+	 * performed.
+	 */
+	if (rx_stats->rs_keyix < 4)
+		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
 	if (!rx_stats->rs_datalen)
 		return false;
         /*

Re:

[Mohammed Shafi]

Hi Felix,

On Wed, Feb 1, 2012 at 10:34 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2012-02-01 5:27 PM, John W. Linville wrote:
>> On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
>>> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
>>> <shafi.wireless@gmail.com> wrote:
>>> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>>> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>>> >> some APs on my laptop with an AR9285 Wireless card.
>>> >>
>>> >> dhcp works fine on an open wifi network but receives no response on a
>>> >> wep network I use. I haven't been able to test it on a third network
>>> >> for now.
>>> >
>>> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
>>> > helps.  i  need to analyze
>>> > if it exposes some real issue which need to be fixed.
>>> >
>>>
>>> this seems to be a problem in WEP alone, where the key miss is always
>>> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
>>> decrypt,  but fails due to ICV mismatch.
>>
>> OK...any way to differentiate this case at that point in the code?
>>
>> John
> Please try this patch:
>
> ---
> --- a/drivers/net/wireless/ath/ath9k/recv.c
> +++ b/drivers/net/wireless/ath/ath9k/recv.c
> @@ -823,6 +823,15 @@ static bool ath9k_rx_accept(struct ath_c
>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>                 ATH9K_RXERR_KEYMISS));
>
> +       /*
> +        * First 4 slots are reserved for WEP, and for packets using them,
> +        * ATH9K_RXERR_KEYMISS can be reported even though decryption was
> +        * successful, since no MAC address based key cache lookup was
> +        * performed.
> +        */
> +       if (rx_stats->rs_keyix < 4)
> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
> +
>        if (!rx_stats->rs_datalen)
>                return false;
>         /*


unfortunately as the rx_keyix is always 'INVALID' (as obtained from
the descriptor) this check does not seems to help

-- 
shafi

Re:

[Felix Fietkau]

On 2012-02-02 6:37 AM, Mohammed Shafi wrote:
> Hi Felix,
> 
> On Wed, Feb 1, 2012 at 10:34 PM, Felix Fietkau <nbd@openwrt.org> wrote:
>> On 2012-02-01 5:27 PM, John W. Linville wrote:
>>> On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
>>>> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
>>>> <shafi.wireless@gmail.com> wrote:
>>>> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>>>> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>>>> >> some APs on my laptop with an AR9285 Wireless card.
>>>> >>
>>>> >> dhcp works fine on an open wifi network but receives no response on a
>>>> >> wep network I use. I haven't been able to test it on a third network
>>>> >> for now.
>>>> >
>>>> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
>>>> > helps.  i  need to analyze
>>>> > if it exposes some real issue which need to be fixed.
>>>> >
>>>>
>>>> this seems to be a problem in WEP alone, where the key miss is always
>>>> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
>>>> decrypt,  but fails due to ICV mismatch.
>>>
>>> OK...any way to differentiate this case at that point in the code?
>>>
>>> John
>> Please try this patch:
>>
>> ---
>> --- a/drivers/net/wireless/ath/ath9k/recv.c
>> +++ b/drivers/net/wireless/ath/ath9k/recv.c
>> @@ -823,6 +823,15 @@ static bool ath9k_rx_accept(struct ath_c
>>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>>                 ATH9K_RXERR_KEYMISS));
>>
>> +       /*
>> +        * First 4 slots are reserved for WEP, and for packets using them,
>> +        * ATH9K_RXERR_KEYMISS can be reported even though decryption was
>> +        * successful, since no MAC address based key cache lookup was
>> +        * performed.
>> +        */
>> +       if (rx_stats->rs_keyix < 4)
>> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
>> +
>>        if (!rx_stats->rs_datalen)
>>                return false;
>>         /*
> 
> 
> unfortunately as the rx_keyix is always 'INVALID' (as obtained from
> the descriptor) this check does not seems to help
You're right. I read up on what the other codebases do here, and I have
a better patch here:

--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -823,6 +823,14 @@ static bool ath9k_rx_accept(struct ath_c
 		(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
 		 ATH9K_RXERR_KEYMISS));
 
+	/*
+	 * Key miss events are only relevant for pairwise keys where the
+	 * descriptor does contain a valid key index. This has been observed
+	 * mostly with CCMP encryption.
+	 */
+	if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+		rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
+
 	if (!rx_stats->rs_datalen)
 		return false;
         /*

Re:

[Mohammed Shafi]

On Thu, Feb 2, 2012 at 5:58 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2012-02-02 6:37 AM, Mohammed Shafi wrote:
>> Hi Felix,
>>
>> On Wed, Feb 1, 2012 at 10:34 PM, Felix Fietkau <nbd@openwrt.org> wrote:
>>> On 2012-02-01 5:27 PM, John W. Linville wrote:
>>>> On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
>>>>> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
>>>>> <shafi.wireless@gmail.com> wrote:
>>>>> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>>>>> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>>>>> >> some APs on my laptop with an AR9285 Wireless card.
>>>>> >>
>>>>> >> dhcp works fine on an open wifi network but receives no response on a
>>>>> >> wep network I use. I haven't been able to test it on a third network
>>>>> >> for now.
>>>>> >
>>>>> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
>>>>> > helps.  i  need to analyze
>>>>> > if it exposes some real issue which need to be fixed.
>>>>> >
>>>>>
>>>>> this seems to be a problem in WEP alone, where the key miss is always
>>>>> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
>>>>> decrypt,  but fails due to ICV mismatch.
>>>>
>>>> OK...any way to differentiate this case at that point in the code?
>>>>
>>>> John
>>> Please try this patch:
>>>
>>> ---
>>> --- a/drivers/net/wireless/ath/ath9k/recv.c
>>> +++ b/drivers/net/wireless/ath/ath9k/recv.c
>>> @@ -823,6 +823,15 @@ static bool ath9k_rx_accept(struct ath_c
>>>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>>>                 ATH9K_RXERR_KEYMISS));
>>>
>>> +       /*
>>> +        * First 4 slots are reserved for WEP, and for packets using them,
>>> +        * ATH9K_RXERR_KEYMISS can be reported even though decryption was
>>> +        * successful, since no MAC address based key cache lookup was
>>> +        * performed.
>>> +        */
>>> +       if (rx_stats->rs_keyix < 4)
>>> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
>>> +
>>>        if (!rx_stats->rs_datalen)
>>>                return false;
>>>         /*
>>
>>
>> unfortunately as the rx_keyix is always 'INVALID' (as obtained from
>> the descriptor) this check does not seems to help
> You're right. I read up on what the other codebases do here, and I have
> a better patch here:
>
> --- a/drivers/net/wireless/ath/ath9k/recv.c
> +++ b/drivers/net/wireless/ath/ath9k/recv.c
> @@ -823,6 +823,14 @@ static bool ath9k_rx_accept(struct ath_c
>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>                 ATH9K_RXERR_KEYMISS));
>
> +       /*
> +        * Key miss events are only relevant for pairwise keys where the
> +        * descriptor does contain a valid key index. This has been observed
> +        * mostly with CCMP encryption.
> +        */
> +       if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
> +
>        if (!rx_stats->rs_datalen)
>                return false;
>         /*
>

this works for me (WEP key configured).

-- 
shafi

Re:

[Laurent Bonnans]

It works for me too.

On Thu, Feb 2, 2012 at 1:28 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2012-02-02 6:37 AM, Mohammed Shafi wrote:
>> Hi Felix,
>>
>> On Wed, Feb 1, 2012 at 10:34 PM, Felix Fietkau <nbd@openwrt.org> wrote:
>>> On 2012-02-01 5:27 PM, John W. Linville wrote:
>>>> On Wed, Feb 01, 2012 at 04:44:08PM +0530, Mohammed Shafi wrote:
>>>>> On Tue, Jan 31, 2012 at 11:28 AM, Mohammed Shafi
>>>>> <shafi.wireless@gmail.com> wrote:
>>>>> > On Tue, Jan 31, 2012 at 1:13 AM, Laurent Bonnans <bonnans.l@gmail.com> wrote:
>>>>> >> Since the update from linux 3.2.1 to 3.2.2, dhcp stopped working on
>>>>> >> some APs on my laptop with an AR9285 Wireless card.
>>>>> >>
>>>>> >> dhcp works fine on an open wifi network but receives no response on a
>>>>> >> wep network I use. I haven't been able to test it on a third network
>>>>> >> for now.
>>>>> >
>>>>> >  reverting  "ath9k_hw: fix interpretation of the rx KeyMiss flag" does
>>>>> > helps.  i  need to analyze
>>>>> > if it exposes some real issue which need to be fixed.
>>>>> >
>>>>>
>>>>> this seems to be a problem in WEP alone, where the key miss is always
>>>>> set for this case and RX_FLAG_DECRYPTED is not set. mac80211 trys to
>>>>> decrypt,  but fails due to ICV mismatch.
>>>>
>>>> OK...any way to differentiate this case at that point in the code?
>>>>
>>>> John
>>> Please try this patch:
>>>
>>> ---
>>> --- a/drivers/net/wireless/ath/ath9k/recv.c
>>> +++ b/drivers/net/wireless/ath/ath9k/recv.c
>>> @@ -823,6 +823,15 @@ static bool ath9k_rx_accept(struct ath_c
>>>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>>>                 ATH9K_RXERR_KEYMISS));
>>>
>>> +       /*
>>> +        * First 4 slots are reserved for WEP, and for packets using them,
>>> +        * ATH9K_RXERR_KEYMISS can be reported even though decryption was
>>> +        * successful, since no MAC address based key cache lookup was
>>> +        * performed.
>>> +        */
>>> +       if (rx_stats->rs_keyix < 4)
>>> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
>>> +
>>>        if (!rx_stats->rs_datalen)
>>>                return false;
>>>         /*
>>
>>
>> unfortunately as the rx_keyix is always 'INVALID' (as obtained from
>> the descriptor) this check does not seems to help
> You're right. I read up on what the other codebases do here, and I have
> a better patch here:
>
> --- a/drivers/net/wireless/ath/ath9k/recv.c
> +++ b/drivers/net/wireless/ath/ath9k/recv.c
> @@ -823,6 +823,14 @@ static bool ath9k_rx_accept(struct ath_c
>                (ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
>                 ATH9K_RXERR_KEYMISS));
>
> +       /*
> +        * Key miss events are only relevant for pairwise keys where the
> +        * descriptor does contain a valid key index. This has been observed
> +        * mostly with CCMP encryption.
> +        */
> +       if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
> +               rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
> +
>        if (!rx_stats->rs_datalen)
>                return false;
>         /*
>

(no subject)

[Rajat Jain]

From: Wei-Ning Huang <wnhuang@google.com>

Date: Thu, 17 Mar 2016 11:43:16 +0800
Subject: [PATCH] mwifiex: report wakeup for wowlan

Enable notifying wakeup source to the PM core. This allow darkresume to
correctly track wakeup source and mark mwifiex_plt as 'automatic' wakeup
source.

Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Signed-off-by: Rajat Jain <rajatja@google.com>
Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Eric Caruso <ejcaruso@chromium.org>
---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 8 ++++++++
 drivers/net/wireless/marvell/mwifiex/sdio.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index d3e1561..a5f63e4 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -89,6 +89,9 @@ static irqreturn_t mwifiex_wake_irq_wifi(int irq, void *priv)
 		disable_irq_nosync(irq);
 	}
 
+	/* Notify PM core we are wakeup source */
+	pm_wakeup_event(cfg->dev, 0);
+
 	return IRQ_HANDLED;
 }
 
@@ -112,6 +115,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
 					  GFP_KERNEL);
 	cfg = card->plt_wake_cfg;
 	if (cfg && card->plt_of_node) {
+		cfg->dev = dev;
 		cfg->irq_wifi = irq_of_parse_and_map(card->plt_of_node, 0);
 		if (!cfg->irq_wifi) {
 			dev_dbg(dev,
@@ -130,6 +134,10 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
 		}
 	}
 
+	ret = device_init_wakeup(dev, true);
+	if (ret)
+		dev_err(dev, "fail to init wakeup for mwifiex");
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index db837f1..07cdd23 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -155,6 +155,7 @@
 } while (0)
 
 struct mwifiex_plt_wake_cfg {
+	struct device *dev;
 	int irq_wifi;
 	bool wake_by_wifi;
 };
-- 
2.8.0.rc3.226.g39d4020

Re:

[Rajat Jain]

Please ignore, not sure why this landed without a subject.

On Tue, Sep 27, 2016 at 9:50 AM, Rajat Jain <rajatja@google.com> wrote:
> From: Wei-Ning Huang <wnhuang@google.com>
>
> Date: Thu, 17 Mar 2016 11:43:16 +0800
> Subject: [PATCH] mwifiex: report wakeup for wowlan
>
> Enable notifying wakeup source to the PM core. This allow darkresume to
> correctly track wakeup source and mark mwifiex_plt as 'automatic' wakeup
> source.
>
> Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
> Signed-off-by: Rajat Jain <rajatja@google.com>
> Tested-by: Wei-Ning Huang <wnhuang@chromium.org>
> Reviewed-by: Eric Caruso <ejcaruso@chromium.org>
> ---
>  drivers/net/wireless/marvell/mwifiex/sdio.c | 8 ++++++++
>  drivers/net/wireless/marvell/mwifiex/sdio.h | 1 +
>  2 files changed, 9 insertions(+)
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
> index d3e1561..a5f63e4 100644
> --- a/drivers/net/wireless/marvell/mwifiex/sdio.c
> +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
> @@ -89,6 +89,9 @@ static irqreturn_t mwifiex_wake_irq_wifi(int irq, void *priv)
>                 disable_irq_nosync(irq);
>         }
>
> +       /* Notify PM core we are wakeup source */
> +       pm_wakeup_event(cfg->dev, 0);
> +
>         return IRQ_HANDLED;
>  }
>
> @@ -112,6 +115,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
>                                           GFP_KERNEL);
>         cfg = card->plt_wake_cfg;
>         if (cfg && card->plt_of_node) {
> +               cfg->dev = dev;
>                 cfg->irq_wifi = irq_of_parse_and_map(card->plt_of_node, 0);
>                 if (!cfg->irq_wifi) {
>                         dev_dbg(dev,
> @@ -130,6 +134,10 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
>                 }
>         }
>
> +       ret = device_init_wakeup(dev, true);
> +       if (ret)
> +               dev_err(dev, "fail to init wakeup for mwifiex");
> +
>         return 0;
>  }
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
> index db837f1..07cdd23 100644
> --- a/drivers/net/wireless/marvell/mwifiex/sdio.h
> +++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
> @@ -155,6 +155,7 @@
>  } while (0)
>
>  struct mwifiex_plt_wake_cfg {
> +       struct device *dev;
>         int irq_wifi;
>         bool wake_by_wifi;
>  };
> --
> 2.8.0.rc3.226.g39d4020
>

Re:

[Sam Leffler]

unsubscribe linux-wireless

"brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10

[Sébastien Bourdeauducq]

[-- Attachment #1: Type: text/plain, Size: 662 bytes --]

Hi,

The Lenovo Thinkpad Tablet 10 is a complete disaster under Linux, and
among many problems the SDIO brcmfmac wifi does not work.

I get the following messages in the kernel log:
brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done
for chip 4324 rev 6 pmurev 17
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[repeated]

and the network interface is never created.

I'm running kernel 3.18.4, my brcmfmac43241b4-sdio.bin is identical to
the one in the linux-firmware repository, and I have attached the
brcmfmac43241b4-sdio.txt that I have extracted from the EFI variables.

Any help would be appreciated.

Sébastien

[-- Attachment #2: brcmfmac43241b4-sdio.txt --]
[-- Type: text/plain, Size: 2550 bytes --]

#---------------------------------------------------------------------------------------------------------------------
# NVRAM file for BCM4324 with 2.4G and 5G external PAs..
# Release Version: fox77h506nvram-Ella-WorldWide-v02
#---------------------------------------------------------------------------------------------------------------------
devid=0x4374
boardtype=0x67e
boardrev=0x1301
boardflags=0x90001200
boardflags2=0
macaddr=00:90:4c:c5:12:38
sromrev=9
xtalfreq=37400
nocrc=1
ag0=0x2
ag1=0x2
ag2=0xff
ag3=0xff
txchain=0x3
rxchain=0x3
aa2g=3
aa5g=3
ccode=XT
regrev=31
ledbh0=0xff
ledbh1=0xff
ledbh2=0xff
ledbh3=0xff
leddc=0xffff
#MP Original board PA parameters:
pa2gw0a0=0xffa7
pa2gw1a0=0x1563
pa2gw2a0=0xfeb9
#MP Original board PA parameters:
pa2gw0a1=0xff9c
pa2gw1a1=0x135e
pa2gw2a1=0xfebf
maxp2ga0=80
maxp2ga1=80
maxp5ga0=76
maxp5ga1=76
maxp5gha0=76
maxp5gha1=76
maxp5gla0=76
maxp5gla1=76
pa0itssit=62
pa1itssit=62
antswctl2g=30
antswctl5g=30
antswitch=0x0
subband5gver=0
pa5gw0a0=0xffa1
pa5gw1a0=0x114d
pa5gw2a0=0xfebf
pa5gw0a1=0xffca
pa5gw1a1=0x11aa
pa5gw2a1=0xfeee
pa5glw0a0=0xffb3
pa5glw1a0=0x1080
pa5glw2a0=0xfed4
pa5glw0a1=0xffd4
pa5glw1a1=0x10aa
pa5glw2a1=0xff01
pa5ghw0a0=0xffaf
pa5ghw1a0=0x116f
pa5ghw2a0=0xfee6
pa5ghw0a1=0xff9c
pa5ghw1a1=0x10f3
pa5ghw2a1=0xfed4
extpagain2g=3
extpagain5g=3
pdetrange2g=2
pdetrange5g=2
triso2g=3
triso5g=1
elna2g=1
elnabypass2g=-8
elna5g=1
elnabypass5g=-8
tssipos2g=1
tssipos5g=1
cckbw202gpo=0x6666
cckbw20ul2gpo=0x6666
legofdmbw202gpo=0x55533333
legofdmbw20ul2gpo=0x55533333
mcsbw202gpo=0x66655555
mcsbw20ul2gpo=0x66655555
mcsbw402gpo=0x66655555
mcs32po=0x5555
leg40dup2gpo=0x2
legofdmbw205glpo=0x22200000
legofdmbw20ul5glpo=0x44442222
legofdmbw205gmpo=0x22200000
legofdmbw20ul5gmpo=0x44442222
legofdmbw205ghpo=0x22200000
legofdmbw20ul5ghpo=0x44442222
mcsbw205glpo=0x99999999
mcsbw20ul5glpo=0x99999999
mcsbw405glpo=0x44422222
mcsbw205gmpo=0x66666666
mcsbw20ul5gmpo=0x66666666
mcsbw405gmpo=0x44422222
mcsbw205ghpo=0x66666666
mcsbw20ul5ghpo=0x66666666
mcsbw405ghpo=0x44422222
itt2ga0=0x20
itt5ga0=0x3e
itt2ga1=0x20
itt5ga1=0x3e
tempthresh=120
otpimagesize=232
usbepnum=0x2
muxenab=0x5
noisecaloffset=12
noisecaloffset5g=12
PwrOffsetcck=0x0006
PwrOffset40mhz5g=0x9
txidxcap2g=0
txidxcap5g=0
TssiAv5g=0x0
TssiVmid5g=0x9C
TssiAv2g=0x0
TssiVmid2g=0xAA
#Out-of-band GPIO Wakeup
sd_gpout=0
sd_gpval=1
sd_gpdc=0
#WiFi/BT co-existence parameter
btc_mode=5
btc_params9=15000

Re: "brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10

[Arend van Spriel]

On 01/28/15 08:15, Sébastien Bourdeauducq wrote:
> Hi,
>
> The Lenovo Thinkpad Tablet 10 is a complete disaster under Linux, and
> among many problems the SDIO brcmfmac wifi does not work.
>
> I get the following messages in the kernel log:
> brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done
> for chip 4324 rev 6 pmurev 17
> brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
> [repeated]
>
> and the network interface is never created.
>
> I'm running kernel 3.18.4, my brcmfmac43241b4-sdio.bin is identical to
> the one in the linux-firmware repository, and I have attached the
> brcmfmac43241b4-sdio.txt that I have extracted from the EFI variables.

