From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, Dan Carpenter <dan.carpenter@oracle.com>
Subject: [PATCH 1/3] rndis_wlan: fix le16/le32_to_cpu mix up with config.beacon_period
Date: Wed, 29 Feb 2012 16:24:54 +0200 [thread overview]
Message-ID: <20120229142454.9946.57205.stgit@localhost6.localdomain6> (raw)
'beacon_period' in 'struct ndis_80211_conf' is __le32 instead of __le16 so
le32_to_cpu must be used instead of le16_to_cpu.
Also correct 'beacon_interval' variables used for passing this value forward
from u16 to u32 and rename those variables 'beacon_period' This is to avoid
confusion because 'beacon_interval' is defined as __le16 at other structure,
'struct ndis_80211_fixed_ies'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
---
drivers/net/wireless/rndis_wlan.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index a330c69..6a6e729 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1350,7 +1350,7 @@ static int set_channel(struct usbnet *usbdev, int channel)
}
static struct ieee80211_channel *get_current_channel(struct usbnet *usbdev,
- u16 *beacon_interval)
+ u32 *beacon_period)
{
struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
struct ieee80211_channel *channel;
@@ -1370,8 +1370,8 @@ static struct ieee80211_channel *get_current_channel(struct usbnet *usbdev,
if (!channel)
return NULL;
- if (beacon_interval)
- *beacon_interval = le16_to_cpu(config.beacon_period);
+ if (beacon_period)
+ *beacon_period = le32_to_cpu(config.beacon_period);
return channel;
}
@@ -2683,7 +2683,7 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid,
s32 signal;
u64 timestamp;
u16 capability;
- u16 beacon_interval = 0;
+ u32 beacon_period = 0;
__le32 rssi;
u8 ie_buf[34];
int len, ret, ie_len;
@@ -2708,7 +2708,7 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid,
}
/* Get channel and beacon interval */
- channel = get_current_channel(usbdev, &beacon_interval);
+ channel = get_current_channel(usbdev, &beacon_period);
if (!channel) {
netdev_warn(usbdev->net, "%s(): could not get channel.\n",
__func__);
@@ -2738,11 +2738,11 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid,
netdev_dbg(usbdev->net, "%s(): channel:%d(freq), bssid:[%pM], tsf:%d, "
"capa:%x, beacon int:%d, resp_ie(len:%d, essid:'%.32s'), "
"signal:%d\n", __func__, (channel ? channel->center_freq : -1),
- bssid, (u32)timestamp, capability, beacon_interval, ie_len,
+ bssid, (u32)timestamp, capability, beacon_period, ie_len,
ssid.essid, signal);
bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid,
- timestamp, capability, beacon_interval, ie_buf, ie_len,
+ timestamp, capability, beacon_period, ie_buf, ie_len,
signal, GFP_KERNEL);
cfg80211_put_bss(bss);
}
next reply other threads:[~2012-02-29 14:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-29 14:24 Jussi Kivilinna [this message]
2012-02-29 14:25 ` [PATCH 2/3] rndis_wlan: use RNDIS_WLAN_NUM_KEYS for all key index checks Jussi Kivilinna
2012-02-29 14:25 ` [PATCH 3/3] rndis_wlan: use u8 for key indexes Jussi Kivilinna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120229142454.9946.57205.stgit@localhost6.localdomain6 \
--to=jussi.kivilinna@mbnet.fi \
--cc=dan.carpenter@oracle.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox