Re: [PATCH] mac80211: do not call rate control .tx_status before .rate_init

[Pavel Roskin <proski@gnu.org>]

[-- Attachment #1: Type: text/plain, Size: 1155 bytes --]

On Thu, 09 Feb 2012 01:51:51 +0100
Felix Fietkau <nbd@openwrt.org> wrote:

> Only .get_rate and .tx_status are affected, wireless-testing commit
> e1936e9407138b483e6d1332dd944afec8131f30 adds one of the checks, and
> my commit adds the other. Maybe John could merge those two to 3.3.

I ran the "affected" laptop with ath9k rate control overnight with
compat-wireless-2012-02-06 and both patches.  As strange as it is, I
still got a pair of "-1 events" less than a millisecond apart.  It took
18433 seconds (about 4 hours) to reproduce.

I wish I put more instrumentation into the ath9k rate control code.  I
absolutely didn't expect the issue to stay.

I tried to find a way to reproduce the "-1 event" quickly, I even put
the laptop in a microwave oven while running flood ping to the router.
Too bad, nothing interesting happened.

The full kernel log is attached.  Also, I'm getting "ath: Failed to
stop TX DMA, queues=0x001!"; it wasn't there with compat-wireless 3.3.

It looks like the issue with ath9k rate control is separate and I have
no standing (as lawyers would say) with regard to the already committed
patches.

-- 
Regards,
Pavel Roskin

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 63645 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.3-2.fc16.x86_64 (mockbuild@x86-05.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Fri Feb 3 20:08:08 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.3-2.fc16.x86_64 root=UUID=615ddbc6-ce0e-4197-8068-9c3cb5e2a977 ro
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
[    0.000000]  BIOS-e820: 000000007f690000 - 000000007f69e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f69e000 - 000000007f6e0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f6e0000 - 000000007f700000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: ASUSTeK Computer INC. 1005PE/1005P, BIOS 1202    06/23/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7f690 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] total RAM covered: 2039M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000007f690000
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f690000 page 4k
[    0.000000] kernel direct mapping tables up to 7f690000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 35ec8000 - 36f5c000
[    0.000000] ACPI: RSDP 00000000000fbf40 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 000000007f690100 0006C (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
[    0.000000] ACPI: FACP 000000007f690290 000F4 (v04 A_M_I_ OEMFACP  06001023 MSFT 00000097)
[    0.000000] ACPI: DSDT 000000007f690490 08BDE (v02  A1414 A1414000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 000000007f69e000 00040
[    0.000000] ACPI: APIC 000000007f690390 0005C (v02 A_M_I_ OEMAPIC  06001023 MSFT 00000097)
[    0.000000] ACPI: MCFG 000000007f6903f0 0003C (v01 A_M_I_ OEMMCFG  06001023 MSFT 00000097)
[    0.000000] ACPI: ECDT 000000007f690430 00055 (v01 A_M_I_ OEMECDT  06001023 MSFT 00000097)
[    0.000000] ACPI: OEMB 000000007f69e040 00061 (v01 A_M_I_ AMI_OEM  06001023 MSFT 00000097)
[    0.000000] ACPI: HPET 000000007f699070 00038 (v01 A_M_I_ OEMHPET  06001023 MSFT 00000097)
[    0.000000] ACPI: GSCI 000000007f69e0b0 02024 (v01 A_M_I_ GMCHSCI  06001023 MSFT 00000097)
[    0.000000] ACPI: SSDT 000000007f6a0c80 004F0 (v01  PmRef    CpuPm 00003000 INTL 20060113)
[    0.000000] ACPI: SLIC 000000007f6990b0 00176 (v01 _ASUS_ Notebook 06001023 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007f690000
[    0.000000] Initmem setup node 0 0000000000000000-000000007f690000
[    0.000000]   NODE_DATA [000000007f67c000 - 000000007f68ffff]
[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007ce00000-ffff88007edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f690
[    0.000000] On node 0 totalpages: 521759
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8091 pages used for memmap
[    0.000000]   DMA32 zone: 509685 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:7f700000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f400000 s83072 r8192 d23424 u1048576
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513599
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.3-2.fc16.x86_64 root=UUID=615ddbc6-ce0e-4197-8068-9c3cb5e2a977 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 2022772k/2087488k available (6073k kernel code, 452k absent, 64264k reserved, 5015k data, 1596k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1666.375 MHz processor.
[    0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.75 BogoMIPS (lpj=1666375)
[    0.001223] pid_max: default: 32768 minimum: 301
[    0.001390] Security Framework initialized
[    0.001501] SELinux:  Initializing.
[    0.002025] SELinux:  Starting in permissive mode
[    0.002625] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004754] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005766] Mount-cache hash table entries: 256
[    0.006272] Initializing cgroup subsys cpuacct
[    0.006392] Initializing cgroup subsys memory
[    0.006522] Initializing cgroup subsys devices
[    0.006627] Initializing cgroup subsys freezer
[    0.006731] Initializing cgroup subsys net_cls
[    0.006836] Initializing cgroup subsys blkio
[    0.006951] Initializing cgroup subsys perf_event
[    0.007084] CPU: Physical Processor ID: 0
[    0.007188] CPU: Processor Core ID: 0
[    0.007288] mce: CPU supports 5 MCE banks
[    0.007400] CPU0: Thermal monitoring enabled (TM2)
[    0.007510] using mwait in idle threads.