When you say your firmware is identical what does that mean. Did you do 
a diff? Can you do 'hexdump -C brcmfmac43241b4-sdio.bin | tail -30'? I 
will be getting a laptop with 43241 integrated soonish (monday?). 
Hopefully it has same chip revision.

Regards,
Arend
> Any help would be appreciated.
>
> Sébastien

Re:

[Oleg Kostyuchenko]

Hi Arend,
I am still experiencing the issue Sebastien initially described (no wlan0 device,
"SDIO drive strength" warnings etc) on a Thinkpad Tablet 10 for the latest
kernel release, 4.2. Doesn't the 4.2 kernel include the required fix?

Thanks,
Oleg

(no subject)

[Marc Murphy]

Hello,
I have been trawling the mailings and lots of people are asking about 802.11p and I have not managed to find a definitive push back to the mainline kernel.

Is there anywhere in particular that I need to be looking to be able to get the patches so I can have a play ?

Thanks
Marc

Re:

[Sedat Dilek]

On Wed, Aug 28, 2013 at 1:07 PM, Marc Murphy <marcmltd@marcm.co.uk> wrote:
> Hello,
> I have been trawling the mailings and lots of people are asking about 802.11p and I have not managed to find a definitive push back to the mainline kernel.
>

Hi,

first of all, you should set a "subject" to your email request :-).

I cannot say much about 802.11p, but for first informations I
recommend the wiki at <http://wireless.kernel.org> and have a look
into docs section.

For faster replies you can join #linux-wireless IRC channel (Freenode).

- Sedat -

> Is there anywhere in particular that I need to be looking to be able to get the patches so I can have a play ?
>
> Thanks
> Marc--
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

(no subject)

[piuvatsa]

i am using debian 7.1 whezzy but there is a problem in the wi-fi blooth
is working but wi-fi is not showing it may be due to driver problem. I
am a Dell xps user plz help me to solve out this problem 

Re:

[Tomas Pospisek]

Am 28.07.2013 16:21, schrieb piuvatsa:
> i am using debian 7.1 whezzy but there is a problem in the wi-fi blooth
> is working but wi-fi is not showing it may be due to driver problem. I
> am a Dell xps user plz help me to solve out this problem

You may want to have a look at these:

http://catb.org/~esr/faqs/smart-questions.html#writewell
http://catb.org/~esr/faqs/smart-questions.html#beprecise

*t

(no subject)

[Jeffrey (Sheng-Hui) Chu]

>From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
From: Jeffrey Chu <jeffchu@broadcom.com>
Date: Mon, 8 Jul 2013 17:50:21 -0400
Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.

Signed-off-by: Jeffrey Chu <jeffchu@broadcom.com>
---
 drivers/nfc/Kconfig                 |    1 +
 drivers/nfc/Makefile                |    1 +
 drivers/nfc/bcm2079x/Kconfig        |   10 +
 drivers/nfc/bcm2079x/Makefile       |    4 +
 drivers/nfc/bcm2079x/bcm2079x-i2c.c |  416 +++++++++++++++++++++++++++++++++++
 drivers/nfc/bcm2079x/bcm2079x.h     |   34 +++
 6 files changed, 466 insertions(+)
 create mode 100644 drivers/nfc/bcm2079x/Kconfig
 create mode 100644 drivers/nfc/bcm2079x/Makefile
 create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
 create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h

diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 74a852e..fa540f4 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -38,5 +38,6 @@ config NFC_MEI_PHY
 
 source "drivers/nfc/pn544/Kconfig"
 source "drivers/nfc/microread/Kconfig"
+source "drivers/nfc/bcm2079x/Kconfig"
 
 endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index aa6bd65..a56adf6 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_NFC_MICROREAD)	+= microread/
 obj-$(CONFIG_NFC_PN533)		+= pn533.o
 obj-$(CONFIG_NFC_WILINK)	+= nfcwilink.o
 obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
+obj-$(CONFIG_NFC_PN544)		+= bcm2079x/
 
 ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/bcm2079x/Kconfig b/drivers/nfc/bcm2079x/Kconfig
new file mode 100644
index 0000000..889e181
--- /dev/null
+++ b/drivers/nfc/bcm2079x/Kconfig
@@ -0,0 +1,10 @@
+config NFC_BCM2079X_I2C
+	tristate "NFC BCM2079x i2c support"
+	depends on I2C
+	default n
+	---help---
+	  Broadcom BCM2079x i2c driver.
+	  This is a driver that allows transporting NCI/HCI command and response
+	  to/from Broadcom bcm2079x NFC Controller.  Select this if your
+	  platform is using i2c bus to controll this chip.
+
diff --git a/drivers/nfc/bcm2079x/Makefile b/drivers/nfc/bcm2079x/Makefile
new file mode 100644
index 0000000..be64d35
--- /dev/null
+++ b/drivers/nfc/bcm2079x/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for bcm2079x NFC driver
+#
+obj-$(CONFIG_NFC_BCM2079X_I2C) += bcm2079x-i2c.o
diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
new file mode 100644
index 0000000..988a65e
--- /dev/null
+++ b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/poll.h>
+
+#include "bcm2079x.h"
+
+/* do not change below */
+#define MAX_BUFFER_SIZE		780
+
+/* Read data */
+#define PACKET_HEADER_SIZE_NCI	(4)
+#define PACKET_HEADER_SIZE_HCI	(3)
+#define PACKET_TYPE_NCI		(16)
+#define PACKET_TYPE_HCIEV	(4)
+#define MAX_PACKET_SIZE		(PACKET_HEADER_SIZE_NCI + 255)
+
+struct bcm2079x_dev {
+	wait_queue_head_t read_wq;
+	struct mutex read_mutex;
+	struct i2c_client *client;
+	struct miscdevice bcm2079x_device;
+	unsigned int wake_gpio;
+	unsigned int en_gpio;
+	unsigned int irq_gpio;
+	bool irq_enabled;
+	spinlock_t irq_enabled_lock;
+	unsigned int count_irq;
+};
+
+static void bcm2079x_init_stat(struct bcm2079x_dev *bcm2079x_dev)
+{
+	bcm2079x_dev->count_irq = 0;
+}
+
+static void bcm2079x_disable_irq(struct bcm2079x_dev *bcm2079x_dev)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+	if (bcm2079x_dev->irq_enabled) {
+		disable_irq_nosync(bcm2079x_dev->client->irq);
+		bcm2079x_dev->irq_enabled = false;
+	}
+	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+}
+
+static void bcm2079x_enable_irq(struct bcm2079x_dev *bcm2079x_dev)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+	if (!bcm2079x_dev->irq_enabled) {
+		bcm2079x_dev->irq_enabled = true;
+		enable_irq(bcm2079x_dev->client->irq);
+	}
+	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+}
+
+static void set_client_addr(struct bcm2079x_dev *bcm2079x_dev, int addr)
+{
+	struct i2c_client *client = bcm2079x_dev->client;
+	dev_info(&client->dev,
+		"Set client device address from 0x%04X flag = "
+		"%02x, to  0x%04X\n",
+		client->addr, client->flags, addr);
+		client->addr = addr;
+		if (addr < 0x80)
+			client->flags &= ~I2C_CLIENT_TEN;
+		else
+			client->flags |= I2C_CLIENT_TEN;
+}
+
+static irqreturn_t bcm2079x_dev_irq_handler(int irq, void *dev_id)
+{
+	struct bcm2079x_dev *bcm2079x_dev = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+	bcm2079x_dev->count_irq++;
+	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+	wake_up(&bcm2079x_dev->read_wq);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int bcm2079x_dev_poll(struct file *filp, poll_table *wait)
+{
+	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+	unsigned int mask = 0;
+	unsigned long flags;
+
+	poll_wait(filp, &bcm2079x_dev->read_wq, wait);
+
+	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
+	if (bcm2079x_dev->count_irq > 0) {
+		bcm2079x_dev->count_irq--;
+		mask |= POLLIN | POLLRDNORM;
+	}
+	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
+
+	return mask;
+}
+
+static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
+					size_t count, loff_t *offset)
+{
+	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+	unsigned char tmp[MAX_BUFFER_SIZE];
+	int total, len, ret;
+
+	total = 0;
+	len = 0;
+
+	if (count > MAX_BUFFER_SIZE)
+		count = MAX_BUFFER_SIZE;
+
+	mutex_lock(&bcm2079x_dev->read_mutex);
+
+	/* Read the first 4 bytes to include the length of the NCI or
+		HCI packet.*/
+	ret = i2c_master_recv(bcm2079x_dev->client, tmp, 4);
+	if (ret == 4) {
+		total = ret;
+		/* First byte is the packet type*/
+		switch (tmp[0]) {
+		case PACKET_TYPE_NCI:
+			len = tmp[PACKET_HEADER_SIZE_NCI-1];
+			break;
+
+		case PACKET_TYPE_HCIEV:
+			len = tmp[PACKET_HEADER_SIZE_HCI-1];
+			if (len == 0)
+				total--;
+			else
+				len--;
+			break;
+
+		default:
+			len = 0;/*Unknown packet byte */
+			break;
+		} /* switch*/
+
+		/* make sure full packet fits in the buffer*/
+		if (len > 0 && (len + total) <= count) {
+			/** read the remainder of the packet.
+			**/
+			ret = i2c_master_recv(bcm2079x_dev->client, tmp+total,
+				len);
+			if (ret == len)
+				total += len;
+		} /* if */
+	} /* if */
+
+	mutex_unlock(&bcm2079x_dev->read_mutex);
+
+	if (total > count || copy_to_user(buf, tmp, total)) {
+		dev_err(&bcm2079x_dev->client->dev,
+			"failed to copy to user space, total = %d\n", total);
+		total = -EFAULT;
+	}
+
+	return total;
+}
+
+static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
+					size_t count, loff_t *offset)
+{
+	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+	char tmp[MAX_BUFFER_SIZE];
+	int ret;
+
+	if (count > MAX_BUFFER_SIZE) {
+		dev_err(&bcm2079x_dev->client->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+
+	if (copy_from_user(tmp, buf, count)) {
+		dev_err(&bcm2079x_dev->client->dev,
+			"failed to copy from user space\n");
+		return -EFAULT;
+	}
+
+	mutex_lock(&bcm2079x_dev->read_mutex);
+	/* Write data */
+
+	ret = i2c_master_send(bcm2079x_dev->client, tmp, count);
+	if (ret != count) {
+		dev_err(&bcm2079x_dev->client->dev,
+			"failed to write %d\n", ret);
+		ret = -EIO;
+	}
+	mutex_unlock(&bcm2079x_dev->read_mutex);
+
+	return ret;
+}
+
+static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
+{
+	int ret = 0;
+
+	struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
+							struct bcm2079x_dev,
+							bcm2079x_device);
+	filp->private_data = bcm2079x_dev;
+	bcm2079x_init_stat(bcm2079x_dev);
+	bcm2079x_enable_irq(bcm2079x_dev);
+	dev_info(&bcm2079x_dev->client->dev,
+		 "%d,%d\n", imajor(inode), iminor(inode));
+
+	return ret;
+}
+
+static long bcm2079x_dev_unlocked_ioctl(struct file *filp,
+					 unsigned int cmd, unsigned long arg)
+{
+	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
+
+	switch (cmd) {
+	case BCMNFC_POWER_CTL:
+		gpio_set_value(bcm2079x_dev->en_gpio, arg);
+		break;
+	case BCMNFC_WAKE_CTL:
+		gpio_set_value(bcm2079x_dev->wake_gpio, arg);
+		break;
+	case BCMNFC_SET_ADDR:
+		set_client_addr(bcm2079x_dev, arg);
+		break;
+	default:
+		dev_err(&bcm2079x_dev->client->dev,
+			"%s, unknown cmd (%x, %lx)\n", __func__, cmd, arg);
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+static const struct file_operations bcm2079x_dev_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.poll = bcm2079x_dev_poll,
+	.read = bcm2079x_dev_read,
+	.write = bcm2079x_dev_write,
+	.open = bcm2079x_dev_open,
+	.unlocked_ioctl = bcm2079x_dev_unlocked_ioctl
+};
+
+static int bcm2079x_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	int ret;
+	struct bcm2079x_platform_data *platform_data;
+	struct bcm2079x_dev *bcm2079x_dev;
+
+	platform_data = client->dev.platform_data;
+
+	dev_info(&client->dev, "%s, probing bcm2079x driver flags = %x\n",
+		__func__, client->flags);
+	if (platform_data == NULL) {
+		dev_err(&client->dev, "nfc probe fail\n");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+		return -ENODEV;
+	}
+
+	ret = gpio_request_one(platform_data->irq_gpio, GPIOF_IN, "nfc_irq");
+	if (ret)
+		return -ENODEV;
+	ret = gpio_request_one(platform_data->en_gpio, GPIOF_OUT_INIT_LOW,
+		"nfc_en");
+	if (ret)
+		goto err_en;
+	ret = gpio_request_one(platform_data->wake_gpio, GPIOF_OUT_INIT_LOW,
+		"nfc_wake");
+	if (ret)
+		goto err_wake;
+
+	gpio_set_value(platform_data->en_gpio, 0);
+	gpio_set_value(platform_data->wake_gpio, 0);
+
+	bcm2079x_dev = kzalloc(sizeof(*bcm2079x_dev), GFP_KERNEL);
+	if (bcm2079x_dev == NULL) {
+		dev_err(&client->dev,
+			"failed to allocate memory for module data\n");
+		ret = -ENOMEM;
+		goto err_exit;
+	}
+
+	bcm2079x_dev->wake_gpio = platform_data->wake_gpio;
+	bcm2079x_dev->irq_gpio = platform_data->irq_gpio;
+	bcm2079x_dev->en_gpio = platform_data->en_gpio;
+	bcm2079x_dev->client = client;
+
+	/* init mutex and queues */
+	init_waitqueue_head(&bcm2079x_dev->read_wq);
+	mutex_init(&bcm2079x_dev->read_mutex);
+	spin_lock_init(&bcm2079x_dev->irq_enabled_lock);
+
+	bcm2079x_dev->bcm2079x_device.minor = MISC_DYNAMIC_MINOR;
+	bcm2079x_dev->bcm2079x_device.name = "bcm2079x-i2c";
+	bcm2079x_dev->bcm2079x_device.fops = &bcm2079x_dev_fops;
+
+	ret = misc_register(&bcm2079x_dev->bcm2079x_device);
+	if (ret) {
+		dev_err(&client->dev, "misc_register failed\n");
+		goto err_misc_register;
+	}
+
+	/* request irq.  the irq is set whenever the chip has data available
+	 * for reading.  it is cleared when all data has been read.
+	 */
+	dev_info(&client->dev, "requesting IRQ %d\n", client->irq);
+	bcm2079x_dev->irq_enabled = true;
+	ret = request_irq(client->irq, bcm2079x_dev_irq_handler,
+			IRQF_TRIGGER_RISING, client->name, bcm2079x_dev);
+	if (ret) {
+		dev_err(&client->dev, "request_irq failed\n");
+		goto err_request_irq_failed;
+	}
+	bcm2079x_disable_irq(bcm2079x_dev);
+	i2c_set_clientdata(client, bcm2079x_dev);
+	dev_info(&client->dev,
+		 "%s, probing bcm2079x driver exited successfully\n",
+		 __func__);
+	return 0;
+
+err_request_irq_failed:
+	misc_deregister(&bcm2079x_dev->bcm2079x_device);
+err_misc_register:
+	mutex_destroy(&bcm2079x_dev->read_mutex);
+	kfree(bcm2079x_dev);
+err_exit:
+	gpio_free(platform_data->wake_gpio);
+err_wake:
+	gpio_free(platform_data->en_gpio);
+err_en:
+	gpio_free(platform_data->irq_gpio);
+	return ret;
+}
+
+static int bcm2079x_remove(struct i2c_client *client)
+{
+	struct bcm2079x_dev *bcm2079x_dev;
+
+	bcm2079x_dev = i2c_get_clientdata(client);
+	free_irq(client->irq, bcm2079x_dev);
+	misc_deregister(&bcm2079x_dev->bcm2079x_device);
+	mutex_destroy(&bcm2079x_dev->read_mutex);
+	gpio_free(bcm2079x_dev->irq_gpio);
+	gpio_free(bcm2079x_dev->en_gpio);
+	gpio_free(bcm2079x_dev->wake_gpio);
+	kfree(bcm2079x_dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id bcm2079x_id[] = {
+	{"bcm2079x-i2c", 0},
+	{}
+};
+
+static struct i2c_driver bcm2079x_driver = {
+	.id_table = bcm2079x_id,
+	.probe = bcm2079x_probe,
+	.remove = bcm2079x_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "bcm2079x-i2c",
+	},
+};
+
+/*
+ * module load/unload record keeping
+ */
+
+static int __init bcm2079x_dev_init(void)
+{
+	return i2c_add_driver(&bcm2079x_driver);
+}
+module_init(bcm2079x_dev_init);
+
+static void __exit bcm2079x_dev_exit(void)
+{
+	i2c_del_driver(&bcm2079x_driver);
+}
+module_exit(bcm2079x_dev_exit);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("NFC bcm2079x driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nfc/bcm2079x/bcm2079x.h b/drivers/nfc/bcm2079x/bcm2079x.h
new file mode 100644
index 0000000..b8b243f
--- /dev/null
+++ b/drivers/nfc/bcm2079x/bcm2079x.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _BCM2079X_H
+#define _BCM2079X_H
+
+#define BCMNFC_MAGIC	0xFA
+
+#define BCMNFC_POWER_CTL	_IO(BCMNFC_MAGIC, 0x01)
+#define BCMNFC_WAKE_CTL	_IO(BCMNFC_MAGIC, 0x05)
+#define BCMNFC_SET_ADDR	_IO(BCMNFC_MAGIC, 0x07)
+
+struct bcm2079x_platform_data {
+	unsigned int irq_gpio;
+	unsigned int en_gpio;
+	unsigned int wake_gpio;
+};
+
+#endif
-- 
1.7.9.5

Re:

[Joe Perches]

On Mon, 2013-07-08 at 21:52 +0000, Jeffrey (Sheng-Hui) Chu wrote:
[]
> diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
[]
> +/* do not change below */
> +#define MAX_BUFFER_SIZE		780
[]
> +static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
> +					size_t count, loff_t *offset)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +	unsigned char tmp[MAX_BUFFER_SIZE];

780 bytes on stack isn't a great idea.

