From: Antonio Quartulli <ordex@autistici.org>
To: Marek Lindner <lindner_marek@yahoo.de>
Cc: linux-wireless@vger.kernel.org,
Johannes Berg <johannes@sipsolutions.net>,
"John W. Linville" <linville@tuxdriver.com>
Subject: Re: [PATCH] mac80211: In IBSS the DA field of auth frames is different from BSSID
Date: Sat, 16 Jun 2012 18:52:40 +0200 [thread overview]
Message-ID: <20120616165239.GA6607@ritirata.org> (raw)
In-Reply-To: <1339865405-10787-1-git-send-email-ordex@autistici.org>
[-- Attachment #1: Type: text/plain, Size: 4161 bytes --]
Sorry John and the others,
this patchset is a mistake.
It has already been merged. I wrongly sent it over the ml again.
Cheers,
On Sat, Jun 16, 2012 at 06:50:01PM +0200, Antonio Quartulli wrote:
> In case of authentication frame exchange between two IBSS STAs, the
> DA field must contain the destinatioin address (instead of the BSSID).
>
> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> ---
> net/mac80211/ibss.c | 2 +-
> net/mac80211/ieee80211_i.h | 2 +-
> net/mac80211/util.c | 6 +++---
> net/mac80211/work.c | 5 +++--
> 4 files changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
> index b4c3031..4345e94 100644
> --- a/net/mac80211/ibss.c
> +++ b/net/mac80211/ibss.c
> @@ -57,7 +57,7 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata,
> * has actually implemented this.
> */
> if (auth_alg == WLAN_AUTH_OPEN && auth_transaction == 1)
> - ieee80211_send_auth(sdata, 2, WLAN_AUTH_OPEN, NULL, 0,
> + ieee80211_send_auth(sdata, 2, WLAN_AUTH_OPEN, NULL, 0, mgmt->sa,
> sdata->u.ibss.bssid, NULL, 0, 0);
> }
>
> diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
> index 2f0642d..ca6486b 100644
> --- a/net/mac80211/ieee80211_i.h
> +++ b/net/mac80211/ieee80211_i.h
> @@ -1396,7 +1396,7 @@ void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
> void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
> u16 transaction, u16 auth_alg,
> u8 *extra, size_t extra_len, const u8 *bssid,
> - const u8 *key, u8 key_len, u8 key_idx);
> + const u8 *da, const u8 *key, u8 key_len, u8 key_idx);
> int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
> const u8 *ie, size_t ie_len,
> enum ieee80211_band band, u32 rate_mask,
> diff --git a/net/mac80211/util.c b/net/mac80211/util.c
> index 9919892..30d72e2 100644
> --- a/net/mac80211/util.c
> +++ b/net/mac80211/util.c
> @@ -862,8 +862,8 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
>
> void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
> u16 transaction, u16 auth_alg,
> - u8 *extra, size_t extra_len, const u8 *bssid,
> - const u8 *key, u8 key_len, u8 key_idx)
> + u8 *extra, size_t extra_len, const u8 *da,
> + const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx)
> {
> struct ieee80211_local *local = sdata->local;
> struct sk_buff *skb;
> @@ -881,7 +881,7 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
> memset(mgmt, 0, 24 + 6);
> mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
> IEEE80211_STYPE_AUTH);
> - memcpy(mgmt->da, bssid, ETH_ALEN);
> + memcpy(mgmt->da, da, ETH_ALEN);
> memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
> memcpy(mgmt->bssid, bssid, ETH_ALEN);
> mgmt->u.auth.auth_alg = cpu_to_le16(auth_alg);
> diff --git a/net/mac80211/work.c b/net/mac80211/work.c
> index c6dd01a..0a1a176 100644
> --- a/net/mac80211/work.c
> +++ b/net/mac80211/work.c
> @@ -480,7 +480,8 @@ ieee80211_authenticate(struct ieee80211_work *wk)
> sdata->name, wk->filter_ta, wk->probe_auth.tries);
>
> ieee80211_send_auth(sdata, 1, wk->probe_auth.algorithm, wk->ie,
> - wk->ie_len, wk->filter_ta, NULL, 0, 0);
> + wk->ie_len, wk->filter_ta, wk->filter_ta, NULL, 0,
> + 0);
> wk->probe_auth.transaction = 2;
>
> wk->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
> @@ -598,7 +599,7 @@ static void ieee80211_auth_challenge(struct ieee80211_work *wk,
> return;
> ieee80211_send_auth(sdata, 3, wk->probe_auth.algorithm,
> elems.challenge - 2, elems.challenge_len + 2,
> - wk->filter_ta, wk->probe_auth.key,
> + wk->filter_ta, wk->filter_ta, wk->probe_auth.key,
> wk->probe_auth.key_len, wk->probe_auth.key_idx);
> wk->probe_auth.transaction = 4;
> }
> --
> 1.7.9.4
>
--
Antonio Quartulli
..each of us alone is worth nothing..
Ernesto "Che" Guevara
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2012-06-16 17:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-16 16:50 [PATCH] mac80211: In IBSS the DA field of auth frames is different from BSSID Antonio Quartulli
2012-06-16 16:50 ` [PATCH] mac80211: remove useless DA checking in ieee80211_rx_mgmt_probe_resp() Antonio Quartulli
2012-06-16 16:50 ` [PATCH] mac80211: add a 2-way Authentication challenge to IBSS mode Antonio Quartulli
2012-06-16 16:50 ` [PATCH] mac80211: in IBSS use the Auth frame to trigger STA reinsertion Antonio Quartulli
2012-06-16 16:50 ` [PATCH] cfg80211/mac80211: userspace peer authorization in IBSS Antonio Quartulli
2012-06-16 16:52 ` Antonio Quartulli [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-01-09 18:43 [PATCH] mac80211: In IBSS the DA field of auth frames is different from BSSID Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120616165239.GA6607@ritirata.org \
--to=ordex@autistici.org \
--cc=johannes@sipsolutions.net \
--cc=lindner_marek@yahoo.de \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).