[    0.009650] ACPI: Core revision 20110623
[    0.022024] ftrace: allocating 22796 entries in 90 pages
[    0.024238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.034363] CPU0: Intel(R) Atom(TM) CPU N450   @ 1.66GHz stepping 0a
[    0.034997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.034997] ... version:                3
[    0.034997] ... bit width:              40
[    0.034997] ... generic registers:      2
[    0.034997] ... value mask:             000000ffffffffff
[    0.034997] ... max period:             000000007fffffff
[    0.034997] ... fixed-purpose events:   3
[    0.034997] ... event mask:             0000000700000003
[    0.035339] NMI watchdog enabled, takes one hw-pmu counter.
[    0.035825] Booting Node   0, Processors  #1 Ok.
[    0.035968] smpboot cpu 1: start_ip = 9a000
[    0.001999] Disabled fast string operations
[    0.108055] NMI watchdog enabled, takes one hw-pmu counter.
[    0.108352] Brought up 2 CPUs
[    0.108457] Total of 2 processors activated (6665.57 BogoMIPS).
[    0.109169] devtmpfs: initialized
[    0.110117] PM: Registering ACPI NVS region at 7f69e000 (270336 bytes)
[    0.112637] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.112807] RTC time:  3:01:40, date: 02/09/12
[    0.113020] NET: Registered protocol family 16
[    0.113542] ACPI: bus type pci registered
[    0.113794] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.113974] PCI: not using MMCONFIG
[    0.113998] PCI: Using configuration type 1 for base access
[    0.117053] bio: create slab <bio-0> at 0
[    0.117238] ACPI: Added _OSI(Module Device)
[    0.117238] ACPI: Added _OSI(Processor Device)
[    0.117289] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.117392] ACPI: Added _OSI(Processor Aggregator Device)
[    0.120892] ACPI: EC: EC description table is found, configuring boot EC
[    0.124397] ACPI: Executed 1 blocks of module-level executable AML code
[    0.132065] ACPI: SSDT 000000007f6a0190 00326 (v01  PmRef  Cpu0Ist 00003000 INTL 20060113)
[    0.133157] ACPI: Dynamic OEM Table Load:
[    0.133330] ACPI: SSDT           (null) 00326 (v01  PmRef  Cpu0Ist 00003000 INTL 20060113)
[    0.133955] ACPI: SSDT 000000007f6a0550 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 20060113)
[    0.134907] ACPI: Dynamic OEM Table Load:
[    0.135078] ACPI: SSDT           (null) 00724 (v01  PmRef  Cpu0Cst 00003001 INTL 20060113)
[    0.135917] ACPI: SSDT 000000007f6a00e0 000AB (v01  PmRef  Cpu1Ist 00003000 INTL 20060113)
[    0.136934] ACPI: Dynamic OEM Table Load:
[    0.137120] ACPI: SSDT           (null) 000AB (v01  PmRef  Cpu1Ist 00003000 INTL 20060113)
[    0.137584] ACPI: SSDT 000000007f6a04c0 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060113)
[    0.138564] ACPI: Dynamic OEM Table Load:
[    0.138737] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20060113)
[    0.139422] ACPI: Interpreter enabled
[    0.139529] ACPI: (supports S0 S3 S4 S5)
[    0.139818] ACPI: Using IOAPIC for interrupt routing
[    0.140001] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.141403] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.188318] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.191232] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.191767] ACPI: No dock devices found.
[    0.191872] HEST: Table not found.
[    0.191992] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.192363] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.192890] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.192989] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.193103] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.193264] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.193988] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xfed8ffff]
[    0.194169] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[    0.194231] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[    0.194247] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[    0.194258] pci 0000:00:02.0: reg 14: [io  0xdc00-0xdc07]
[    0.194268] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.194278] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
[    0.194330] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[    0.194344] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[    0.194449] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.194473] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[    0.194571] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.194584] pci 0000:00:1b.0: PME# disabled
[    0.194620] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.195035] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.195044] pci 0000:00:1c.0: PME# disabled
[    0.195088] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.195191] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.195199] pci 0000:00:1c.1: PME# disabled
[    0.195236] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.195338] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.195346] pci 0000:00:1c.3: PME# disabled
[    0.195383] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.195439] pci 0000:00:1d.0: reg 20: [io  0xd400-0xd41f]
[    0.195488] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.195543] pci 0000:00:1d.1: reg 20: [io  0xd480-0xd49f]
[    0.195591] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.195646] pci 0000:00:1d.2: reg 20: [io  0xd800-0xd81f]
[    0.195695] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.195750] pci 0000:00:1d.3: reg 20: [io  0xd880-0xd89f]
[    0.195810] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.195839] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
[    0.195952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.195961] pci 0000:00:1d.7: PME# disabled
[    0.196002] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.196102] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[    0.196261] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[    0.196289] pci 0000:00:1f.2: reg 10: [io  0xd080-0xd087]
[    0.196302] pci 0000:00:1f.2: reg 14: [io  0xd000-0xd003]
[    0.196316] pci 0000:00:1f.2: reg 18: [io  0xcc00-0xcc07]
[    0.196330] pci 0000:00:1f.2: reg 1c: [io  0xc880-0xc883]
[    0.196344] pci 0000:00:1f.2: reg 20: [io  0xc800-0xc81f]
[    0.196358] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
[    0.196419] pci 0000:00:1f.2: PME# supported from D3hot
[    0.196427] pci 0000:00:1f.2: PME# disabled
[    0.196455] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.196521] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.196628] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.196824] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[    0.196857] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[    0.197005] pci 0000:02:00.0: supports D1
[    0.197011] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.197020] pci 0000:02:00.0: PME# disabled
[    0.199010] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.199123] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.199135] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.199223] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
[    0.199256] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[    0.199275] pci 0000:01:00.0: reg 18: [io  0xec00-0xec7f]
[    0.199408] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.199418] pci 0000:01:00.0: PME# disabled
[    0.201006] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[    0.201117] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.201126] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.201219] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.201343] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.201350] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.201357] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.201364] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.201371] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff] (subtractive decode)
[    0.201405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.201692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.201786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.201851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.201912]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.201992]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.202158] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.217131] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.217798] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.218441] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.219107] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.219764] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.220563] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.221269] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.221935] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.222782] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.222998] vgaarb: loaded
[    0.223095] vgaarb: bridge control possible 0000:00:02.0
[    0.223390] SCSI subsystem initialized
[    0.223614] libata version 3.00 loaded.