> +static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
> +					size_t count, loff_t *offset)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +	char tmp[MAX_BUFFER_SIZE];

etc.

> +	int ret;
> +
> +	if (count > MAX_BUFFER_SIZE) {
> +		dev_err(&bcm2079x_dev->client->dev, "out of memory\n");

Out of memory isn't really true.
The packet size is just too big for your
little buffer.

> +static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
> +{
> +	int ret = 0;
> +
> +	struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
> +							struct bcm2079x_dev,
> +							bcm2079x_device);
> +	filp->private_data = bcm2079x_dev;
> +	bcm2079x_init_stat(bcm2079x_dev);
> +	bcm2079x_enable_irq(bcm2079x_dev);
> +	dev_info(&bcm2079x_dev->client->dev,
> +		 "%d,%d\n", imajor(inode), iminor(inode));

Looks to me like this should be dev_dbg not dev_info

Re:

[Arend van Spriel]

+ Samuel

On 07/08/2013 11:52 PM, Jeffrey (Sheng-Hui) Chu wrote:
>  From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
> From: Jeffrey Chu <jeffchu@broadcom.com>
> Date: Mon, 8 Jul 2013 17:50:21 -0400
> Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.

The subject did not show in my mailbox. Not sure if necessary, but I 
tend to send patches to a maintainer and CC the appropriate list(s). So 
the nfc list as well (linux-nfc@lists.01.org).

Regards,
Arend

> Signed-off-by: Jeffrey Chu <jeffchu@broadcom.com>
> ---
>   drivers/nfc/Kconfig                 |    1 +
>   drivers/nfc/Makefile                |    1 +
>   drivers/nfc/bcm2079x/Kconfig        |   10 +
>   drivers/nfc/bcm2079x/Makefile       |    4 +
>   drivers/nfc/bcm2079x/bcm2079x-i2c.c |  416 +++++++++++++++++++++++++++++++++++
>   drivers/nfc/bcm2079x/bcm2079x.h     |   34 +++
>   6 files changed, 466 insertions(+)
>   create mode 100644 drivers/nfc/bcm2079x/Kconfig
>   create mode 100644 drivers/nfc/bcm2079x/Makefile
>   create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
>   create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h
>
> diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
> index 74a852e..fa540f4 100644
> --- a/drivers/nfc/Kconfig
> +++ b/drivers/nfc/Kconfig
> @@ -38,5 +38,6 @@ config NFC_MEI_PHY
>
>   source "drivers/nfc/pn544/Kconfig"
>   source "drivers/nfc/microread/Kconfig"
> +source "drivers/nfc/bcm2079x/Kconfig"
>
>   endmenu
> diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
> index aa6bd65..a56adf6 100644
> --- a/drivers/nfc/Makefile
> +++ b/drivers/nfc/Makefile
> @@ -7,5 +7,6 @@ obj-$(CONFIG_NFC_MICROREAD)	+= microread/
>   obj-$(CONFIG_NFC_PN533)		+= pn533.o
>   obj-$(CONFIG_NFC_WILINK)	+= nfcwilink.o
>   obj-$(CONFIG_NFC_MEI_PHY)	+= mei_phy.o
> +obj-$(CONFIG_NFC_PN544)		+= bcm2079x/

I suspect this is a copy-paste error right? Should be 
obj-$(CONFIG_NFC_BCM2079X_I2C).

>
>   ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
> diff --git a/drivers/nfc/bcm2079x/Kconfig b/drivers/nfc/bcm2079x/Kconfig
> new file mode 100644
> index 0000000..889e181
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/Kconfig
> @@ -0,0 +1,10 @@
> +config NFC_BCM2079X_I2C
> +	tristate "NFC BCM2079x i2c support"
> +	depends on I2C
> +	default n
> +	---help---
> +	  Broadcom BCM2079x i2c driver.
> +	  This is a driver that allows transporting NCI/HCI command and response
> +	  to/from Broadcom bcm2079x NFC Controller.  Select this if your
> +	  platform is using i2c bus to controll this chip.
> +
> diff --git a/drivers/nfc/bcm2079x/Makefile b/drivers/nfc/bcm2079x/Makefile
> new file mode 100644
> index 0000000..be64d35
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Makefile for bcm2079x NFC driver
> +#
> +obj-$(CONFIG_NFC_BCM2079X_I2C) += bcm2079x-i2c.o
> diff --git a/drivers/nfc/bcm2079x/bcm2079x-i2c.c b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
> new file mode 100644
> index 0000000..988a65e
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/bcm2079x-i2c.c
> @@ -0,0 +1,416 @@
> +/*
> + * Copyright (C) 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/fs.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/miscdevice.h>
> +#include <linux/spinlock.h>
> +#include <linux/poll.h>
> +
> +#include "bcm2079x.h"
> +
> +/* do not change below */
> +#define MAX_BUFFER_SIZE		780
> +
> +/* Read data */
> +#define PACKET_HEADER_SIZE_NCI	(4)
> +#define PACKET_HEADER_SIZE_HCI	(3)
> +#define PACKET_TYPE_NCI		(16)
> +#define PACKET_TYPE_HCIEV	(4)
> +#define MAX_PACKET_SIZE		(PACKET_HEADER_SIZE_NCI + 255)
> +
> +struct bcm2079x_dev {
> +	wait_queue_head_t read_wq;
> +	struct mutex read_mutex;
> +	struct i2c_client *client;
> +	struct miscdevice bcm2079x_device;
> +	unsigned int wake_gpio;
> +	unsigned int en_gpio;
> +	unsigned int irq_gpio;
> +	bool irq_enabled;
> +	spinlock_t irq_enabled_lock;
> +	unsigned int count_irq;
> +};
> +
> +static void bcm2079x_init_stat(struct bcm2079x_dev *bcm2079x_dev)
> +{
> +	bcm2079x_dev->count_irq = 0;
> +}
> +
> +static void bcm2079x_disable_irq(struct bcm2079x_dev *bcm2079x_dev)
> +{
> +	unsigned long flags;
> +	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> +	if (bcm2079x_dev->irq_enabled) {
> +		disable_irq_nosync(bcm2079x_dev->client->irq);
> +		bcm2079x_dev->irq_enabled = false;
> +	}
> +	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +}
> +
> +static void bcm2079x_enable_irq(struct bcm2079x_dev *bcm2079x_dev)
> +{
> +	unsigned long flags;
> +	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> +	if (!bcm2079x_dev->irq_enabled) {
> +		bcm2079x_dev->irq_enabled = true;
> +		enable_irq(bcm2079x_dev->client->irq);
> +	}
> +	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +}
> +
> +static void set_client_addr(struct bcm2079x_dev *bcm2079x_dev, int addr)
> +{
> +	struct i2c_client *client = bcm2079x_dev->client;
> +	dev_info(&client->dev,
> +		"Set client device address from 0x%04X flag = "
> +		"%02x, to  0x%04X\n",
> +		client->addr, client->flags, addr);
> +		client->addr = addr;
> +		if (addr < 0x80)
> +			client->flags &= ~I2C_CLIENT_TEN;
> +		else
> +			client->flags |= I2C_CLIENT_TEN;
> +}
> +
> +static irqreturn_t bcm2079x_dev_irq_handler(int irq, void *dev_id)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = dev_id;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> +	bcm2079x_dev->count_irq++;
> +	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +	wake_up(&bcm2079x_dev->read_wq);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static unsigned int bcm2079x_dev_poll(struct file *filp, poll_table *wait)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +	unsigned int mask = 0;
> +	unsigned long flags;
> +
> +	poll_wait(filp, &bcm2079x_dev->read_wq, wait);
> +
> +	spin_lock_irqsave(&bcm2079x_dev->irq_enabled_lock, flags);
> +	if (bcm2079x_dev->count_irq > 0) {
> +		bcm2079x_dev->count_irq--;
> +		mask |= POLLIN | POLLRDNORM;
> +	}
> +	spin_unlock_irqrestore(&bcm2079x_dev->irq_enabled_lock, flags);
> +
> +	return mask;
> +}
> +
> +static ssize_t bcm2079x_dev_read(struct file *filp, char __user *buf,
> +					size_t count, loff_t *offset)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +	unsigned char tmp[MAX_BUFFER_SIZE];
> +	int total, len, ret;
> +
> +	total = 0;
> +	len = 0;
> +
> +	if (count > MAX_BUFFER_SIZE)
> +		count = MAX_BUFFER_SIZE;
> +
> +	mutex_lock(&bcm2079x_dev->read_mutex);
> +
> +	/* Read the first 4 bytes to include the length of the NCI or
> +		HCI packet.*/
> +	ret = i2c_master_recv(bcm2079x_dev->client, tmp, 4);
> +	if (ret == 4) {
> +		total = ret;
> +		/* First byte is the packet type*/
> +		switch (tmp[0]) {
> +		case PACKET_TYPE_NCI:
> +			len = tmp[PACKET_HEADER_SIZE_NCI-1];
> +			break;
> +
> +		case PACKET_TYPE_HCIEV:
> +			len = tmp[PACKET_HEADER_SIZE_HCI-1];
> +			if (len == 0)
> +				total--;
> +			else
> +				len--;
> +			break;
> +
> +		default:
> +			len = 0;/*Unknown packet byte */
> +			break;
> +		} /* switch*/
> +
> +		/* make sure full packet fits in the buffer*/
> +		if (len > 0 && (len + total) <= count) {
> +			/** read the remainder of the packet.
> +			**/
> +			ret = i2c_master_recv(bcm2079x_dev->client, tmp+total,
> +				len);
> +			if (ret == len)
> +				total += len;
> +		} /* if */
> +	} /* if */
> +
> +	mutex_unlock(&bcm2079x_dev->read_mutex);
> +
> +	if (total > count || copy_to_user(buf, tmp, total)) {
> +		dev_err(&bcm2079x_dev->client->dev,
> +			"failed to copy to user space, total = %d\n", total);
> +		total = -EFAULT;
> +	}
> +
> +	return total;
> +}
> +
> +static ssize_t bcm2079x_dev_write(struct file *filp, const char __user *buf,
> +					size_t count, loff_t *offset)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +	char tmp[MAX_BUFFER_SIZE];
> +	int ret;
> +
> +	if (count > MAX_BUFFER_SIZE) {
> +		dev_err(&bcm2079x_dev->client->dev, "out of memory\n");
> +		return -ENOMEM;
> +	}
> +
> +	if (copy_from_user(tmp, buf, count)) {
> +		dev_err(&bcm2079x_dev->client->dev,
> +			"failed to copy from user space\n");
> +		return -EFAULT;
> +	}
> +
> +	mutex_lock(&bcm2079x_dev->read_mutex);
> +	/* Write data */
> +
> +	ret = i2c_master_send(bcm2079x_dev->client, tmp, count);
> +	if (ret != count) {
> +		dev_err(&bcm2079x_dev->client->dev,
> +			"failed to write %d\n", ret);
> +		ret = -EIO;
> +	}
> +	mutex_unlock(&bcm2079x_dev->read_mutex);
> +
> +	return ret;
> +}
> +
> +static int bcm2079x_dev_open(struct inode *inode, struct file *filp)
> +{
> +	int ret = 0;
> +
> +	struct bcm2079x_dev *bcm2079x_dev = container_of(filp->private_data,
> +							struct bcm2079x_dev,
> +							bcm2079x_device);
> +	filp->private_data = bcm2079x_dev;
> +	bcm2079x_init_stat(bcm2079x_dev);
> +	bcm2079x_enable_irq(bcm2079x_dev);
> +	dev_info(&bcm2079x_dev->client->dev,
> +		 "%d,%d\n", imajor(inode), iminor(inode));
> +
> +	return ret;
> +}
> +
> +static long bcm2079x_dev_unlocked_ioctl(struct file *filp,
> +					 unsigned int cmd, unsigned long arg)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev = filp->private_data;
> +
> +	switch (cmd) {
> +	case BCMNFC_POWER_CTL:
> +		gpio_set_value(bcm2079x_dev->en_gpio, arg);
> +		break;
> +	case BCMNFC_WAKE_CTL:
> +		gpio_set_value(bcm2079x_dev->wake_gpio, arg);
> +		break;
> +	case BCMNFC_SET_ADDR:
> +		set_client_addr(bcm2079x_dev, arg);
> +		break;
> +	default:
> +		dev_err(&bcm2079x_dev->client->dev,
> +			"%s, unknown cmd (%x, %lx)\n", __func__, cmd, arg);
> +		return -ENOSYS;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct file_operations bcm2079x_dev_fops = {
> +	.owner = THIS_MODULE,
> +	.llseek = no_llseek,
> +	.poll = bcm2079x_dev_poll,
> +	.read = bcm2079x_dev_read,
> +	.write = bcm2079x_dev_write,
> +	.open = bcm2079x_dev_open,
> +	.unlocked_ioctl = bcm2079x_dev_unlocked_ioctl
> +};
> +
> +static int bcm2079x_probe(struct i2c_client *client,
> +				const struct i2c_device_id *id)
> +{
> +	int ret;
> +	struct bcm2079x_platform_data *platform_data;
> +	struct bcm2079x_dev *bcm2079x_dev;
> +
> +	platform_data = client->dev.platform_data;
> +
> +	dev_info(&client->dev, "%s, probing bcm2079x driver flags = %x\n",
> +		__func__, client->flags);
> +	if (platform_data == NULL) {
> +		dev_err(&client->dev, "nfc probe fail\n");
> +		return -ENODEV;
> +	}
> +
> +	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> +		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = gpio_request_one(platform_data->irq_gpio, GPIOF_IN, "nfc_irq");
> +	if (ret)
> +		return -ENODEV;
> +	ret = gpio_request_one(platform_data->en_gpio, GPIOF_OUT_INIT_LOW,
> +		"nfc_en");
> +	if (ret)
> +		goto err_en;
> +	ret = gpio_request_one(platform_data->wake_gpio, GPIOF_OUT_INIT_LOW,
> +		"nfc_wake");
> +	if (ret)
> +		goto err_wake;
> +
> +	gpio_set_value(platform_data->en_gpio, 0);
> +	gpio_set_value(platform_data->wake_gpio, 0);
> +
> +	bcm2079x_dev = kzalloc(sizeof(*bcm2079x_dev), GFP_KERNEL);
> +	if (bcm2079x_dev == NULL) {
> +		dev_err(&client->dev,
> +			"failed to allocate memory for module data\n");
> +		ret = -ENOMEM;
> +		goto err_exit;
> +	}
> +
> +	bcm2079x_dev->wake_gpio = platform_data->wake_gpio;
> +	bcm2079x_dev->irq_gpio = platform_data->irq_gpio;
> +	bcm2079x_dev->en_gpio = platform_data->en_gpio;
> +	bcm2079x_dev->client = client;
> +
> +	/* init mutex and queues */
> +	init_waitqueue_head(&bcm2079x_dev->read_wq);
> +	mutex_init(&bcm2079x_dev->read_mutex);
> +	spin_lock_init(&bcm2079x_dev->irq_enabled_lock);
> +
> +	bcm2079x_dev->bcm2079x_device.minor = MISC_DYNAMIC_MINOR;
> +	bcm2079x_dev->bcm2079x_device.name = "bcm2079x-i2c";
> +	bcm2079x_dev->bcm2079x_device.fops = &bcm2079x_dev_fops;
> +
> +	ret = misc_register(&bcm2079x_dev->bcm2079x_device);
> +	if (ret) {
> +		dev_err(&client->dev, "misc_register failed\n");
> +		goto err_misc_register;
> +	}
> +
> +	/* request irq.  the irq is set whenever the chip has data available
> +	 * for reading.  it is cleared when all data has been read.
> +	 */
> +	dev_info(&client->dev, "requesting IRQ %d\n", client->irq);
> +	bcm2079x_dev->irq_enabled = true;
> +	ret = request_irq(client->irq, bcm2079x_dev_irq_handler,
> +			IRQF_TRIGGER_RISING, client->name, bcm2079x_dev);
> +	if (ret) {
> +		dev_err(&client->dev, "request_irq failed\n");
> +		goto err_request_irq_failed;
> +	}
> +	bcm2079x_disable_irq(bcm2079x_dev);
> +	i2c_set_clientdata(client, bcm2079x_dev);
> +	dev_info(&client->dev,
> +		 "%s, probing bcm2079x driver exited successfully\n",
> +		 __func__);
> +	return 0;
> +
> +err_request_irq_failed:
> +	misc_deregister(&bcm2079x_dev->bcm2079x_device);
> +err_misc_register:
> +	mutex_destroy(&bcm2079x_dev->read_mutex);
> +	kfree(bcm2079x_dev);
> +err_exit:
> +	gpio_free(platform_data->wake_gpio);
> +err_wake:
> +	gpio_free(platform_data->en_gpio);
> +err_en:
> +	gpio_free(platform_data->irq_gpio);
> +	return ret;
> +}
> +
> +static int bcm2079x_remove(struct i2c_client *client)
> +{
> +	struct bcm2079x_dev *bcm2079x_dev;
> +
> +	bcm2079x_dev = i2c_get_clientdata(client);
> +	free_irq(client->irq, bcm2079x_dev);
> +	misc_deregister(&bcm2079x_dev->bcm2079x_device);
> +	mutex_destroy(&bcm2079x_dev->read_mutex);
> +	gpio_free(bcm2079x_dev->irq_gpio);
> +	gpio_free(bcm2079x_dev->en_gpio);
> +	gpio_free(bcm2079x_dev->wake_gpio);
> +	kfree(bcm2079x_dev);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id bcm2079x_id[] = {
> +	{"bcm2079x-i2c", 0},
> +	{}
> +};
> +
> +static struct i2c_driver bcm2079x_driver = {
> +	.id_table = bcm2079x_id,
> +	.probe = bcm2079x_probe,
> +	.remove = bcm2079x_remove,
> +	.driver = {
> +		.owner = THIS_MODULE,
> +		.name = "bcm2079x-i2c",
> +	},
> +};
> +
> +/*
> + * module load/unload record keeping
> + */
> +
> +static int __init bcm2079x_dev_init(void)
> +{
> +	return i2c_add_driver(&bcm2079x_driver);
> +}
> +module_init(bcm2079x_dev_init);
> +
> +static void __exit bcm2079x_dev_exit(void)
> +{
> +	i2c_del_driver(&bcm2079x_driver);
> +}
> +module_exit(bcm2079x_dev_exit);
> +
> +MODULE_AUTHOR("Broadcom");
> +MODULE_DESCRIPTION("NFC bcm2079x driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/nfc/bcm2079x/bcm2079x.h b/drivers/nfc/bcm2079x/bcm2079x.h
> new file mode 100644
> index 0000000..b8b243f
> --- /dev/null
> +++ b/drivers/nfc/bcm2079x/bcm2079x.h
> @@ -0,0 +1,34 @@
> +/*
> + * Copyright (C) 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#ifndef _BCM2079X_H
> +#define _BCM2079X_H
> +
> +#define BCMNFC_MAGIC	0xFA
> +
> +#define BCMNFC_POWER_CTL	_IO(BCMNFC_MAGIC, 0x01)
> +#define BCMNFC_WAKE_CTL	_IO(BCMNFC_MAGIC, 0x05)
> +#define BCMNFC_SET_ADDR	_IO(BCMNFC_MAGIC, 0x07)
> +
> +struct bcm2079x_platform_data {
> +	unsigned int irq_gpio;
> +	unsigned int en_gpio;
> +	unsigned int wake_gpio;
> +};
> +
> +#endif
>

