linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 1/3] mac80211: do remain-on-channel while idle
Date: Tue, 05 Jun 2012 14:28:40 +0200	[thread overview]
Message-ID: <20120605123058.261840574@sipsolutions.net> (raw)
In-Reply-To: 20120605122839.664762975@sipsolutions.net

From: Johannes Berg <johannes.berg@intel.com>

The IDLE handling in HW off-channel is broken right
now since we turn off IDLE only when the off-channel
period already started. Therefore, all drivers that
use it today (only iwlwifi!) must support off-channel
while idle, so playing with idle isn't needed at all.

Off-channel in general, since it's no longer used for
authentication/association, shouldn't affect PS, so
also remove that logic.

Also document a small caveat for reporting TX status
from off-channel frames in HW remain-on-channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h    |    8 +++++++-
 net/mac80211/cfg.c        |    7 +++----
 net/mac80211/iface.c      |   17 +++++++----------
 net/mac80211/mlme.c       |    6 ------
 net/mac80211/offchannel.c |    4 ----
 5 files changed, 17 insertions(+), 25 deletions(-)

--- a/include/net/mac80211.h	2012-06-05 13:58:52.000000000 +0200
+++ b/include/net/mac80211.h	2012-06-05 14:25:21.000000000 +0200
@@ -2178,7 +2178,13 @@ enum ieee80211_rate_control_changed {
  *	offload. Frames to transmit on the off-channel channel are transmitted
  *	normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
  *	duration (which will always be non-zero) expires, the driver must call
- *	ieee80211_remain_on_channel_expired(). This callback may sleep.
+ *	ieee80211_remain_on_channel_expired().
+ *	The driver must not call ieee80211_remain_on_channel_expired() before
+ *	the TX status for a frame that was sent off-channel, otherwise the TX
+ *	status is reported to userspace in an invalid way.
+ *	Note that this callback may be called while the device is in IDLE and
+ *	must be accepted in this case.
+ *	This callback may sleep.
  * @cancel_remain_on_channel: Requests that an ongoing off-channel period is
  *	aborted before it expires. This callback may sleep.
  *
--- a/net/mac80211/cfg.c	2012-06-05 14:24:11.000000000 +0200
+++ b/net/mac80211/cfg.c	2012-06-05 14:25:21.000000000 +0200
@@ -2187,8 +2187,6 @@ static int ieee80211_cancel_remain_on_ch
 	local->hw_roc_cookie = 0;
 	local->hw_roc_channel = NULL;
 
-	ieee80211_recalc_idle(local);
-
 	return 0;
 }
 
@@ -2248,7 +2246,7 @@ static int ieee80211_mgmt_tx(struct wiph
 	struct ieee80211_work *wk;
 	const struct ieee80211_mgmt *mgmt = (void *)buf;
 	u32 flags;
-	bool is_offchan = false;
+	bool is_offchan = false, in_hw_roc = false;
 
 	if (dont_wait_for_ack)
 		flags = IEEE80211_TX_CTL_NO_ACK;
@@ -2268,6 +2266,7 @@ static int ieee80211_mgmt_tx(struct wiph
 	if (chan == local->hw_roc_channel) {
 		/* TODO: check channel type? */
 		is_offchan = false;
+		in_hw_roc = true;
 		flags |= IEEE80211_TX_CTL_TX_OFFCHAN;
 	}
 
@@ -2368,7 +2367,7 @@ static int ieee80211_mgmt_tx(struct wiph
 	 * wait is involved, we might otherwise not be on
 	 * the right channel for long enough!
 	 */
-	if (!is_offchan && !wait && !sdata->vif.bss_conf.idle) {
+	if (!is_offchan && !wait && (in_hw_roc || !sdata->vif.bss_conf.idle)) {
 		ieee80211_tx_skb(sdata, skb);
 		return 0;
 	}
--- a/net/mac80211/iface.c	2012-06-05 14:22:05.000000000 +0200
+++ b/net/mac80211/iface.c	2012-06-05 14:25:21.000000000 +0200
@@ -1442,7 +1442,7 @@ u32 __ieee80211_recalc_idle(struct ieee8
 {
 	struct ieee80211_sub_if_data *sdata;
 	int count = 0;
-	bool working = false, scanning = false, hw_roc = false;
+	bool working = false, scanning = false;
 	struct ieee80211_work *wk;
 	unsigned int led_trig_start = 0, led_trig_stop = 0;
 
@@ -1479,9 +1479,11 @@ u32 __ieee80211_recalc_idle(struct ieee8
 		count++;
 	}
 
-	list_for_each_entry(wk, &local->work_list, list) {
-		working = true;
-		wk->sdata->vif.bss_conf.idle = false;
+	if (!local->ops->remain_on_channel) {
+		list_for_each_entry(wk, &local->work_list, list) {
+			working = true;
+			wk->sdata->vif.bss_conf.idle = false;
+		}
 	}
 
 	if (local->scan_sdata &&
@@ -1490,9 +1492,6 @@ u32 __ieee80211_recalc_idle(struct ieee8
 		local->scan_sdata->vif.bss_conf.idle = false;
 	}
 
-	if (local->hw_roc_channel)
-		hw_roc = true;
-
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
 		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
@@ -1504,7 +1503,7 @@ u32 __ieee80211_recalc_idle(struct ieee8
 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
 	}
 
-	if (working || scanning || hw_roc)
+	if (working || scanning)
 		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
 	else
 		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
@@ -1516,8 +1515,6 @@ u32 __ieee80211_recalc_idle(struct ieee8
 
 	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
 
-	if (hw_roc)
-		return ieee80211_idle_off(local, "hw remain-on-channel");
 	if (working)
 		return ieee80211_idle_off(local, "working");
 	if (scanning)
--- a/net/mac80211/offchannel.c	2012-06-05 14:22:05.000000000 +0200
+++ b/net/mac80211/offchannel.c	2012-06-05 14:25:21.000000000 +0200
@@ -207,8 +207,6 @@ static void ieee80211_hw_roc_start(struc
 					  GFP_KERNEL);
 	}
 
-	ieee80211_recalc_idle(local);
-
 	mutex_unlock(&local->mtx);
 }
 
@@ -244,8 +242,6 @@ static void ieee80211_hw_roc_done(struct
 	local->hw_roc_channel = NULL;
 	local->hw_roc_cookie = 0;
 
-	ieee80211_recalc_idle(local);
-
 	mutex_unlock(&local->mtx);
 }
 
--- a/net/mac80211/mlme.c	2012-06-05 14:24:17.000000000 +0200
+++ b/net/mac80211/mlme.c	2012-06-05 14:25:21.000000000 +0200
@@ -930,11 +930,6 @@ void ieee80211_recalc_ps(struct ieee8021
 		return;
 	}
 
-	if (!list_empty(&local->work_list)) {
-		local->ps_sdata = NULL;
-		goto change;
-	}
-
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (!ieee80211_sdata_running(sdata))
 			continue;
@@ -1007,7 +1002,6 @@ void ieee80211_recalc_ps(struct ieee8021
 		local->ps_sdata = NULL;
 	}
 
- change:
 	ieee80211_change_ps(local);
 }
 



  reply	other threads:[~2012-06-05 12:31 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-05 12:28 [PATCH 0/3] mac80211 remain-on-channel unification Johannes Berg
2012-06-05 12:28 ` Johannes Berg [this message]
2012-06-05 12:28 ` [PATCH 2/3] cfg80211: validate remain-on-channel time better Johannes Berg
2012-06-05 12:28 ` [PATCH 3/3] mac80211: unify SW/offload remain-on-channel Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120605123058.261840574@sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).