[    0.223614] usbcore: registered new interface driver usbfs
[    0.224026] usbcore: registered new interface driver hub
[    0.224149] usbcore: registered new device driver usb
[    0.224255] PCI: Using ACPI for IRQ routing
[    0.231371] PCI: pci_cache_line_size set to 64 bytes
[    0.231488] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.231494] reserve RAM buffer: 000000007f690000 - 000000007fffffff 
[    0.231759] NetLabel: Initializing
[    0.231861] NetLabel:  domain hash size = 128
[    0.231962] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.232014] NetLabel:  unlabeled traffic allowed by default
[    0.232149] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.232265] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.232512] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.235102] Switching to clocksource hpet
[    0.258096] pnp: PnP ACPI init
[    0.258246] ACPI: bus type pnp registered
[    0.258587] pnp 00:00: [bus 00-ff]
[    0.258596] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.258602] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.258608] pnp 00:00: [io  0x0d00-0xffff window]
[    0.258614] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.258620] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.258626] pnp 00:00: [mem 0x7f700000-0xfed8ffff window]
[    0.258784] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.258817] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.258823] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.258935] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.259090] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.259207] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.259301] pnp 00:02: [dma 4]
[    0.259307] pnp 00:02: [io  0x0000-0x000f]
[    0.259313] pnp 00:02: [io  0x0081-0x0083]
[    0.259323] pnp 00:02: [io  0x0087]
[    0.259328] pnp 00:02: [io  0x0089-0x008b]
[    0.259333] pnp 00:02: [io  0x008f]
[    0.259338] pnp 00:02: [io  0x00c0-0x00df]
[    0.259407] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.259440] pnp 00:03: [io  0x0070-0x0071]
[    0.259461] pnp 00:03: [irq 8]
[    0.259527] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.259615] pnp 00:04: [io  0x0060]
[    0.259620] pnp 00:04: [io  0x0064]
[    0.259633] pnp 00:04: [irq 1]
[    0.259697] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.259781] pnp 00:05: [irq 12]
[    0.259853] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.259882] pnp 00:06: [io  0x0061]
[    0.259949] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.259977] pnp 00:07: [io  0x00f0-0x00ff]
[    0.259991] pnp 00:07: [irq 13]
[    0.260076] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.260397] pnp 00:08: [io  0x0010-0x001f]
[    0.260404] pnp 00:08: [io  0x0022-0x003f]
[    0.260409] pnp 00:08: [io  0x0044-0x004d]
[    0.260414] pnp 00:08: [io  0x0050-0x005e]
[    0.260419] pnp 00:08: [io  0x0063]
[    0.260424] pnp 00:08: [io  0x0065]
[    0.260429] pnp 00:08: [io  0x0067-0x006f]
[    0.260434] pnp 00:08: [io  0x0072-0x007f]
[    0.260439] pnp 00:08: [io  0x0080]
[    0.260444] pnp 00:08: [io  0x0084-0x0086]
[    0.260448] pnp 00:08: [io  0x0088]
[    0.260453] pnp 00:08: [io  0x008c-0x008e]
[    0.260458] pnp 00:08: [io  0x0090-0x009f]
[    0.260463] pnp 00:08: [io  0x00a2-0x00bf]
[    0.260468] pnp 00:08: [io  0x00e0-0x00ef]
[    0.260474] pnp 00:08: [io  0x025c-0x025f]
[    0.260479] pnp 00:08: [io  0x0380-0x0383]
[    0.260484] pnp 00:08: [io  0x0400-0x041f]
[    0.260489] pnp 00:08: [io  0x04d0-0x04d1]
[    0.260494] pnp 00:08: [io  0x0800-0x087f]
[    0.260499] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.260505] pnp 00:08: [io  0x0480-0x04bf]
[    0.260511] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.260516] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.260522] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.260527] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[    0.260532] pnp 00:08: [mem 0xfff00000-0xffffffff]
[    0.260680] system 00:08: [io  0x025c-0x025f] has been reserved
[    0.260795] system 00:08: [io  0x0380-0x0383] has been reserved
[    0.260905] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.261037] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.261148] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.261257] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.261367] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.261478] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.261591] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.261702] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.261814] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[    0.261932] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262121] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.262201] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.262334] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.262346] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.262453] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.262570] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.262685] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262785] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.262901] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.263042] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263576] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.263583] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.263589] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.263594] pnp 00:0c: [mem 0x00100000-0x7f6fffff]
[    0.263600] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[    0.263752] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.263869] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.263984] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.264121] system 00:0c: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.264236] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.264353] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264818] pnp: PnP ACPI: found 13 devices