Re:

[Samuel Ortiz]

Hi Arend, Jeffrey,

On Tue, Jul 09, 2013 at 03:22:25PM +0200, Arend van Spriel wrote:
> + Samuel
> 
> On 07/08/2013 11:52 PM, Jeffrey (Sheng-Hui) Chu wrote:
> > From b4555081b1d27a31c22abede8e0397f1d61fbb04 Mon Sep 17 00:00:00 2001
> >From: Jeffrey Chu <jeffchu@broadcom.com>
> >Date: Mon, 8 Jul 2013 17:50:21 -0400
> >Subject: [PATCH] Add bcm2079x-i2c driver for Bcm2079x NFC Controller.
> 
> The subject did not show in my mailbox. Not sure if necessary, but I
> tend to send patches to a maintainer and CC the appropriate list(s).
> So the nfc list as well (linux-nfc@lists.01.org).
Thanks for cc'ing me. Yes, the NFC maintainers emails and the mailing
list are in the MAINTAINERS file, so I expect people to use them to post
their NFC related patches.


> >---
> >  drivers/nfc/Kconfig                 |    1 +
> >  drivers/nfc/Makefile                |    1 +
> >  drivers/nfc/bcm2079x/Kconfig        |   10 +
> >  drivers/nfc/bcm2079x/Makefile       |    4 +
> >  drivers/nfc/bcm2079x/bcm2079x-i2c.c |  416 +++++++++++++++++++++++++++++++++++
> >  drivers/nfc/bcm2079x/bcm2079x.h     |   34 +++
> >  6 files changed, 466 insertions(+)
> >  create mode 100644 drivers/nfc/bcm2079x/Kconfig
> >  create mode 100644 drivers/nfc/bcm2079x/Makefile
> >  create mode 100644 drivers/nfc/bcm2079x/bcm2079x-i2c.c
> >  create mode 100644 drivers/nfc/bcm2079x/bcm2079x.h
Jeffrey, I appreciate the upstreaming effort, but I'm not going to take
this patch. It's designed for Android exclusively and not using any of
the NFC kernel APIs.
In particular, we have a full NCI stack that you could use. There
currently is an SPI transport layer, adding an i2c one would be really
easy.
If you're interested and can spend some cycles on this, I can surely
help you with the kernel APIs and how your driver should look like.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

(no subject)

[Callum Hutchinson]

[-- Attachment #1: Type: text/plain, Size: 377 bytes --]

Hi Kernel Maintainers,

Tried to report this properly via email but got some formatting issues
coming back, I've attached the content of the original email report as
'Report.txt'.

It is the same file as found on comment 12 on Launchpad bug.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1142385

Apologies for any missing information or lack of reporting experience :)

[-- Attachment #2: Report.txt --]
[-- Type: text/plain, Size: 116037 bytes --]

B43 Wireless Autoconnect Failure

I installed raring to test whether this bug existed in it and quantal too.
In the 3.8+ kernels there seems to be an issue with the b43 drivers, my
wireless works however it won't automatically connect to my hidden wireless
network. I have to go into network manager on each login and manually
select the option to connect, it takes a while but then the connection
works fine.
I know this didn't exist in 3.7.x because I was using those kernels
absolutely fine, it's only when I tried 3.8 on both quantal and raring that
the issue arose.
Note: I can't edit the wireless settings on my network as I am not the
administrator in my house.

ProblemType: Bug
DistroRelease: Ubuntu 13.04
Package: linux-image-3.8.0-9-generic 3.8.0-9.18
ProcVersionSignature: Ubuntu 3.8.0-9.18-generic 3.8.1
Uname: Linux 3.8.0-9-generic x86_64
ApportVersion: 2.9-0ubuntu2
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: callum 1770 F.... pulseaudio
                      callum 3234 F.... pulseaudio
CRDA:
 country GB:
  (2402 - 2482 @ 40), (N/A, 20)
  (5170 - 5250 @ 40), (N/A, 20)
  (5250 - 5330 @ 40), (N/A, 20), DFS
  (5490 - 5710 @ 40), (N/A, 27), DFS
Date: Sun Mar 3 16:13:52 2013
HibernationDevice: RESUME=UUID=53b96653-3e0d-426b-a911-9c34d8657655
InstallationDate: Installed on 2013-03-02 (1 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Alpha amd64 (20130301)
MachineType: Apple Inc. Macmini5,1
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-9-generic
root=UUID=b4faf392-19de-4749-bd48-bbda7a7519b3 ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.8.0-9-generic N/A
 linux-backports-modules-3.8.0-9-generic N/A
 linux-firmware 1.103
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/24/2012
dmi.bios.vendor: Apple Inc.
dmi.bios.version: MM51.88Z.0077.B10.1201241549
dmi.board.asset.tag: Base Board Asset Tag#
dmi.board.name: Mac-8ED6AF5B48C039E1
dmi.board.vendor: Apple Inc.
dmi.board.version: Macmini5,1
dmi.chassis.type: 16
dmi.chassis.vendor: Apple Inc.
dmi.chassis.version: Mac-8ED6AF5B48C039E1
dmi.modalias:
dmi:bvnAppleInc.:bvrMM51.88Z.0077.B10.1201241549:bd01/24/2012:svnAppleInc.:pnMacmini5,1:pvr1.0:rvnAppleInc.:rnMac-8ED6AF5B48C039E1:rvrMacmini5,1:cvnAppleInc.:ct16:cvrMac-8ED6AF5B48C039E1:
dmi.product.name: Macmini5,1
dmi.product.version: 1.0
dmi.sys.vendor: Apple Inc.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1142385

amd64, mac, b43, networking, wireless, kernel

Linux version 3.9.0-030900rc4-generic (apw@gomeisa) (gcc version 4.6.3
(Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201303232035 SMP Sun Mar 24 00:36:21 UTC
2013

Description: Ubuntu Raring Ringtail (development branch)

Release: 13.04

If some fields are empty or look unusual you may have an old version.

Compare to the current minimal requirements in Documentation/Changes.



Linux callum-Macmini 3.9.0-030900rc4-generic #201303232035 SMP Sun Mar 24
00:36:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux



Gnu C                  4.7

Gnu make               3.81

binutils               2.23.2

util-linux             2.20.1

mount                  support

module-init-tools      9

e2fsprogs              1.42.5

pcmciautils            018

PPP                    2.4.5

Linux C Library        2.17

Dynamic linker (ldd)   2.17

Procps                 3.3.3

Net-tools              1.60

Kbd                    1.15.5

Sh-utils               8.20

wireless-tools         30

Modules Loaded         btrfs raid6_pq zlib_deflate xor ufs qnx4 hfsplus hfs
minix ntfs msdos jfs xfs libcrc32c reiserfs ext2 hid_magicmouse joydev hidp
parport_pc ppdev bnep rfcomm coretemp kvm_intel arc4 kvm snd_hda_codec_hdmi
snd_hda_codec_cirrus snd_hda_intel b43 btusb ghash_clmulni_intel
snd_hda_codec aesni_intel bluetooth aes_x86_64 snd_hwdep xts snd_pcm lrw
gf128mul binfmt_misc ablk_helper mac80211 i915 snd_page_alloc cryptd
snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq drm_kms_helper
snd_seq_device drm snd_timer ssb snd apple_gmux i2c_algo_bit soundcore
microcode shpchp applesmc mei apple_bl mac_hid input_polldev lpc_ich bcma
video lp parport hid_generic hid_apple usbhid hid firewire_ohci sdhci_pci
sdhci firewire_core tg3 crc_itu_t ptp pps_core
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 42
model name : Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz
stepping : 7
microcode : 0x1a
cpu MHz : 800.000
cache size : 3072 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3
cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes
xsave avx lahf_lm ida arat xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid
bogomips : 4589.47
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

btrfs 843910 0 - Live 0x0000000000000000
raid6_pq 97812 1 btrfs, Live 0x0000000000000000
zlib_deflate 27110 1 btrfs, Live 0x0000000000000000
xor 21411 1 btrfs, Live 0x0000000000000000
ufs 75149 0 - Live 0x0000000000000000
qnx4 13396 0 - Live 0x0000000000000000
hfsplus 103443 0 - Live 0x0000000000000000
hfs 54780 0 - Live 0x0000000000000000
minix 36387 0 - Live 0x0000000000000000
ntfs 101633 0 - Live 0x0000000000000000
msdos 17332 0 - Live 0x0000000000000000
jfs 186589 0 - Live 0x0000000000000000
xfs 888928 0 - Live 0x0000000000000000
libcrc32c 12615 2 btrfs,xfs, Live 0x0000000000000000
reiserfs 248298 0 - Live 0x0000000000000000
ext2 73755 0 - Live 0x0000000000000000
hid_magicmouse 13712 0 - Live 0x0000000000000000
joydev 17613 0 - Live 0x0000000000000000
hidp 22599 2 - Live 0x0000000000000000
parport_pc 32866 0 - Live 0x0000000000000000
ppdev 17106 0 - Live 0x0000000000000000
bnep 18258 2 - Live 0x0000000000000000
rfcomm 47863 12 - Live 0x0000000000000000
coretemp 13596 0 - Live 0x0000000000000000
kvm_intel 138733 0 - Live 0x0000000000000000
arc4 12573 2 - Live 0x0000000000000000
kvm 452835 1 kvm_intel, Live 0x0000000000000000
snd_hda_codec_hdmi 37407 1 - Live 0x0000000000000000
snd_hda_codec_cirrus 14090 1 - Live 0x0000000000000000
snd_hda_intel 44397 3 - Live 0x0000000000000000
b43 391985 0 - Live 0x0000000000000000
btusb 18291 0 - Live 0x0000000000000000
ghash_clmulni_intel 13259 0 - Live 0x0000000000000000
snd_hda_codec 190010 3
snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel, Live
0x0000000000000000
aesni_intel 55449 2 - Live 0x0000000000000000
bluetooth 251354 31 hidp,bnep,rfcomm,btusb, Live 0x0000000000000000
aes_x86_64 17131 1 aesni_intel, Live 0x0000000000000000
snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000
xts 12922 1 aesni_intel, Live 0x0000000000000000
snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec, Live
0x0000000000000000
lrw 13294 1 aesni_intel, Live 0x0000000000000000
gf128mul 14951 2 xts,lrw, Live 0x0000000000000000
binfmt_misc 17540 1 - Live 0x0000000000000000
ablk_helper 13597 1 aesni_intel, Live 0x0000000000000000
mac80211 656112 1 b43, Live 0x0000000000000000
i915 631460 4 - Live 0x0000000000000000
snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000
cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper, Live
0x0000000000000000
snd_seq_midi 13324 0 - Live 0x0000000000000000
snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000
snd_rawmidi 30417 1 snd_seq_midi, Live 0x0000000000000000
cfg80211 547072 2 b43,mac80211, Live 0x0000000000000000
snd_seq 61930 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000
drm_kms_helper 49082 1 i915, Live 0x0000000000000000
snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
0x0000000000000000
drm 295908 5 i915,drm_kms_helper, Live 0x0000000000000000
snd_timer 29989 2 snd_pcm,snd_seq, Live 0x0000000000000000
ssb 57592 1 b43, Live 0x0000000000000000
snd 69533 16
snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
Live 0x0000000000000000
apple_gmux 13406 0 - Live 0x0000000000000000
i2c_algo_bit 13564 1 i915, Live 0x0000000000000000
soundcore 12680 1 snd, Live 0x0000000000000000
microcode 22923 0 - Live 0x0000000000000000
shpchp 37201 0 - Live 0x0000000000000000
applesmc 19564 0 - Live 0x0000000000000000
mei 46555 0 - Live 0x0000000000000000
apple_bl 13673 1 apple_gmux, Live 0x0000000000000000
mac_hid 13253 0 - Live 0x0000000000000000
input_polldev 13896 1 applesmc, Live 0x0000000000000000
lpc_ich 17060 0 - Live 0x0000000000000000
bcma 41434 1 b43, Live 0x0000000000000000
video 19467 2 i915,apple_gmux, Live 0x0000000000000000
lp 17799 0 - Live 0x0000000000000000
parport 46562 3 parport_pc,ppdev,lp, Live 0x0000000000000000
hid_generic 12548 0 - Live 0x0000000000000000
hid_apple 13389 0 - Live 0x0000000000000000
usbhid 47346 0 - Live 0x0000000000000000
hid 101248 5 hid_magicmouse,hidp,hid_generic,hid_apple,usbhid, Live
0x0000000000000000
firewire_ohci 44864 0 - Live 0x0000000000000000
sdhci_pci 18720 0 - Live 0x0000000000000000
sdhci 33227 1 sdhci_pci, Live 0x0000000000000000
firewire_core 64836 1 firewire_ohci, Live 0x0000000000000000
tg3 165632 0 - Live 0x0000000000000000
crc_itu_t 12707 1 firewire_core, Live 0x0000000000000000
ptp 18668 1 tg3, Live 0x0000000000000000
pps_core 14080 1 ptp, Live 0x0000000000000000

0000-0cf7 : PCI Bus 0000:00
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-0060 : keyboard
  0062-0062 : EC data
  0064-0064 : keyboard
  0066-0066 : EC cmd
  0070-0077 : rtc0
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0300-031f : applesmc
  0400-047f : pnp 00:04
    0400-0403 : ACPI PM1a_EVT_BLK
    0404-0405 : ACPI PM1a_CNT_BLK
    0408-040b : ACPI PM_TMR
    0410-0415 : ACPI CPU throttle
    0420-042f : ACPI GPE0_BLK
    0430-0433 : iTCO_wdt
    0450-0450 : ACPI PM2_CNT_BLK
    0460-047f : iTCO_wdt
  0500-057f : pnp 00:04
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
  1000-100f : pnp 00:04
  2000-203f : 0000:00:02.0
  2060-206f : 0000:00:1f.2
    2060-206f : ata_piix
  20c0-20df : 0000:00:1d.0
    20c0-20df : uhci_hcd
  2120-213f : 0000:00:1a.0
    2120-213f : uhci_hcd
  2140-2147 : 0000:00:1f.2
    2140-2147 : ata_piix
  2148-214f : 0000:00:1f.2
    2148-214f : ata_piix
  2158-215b : 0000:00:1f.2
    2158-215b : ata_piix
  215c-215f : 0000:00:1f.2
    215c-215f : ata_piix
  3000-3fff : PCI Bus 0000:06
  efa0-efbf : 0000:00:1f.3
  ffe0-ffef : 0000:00:1f.2
    ffe0-ffef : ata_piix
00000000-00000fff : reserved
00001000-0008efff : System RAM
0008f000-0008ffff : reserved
00090000-0009fbff : System RAM
0009fc00-000fffff : reserved
  000a0000-000bffff : PCI Bus 0000:00
  000c0000-000cedff : Video ROM
  000f0000-000fffff : System ROM
00100000-1fffffff : System RAM
  01000000-01710dd0 : Kernel code
  01710dd1-01cf3b7f : Kernel data
  01e3c000-01f75fff : Kernel bss
20000000-201fffff : reserved
  20000000-201fffff : pnp 00:09
20200000-3fffffff : System RAM
40000000-401fffff : reserved
  40000000-401fffff : pnp 00:09
40200000-8ad33fff : System RAM
8ad34000-8ad5efff : ACPI Non-volatile Storage
8ad5f000-8afa1fff : ACPI Tables
8afa2000-8affefff : reserved
8afff000-8affffff : ACPI Tables
8b000000-8f9fffff : reserved
8fa00000-feafffff : PCI Bus 0000:00
  90000000-9fffffff : 0000:00:02.0
  a0000000-a03fffff : 0000:00:02.0
  a0400000-a04fffff : PCI Bus 0000:02
    a0400000-a040ffff : 0000:02:00.0
      a0400000-a040ffff : tg3
    a0410000-a041ffff : 0000:02:00.0
      a0410000-a041ffff : tg3
    a0420000-a042ffff : 0000:02:00.1
      a0420000-a042ffff : mmc0
  a0500000-a05fffff : PCI Bus 0000:04
    a0500000-a05fffff : PCI Bus 0000:05
      a0500000-a0503fff : 0000:05:00.0
      a0504000-a05047ff : 0000:05:00.0
        a0504000-a05047ff : firewire_ohci
  a0600000-a06fffff : PCI Bus 0000:03
    a0600000-a0603fff : 0000:03:00.0
      a0600000-a0603fff : bcma-pci-bridge
  a0700000-a07fffff : PCI Bus 0000:02
  a0800000-a08fffff : PCI Bus 0000:01
  a0900000-a0903fff : 0000:00:1b.0
    a0900000-a0903fff : ICH HD audio
  a0906800-a0906bff : 0000:00:1d.7
    a0906800-a0906bff : ehci_hcd
  a0906c00-a0906fff : 0000:00:1a.7
    a0906c00-a0906fff : ehci_hcd
  a0907000-a09070ff : 0000:00:1f.3
  a0907100-a090710f : 0000:00:16.0
    a0907100-a090710f : mei
  a0a00000-a4efffff : PCI Bus 0000:06
  a4f00000-a8efffff : PCI Bus 0000:06
  e0000000-efffffff : reserved
    e0000000-efffffff : pnp 00:08
      e0000000-e9cfffff : PCI MMCONFIG 0000 [bus 00-9c]
fec00000-fec00fff : reserved
  fec00000-fec003ff : IOAPIC 0
fed00000-fed03fff : reserved
  fed00000-fed003ff : HPET 0
    fed00000-fed003ff : pnp 00:02
fed10000-fed13fff : reserved
fed18000-fed19fff : reserved
  fed18000-fed18fff : pnp 00:08
  fed19000-fed19fff : pnp 00:08
fed1c000-fed1ffff : reserved
  fed1c000-fed1ffff : pnp 00:08
    fed1f410-fed1f414 : iTCO_wdt
fed20000-fed3ffff : pnp 00:08
fed40000-fed44fff : PCI Bus 0000:00
fed45000-fed8ffff : pnp 00:08
fed90000-fed93fff : pnp 00:08
fee00000-fee00fff : Local APIC
  fee00000-fee00fff : reserved
ff800000-ffffffff : reserved
100000000-26fdfffff : System RAM
26fe00000-26fffffff : RAM buffer

AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory at a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports at ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory at a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory at a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

callum@callum-Macmini:~$ sudo lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
Subsystem: Apple Inc. Device 00e6
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
 Memory behind bridge: a0800000-a08fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Apple Inc. Device 00e6
 Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41b1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0a00000-a4efffff
 Prefetchable memory behind bridge: 00000000a4f00000-00000000a8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Apple Inc. Device 00e6
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41c1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=03 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Apple Inc. Device 00e6
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
 Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4152
 Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at a0907100 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4142
Kernel driver in use: mei

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #5 (rev 05) (prog-if 00 [UHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 2120 [size=32]
Capabilities: [50] PCI Advanced Features
 AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 23
Region 0: Memory at a0906c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory at a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports at ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory at a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory at a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

callum@callum-Macmini:~$ clear

callum@callum-Macmini:~$ sudo lspci -vvv
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family
DRAM Controller (rev 09)
 Subsystem: Apple Inc. Device 00e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
 Memory behind bridge: a0800000-a08fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Apple Inc. Device 00e6
 Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41b1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <1us, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
 Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=02 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core
Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=06, subordinate=9c, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a0a00000-a4efffff
 Prefetchable memory behind bridge: 00000000a4f00000-00000000a8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Apple Inc. Device 00e6
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
 Address: fee0f00c  Data: 41c1
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1
<4us
ClockPM- Surprise- LLActRep- BwNot+
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -3.5dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [140 v1] Root Complex Link
 Desc: PortNumber=03 ComponentID=01 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped
LinkValid+
 Addr: 00000000fed19000
Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA
controller])
Subsystem: Apple Inc. Device 00e6
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at 90000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 2000 [size=64]
 Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4152
 Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915

00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 (rev 04)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at a0907100 (64-bit, non-prefetchable) [size=16]
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4142
Kernel driver in use: mei

00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #5 (rev 05) (prog-if 00 [UHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 2120 [size=32]
Capabilities: [50] PCI Advanced Features
 AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 23
Region 0: Memory at a0906c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP+
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family
High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at a0900000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
 Address: 00000000fee0f00c  Data: 4162
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns,
L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Virtual Channel
 Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
 Ctrl: ArbSelect=Fixed
Status: InProgress-
 VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
 VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
 Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
 Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
 Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0700000-a07fffff
 Prefetchable memory behind bridge: 00000000a0400000-00000000a04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41d1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0600000-a06fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 41e1
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family
PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
 ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1
<16us
ClockPM- Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+
ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
 Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
 Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
 Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
 RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
 DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0f00c  Data: 4122
Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 [Core
i7, 15", 2011]
 Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Universal Host Controller #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 20c0 [size=32]
 Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
 Interrupt: pin A routed to IRQ 22
Region 0: Memory at a0906800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
 AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC
Controller (rev 05)
Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset
Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Intel Corporation Device 7270
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 2148 [size=8]
 Region 1: I/O ports at 215c [size=4]
Region 2: I/O ports at 2140 [size=8]
Region 3: I/O ports at 2158 [size=4]
 Region 4: I/O ports at 2060 [size=16]
Region 5: I/O ports at ffe0 [size=16]
Capabilities: [70] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
 AFStatus: TP-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus
Controller (rev 05)
 Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
 Region 0: Memory at a0907000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57765
Gigabit Ethernet PCIe (rev 10)
Subsystem: Broadcom Corporation NetXtreme BCM57765 Gigabit Ethernet PCIe
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0400000 (64-bit, prefetchable) [size=64K]
 Region 2: Memory at a0410000 (64-bit, prefetchable) [size=64K]
Capabilities: [48] Power Management version 3
 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=6 Masked-
 Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00000120
Capabilities: [ac] Express (v2) Endpoint, MSI 00
 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
 MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Device Serial Number 00-00-3c-07-54-52-c0-d1
 Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: tg3

02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory
Card Reader (rev 10) (prog-if 01)
Subsystem: Broadcom Corporation Device 0000
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at a0420000 (64-bit, prefetchable) [size=64K]
 Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
 ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1
<64us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable
De-emphasis: -6dB
 Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
 Compliance De-emphasis: -6dB
 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
 CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [150 v1] Power Budgeting <?>
 Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Kernel driver in use: sdhci-pci

03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev
02)
Subsystem: Apple Inc. Device 00e4
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 17
Region 0: Memory at a0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
 ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
 RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1
<64us
ClockPM+ Surprise- LLActRep+ BwNot-
 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
 Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
 Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
 Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
 Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 87-7d-6d-ff-ff-57-68-a8
 Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: bcma-pci-bridge

04:00.0 PCI bridge: Texas Instruments XIO2213A/B/XIO2221 PCI Express to PCI
Bridge [Cheetah Express] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a0500000-a05fffff
 Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
 Address: 0000000000000000  Data: 0000
Capabilities: [80] Subsystem: Device 0000:0000
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
 MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <16us
ClockPM+ Surprise- LLActRep- BwNot-
 LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
 UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP-
ECRC- UnsupReq- ACSViol-
 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+
ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
 CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

05:00.0 FireWire (IEEE 1394): Texas Instruments XIO2213A/B/XIO2221
IEEE-1394b OHCI Controller [Cheetah Express] (rev 01) (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 18
Region 0: Memory at a0504000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at a0500000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: Hitachi HTS54505 Rev: PB4A
  Type:   Direct-Access                    ANSI  SCSI revision: 05

(Apologies to the kernel devs for any useless crap/long reading, I'm just
following the guide to reporting a proper bug for you from
https://wiki.ubuntu.com/Bugs/Upstream/kernel )

Re:

[Rafał Miłecki]

2013/4/12 Callum Hutchinson <callumhutchinson1@gmail.com>:
> Tried to report this properly via email but got some formatting issues
> coming back, I've attached the content of the original email report as
> 'Report.txt'.
>
> It is the same file as found on comment 12 on Launchpad bug.
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1142385
>
> Apologies for any missing information or lack of reporting experience :)

Sending e-mail with empty subject and without direct information about
the hardware isn't a good idea.

It's most probably another result of regression I've tracked and reported in:
Scanning regression since "cfg80211: use DS or HT operation IEs to
determine BSS channel"

http://www.spinics.net/lists/linux-wireless/msg105359.html
http://marc.info/?t=136431795000003&r=1&w=4

I didn't have enough time to debug it further and fix yet.

-- 
Rafał

(no subject)

[Johannes Berg]

These patches improve/fix HT handling, particularly the bandwidth
change handling that we were missing entirely and HT capability
handling (which touches many drivers, unfortunately.)

This should make the VHT handling compliant with D4.0, I hope.

johannes

Re:

[Johannes Berg]

On Mon, 2013-02-11 at 13:38 +0100, Johannes Berg wrote:
> These patches improve/fix HT handling, particularly the bandwidth
> change handling that we were missing entirely and HT capability
> handling (which touches many drivers, unfortunately.)
> 
> This should make the VHT handling compliant with D4.0, I hope.

I did a little bit more testing and applied all.

johannes

(no subject)

[Vlatka Petričec]

Hi,
I have linux evolution  and I had a normal wireless connection until
something changed in maybe network settings and it just stopped
working. for example it says that my network is active but I cannot
open any web adress or is just active but every function on computer
says it is not active. I am thanking you in advance thank you for your
time.

Re:

[Larry Finger]

On 02/22/2012 12:50 AM, Vlatka Petričec wrote:
> Hi,
> I have linux evolution  and I had a normal wireless connection until
> something changed in maybe network settings and it just stopped
> working. for example it says that my network is active but I cannot
> open any web adress or is just active but every function on computer
> says it is not active. I am thanking you in advance thank you for your
> time.

Vlatka,

I have some suggestions for you.

First, never submit an E-mail to anyone, and especially to a mailing list 
without a subject that is a good description of your problem. Most experts will 
have their mail filters set up to direct a subject-less message directly to the 
spam bucket. I think I need to do that too.

Second, you give no information that would let anyone help you. "It just stopped 
working" does no good. Knowing what changed is critical. If the kernel changed 
when it stopped, then this list might be the right place to ask. If something 
was updated by the distro, then get your help there as very few of us would know 
how evolution works. if nothing changed, then your settings just got corrupted, 
and you definitely need to contact the support at evolution.

If you think that it is a kernel or driver problem, then you absolutely must 
state what hardware you have, what driver it uses, and the PCI or USB ID that 
describes it. You also need to state what kernel works, and what version fails.

Larry

(no subject)

[Naveen Singh]

From: Naveen Singh <nsingh@atheros.com>

The WPA-PSK association was not going through with 2.6.38
kernel. It was found that supplicant was not able to set
the PTK key. On further analysis it was found that the function
nl80211_set_key in file net/wireless/nl80211.c is returning with
code as -EOPNOTSUPP. This function has been modified to check for
the flag "WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS"in wiphy
struct. If this flag is not set in the driver init, it returns
from here thereby causing the association to fail. The solution
is to set this flag in driver init as there would be separate
default keys for unicast and multicast packets.

Signed-off-by: Naveen Singh <nsingh@atheros.com>
---
 drivers/staging/ath6kl/os/linux/cfg80211.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
index e87d3aa..ec22408 100644
--- a/drivers/staging/ath6kl/os/linux/cfg80211.c
+++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
@@ -1455,6 +1455,11 @@ ar6k_cfg80211_init(struct device *dev)
     wdev->wiphy->cipher_suites = cipher_suites;
     wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
 
+    /*Support the seprate keys for unicast and multicast packets
+     *This flag is needed because because nl80211 checks for this
+     *flag before calling cfg ops for setting the key.*/
+    wdev->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
+
     ret = wiphy_register(wdev->wiphy);
     if(ret < 0) {
         AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
-- 
1.7.0.4

Re:

[Johannes Berg]

On Sat, 2011-04-30 at 19:30 -0700, Naveen Singh wrote:
> From: Naveen Singh <nsingh@atheros.com>
> 
> The WPA-PSK association was not going through with 2.6.38
> kernel. It was found that supplicant was not able to set
> the PTK key. On further analysis it was found that the function
> nl80211_set_key in file net/wireless/nl80211.c is returning with
> code as -EOPNOTSUPP. This function has been modified to check for
> the flag "WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS"in wiphy
> struct. If this flag is not set in the driver init, it returns
> from here thereby causing the association to fail. The solution
> is to set this flag in driver init as there would be separate
> default keys for unicast and multicast packets.

We were discussing this before ... and I think the bug is in the
supplicant actually asking for the GTK to be set as the default key or
something like that.

In any case, this doesn't seem right unless you actually do support
separate unicast keys. Are you sure you fully understand what you're
doing here, and not just randomly hacking in a workaround?

johannes

Re:

[Luis R. Rodriguez]

eek sorry, forgot the sha1sum on git format-patch :)

On Mon, May 10, 2010 at 12:22 PM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

(no subject)

[Vasil Lalov]

Hello,

I am seeing some weird behavior with the iwlagn driver from linuxwireless.com:

My Intel 5300 wireless card will randomly disassociate itself from the
access point. It happens with or without security enabled. It only
happens when using the 802.11n mode. I've noticed that the further
away I am from the AP, the LOWER the chances of this to happen. If I
put my laptop within 2-3 feet from the access point, the wireless card
will disassociate itself on average once every 30 seconds.

Here is some data:

uname -a
Linux red 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:02:26 UTC 2010
x86_64 GNU/Linux

filename:
/lib/modules/2.6.31-20-generic/updates/drivers/net/wireless/iwlwifi/iwlagn.ko
alias:          iwl4965
license:        GPL
author:         Copyright(c) 2003-2010 Intel Corporation <ilw@linux.intel.com>
version:        in-tree:
description:    Intel(R) Wireless WiFi Link AGN driver for Linux
firmware:       iwlwifi-4965-2.ucode
firmware:       iwlwifi-5150-2.ucode
firmware:       iwlwifi-5000-2.ucode
firmware:       iwlwifi-6050-4.ucode
firmware:       iwlwifi-6000-4.ucode
firmware:       iwlwifi-1000-3.ucode
srcversion:     10AEF71B7C48925A15AC101
alias:          pci:v00008086d00000084sv*sd00001316bc*sc*i*
alias:          pci:v00008086d00000084sv*sd00001216bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001326bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001226bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001306bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001206bc*sc*i*
alias:          pci:v00008086d00000084sv*sd00001315bc*sc*i*
alias:          pci:v00008086d00000084sv*sd00001215bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001325bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001225bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001305bc*sc*i*
alias:          pci:v00008086d00000083sv*sd00001205bc*sc*i*
alias:          pci:v00008086d00000089sv*sd00001316bc*sc*i*
alias:          pci:v00008086d00000089sv*sd00001311bc*sc*i*
alias:          pci:v00008086d00000087sv*sd00001326bc*sc*i*
alias:          pci:v00008086d00000087sv*sd00001321bc*sc*i*
alias:          pci:v00008086d00000087sv*sd00001306bc*sc*i*
alias:          pci:v00008086d00000087sv*sd00001301bc*sc*i*
alias:          pci:v00008086d00004239sv*sd00001316bc*sc*i*
alias:          pci:v00008086d00004239sv*sd00001311bc*sc*i*
alias:          pci:v00008086d00004238sv*sd00001111bc*sc*i*
alias:          pci:v00008086d0000422Csv*sd00001326bc*sc*i*
alias:          pci:v00008086d0000422Csv*sd00001321bc*sc*i*
alias:          pci:v00008086d0000422Csv*sd00001307bc*sc*i*
alias:          pci:v00008086d0000422Csv*sd00001306bc*sc*i*
alias:          pci:v00008086d0000422Csv*sd00001301bc*sc*i*
alias:          pci:v00008086d0000422Bsv*sd00001121bc*sc*i*
alias:          pci:v00008086d0000422Bsv*sd00001101bc*sc*i*
alias:          pci:v00008086d0000423Dsv*sd00001316bc*sc*i*
alias:          pci:v00008086d0000423Dsv*sd00001216bc*sc*i*
alias:          pci:v00008086d0000423Dsv*sd00001311bc*sc*i*
alias:          pci:v00008086d0000423Dsv*sd00001211bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001321bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001221bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001306bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001206bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001301bc*sc*i*
alias:          pci:v00008086d0000423Csv*sd00001201bc*sc*i*
alias:          pci:v00008086d0000423Bsv*sd00001011bc*sc*i*
alias:          pci:v00008086d0000423Asv*sd00001021bc*sc*i*
alias:          pci:v00008086d0000423Asv*sd00001001bc*sc*i*
alias:          pci:v00008086d00004236sv*sd00001114bc*sc*i*
alias:          pci:v00008086d00004236sv*sd00001014bc*sc*i*
alias:          pci:v00008086d00004236sv*sd00001111bc*sc*i*
alias:          pci:v00008086d00004236sv*sd00001011bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001104bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001004bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001101bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001001bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001124bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001024bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001121bc*sc*i*
alias:          pci:v00008086d00004235sv*sd00001021bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001316bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001216bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001315bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001215bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001314bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001214bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001311bc*sc*i*
alias:          pci:v00008086d00004237sv*sd00001211bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001326bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001226bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001325bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001225bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001324bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001224bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001321bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001221bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001306bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001206bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001305bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001205bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001304bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001204bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001301bc*sc*i*
alias:          pci:v00008086d00004232sv*sd00001201bc*sc*i*
alias:          pci:v00008086d00004230sv*sd*bc*sc*i*
alias:          pci:v00008086d00004229sv*sd*bc*sc*i*
depends:        iwlcore,mac80211,compat_firmware_class,cfg80211
vermagic:       2.6.31-20-generic SMP mod_unload modversions
parm:           swcrypto50:using software crypto engine (default 0 [hardware])
 (bool)
parm:           queues_num50:number of hw queues in 50xx series (int)
parm:           11n_disable50:disable 50XX 11n functionality (int)
parm:           amsdu_size_8K50:enable 8K amsdu size in 50XX series (int)
parm:           fw_restart50:restart firmware in case of error (int)
parm:           antenna:select antenna (1=Main, 2=Aux, default 0 [both]) (int)
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           disable_hw_scan:disable hardware scanning (default 0) (int)
parm:           queues_num:number of hw queues. (int)
parm:           11n_disable:disable 11n functionality (int)
parm:           amsdu_size_8K:enable 8K amsdu size (int)
parm:           fw_restart4965:restart firmware in case of error (int)