[    0.264922] ACPI: ACPI bus type pnp unregistered
[    0.277148] PCI: max bus depth: 1 pci_try_num: 2
[    0.277221] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.277394] pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
[    0.277506] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f900000-0x7fafffff]
[    0.277620] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 64bit pref]
[    0.277784] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.277894] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[    0.278001] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.278131] pci 0000:00:1c.0:   bridge window [mem 0x7f900000-0x7fafffff]
[    0.278246] pci 0000:00:1c.0:   bridge window [mem 0x7fb00000-0x7fcfffff 64bit pref]
[    0.278413] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.278519] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.278631] pci 0000:00:1c.1:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.278745] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.278913] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[    0.279035] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.279150] pci 0000:00:1c.3:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.279265] pci 0000:00:1c.3:   bridge window [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.279432] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.279558] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.279695] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.279812] pci 0000:00:1c.0: setting latency timer to 64
[    0.279825] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.279946] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.280077] pci 0000:00:1c.1: setting latency timer to 64
[    0.280111] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.280227] pci 0000:00:1c.3: setting latency timer to 64
[    0.280241] pci 0000:00:1e.0: setting latency timer to 64
[    0.280250] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.280256] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.280262] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.280268] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.280274] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.280281] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.280287] pci_bus 0000:04: resource 1 [mem 0x7f900000-0x7fafffff]
[    0.280293] pci_bus 0000:04: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit pref]
[    0.280300] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.280306] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.280312] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[    0.280319] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.280325] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.280331] pci_bus 0000:01: resource 2 [mem 0x7f700000-0x7f8fffff 64bit pref]
[    0.280338] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.280344] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.280350] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.280356] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.280363] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[    0.280426] NET: Registered protocol family 2
[    0.280722] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.282199] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.285393] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.286217] TCP: Hash tables configured (established 262144 bind 65536)
[    0.286338] TCP reno registered
[    0.286469] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.286615] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.286944] NET: Registered protocol family 1
[    0.287131] pci 0000:00:02.0: Boot video device
[    0.287292] PCI: CLS 32 bytes, default 64
[    0.287469] Unpacking initramfs...
[    1.089779] Freeing initrd memory: 16976k freed
[    1.104943] Intel AES-NI instructions are not detected.
[    1.105482] audit: initializing netlink socket (disabled)
[    1.105613] type=2000 audit(1328756501.104:1): initialized
[    1.151183] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.172413] VFS: Disk quotas dquot_6.5.2
[    1.172640] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.174086] msgmni has been set to 3983
[    1.174339] SELinux:  Registering netfilter hooks
[    1.175345] alg: No test for stdrng (krng)
[    1.175475] NET: Registered protocol family 38
[    1.175732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.175984] io scheduler noop registered
[    1.176117] io scheduler deadline registered
[    1.176323] io scheduler cfq registered (default)
[    1.176993] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.177092] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.177224] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.177285] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.177400] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.177460] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    1.177659] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.177832] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.177945] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.178758] intel_idle: MWAIT substates: 0x20220
[    1.178782] intel_idle: v0.4 model 0x1C
[    1.178787] intel_idle: lapic_timer_reliable_states 0x2
[    1.178793] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.179212] ACPI: AC Adapter [AC0] (on-line)
[    1.179604] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.184610] ACPI: Lid Switch [LID]
[    1.184842] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.185038] ACPI: Sleep Button [SLPB]
[    1.185246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.185415] ACPI: Power Button [PWRB]
[    1.185623] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.185789] ACPI: Power Button [PWRF]
[    1.199717] thermal LNXTHERM:00: registered as thermal_zone0
[    1.199833] ACPI: Thermal Zone [TZ00] (58 C)
[    1.200064] ERST: Table is not found!
[    1.200184] GHES: HEST is not enabled!