The error messages in dmesg:

iwlagn 0000:0c:00.0: Microcode SW error detected.  Restarting 0x2000000.
[40595.037808] iwlagn 0000:0c:00.0: Start IWL Error Log Dump:
[40595.037814] iwlagn 0000:0c:00.0: Status: 0x000212E4, count: 5
[40595.037945] iwlagn 0000:0c:00.0: Desc
Time       data1      data2      line
[40595.037954] iwlagn 0000:0c:00.0: NMI_INTERRUPT_WDG            (#04)
3570070946 0x00000002 0x07030000 3664
[40595.037960] iwlagn 0000:0c:00.0: blink1  blink2  ilink1  ilink2
[40595.037966] iwlagn 0000:0c:00.0: 0x005AA 0x006E8 0x008B2 0x02294
[40595.037972] iwlagn 0000:0c:00.0: CSR values:
[40595.037976] iwlagn 0000:0c:00.0: (2nd byte of CSR_INT_COALESCING is
CSR_INT_PERIODIC_REG)
[40595.037986] iwlagn 0000:0c:00.0:        CSR_HW_IF_CONFIG_REG: 0X00480301
[40595.037994] iwlagn 0000:0c:00.0:          CSR_INT_COALESCING: 0X00000040
[40595.038003] iwlagn 0000:0c:00.0:                     CSR_INT: 0X04000000
[40595.038012] iwlagn 0000:0c:00.0:                CSR_INT_MASK: 0X00000000
[40595.038020] iwlagn 0000:0c:00.0:           CSR_FH_INT_STATUS: 0X00000000
[40595.038029] iwlagn 0000:0c:00.0:                 CSR_GPIO_IN: 0X00000000
[40595.038037] iwlagn 0000:0c:00.0:                   CSR_RESET: 0X00000000
[40595.038046] iwlagn 0000:0c:00.0:                CSR_GP_CNTRL: 0X080403c5
[40595.038054] iwlagn 0000:0c:00.0:                  CSR_HW_REV: 0X00000024
[40595.038062] iwlagn 0000:0c:00.0:              CSR_EEPROM_REG: 0X00000000
[40595.038071] iwlagn 0000:0c:00.0:               CSR_EEPROM_GP: 0X90000004
[40595.038079] iwlagn 0000:0c:00.0:              CSR_OTP_GP_REG: 0X00060000
[40595.038088] iwlagn 0000:0c:00.0:                 CSR_GIO_REG: 0X00080046
[40595.038096] iwlagn 0000:0c:00.0:            CSR_GP_UCODE_REG: 0X00004547
[40595.038104] iwlagn 0000:0c:00.0:           CSR_GP_DRIVER_REG: 0X00000000
[40595.038112] iwlagn 0000:0c:00.0:           CSR_UCODE_DRV_GP1: 0X00000000
[40595.038121] iwlagn 0000:0c:00.0:           CSR_UCODE_DRV_GP2: 0X00000000
[40595.038129] iwlagn 0000:0c:00.0:                 CSR_LED_REG: 0X00000058
[40595.038138] iwlagn 0000:0c:00.0:        CSR_DRAM_INT_TBL_REG: 0X88110576
[40595.038146] iwlagn 0000:0c:00.0:        CSR_GIO_CHICKEN_BITS: 0X27800200
[40595.038154] iwlagn 0000:0c:00.0:             CSR_ANA_PLL_CFG: 0X00880300
[40595.038163] iwlagn 0000:0c:00.0:           CSR_HW_REV_WA_REG: 0X0001001a
[40595.038171] iwlagn 0000:0c:00.0:        CSR_DBG_HPET_MEM_REG: 0Xffff0000
[40595.038176] iwlagn 0000:0c:00.0: FH register values:
[40595.038194] iwlagn 0000:0c:00.0:
FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X1100a800
[40595.038212] iwlagn 0000:0c:00.0:
FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X01105640
[40595.038231] iwlagn 0000:0c:00.0:
FH_RSCSR_CHNL0_WPTR: 0X00000078
[40595.038249] iwlagn 0000:0c:00.0:
FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819104
[40595.038267] iwlagn 0000:0c:00.0:
FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
[40595.038286] iwlagn 0000:0c:00.0:
FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
[40595.038304] iwlagn 0000:0c:00.0:
FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
[40595.038322] iwlagn 0000:0c:00.0:
FH_TSSR_TX_STATUS_REG: 0X07ff0001
[40595.038340] iwlagn 0000:0c:00.0:
FH_TSSR_TX_ERROR_REG: 0X00000000
[40595.038402] iwlagn 0000:0c:00.0: Start IWL Event Log Dump: display
last 20 entries
[40595.038426] iwlagn 0000:0c:00.0: EVT_LOGT:2749976970:0x0000010f:0106
[40595.038441] iwlagn 0000:0c:00.0: EVT_LOGT:2749976972:0x00000000:0301
[40595.038456] iwlagn 0000:0c:00.0: EVT_LOGT:2749977046:0x00000261:0353
[40595.038471] iwlagn 0000:0c:00.0: EVT_LOGT:2749977367:0x0000010f:0106
[40595.038485] iwlagn 0000:0c:00.0: EVT_LOGT:2749977369:0x00000000:0302
[40595.038500] iwlagn 0000:0c:00.0: EVT_LOGT:2749977395:0x00000436:0323
[40595.038515] iwlagn 0000:0c:00.0: EVT_LOGT:2749977417:0x00000000:1350
[40595.038530] iwlagn 0000:0c:00.0: EVT_LOGT:2749977418:0x00000000:1351
[40595.038545] iwlagn 0000:0c:00.0: EVT_LOGT:2749977418:0x00000001:1352
[40595.038559] iwlagn 0000:0c:00.0: EVT_LOGT:2749977419:0x00000002:1353
[40595.038575] iwlagn 0000:0c:00.0: EVT_LOGT:2749977474:0x000000d4:0322
[40595.038590] iwlagn 0000:0c:00.0: EVT_LOGT:2749977641:0x0000010f:0106
[40595.038604] iwlagn 0000:0c:00.0: EVT_LOGT:2749977642:0x00000000:0302
[40595.038619] iwlagn 0000:0c:00.0: EVT_LOGT:2749977668:0x00000436:0323
[40595.038634] iwlagn 0000:0c:00.0: EVT_LOGT:2749977690:0x00000000:1350
[40595.038649] iwlagn 0000:0c:00.0: EVT_LOGT:2749977690:0x00000000:1351
[40595.038664] iwlagn 0000:0c:00.0: EVT_LOGT:2749977691:0x00000001:1352
[40595.038678] iwlagn 0000:0c:00.0: EVT_LOGT:2749977691:0x00000002:1353
[40595.038693] iwlagn 0000:0c:00.0: EVT_LOGT:2750177633:0x000000d7:0123
[40595.038708] iwlagn 0000:0c:00.0: EVT_LOGT:2750177641:0x00000000:0125
[40595.101312] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
[40595.101318] iwlagn 0000:0c:00.0: queue number out of range: 0, must
be 10 to 19
[40595.101340] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
[40595.101343] iwlagn 0000:0c:00.0: queue number out of range: 0, must
be 10 to 19
[40595.146001] iwlagn 0000:0c:00.0: iwl_tx_agg_start on ra =
00:26:5a:f5:73:3a tid = 0
[40600.324551] iwlagn 0000:0c:00.0: iwl_tx_agg_start on ra =
00:26:5a:f5:73:3a tid = 0
[40600.540126] No probe response from AP 00:26:5a:f5:73:3a after
500ms, disconnecting.
[40600.572606] mac80211-phy0: failed to remove key (0,
00:26:5a:f5:73:3a) from hardware (-22)
[40600.640467] cfg80211: All devices are disconnected, going to
restore regulatory settings
[40600.640481] cfg80211: Restoring regulatory settings
[40600.640489] cfg80211: Calling CRDA to update world regulatory domain
[40600.653155] cfg80211: World regulatory domain updated:
[40600.653163]     (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[40600.653170]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[40600.653177]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[40600.653183]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[40600.653190]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[40600.653196]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[40620.132020] wlan0: authenticate with 00:26:5a:f5:73:3a (try 1)
[40620.137290] wlan0: authenticated
[40620.137341] wlan0: associate with 00:26:5a:f5:73:3a (try 1)
[40620.142828] wlan0: RX AssocResp from 00:26:5a:f5:73:3a (capab=0x431
status=0 aid=1)
[40620.142832] wlan0: associated
[40622.631049] iwlagn 0000:0c:00.0: iwl_tx_agg_start on ra =
00:26:5a:f5:73:3a tid = 0


Any suggestions?

Re:

[reinette chatre]

On Wed, 2010-03-17 at 06:13 -0700, Vasil Lalov wrote:

> The error messages in dmesg:
> 
> iwlagn 0000:0c:00.0: Microcode SW error detected.  Restarting 0x2000000.
> [40595.037808] iwlagn 0000:0c:00.0: Start IWL Error Log Dump:
> [40595.037814] iwlagn 0000:0c:00.0: Status: 0x000212E4, count: 5
> [40595.037945] iwlagn 0000:0c:00.0: Desc
> Time       data1      data2      line
> [40595.037954] iwlagn 0000:0c:00.0: NMI_INTERRUPT_WDG            (#04)
> 3570070946 0x00000002 0x07030000 3664

[...]

> [40595.101312] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
> [40595.101318] iwlagn 0000:0c:00.0: queue number out of range: 0, must
> be 10 to 19
> [40595.101340] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
> [40595.101343] iwlagn 0000:0c:00.0: queue number out of range: 0, must
> be 10 to 19

This looks similar to https://bugzilla.kernel.org/show_bug.cgi?id=15374
- could you please update your kernel to 2.6.33 and try the patches
attached to that bug report?

Reinette

Re:

[Vasil Lalov]

Reinett,

Thanks for responding to this. I also noticed other things. It seems
that this Microcode SW error occurs because the wifi card is
overheating. When used in n-mode and there is a large file transfer,
the temperature of the card rises to over 62C. Soon after this, the
microcode error occurs and the card gets disassociated.

Doing more research on the power vs temperature problem, I discovered
that other users are seeing this as well. Some have solved their
problem by enabling the power management for the wifi card by issuing

iwconfig wlan0 power on

Others, completely disabled the power management and forced a fixed,
lower power level by issuing

 echo 8 > /sys/bus/pci/drivers/iwlagn/0000\:06\:00.0/power_level

Also, what I have noticed is that if I have my laptop very very close
to the Access Point (1-3 feet) then this error is more likely to
happen. If I move the laptop further away, say more than 15-20 feet,
this error stops occurring so frequently.

Unfortunately, I cannot upgrade to 2.6.33 kernel as it is currently
not available for my distribution and I am reluctant to recompile my
own kernel.

Vasil

===
Vasil Lalov
Sr. Systems Manager
Chicago Public Library


On Fri, Mar 19, 2010 at 1:05 AM, reinette chatre
<reinette.chatre@intel.com> wrote:
> On Wed, 2010-03-17 at 06:13 -0700, Vasil Lalov wrote:
>
>> The error messages in dmesg:
>>
>> iwlagn 0000:0c:00.0: Microcode SW error detected.  Restarting 0x2000000.
>> [40595.037808] iwlagn 0000:0c:00.0: Start IWL Error Log Dump:
>> [40595.037814] iwlagn 0000:0c:00.0: Status: 0x000212E4, count: 5
>> [40595.037945] iwlagn 0000:0c:00.0: Desc
>> Time       data1      data2      line
>> [40595.037954] iwlagn 0000:0c:00.0: NMI_INTERRUPT_WDG            (#04)
>> 3570070946 0x00000002 0x07030000 3664
>
> [...]
>
>> [40595.101312] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
>> [40595.101318] iwlagn 0000:0c:00.0: queue number out of range: 0, must
>> be 10 to 19
>> [40595.101340] iwlagn 0000:0c:00.0: Stopping AGG while state not ON or starting
>> [40595.101343] iwlagn 0000:0c:00.0: queue number out of range: 0, must
>> be 10 to 19
>
> This looks similar to https://bugzilla.kernel.org/show_bug.cgi?id=15374
> - could you please update your kernel to 2.6.33 and try the patches
> attached to that bug report?
>
> Reinette
>
>
>

Re: Re:

[reinette chatre]

On Fri, 2010-03-19 at 09:49 -0700, Vasil Lalov wrote:
> Thanks for responding to this. I also noticed other things. It seems
> that this Microcode SW error occurs because the wifi card is
> overheating. When used in n-mode and there is a large file transfer,
> the temperature of the card rises to over 62C. Soon after this, the
> microcode error occurs and the card gets disassociated.
> 
> Doing more research on the power vs temperature problem, I discovered
> that other users are seeing this as well. Some have solved their
> problem by enabling the power management for the wifi card by issuing

I am not familiar with these workarounds. Could you please submit a new
bug at http://bugzilla.intellinuxwireless.org/ or add your information
to a bug in this system if you find one that is related? 

Reinette

Re: Re:

[Vasil Lalov]

Reinette,

Thanks a lot for directing me to the right place. I will open up a new
bugreport right away!
Have a good weekend!

Vasil
===
Vasil Lalov
Sr. Systems Administrator
Chicago Public Library


On Fri, Mar 19, 2010 at 12:10 PM, reinette chatre
<reinette.chatre@intel.com> wrote:
> On Fri, 2010-03-19 at 09:49 -0700, Vasil Lalov wrote:
>> Thanks for responding to this. I also noticed other things. It seems
>> that this Microcode SW error occurs because the wifi card is
>> overheating. When used in n-mode and there is a large file transfer,
>> the temperature of the card rises to over 62C. Soon after this, the
>> microcode error occurs and the card gets disassociated.
>>
>> Doing more research on the power vs temperature problem, I discovered
>> that other users are seeing this as well. Some have solved their
>> problem by enabling the power management for the wifi card by issuing
>
> I am not familiar with these workarounds. Could you please submit a new
> bug at http://bugzilla.intellinuxwireless.org/ or add your information
> to a bug in this system if you find one that is related?
>
> Reinette
>
>
>
>

(no subject)

[Thijs van der Kraan]

The zd1211rw does not work with the Shuttle PN15G (D-Link Corp. WL54).
After the driver fails it also break the device for my windows XP
install.
To get it back in working order I have to physically re-plug it while
windows is running, this is pretty annoying as the PN15G is meant to be,
and is, built inside my shuttle box.

I tried another device that uses the same driver, the ZyAIR G-220, and
it works like a charm.

- Is there a way to get the Shuttle PN15G working ?
- Can prevent the driver from breaking my device, so it will remain
working under windows XP.


Thijs van de Kraan


lsusb:
---------------
Bus 001 Device 004: ID 0586:3401 ZyXEL Communications Corp. ZyAIR G-220
Bus 001 Device 003: ID 07b8:6001 D-Link Corp. WL54
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd 
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
---------------

dmesg (Shuttle PN15G):
---------------
[    9.419022] zd1211rw 1-8:1.0: phy0
[    9.419050] usbcore: registered new interface driver zd1211rw
[   11.618783] usb 1-8: firmware: requesting zd1211/zd1211b_ub
[   11.979913] usb 1-8: firmware version 0x4810 and device bootcode
version 0x4721 differ
[   11.979919] usb 1-8: firmware: requesting zd1211/zd1211b_ur
[   12.184918] usb 1-8: firmware: requesting zd1211/zd1211b_uphr
[   12.261522] zd1211rw 1-8:1.0: RF2959 is currently not supported for
ZD1211B devices
[   12.263744] eth0: link down
[   12.263950] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.491044] usb 1-8: firmware: requesting zd1211/zd1211b_ub
[   14.496834] usb 1-8: firmware version 0x4810 and device bootcode
version 0x4721 differ
[   14.496841] usb 1-8: firmware: requesting zd1211/zd1211b_ur
[   15.526035] usb 1-8: USB control request for firmware upload failed.
Error number -110
[   15.526049] zd1211rw 1-8:1.0: couldn't load firmware. Error number
-110

dmesg (ZyAIR G-220):
---------------

[  283.920025] usb 1-4: new high speed USB device using ehci_hcd and
address 4
[  284.070953] usb 1-4: configuration #1 chosen from 1 choice
[  284.200081] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[  284.351553] phy1: Selected rate control algorithm 'minstrel'
[  284.352966] zd1211rw 1-4:1.0: phy1
[  284.387607] usb 1-4: firmware: requesting zd1211/zd1211_ub
[  284.422786] usb 1-4: firmware version 0x4330 and device bootcode
version 0x4810 differ
[  284.422796] usb 1-4: firmware: requesting zd1211/zd1211_ur
[  284.446550] usb 1-4: firmware: requesting zd1211/zd1211_uphr
[  284.528039] zd1211rw 1-4:1.0: firmware version 4605
[  284.568044] zd1211rw 1-4:1.0: zd1211 chip 0586:3401 v4810 high
00-13-49 AL2230_RF pa0 -----
[  284.570691] cfg80211: Calling CRDA for country: DE
[  284.574176] cfg80211: Regulatory domain changed to country: DE
[  284.574184] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[  284.574190] 	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  284.574195] 	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  284.574200] 	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[  284.589627] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  291.145078] wlan1: authenticate with AP 00:21:29:8b:3a:49
[  291.146703] wlan1: authenticated
[  291.146708] wlan1: associate with AP 00:21:29:8b:3a:49
[  291.148944] wlan1: RX AssocResp from 00:21:29:8b:3a:49 (capab=0x411
status=0 aid=2)
[  291.148950] wlan1: associated
[  291.149928] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  301.720021] wlan1: no IPv6 routers present

Re:

[Gábor Stefanik]

On Sat, Mar 13, 2010 at 5:33 PM, Thijs van der Kraan
<thijsvanderkraan@telfort.nl> wrote:
> The zd1211rw does not work with the Shuttle PN15G (D-Link Corp. WL54).
> After the driver fails it also break the device for my windows XP
> install.
> To get it back in working order I have to physically re-plug it while
> windows is running, this is pretty annoying as the PN15G is meant to be,
> and is, built inside my shuttle box.
>
> I tried another device that uses the same driver, the ZyAIR G-220, and
> it works like a charm.
>
> - Is there a way to get the Shuttle PN15G working ?
> - Can prevent the driver from breaking my device, so it will remain
> working under windows XP.
>
>
> Thijs van de Kraan
>
>
> lsusb:
> ---------------
> Bus 001 Device 004: ID 0586:3401 ZyXEL Communications Corp. ZyAIR G-220
> Bus 001 Device 003: ID 07b8:6001 D-Link Corp. WL54
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> ---------------
>
> dmesg (Shuttle PN15G):
> ---------------
> [    9.419022] zd1211rw 1-8:1.0: phy0
> [    9.419050] usbcore: registered new interface driver zd1211rw
> [   11.618783] usb 1-8: firmware: requesting zd1211/zd1211b_ub
> [   11.979913] usb 1-8: firmware version 0x4810 and device bootcode
> version 0x4721 differ
> [   11.979919] usb 1-8: firmware: requesting zd1211/zd1211b_ur
> [   12.184918] usb 1-8: firmware: requesting zd1211/zd1211b_uphr
> [   12.261522] zd1211rw 1-8:1.0: RF2959 is currently not supported for
> ZD1211B devices

Are you sure this is a ZD1211B, not a regular ZD1211? Try changing the
USB ID definitions to mark this as a ZD1211.