[    1.200537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.216174] Non-volatile memory driver v1.3
[    1.216283] Linux agpgart interface v0.103
[    1.216529] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    1.216761] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.217140] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.217530] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.220133] loop: module loaded
[    1.220424] ahci 0000:00:1f.2: version 3.0
[    1.220472] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.220657] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.220759] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    1.220930] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    1.221127] ahci 0000:00:1f.2: setting latency timer to 64
[    1.222278] scsi0 : ahci
[    1.222633] scsi1 : ahci
[    1.222927] scsi2 : ahci
[    1.223266] scsi3 : ahci
[    1.223876] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 43
[    1.224070] ata2: DUMMY
[    1.224174] ata3: DUMMY
[    1.224269] ata4: DUMMY
[    1.224754] Fixed MDIO Bus: probed
[    1.225170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.225353] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.225498] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.225506] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.225850] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.226136] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.226267] ehci_hcd 0000:00:1d.7: debug port 1
[    1.230270] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.230310] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[    1.240036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.240207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.240321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.240481] usb usb1: Product: EHCI Host Controller
[    1.240585] usb usb1: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ehci_hcd
[    1.240696] usb usb1: SerialNumber: 0000:00:1d.7
[    1.241199] hub 1-0:1.0: USB hub found
[    1.241310] hub 1-0:1.0: 8 ports detected
[    1.241617] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.241760] uhci_hcd: USB Universal Host Controller Interface driver
[    1.241922] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.242919] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.242927] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.243220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.243424] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[    1.243618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.243732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.243892] usb usb2: Product: UHCI Host Controller
[    1.243996] usb usb2: Manufacturer: Linux 3.2.3-2.fc16.x86_64 uhci_hcd
[    1.244143] usb usb2: SerialNumber: 0000:00:1d.0
[    1.244544] hub 2-0:1.0: USB hub found
[    1.244655] hub 2-0:1.0: 2 ports detected
[    1.245059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.245202] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.245210] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.245494] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.245714] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[    1.245913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.246091] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.246253] usb usb3: Product: UHCI Host Controller
[    1.246356] usb usb3: Manufacturer: Linux 3.2.3-2.fc16.x86_64 uhci_hcd
[    1.246466] usb usb3: SerialNumber: 0000:00:1d.1
[    1.246863] hub 3-0:1.0: USB hub found
[    1.246974] hub 3-0:1.0: 2 ports detected
[    1.247306] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.247438] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.247445] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.247710] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.247945] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[    1.248173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.248286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.248447] usb usb4: Product: UHCI Host Controller
[    1.248551] usb usb4: Manufacturer: Linux 3.2.3-2.fc16.x86_64 uhci_hcd
[    1.248662] usb usb4: SerialNumber: 0000:00:1d.2
[    1.249104] hub 4-0:1.0: USB hub found
[    1.249215] hub 4-0:1.0: 2 ports detected
[    1.249488] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    1.249613] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.249621] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.249953] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.250215] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[    1.250402] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.250516] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250677] usb usb5: Product: UHCI Host Controller
[    1.250780] usb usb5: Manufacturer: Linux 3.2.3-2.fc16.x86_64 uhci_hcd
[    1.250891] usb usb5: SerialNumber: 0000:00:1d.3
[    1.251371] hub 5-0:1.0: USB hub found
[    1.251481] hub 5-0:1.0: 2 ports detected
[    1.251876] usbcore: registered new interface driver usbserial
[    1.252045] USB Serial support registered for generic
[    1.252192] usbcore: registered new interface driver usbserial_generic
[    1.252304] usbserial: USB Serial Driver core
[    1.252507] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.302607] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.302730] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.303193] mousedev: PS/2 mouse device common for all mice
[    1.304071] rtc_cmos 00:03: RTC can wake from S4
[    1.304417] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.304565] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.304905] device-mapper: uevent: version 1.0.3
[    1.305281] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.305772] cpuidle: using governor ladder
[    1.306151] cpuidle: using governor menu
[    1.306600] EFI Variables Facility v0.08 2004-May-17
[    1.307170] usbcore: registered new interface driver usbhid
[    1.307279] usbhid: USB HID core driver
[    1.307590] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.307748] TCP cubic registered
[    1.307808] ACPI: Battery Slot [BAT0] (battery present)
[    1.307987] Initializing XFRM netlink socket
[    1.308551] NET: Registered protocol family 10
[    1.309161] Mobile IPv6
[    1.309266] NET: Registered protocol family 17
[    1.309409] Registering the dns_resolver key type
[    1.309969] PM: Hibernation image not present or could not be loaded.
[    1.310041] registered taskstats version 1
[    1.318742]   Magic number: 0:925:6
[    1.319002] rtc_cmos 00:03: setting system clock to 2012-02-09 03:01:42 UTC (1328756502)
[    1.320353] Initializing network drop monitor service
[    1.330556] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.530092] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.541760] ata1.00: unexpected _GTF length (8)
[    1.542347] ata1.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
[    1.542473] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.546108] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[    1.551690] ata1.00: unexpected _GTF length (8)
[    1.552230] ata1.00: configured for UDMA/133
[    1.552821] scsi 0:0:0:0: Direct-Access     ATA      OCZ-AGILITY3     2.15 PQ: 0 ANSI: 5
[    1.553645] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.553771] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.554714] sd 0:0:0:0: [sda] Write Protect is off
[    1.554842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.555057] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.557058]  sda: sda1 sda2 sda3
[    1.558759] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.571174] Freeing unused kernel memory: 1596k freed
[    1.572693] Write protecting the kernel read-only data: 10240k
[    1.574381] Freeing unused kernel memory: 52k freed
[    1.598676] Freeing unused kernel memory: 1552k freed
[    1.665749] usb 1-6: New USB device found, idVendor=13d3, idProduct=5111
[    1.665912] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[    1.666124] usb 1-6: Product: USB2.0 UVC VGA WebCam
[    1.666263] usb 1-6: Manufacturer: Image Processor
[    1.666403] usb 1-6: SerialNumber: USB2.0 UVC VGA WebCam
[    2.059720] dracut: dracut-013-20.fc16
[    2.141466] udevd[113]: starting version 173
[    2.229726] [drm] Initialized drm 1.1.0 20060810
[    2.259712] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.259866] i915 0000:00:02.0: setting latency timer to 64
[    2.325848] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    2.325874] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.325992] [drm] Driver supports precise vblank timestamp query.
[    2.326217] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.455894] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
[    2.527933] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.669788] [drm] initialized overlay support
[    2.692271] fbcon: inteldrmfb (fb0) is primary device
[    3.120028] Console: switching to colour frame buffer device 128x37
[    3.131117] fb0: inteldrmfb frame buffer device
[    3.131126] drm: registered panic notifier
[    3.140519] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[    3.146030] acpi device:0e: registered as cooling_device2
[    3.146454] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.146848] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    3.147128] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.188777] dracut: Starting plymouth daemon
[    3.430466] wmi: Mapper loaded
[    3.904643] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.953899] dracut: Checking ext4: /dev/disk/by-uuid/615ddbc6-ce0e-4197-8068-9c3cb5e2a977
[    3.954488] dracut: issuing e2fsck -a  /dev/disk/by-uuid/615ddbc6-ce0e-4197-8068-9c3cb5e2a977
[    3.974822] dracut: _Fedora-16-x86_6: clean, 275730/3555328 files, 4894115/14208000 blocks
[    3.983120] dracut: Remounting /dev/disk/by-uuid/615ddbc6-ce0e-4197-8068-9c3cb5e2a977 with -o ro
[    4.009413] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.017794] dracut: Mounted root filesystem /dev/sda2
[    4.127552] dracut: Switching root
[    4.208452] type=1404 audit(1328756505.388:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    4.254686] SELinux: 2048 avtab hash slots, 97362 rules.
[    4.298909] SELinux: 2048 avtab hash slots, 97362 rules.
[    4.632101] SELinux:  9 users, 13 roles, 3912 types, 215 bools, 1 sens, 1024 cats
[    4.632112] SELinux:  82 classes, 97362 rules
[    4.643298] SELinux:  Completing initialization.
[    4.643305] SELinux:  Setting up existing superblocks.
[    4.643325] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.643339] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    4.643350] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    4.643363] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    4.643383] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.643432] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[    4.644656] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    4.644672] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    4.647074] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    4.647094] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    4.647105] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    4.647143] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    4.647160] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    4.647179] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    4.647219] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[    4.647235] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    4.648309] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.648336] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.653870] SELinux: initialized (dev sda2, type ext4), uses xattr
[    4.659170] type=1403 audit(1328756505.839:3): policy loaded auid=4294967295 ses=4294967295
[    4.675807] systemd[1]: Successfully loaded SELinux policy in 471ms 803us.
[    4.724362] systemd[1]: Successfully loaded SELinux database in 43ms 981us, size on heap is 478K.
[    4.744476] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    4.747238] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.974257] systemd[1]: Relabelled /dev and /run in 226ms 661us.
[    4.990899] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    4.996249] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.000337] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.006211] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.008931] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.014297] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.019281] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.022083] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    5.022530] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[    5.038240] systemd[1]: Set hostname to <ae>.
[    5.340295] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[    5.427513] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.508314] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[    5.539072] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[    5.833536] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    5.867460] EXT4-fs (sda2): re-mounted. Opts: (null)
[    5.972705] udevd[359]: starting version 173
[    6.121868] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[    7.047078] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.096195] atl1c 0000:01:00.0: setting latency timer to 64
[    7.162460] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    7.165299] ACPI: resource 0000:00:1f.3 [io  0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[    7.168303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.169686] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[    7.216544] iTCO_vendor_support: vendor-support=0
[    7.292088] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    7.302601] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[    7.314092] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.353282] Disabling lock debugging due to kernel taint
[    7.444042] cfg80211: Calling CRDA to update world regulatory domain
[    7.448989] mtp-probe[505]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6"
[    7.562387] microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x107
[    7.633763] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.743263] hda_intel: position_fix set to 1 for device 1043:83ce
[    7.768471] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    7.768569] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    7.811599] mtp-probe[505]: bus: 1, device: 2 was not an MTP device
[    7.866087] ALSA sound/pci/hda/patch_realtek.c:1261 SKU: Nid=0x1d sku_cfg=0x4005822d
[    7.866098] ALSA sound/pci/hda/patch_realtek.c:1263 SKU: port_connectivity=0x1
[    7.866106] ALSA sound/pci/hda/patch_realtek.c:1264 SKU: enable_pcbeep=0x0
[    7.866113] ALSA sound/pci/hda/patch_realtek.c:1265 SKU: check_sum=0x00000005
[    7.866121] ALSA sound/pci/hda/patch_realtek.c:1266 SKU: customization=0x00000082