> [   12.263744] eth0: link down
> [   12.263950] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   14.491044] usb 1-8: firmware: requesting zd1211/zd1211b_ub
> [   14.496834] usb 1-8: firmware version 0x4810 and device bootcode
> version 0x4721 differ
> [   14.496841] usb 1-8: firmware: requesting zd1211/zd1211b_ur
> [   15.526035] usb 1-8: USB control request for firmware upload failed.
> Error number -110
> [   15.526049] zd1211rw 1-8:1.0: couldn't load firmware. Error number
> -110
>
> dmesg (ZyAIR G-220):
> ---------------
>
> [  283.920025] usb 1-4: new high speed USB device using ehci_hcd and
> address 4
> [  284.070953] usb 1-4: configuration #1 chosen from 1 choice
> [  284.200081] usb 1-4: reset high speed USB device using ehci_hcd and
> address 4
> [  284.351553] phy1: Selected rate control algorithm 'minstrel'
> [  284.352966] zd1211rw 1-4:1.0: phy1
> [  284.387607] usb 1-4: firmware: requesting zd1211/zd1211_ub
> [  284.422786] usb 1-4: firmware version 0x4330 and device bootcode
> version 0x4810 differ
> [  284.422796] usb 1-4: firmware: requesting zd1211/zd1211_ur
> [  284.446550] usb 1-4: firmware: requesting zd1211/zd1211_uphr
> [  284.528039] zd1211rw 1-4:1.0: firmware version 4605
> [  284.568044] zd1211rw 1-4:1.0: zd1211 chip 0586:3401 v4810 high
> 00-13-49 AL2230_RF pa0 -----
> [  284.570691] cfg80211: Calling CRDA for country: DE
> [  284.574176] cfg80211: Regulatory domain changed to country: DE
> [  284.574184]  (start_freq - end_freq @ bandwidth), (max_antenna_gain,
> max_eirp)
> [  284.574190]  (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
> [  284.574195]  (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> [  284.574200]  (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
> [  284.589627] ADDRCONF(NETDEV_UP): wlan1: link is not ready
> [  291.145078] wlan1: authenticate with AP 00:21:29:8b:3a:49
> [  291.146703] wlan1: authenticated
> [  291.146708] wlan1: associate with AP 00:21:29:8b:3a:49
> [  291.148944] wlan1: RX AssocResp from 00:21:29:8b:3a:49 (capab=0x411
> status=0 aid=2)
> [  291.148950] wlan1: associated
> [  291.149928] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
> [  301.720021] wlan1: no IPv6 routers present
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)

(no subject)

[Janakiram Sistla]

From: Janakiram Sistla <janakiram.sistla@gmail.com>

Adding radio type FM in RFKILL_TYPE_.FM belongs to
same class of with both TX/RX capability

Signed-off-by: Janakiram Sistla <janakiram.sistla@gmail.com>
---
 include/linux/rfkill.h |    2 ++
 net/rfkill/core.c      |    2 ++
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 3392c59..7ae75ef 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -35,6 +35,7 @@
  * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
  * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
  * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_FM: switch is on a wireless FM device.
  * @NUM_RFKILL_TYPES: number of defined rfkill types
  */
 enum rfkill_type {
@@ -44,6 +45,7 @@ enum rfkill_type {
 	RFKILL_TYPE_UWB,
 	RFKILL_TYPE_WIMAX,
 	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_FM,
 	RFKILL_TYPE_GPS,
 	NUM_RFKILL_TYPES,
 };
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index ba2efb9..61b716e 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -590,6 +590,8 @@ static const char *rfkill_get_type_str(enum rfkill_type type)
 		return "wimax";
 	case RFKILL_TYPE_WWAN:
 		return "wwan";
+	case RFKILL_TYPE_FM:
+		return "fm";
 	case RFKILL_TYPE_GPS:
 		return "gps";
 	default:
-- 
1.5.4.3

Re:

[Janakiram Sistla]

I will be resending this patch ...sorry subjet line missing in this
sorry about that

Regards,
Ram.
On Wed, Nov 18, 2009 at 7:20 AM, Janakiram Sistla
<janakiram.sistla@gmail.com> wrote:
> From: Janakiram Sistla <janakiram.sistla@gmail.com>
>
> Adding radio type FM in RFKILL_TYPE_.FM belongs to
> same class of with both TX/RX capability
>
> Signed-off-by: Janakiram Sistla <janakiram.sistla@gmail.com>
> ---
>  include/linux/rfkill.h |    2 ++
>  net/rfkill/core.c      |    2 ++
>  2 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
> index 3392c59..7ae75ef 100644
> --- a/include/linux/rfkill.h
> +++ b/include/linux/rfkill.h
> @@ -35,6 +35,7 @@
>  * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
>  * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
>  * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
> + * @RFKILL_TYPE_FM: switch is on a wireless FM device.
>  * @NUM_RFKILL_TYPES: number of defined rfkill types
>  */
>  enum rfkill_type {
> @@ -44,6 +45,7 @@ enum rfkill_type {
>        RFKILL_TYPE_UWB,
>        RFKILL_TYPE_WIMAX,
>        RFKILL_TYPE_WWAN,
> +       RFKILL_TYPE_FM,
>        RFKILL_TYPE_GPS,
>        NUM_RFKILL_TYPES,
>  };
> diff --git a/net/rfkill/core.c b/net/rfkill/core.c
> index ba2efb9..61b716e 100644
> --- a/net/rfkill/core.c
> +++ b/net/rfkill/core.c
> @@ -590,6 +590,8 @@ static const char *rfkill_get_type_str(enum rfkill_type type)
>                return "wimax";
>        case RFKILL_TYPE_WWAN:
>                return "wwan";
> +       case RFKILL_TYPE_FM:
> +               return "fm";
>        case RFKILL_TYPE_GPS:
>                return "gps";
>        default:
> --
> 1.5.4.3
>
>

Re:

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 979 bytes --]

On Wed, 2009-11-18 at 07:20 +0530, Janakiram Sistla wrote:

> ---
>  include/linux/rfkill.h |    2 ++
>  net/rfkill/core.c      |    2 ++
>  2 files changed, 4 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
> index 3392c59..7ae75ef 100644
> --- a/include/linux/rfkill.h
> +++ b/include/linux/rfkill.h
> @@ -35,6 +35,7 @@
>   * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
>   * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
>   * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
> + * @RFKILL_TYPE_FM: switch is on a wireless FM device.
>   * @NUM_RFKILL_TYPES: number of defined rfkill types
>   */
>  enum rfkill_type {
> @@ -44,6 +45,7 @@ enum rfkill_type {
>  	RFKILL_TYPE_UWB,
>  	RFKILL_TYPE_WIMAX,
>  	RFKILL_TYPE_WWAN,
> +	RFKILL_TYPE_FM,
>  	RFKILL_TYPE_GPS,
>  	NUM_RFKILL_TYPES,
>  };

Nice try, but no fly. This struct is ABI, you cannot add in the middle.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

Re:

[Janakiram Sistla]

On Wed, Nov 18, 2009 at 4:23 PM, Johannes Berg
<johannes@sipsolutions.net> wrote:
> On Wed, 2009-11-18 at 07:20 +0530, Janakiram Sistla wrote:
>
>> ---
>>  include/linux/rfkill.h |    2 ++
>>  net/rfkill/core.c      |    2 ++
>>  2 files changed, 4 insertions(+), 0 deletions(-)
>>
>> diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
>> index 3392c59..7ae75ef 100644
>> --- a/include/linux/rfkill.h
>> +++ b/include/linux/rfkill.h
>> @@ -35,6 +35,7 @@
>>   * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
>>   * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
>>   * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
>> + * @RFKILL_TYPE_FM: switch is on a wireless FM device.
>>   * @NUM_RFKILL_TYPES: number of defined rfkill types
>>   */
>>  enum rfkill_type {
>> @@ -44,6 +45,7 @@ enum rfkill_type {
>>       RFKILL_TYPE_UWB,
>>       RFKILL_TYPE_WIMAX,
>>       RFKILL_TYPE_WWAN,
>> +     RFKILL_TYPE_FM,
>>       RFKILL_TYPE_GPS,
>>       NUM_RFKILL_TYPES,
>>  };
>
> Nice try, but no fly. This struct is ABI, you cannot add in the middle.
Is it ok if i can add my change after RFKILL_TYPE_GPS.But with respect
to the change i made i also made the necessary changes in core.c.

>
> johannes
>

Re:

[John W. Linville]

On Wed, Nov 18, 2009 at 11:53:51AM +0100, Johannes Berg wrote:
> On Wed, 2009-11-18 at 07:20 +0530, Janakiram Sistla wrote:
> 
> > ---
> >  include/linux/rfkill.h |    2 ++
> >  net/rfkill/core.c      |    2 ++
> >  2 files changed, 4 insertions(+), 0 deletions(-)
> > 
> > diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
> > index 3392c59..7ae75ef 100644
> > --- a/include/linux/rfkill.h
> > +++ b/include/linux/rfkill.h
> > @@ -35,6 +35,7 @@
> >   * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
> >   * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
> >   * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
> > + * @RFKILL_TYPE_FM: switch is on a wireless FM device.
> >   * @NUM_RFKILL_TYPES: number of defined rfkill types
> >   */
> >  enum rfkill_type {
> > @@ -44,6 +45,7 @@ enum rfkill_type {
> >  	RFKILL_TYPE_UWB,
> >  	RFKILL_TYPE_WIMAX,
> >  	RFKILL_TYPE_WWAN,
> > +	RFKILL_TYPE_FM,
> >  	RFKILL_TYPE_GPS,
> >  	NUM_RFKILL_TYPES,
> >  };
> 
> Nice try, but no fly. This struct is ABI, you cannot add in the middle.

Ah, good point -- I think I may have inadvertently encourage this
order. :-(

It looks like you'll need the other order -- be mindful of the
BUILD_BUG_ON I pointed-out in the previous email!

John

P.S.  Hmmm...anyone want to add a kerneldoc entry for RFKILL_TYPE_GPS?
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re:

[Janakiram Sistla]

On Wed, Nov 18, 2009 at 7:14 PM, John W. Linville
<linville@tuxdriver.com> wrote:
> On Wed, Nov 18, 2009 at 11:53:51AM +0100, Johannes Berg wrote:
>> On Wed, 2009-11-18 at 07:20 +0530, Janakiram Sistla wrote:
>>
>> > ---
>> >  include/linux/rfkill.h |    2 ++
>> >  net/rfkill/core.c      |    2 ++
>> >  2 files changed, 4 insertions(+), 0 deletions(-)
>> >
>> > diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
>> > index 3392c59..7ae75ef 100644
>> > --- a/include/linux/rfkill.h
>> > +++ b/include/linux/rfkill.h
>> > @@ -35,6 +35,7 @@
>> >   * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
>> >   * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
>> >   * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
>> > + * @RFKILL_TYPE_FM: switch is on a wireless FM device.
>> >   * @NUM_RFKILL_TYPES: number of defined rfkill types
>> >   */
>> >  enum rfkill_type {
>> > @@ -44,6 +45,7 @@ enum rfkill_type {
>> >     RFKILL_TYPE_UWB,
>> >     RFKILL_TYPE_WIMAX,
>> >     RFKILL_TYPE_WWAN,
>> > +   RFKILL_TYPE_FM,
>> >     RFKILL_TYPE_GPS,
>> >     NUM_RFKILL_TYPES,
>> >  };
>>
>> Nice try, but no fly. This struct is ABI, you cannot add in the middle.
>
> Ah, good point -- I think I may have inadvertently encourage this
> order. :-(
>
> It looks like you'll need the other order -- be mindful of the
> BUILD_BUG_ON I pointed-out in the previous email!
>
> John
>
> P.S.  Hmmm...anyone want to add a kerneldoc entry for RFKILL_TYPE_GPS?
Can i add this ???
> --
> John W. Linville                Someday the world will need a hero, and you
> linville@tuxdriver.com                  might be all we have.  Be ready.
>

Re:

[John W. Linville]

On Wed, Nov 18, 2009 at 07:49:30PM +0530, Janakiram Sistla wrote:
> On Wed, Nov 18, 2009 at 7:14 PM, John W. Linville

> > P.S.  Hmmm...anyone want to add a kerneldoc entry for RFKILL_TYPE_GPS?
> Can i add this ???

Sure, but please do a different patch for that.  Make it the first
one, so that it can be applied even if there is still a problem with
the other patch.

Thanks,

John
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re:

[Andrey Yurovsky]
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Re:

[Gábor Stefanik]

Decoded version:

The rtl8187se is not supported by the mainline driver.  There's a
driver for it in staging though, and there's a vendor driver hosted
here:
http://code.google.com/p/msi-wind-linux/
...I would try to build and load that driver for now.

  -Andrey

2009/5/19 Andrey Yurovsky <yurovsky@gmail.com>:
> MjAwOS81LzE3IFdsYWRpbWlyIEhpcm5paiA8Y291bnRlci1zdHJpa2VAYmsucnU+Ogo+IPrE0sHX
> 09TX1crUxS4KPiD0wcvB0SDQ0s/CzMXNwSBzbGFja3dhcmUgMTIuMiCa0cTSzyAyLjYuMjcgzsUg
> zc/H1SDV09TBzs/XydTYIMTSwcrXxdLBIM7BIHdpZmkgcnRsODE4N3NlLgo+IO/exc7YINDSz9vV
> INDPzc/e2CDF08zJINzUzyDXz9rNz9bOzy4KPiDl08zJINzUzyDXz9rNz9bOzyDUzyDQz9bBzNXK
> 09TBINDPxNLPws7PIM/QydvJ1MUgy8HLINzUzyDExczB1Ngg09nMy8HNySDOwSDE0sHK18XSwSDJ
> IMTP0M/MzsnU0sXM2M7ZxSDQwcvF1NkgKMkgy8HLIMnIINXT1MHOz9fJ1NgpLgo+IGFwdC1nZXQg
> zsXU1SgKPiDT1M/J1CBzbGFwdC1nZXQgzsXazsHAIMvByyDJzSDQz8zY2s/XwdTY09EuCj4g+sHS
> wc7FxSDT0MHTycLPLgoKVGhlIHJ0bDgxODdzZSBpcyBub3Qgc3VwcG9ydGVkIGJ5IHRoZSBtYWlu
> bGluZSBkcml2ZXIuICBUaGVyZSdzIGEKZHJpdmVyIGZvciBpdCBpbiBzdGFnaW5nIHRob3VnaCwg
> YW5kIHRoZXJlJ3MgYSB2ZW5kb3IgZHJpdmVyIGhvc3RlZApoZXJlOgpodHRwOi8vY29kZS5nb29n
> bGUuY29tL3AvbXNpLXdpbmQtbGludXgvCi4uLkkgd291bGQgdHJ5IHRvIGJ1aWxkIGFuZCBsb2Fk
> IHRoYXQgZHJpdmVyIGZvciBub3cuCgogIC1BbmRyZXkK
-- 
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)

Re:

[Larry Finger]

Gábor Stefanik wrote:
> Decoded version:
> 
> The rtl8187se is not supported by the mainline driver.  There's a
> driver for it in staging though, and there's a vendor driver hosted
> here:
> http://code.google.com/p/msi-wind-linux/
> ...I would try to build and load that driver for now.

The driver in staging _IS_ the vendor driver with a leak in the procfs fixed and
the code brought up to the latest kernels. It will work. There is no need to use
the vendor driver and to redo those fixes.

I am working on an rtl8187se driver that uses mac80211 and that will be suitable
to be included in mainline kernels. I estimate that I am about 25% done.

Larry

Re:

[Gábor Stefanik]

On Thu, May 7, 2009 at 3:57 AM, waqas <waqas281@gmail.com> wrote:
> root@bt:~/Desktop/compat-wireless-2009-05-06# make install
>
> Your old wireless subsystem modules were left intact:
>
> /lib/modules/2.6.28.1/kernel/net/mac80211/mac80211.ko
> /lib/modules/2.6.28.1/kernel/net/wireless/cfg80211.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/adm8211.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/ath5k/ath5k.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/ath9k/ath9k.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/b43/b43.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/b43legacy/b43legacy=
=2Eko
> /lib/modules/2.6.28.1/kernel/drivers/net/usb/cdc_ether.ko
> /lib/modules/2.6.28.1/kernel/drivers/misc/eeprom_93cx6.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/ipw2100.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/ipw2200.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwlagn.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas.k=
o
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas_c=
s.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/libertas_s=
dio.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas_tf/liberta=
s_tf.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas_tf/liberta=
s_tf_usb.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/mac80211_hwsim.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54common.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54pci.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/p54/p54usb.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/usb/rndis_host.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rndis_wlan.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2400pci.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt61pci.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rt2x00/rt73usb.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rtl8180.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/rtl8187.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/libertas/usb8xxx.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/usb/usbnet.ko
> /lib/modules/2.6.28.1/kernel/drivers/net/wireless/zd1211rw/zd1211rw.k=
o
>
> make -C /lib/modules/2.6.28.1/build
> M=3D/root/Desktop/compat-wireless-2009-05-06 "INSTALL_MOD_DIR=3Dupdat=
es"
> \
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0modules_install
> make[1]: Entering directory `/usr/src/linux-source-2.6.28.1'
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/misc/eepr=
om/eeprom_93cx6.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/b44.k=
o
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/usb/c=
dc_ether.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/usb/r=
ndis_host.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/usb/u=
sbnet.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/adm8211.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/at76c50x-usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ath/ath.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ath/ath5k/ath5k.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ath/ath9k/ath9k.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/b43/b43.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/b43legacy/b43legacy.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ipw2x00/ipw2100.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ipw2x00/ipw2200.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/ipw2x00/libipw.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/iwlwifi/iwl3945.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/iwlwifi/iwlagn.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/iwlwifi/iwlcore.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas/libertas.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas/libertas_cs.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas/libertas_sdio.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas/usb8xxx.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas_tf/libertas_tf.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/libertas_tf/libertas_tf_usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/mac80211_hwsim.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/mwl8k.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/p54/p54common.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/p54/p54pci.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/p54/p54usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rndis_wlan.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2400pci.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2500pci.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2500usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2800usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2x00lib.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2x00pci.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt2x00usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt61pci.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rt2x00/rt73usb.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rtl818x/rtl8180.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/rtl818x/rtl8187.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/drivers/net/wirel=
ess/zd1211rw/zd1211rw.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/mac80211/mac8=
0211.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/wireless/cfg8=
0211.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/wireless/lib8=
0211.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/wireless/lib8=
0211_crypt_ccmp.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/wireless/lib8=
0211_crypt_tkip.ko
> =A0INSTALL /root/Desktop/compat-wireless-2009-05-06/net/wireless/lib8=
0211_crypt_wep.ko
> =A0DEPMOD =A02.6.28.1
> make[1]: Leaving directory `/usr/src/linux-source-2.6.28.1'
>
> Note: madwifi detected, we're going to disable it. If you would like
> to enable it later you can run:
> =A0 =A0sudo athenable madwifi
>
> Running athenable ath5k...
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
> [ERROR] Module is still being detected:
> /lib/modules/2.6.28.1/net/ath_pci.ko
> Disabling ath_pci ...mv: cannot stat
> `/lib/modules/2.6.28.1//lib/modules/2.6.28.1/net/ath_pci.ko': No such
> file or directory
>
>
>
> google search don't show up anything so only thing i can do is send b=
ug report.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wirel=
ess" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at =A0http://vger.kernel.org/majordomo-info.html
>

Try this patch:

--- scripts/modlib.sh.bak	2009-05-06 22:40:50.000000000 +0200
+++ scripts/modlib.sh	2009-05-06 22:40:31.000000000 +0200
 -38,7 +38,7 @@ function module_disable {
 		else
 			echo -en "Disabling $MODULE ..."
 		fi
-		mv -f /lib/modules/$VER/$CHECK /lib/modules/$VER/${CHECK}${IGNORE_SU=
=46FIX}
+		mv -f $CHECK ${CHECK}${IGNORE_SUFFIX}
 		depmod -ae
 		CHECK_AGAIN=3D`modprobe -l $MODULE`
 		if [ "$CHECK" !=3D "$CHECK_AGAIN" ]; then

(pastebin address if this mail is linewrapped: http://pastebin.com/f233=
42312)

--=20
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

(no subject)

[donpetrus]

Hello, there is no possible to download  compat-wireless-2.6.tar.bz2 
After clicking on it nothing happens -
Thanks and best regards,
Petrus

Re:

[Michael Buesch]

On Wednesday 22 April 2009 20:12:05 donpetrus@arcor.de wrote:
> 
> Hello, there is no possible to download  compat-wireless-2.6.tar.bz2 
> After clicking on it nothing happens -
> Thanks and best regards,
> Petrus

Please click harder.

-- 
Greetings, Michael.

(no subject)

[David Thornton]

    unsubscribe linux-wireless

Re:

[Johannes Berg]

[-- Attachment #1: Type: text/plain, Size: 339 bytes --]

On Thu, 2009-03-19 at 07:03 +1100, David Thornton wrote:
> unsubscribe linux-wireless
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Try reading more closely.

johannes

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

(no subject)

[Edgar Velasco]

I'm reporting a bug.=20
Went I make, this is what I get:

compat-wireless-2.6-old # make
/root/compat-wireless-2.6-old/config.mk:30: *** "ERROR: There is a bug =
with compat-wireless on 2.6.22. Remove me if you want to fix me".  Stop=
=2E

How can I fix it?
Edgar Velasco.



      _________________________________________________________________=
___________________
Yahoo! MTV Blog & Rock >=A1Cu=E9ntanos tu historia, inspira una canc=
i=F3n y g=E1nate un viaje a los Premios MTV! Participa aqu=ED http://mt=
vla.yahoo.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re:

[Luis R. Rodriguez]

On Sat, Sep 13, 2008 at 9:10 AM, Edgar Velasco <ingeideas@yahoo.com> wrote:
> I'm reporting a bug.
> Went I make, this is what I get:
>
> compat-wireless-2.6-old # make
> /root/compat-wireless-2.6-old/config.mk:30: *** "ERROR: There is a bug with compat-wireless on 2.6.22. Remove me if you want to fix me".  Stop.
>
> How can I fix it?

The error happens because config.mk checks for your kernel release and
if it detects its you are using a kernel release <= 2.6.22 it'll stop
and error out with that message. The problem is there is an oops
(kernel crash) that will occur if you enable the compile to go through
and use it. The error indicates to you that if you want to try to fix
the issue you can remove the force check on config.mk.

I used to support 2.6.22 but distributions have newer kernels so I
rather focus attention on newer kernels as we move forward. This gives
the opportunity for those developers interested in using 2.6.22 to go
ahead and fix it if they wish.

If you are a user I'd recommend to upgrade to at least 2.6.26.

  Luis

Re:

[Stefanik Gábor]

On Sun, Aug 3, 2008 at 12:33 PM, Angel Mieres <mieres.angel@gmail.com> wrote:
> unsubscribe linux-wireless

Send it to majordomo@vger.kernel.org, not here.

-- 
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)

(no subject)

[Bruno Randolf]

unsubscribe

Re:

[Bruno Randolf]

On Monday 14 July 2008 18:18:02 Bruno Randolf wrote:
> unsubscribe

erm, sorry for that embarassing mistake...
i'm going to follow the list thru gmane news from now on.

bruno

(no subject)

[Adam Turk]

Hello, 

I just compiled 2.6.25-rc6 and got a bunch of warnings when I did make modules_install. I am using a PC not a laptop so I don't bother compiling PCMCIA support.

WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_skb_return
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_suspend
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_generic_cdc_bind
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_disconnect
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_cdc_unbind
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_probe
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs unknown symbol usbnet_resume
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_disable_device
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_unregister_driver
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_map_mem_page
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pccard_get_first_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_request_window
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_request_configuration
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pccard_get_tuple_data
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_register_driver
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pccard_parse_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/b43/b43.ko needs unknown symbol pcmcia_request_irq
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas.ko needs unknown symbol debugfs_remove
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas.ko needs unknown symbol debugfs_create_file
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas.ko needs unknown symbol debugfs_create_dir
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_disable_device
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_unregister_driver
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pccard_get_first_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_request_io
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_request_configuration
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pccard_get_tuple_data
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_register_driver
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pccard_parse_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/net/wireless/libertas/libertas_cs.ko needs unknown symbol pcmcia_request_irq
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/ssb/ssb.ko needs unknown symbol pccard_get_first_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/ssb/ssb.ko needs unknown symbol pcmcia_access_configuration_register
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/ssb/ssb.ko needs unknown symbol pccard_get_tuple_data
WARNING: /lib/modules/2.6.25-rc6/updates/drivers/ssb/ssb.ko needs unknown symbol pccard_get_next_tuple
WARNING: /lib/modules/2.6.25-rc6/updates/net/wireless/cfg80211.ko needs unknown symbol debugfs_remove
WARNING: /lib/modules/2.6.25-rc6/updates/net/wireless/cfg80211.ko needs unknown symbol debugfs_rename
WARNING: /lib/modules/2.6.25-rc6/updates/net/wireless/cfg80211.ko needs unknown symbol debugfs_create_dir

Just an FYI,
_________________________________________________________________
Test your Star IQ
http://club.live.com/red_carpet_reveal.aspx?icid=redcarpet_HMTAGMAR

Re:

[Pavel Roskin]

Quoting Adam Turk <bofh1234@hotmail.com>:

>
> Hello,
>
> I just compiled 2.6.25-rc6 and got a bunch of warnings when I did   
> make modules_install. I am using a PC not a laptop so I don't bother  
>  compiling PCMCIA support.
>
> WARNING:   
> /lib/modules/2.6.25-rc6/updates/drivers/net/usb/rndis_host.ko needs   
> unknown symbol usbnet_skb_return

Just remove /lib/modules/2.6.25-rc6 and reinstall the modules.  It's  
probably modules installed by compat-wireless that were compiled for a  
kernel with the same version but different settings.

-- 
Regards,
Pavel Roskin

[PATCH 1/7] rc80211-pid: export human-readable target_pf value to debugfs

[Stefano Brivio]

Export the non-shifted target_pf value to debugfs, so that it's human-readable.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
---
 rc80211_pid.h      |    2 +-
 rc80211_pid_algo.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Index: wireless-2.6/net/mac80211/rc80211_pid.h
===================================================================
--- wireless-2.6.orig/net/mac80211/rc80211_pid.h
+++ wireless-2.6/net/mac80211/rc80211_pid.h
@@ -38,7 +38,7 @@
  * link quality is good, the controller will fail to adjust failed frames
  * percentage to the target. This is intentional.
  */
-#define RC_PID_TARGET_PF (11 << RC_PID_ARITH_SHIFT)
+#define RC_PID_TARGET_PF 11

 /* Rate behaviour normalization quantity over time. */
 #define RC_PID_NORM_OFFSET 3
Index: wireless-2.6/net/mac80211/rc80211_pid_algo.c
===================================================================
--- wireless-2.6.orig/net/mac80211/rc80211_pid_algo.c
+++ wireless-2.6/net/mac80211/rc80211_pid_algo.c
@@ -210,7 +210,7 @@ static void rate_control_pid_sample(stru
 	rate_control_pid_normalize(pinfo, mode->num_rates);

 	/* Compute the proportional, integral and derivative errors. */
-	err_prop = pinfo->target - pf;
+	err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf;

 	err_avg = spinfo->err_avg_sc >> pinfo->smoothing_shift;
 	spinfo->err_avg_sc = spinfo->err_avg_sc - err_avg + err_prop;

-- 
Ciao
Stefano

(no subject)

[Mattias Nissler]

Hey,

I'm a little late on this and away from my development machine anyway, =
but when reading my email, I noticed the following and thought this is =
important enough to point out, even though I only have that crappy webm=
ailer and the only kernel tree I can look at is wireless-2.6/everything=
 on git.kernel.org

In rc80211_pid.h, you have the following (this from the wireless-2.6 tr=
ee):

        /* Sampling period for measuring percentage of failed frames. *=
/
        #define RC_PID_INTERVAL (HZ / 8)

But rc80211_pid_algo.c says:

        period =3D (HZ * pinfo->sampling_period + 500) / 1000;
        if (!period)
                period =3D 1;

You see this is completely bogus. My original patch had:

        /* Sampling period for measuring percentage of failed frames in=
 0.001s. */
        #define RC_PID_INTERVAL 1000

You see why what you posted and John commited is bogus?

I'm getting a little fed up with this, you keep screwing up the code wi=
th my name on it *sigh*

And again, I still don't think guarding against period =3D=3D 0 is the =
right thing to do. As I explained privately in IRC, we should make sure=
 the sample_interval is larger than HZ when setting the sample_interval=
 variable  (once nl80211 is done). It doesn't make sense to do this che=
ck every time we execute the code when we can do it once in advance.

Sigh.

Mattias
--=20
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!=20
Ideal f=FCr Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
-
To unsubscribe from this list: send the line "unsubscribe linux-wireles=
s" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re:

[Stefano Brivio]

On Sun, 23 Dec 2007 13:19:51 +0100
"Mattias Nissler" <Mattias.Nissler@gmx.de> wrote:

> Hey,
> 
> I'm a little late on this and away from my development machine anyway, but
> when reading my email, I noticed the following and thought this is
> important enough to point out, even though I only have that crappy
> webmailer and the only kernel tree I can look at is wireless-2.6/everything
> on git.kernel.org
> 
> In rc80211_pid.h, you have the following (this from the wireless-2.6 tree):
> 
>         /* Sampling period for measuring percentage of failed frames. */
>         #define RC_PID_INTERVAL (HZ / 8)
> 
> But rc80211_pid_algo.c says:
> 
>         period = (HZ * pinfo->sampling_period + 500) / 1000;
>         if (!period)
>                 period = 1;
> 
> You see this is completely bogus. My original patch had:
> 
>         /* Sampling period for measuring percentage of failed frames in 0.001s. */
>         #define RC_PID_INTERVAL 1000
> 
> You see why what you posted and John commited is bogus?

Indeed. I didn't notice about this because HZ == 1000 on my laptop. But I
didn't even sign off that patch, I just added a From: on top of it,
and changed this:

+#define RC_PID_INTERVAL (HZ / 1)
[yes, this is present in your original - as sent through IRC - patch]

to:

+#define RC_PID_INTERVAL (HZ / 8)
[and IIRC we discussed about this on IRC]

I'll post a fix for this.

> I'm getting a little fed up with this, you keep screwing up the code with
> my name on it *sigh*

Please, could you show _exactly_ which patches with your name (as in,
From: you) you think I screwed up?

I don't think I screwed up anything yours. I would be very sorry otherwise.

> And again, I still don't think guarding against period == 0 is the right
> thing to do. As I explained privately in IRC, we should make sure the
> sample_interval is larger than HZ when setting the sample_interval
> variable  (once nl80211 is done). It doesn't make sense to do this check
> every time we execute the code when we can do it once in advance.

Exactly, once nl80211 is done. Now, what if the control interval gets
changed after initialization? How often should we check whether it's larger
than HZ? If you got another solution which would work together with the
current debugfs interface, please post it.

> Sigh.

Please stop this. I think that this is:
1) not correct (but I don't care that much);
2) useless;
3) confusing.

Sorry again if I actually screwed up anything.


--
Ciao
Stefano

(no subject)

[Larry Finger]

During testing of bcm43xx interference mitigation, two problems were
discovered:

(1) When the MANUALWLAN mode was set, routines _stack_save and _stack_restore
    generated assertions that were traced to saving ILT registers with addresses
    > 0xFFF. This problem was fixed by adding one bit to the field used for
    the offset, and subtracting one bit from the space used for the id.
(2) In MANUALWLAN mode, the IRQ XMIT errors are generated. The cause of these
    errors has not yet been located. Any suggestions on debugging this problem
    would be greatly appreciated.

Larry


Index: wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
===================================================================
--- wireless-2.6.orig/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+++ wireless-2.6/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
@@ -882,10 +882,10 @@ static void _stack_save(u32 *_stackptr, 
 {
 	u32 *stackptr = &(_stackptr[*stackidx]);
 
-	assert((offset & 0xF000) == 0x0000);
-	assert((id & 0xF0) == 0x00);
+	assert((offset & 0xE000) == 0x0000);
+	assert((id & 0xF8) == 0x00);
 	*stackptr = offset;
-	*stackptr |= ((u32)id) << 12;
+	*stackptr |= ((u32)id) << 13;
 	*stackptr |= ((u32)value) << 16;
 	(*stackidx)++;
 	assert(*stackidx < BCM43xx_INTERFSTACK_SIZE);
@@ -896,12 +896,12 @@ static u16 _stack_restore(u32 *stackptr,
 {
 	size_t i;
 
-	assert((offset & 0xF000) == 0x0000);
-	assert((id & 0xF0) == 0x00);
+	assert((offset & 0xE000) == 0x0000);
+	assert((id & 0xF8) == 0x00);
 	for (i = 0; i < BCM43xx_INTERFSTACK_SIZE; i++, stackptr++) {
-		if ((*stackptr & 0x00000FFF) != offset)
+		if ((*stackptr & 0x00001FFF) != offset)
 			continue;
-		if (((*stackptr & 0x0000F000) >> 12) != id)
+		if (((*stackptr & 0x00007000) >> 13) != id)
 			continue;
 		return ((*stackptr & 0xFFFF0000) >> 16);
 	}

Re:

[Michael Buesch]

On Wednesday 14 March 2007 16:32, Larry Finger wrote:
> During testing of bcm43xx interference mitigation, two problems were
> discovered:
> 
> (1) When the MANUALWLAN mode was set, routines _stack_save and _stack_restore
>     generated assertions that were traced to saving ILT registers with addresses
>     > 0xFFF. This problem was fixed by adding one bit to the field used for
>     the offset, and subtracting one bit from the space used for the id.
> (2) In MANUALWLAN mode, the IRQ XMIT errors are generated. The cause of these
>     errors has not yet been located. Any suggestions on debugging this problem
>     would be greatly appreciated.

Interference mitigation code is broken and has always been. It never worked.
So no wonder it doesn't work now. ;)
I'd suggest to first fix that (by a rewrite) before you do any code
that's based on it (like this ACI stuff).

I won't do it. interf mitigation is an uninterresting feature to me.

-- 
Greetings Michael.