[    7.866128] ALSA sound/pci/hda/patch_realtek.c:1267 SKU: external_amp=0x5
[    7.866136] ALSA sound/pci/hda/patch_realtek.c:1268 SKU: platform_type=0x1
[    7.866143] ALSA sound/pci/hda/patch_realtek.c:1269 SKU: swap=0x0
[    7.866150] ALSA sound/pci/hda/patch_realtek.c:1270 SKU: override=0x1
[    7.866608] ALSA sound/pci/hda/hda_codec.c:4951 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    7.866621] ALSA sound/pci/hda/hda_codec.c:4955    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.866639] ALSA sound/pci/hda/hda_codec.c:4959    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    7.866648] ALSA sound/pci/hda/hda_codec.c:4960    mono: mono_out=0x0
[    7.866655] ALSA sound/pci/hda/hda_codec.c:4964    inputs:
[    7.866663] ALSA sound/pci/hda/hda_codec.c:4968  Internal Mic=0x12
[    7.866672] ALSA sound/pci/hda/hda_codec.c:4968  Mic=0x18
[    7.866678] ALSA sound/pci/hda/hda_codec.c:4970 
[    7.871589] ALSA sound/pci/hda/patch_realtek.c:1324 realtek: No valid SSID, checking pincfg 0x4005822d for NID 0x1d
[    7.871603] ALSA sound/pci/hda/patch_realtek.c:1340 realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
[    7.900345] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.909167] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.015273] Linux media interface: v0.10
[    8.042484] Linux video capture interface: v2.00
[    8.051757] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5111)
[    8.068274] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
[    8.087260] usbcore: registered new interface driver uvcvideo
[    8.091276] USB Video Class driver (1.1.1)
[    8.288789] asus_wmi: ASUS WMI generic driver loaded
[    8.298752] asus_wmi: Initialization: 0x0
[    8.318745] microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x107
[    8.332136] asus_wmi: BIOS WMI version: 0.6
[    8.332465] asus_wmi: SFUN value: 0x0
[    8.347784] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
[    8.419358] cfg80211: World regulatory domain updated:
[    8.423555] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.424245] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.431559] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.435962] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.440360] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.444776] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.448980] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.605556] atl1c 0000:01:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.
[    8.606560] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.610663] ath9k 0000:02:00.0: setting latency timer to 64
[    8.645918] asus_wmi: Backlight controlled by ACPI video driver
[    8.671074] ath: EEPROM regdomain: 0x60
[    8.671082] ath: EEPROM indicates we should expect a direct regpair map
[    8.671092] ath: Country alpha2 being used: 00
[    8.671097] ath: Regpair used: 0x60
[    8.676172] udevd[396]: renamed network interface eth0 to p35p1
[    8.703129] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    8.703829] Registered led device: ath9k-phy0
[    8.703864] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[    8.798968] cfg80211: Calling CRDA for country: US
[    8.814148] cfg80211: Regulatory domain changed to country: US
[    8.817329] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.820581] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.823811] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.826956] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.829990] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.832941] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.835824] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.907198] rmmod[648]: ERROR: Module scsi_wait_scan does not exist in /proc/modules
[    9.640568] Adding 3043324k swap on /dev/sda3.  Priority:0 extents:1 across:3043324k SS
[    9.782307] fedora-storage-init[658]: Setting up Logical Volume Management:   No volume groups found
[    9.805404] fedora-storage-init[658]: [  OK  ]
[    9.999391] fedora-storage-init[665]: Setting up Logical Volume Management:   No volume groups found
[   10.023442] fedora-storage-init[665]: [  OK  ]
[   10.178424] lvm[671]: No volume groups found
[   10.372481] systemd-tmpfiles[676]: Successfully loaded SELinux database in 46ms 967us, size on heap is 480K.
[   10.882499] mcelog[697]: mcelog read: No such device
[   10.934392] auditctl[688]: No rules
[   10.940999] auditctl[688]: AUDIT_STATUS: enabled=0 flag=1 pid=0 rate_limit=0 backlog_limit=320 lost=0 backlog=0
[   10.946300] abrtd[698]: Init complete, entering main loop
[   10.984208] NetworkManager[693]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
[   11.012143] NetworkManager[693]: NetworkManager[693]: <info> NetworkManager (version 0.9.2-1.fc16) is starting...
[   11.035264] NetworkManager[693]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[   11.050824] NetworkManager[693]: NetworkManager[693]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
[   11.050855] auditd[685]: Started dispatcher: /sbin/audispd pid: 713
[   11.050884] audispd[713]: priority_boost_parser called with: 4
[   11.050907] audispd[713]: max_restarts_parser called with: 10
[   11.050930] audispd[713]: audispd initialized with q_depth=120 and 1 active plugins
[   11.086586] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   11.114456] iptables.init[683]: iptables: Applying firewall rules: [  OK  ]
[   11.144410] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.148306] auditd[685]: Init complete, auditd 2.1.3 listening for events (startup state enable)
[   11.197242] avahi-daemon[736]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[   11.204988] avahi-daemon[736]: Successfully dropped root privileges.
[   11.212655] avahi-daemon[736]: avahi-daemon 0.6.30 starting up.
[   11.233894] ip6tables.init[684]: ip6tables: Applying firewall rules: [  OK  ]
[   11.577283] mcelog[766]: mcelog: Unsupported new Family 6 Model 1c CPU: only decoding architectural errors
[   11.601967] chronyd[769]: chronyd version 1.26-20110831gitb088b7 starting
[   11.611093] chronyd[769]: Linux kernel major=3 minor=2 patch=3
[   11.615873] chronyd[769]: hz=100 shift_hz=7 freq_scale=1.00000000 nominal_tick=10000 slew_delta_tick=833 max_tick_bias=1000
[   11.615905] chronyd[769]: Frequency 18.287 +- 8.258 ppm read from /var/lib/chrony/drift
[   12.480270] Loading iSCSI transport class v2.0-870.
[   12.518364] iscsi: registered transport (tcp)
[   12.596962] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.677687] 8021q: 802.1Q VLAN Support v1.8
[   12.686539] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[   12.740000] ADDRCONF(NETDEV_UP): p35p1: link is not ready
[   12.756144] iscsi: registered transport (iser)
[   12.848817] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[   12.852750] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[   12.861843] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[   12.878298] iscsi: registered transport (cxgb3i)
[   12.898590] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[   12.916044] iscsi: registered transport (cxgb4i)
[   12.969121] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[   13.012203] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
[   13.026832] iscsi: registered transport (bnx2i)
[   13.111881] iscsi: registered transport (be2iscsi)
[   16.148112] wlan0: authenticate with 00:21:29:a0:c7:b2 (try 1)
[   16.154137] wlan0: authenticated
[   16.176458] wlan0: associate with 00:21:29:a0:c7:b2 (try 1)
[   16.180436] wlan0: RX AssocResp from 00:21:29:a0:c7:b2 (capab=0x411 status=0 aid=4)
[   16.180447] wlan0: associated
[   16.180458] wlan0: moving STA 00:21:29:a0:c7:b2 to state 1
[   16.180466] wlan0: moving STA 00:21:29:a0:c7:b2 to state 2
[   16.188293] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   16.212622] wlan0: moving STA 00:21:29:a0:c7:b2 to state 3
[   22.154347] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   26.626145] wlan0: no IPv6 routers present
[   31.835697] fuse init (API version 7.17)
[   31.909992] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[   31.918916] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   40.221851] lp: driver loaded but no devices found
[   40.314571] ppdev: user-space parallel port driver
[ 2398.704952] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 2782.409231] libfcoe_device_notification: NETDEV_UNREGISTER lo
[ 5395.210517] wlan0: moving STA 00:21:29:a0:c7:b2 to state 2
[ 5395.210529] wlan0: moving STA 00:21:29:a0:c7:b2 to state 1
[ 5395.210538] wlan0: moving STA 00:21:29:a0:c7:b2 to state 0
[ 5395.222364] cfg80211: Calling CRDA to update world regulatory domain
[ 5395.251929] cfg80211: World regulatory domain updated:
[ 5395.251939] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5395.251947] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.251953] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5395.251960] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5395.251966] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.251973] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.252072] cfg80211: Calling CRDA for country: US
[ 5395.264313] cfg80211: Regulatory domain changed to country: US
[ 5395.264324] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5395.264334] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 5395.264342] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 5395.264350] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.264358] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.264366] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5395.264374] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 5395.645585] ath: Failed to stop TX DMA, queues=0x001!
[ 5395.659524] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[ 5395.659538] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 5396.716618] wlan0: authenticate with 00:21:29:a0:c7:b2 (try 1)
[ 5396.720063] wlan0: authenticated
[ 5396.721865] wlan0: associate with 00:21:29:a0:c7:b2 (try 1)
[ 5396.724545] wlan0: RX ReassocResp from 00:21:29:a0:c7:b2 (capab=0x411 status=0 aid=1)
[ 5396.724556] wlan0: associated
[ 5396.724567] wlan0: moving STA 00:21:29:a0:c7:b2 to state 1
[ 5396.724575] wlan0: moving STA 00:21:29:a0:c7:b2 to state 2
[ 5396.755839] wlan0: moving STA 00:21:29:a0:c7:b2 to state 3
[14833.008618] ath_rc_get_rateindex: rate->idx = -1
[14833.008630] ath_rc_get_rateindex: rate->idx = -1
[21655.212409] wlan0: moving STA 00:21:29:a0:c7:b2 to state 2
[21655.212422] wlan0: moving STA 00:21:29:a0:c7:b2 to state 1
[21655.212431] wlan0: moving STA 00:21:29:a0:c7:b2 to state 0
[21655.223372] cfg80211: Calling CRDA to update world regulatory domain
[21655.255528] cfg80211: World regulatory domain updated:
[21655.255540] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21655.255552] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.255562] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21655.255571] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21655.255580] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.255590] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.255635] cfg80211: Calling CRDA for country: US
[21655.267252] cfg80211: Regulatory domain changed to country: US
[21655.267264] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21655.267274] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[21655.267284] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[21655.267293] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.267302] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.267311] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21655.267320] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[21655.634516] ath: Failed to stop TX DMA, queues=0x001!
[21655.648515] ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
[21655.648531] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
[21656.706769] wlan0: authenticate with 00:21:29:a0:c7:b2 (try 1)
[21656.708795] wlan0: authenticated
[21656.709575] wlan0: associate with 00:21:29:a0:c7:b2 (try 1)
[21656.712231] wlan0: RX ReassocResp from 00:21:29:a0:c7:b2 (capab=0x411 status=0 aid=1)
[21656.712242] wlan0: associated
[21656.712252] wlan0: moving STA 00:21:29:a0:c7:b2 to state 1
[21656.712260] wlan0: moving STA 00:21:29:a0:c7:b2 to state 2
[21656.734854] wlan0: moving STA 00:21:29:a0:c7:b2 to state 3