* BCM4313 injection support
@ 2012-07-13 7:37 sheerapthinath
2012-07-13 9:30 ` Arend van Spriel
0 siblings, 1 reply; 6+ messages in thread
From: sheerapthinath @ 2012-07-13 7:37 UTC (permalink / raw)
To: linux-wireless
Hi linux wireless,
Is there hardware support for injection in BCM4313 wireless card(PCI
id:14e4:4727)?
I only that driver has partial support without injection. I dunno if
there is hardware support.
Can you please let me know the details?
I am also planning to buy a wireless card with full injection support
if BCM4313 is not supported.
Can you please suggest me some good cheap wireless card with full
injection support?
--
Regards,
Sheerapthinath OS
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: BCM4313 injection support
2012-07-13 7:37 BCM4313 injection support sheerapthinath
@ 2012-07-13 9:30 ` Arend van Spriel
2012-07-13 9:33 ` Johannes Berg
0 siblings, 1 reply; 6+ messages in thread
From: Arend van Spriel @ 2012-07-13 9:30 UTC (permalink / raw)
To: sheerapthinath; +Cc: linux-wireless, Johannes Berg
On 07/13/2012 09:37 AM, sheerapthinath wrote:
> Hi linux wireless,
>
> Is there hardware support for injection in BCM4313 wireless card(PCI
> id:14e4:4727)?
> I only that driver has partial support without injection. I dunno if
> there is hardware support.
> Can you please let me know the details?
>From the documentation in [1] I see that mac80211 can handle this on a
monitor interface. brcmsmac does support monitoring, but I am not sure
what functionality is needed in the brcmsmac driver for injection. Maybe
Johannes can elaborate.
> I am also planning to buy a wireless card with full injection support
> if BCM4313 is not supported.
> Can you please suggest me some good cheap wireless card with full
> injection support?
>
> --
> Regards,
> Sheerapthinath OS
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Gr. AvS
[1] http://linuxwireless.org/en/users/Documentation/packetspammer
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: BCM4313 injection support
2012-07-13 9:30 ` Arend van Spriel
@ 2012-07-13 9:33 ` Johannes Berg
2012-07-19 17:04 ` sheerapthinath
0 siblings, 1 reply; 6+ messages in thread
From: Johannes Berg @ 2012-07-13 9:33 UTC (permalink / raw)
To: Arend van Spriel; +Cc: sheerapthinath, linux-wireless
On Fri, 2012-07-13 at 11:30 +0200, Arend van Spriel wrote:
> On 07/13/2012 09:37 AM, sheerapthinath wrote:
> > Hi linux wireless,
> >
> > Is there hardware support for injection in BCM4313 wireless card(PCI
> > id:14e4:4727)?
> > I only that driver has partial support without injection. I dunno if
> > there is hardware support.
> > Can you please let me know the details?
>
> From the documentation in [1] I see that mac80211 can handle this on a
> monitor interface. brcmsmac does support monitoring, but I am not sure
> what functionality is needed in the brcmsmac driver for injection. Maybe
> Johannes can elaborate.
You just get a normal TX, but without a sta pointer.
johannes
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: BCM4313 injection support
@ 2012-07-13 18:23 Xose Vazquez Perez
0 siblings, 0 replies; 6+ messages in thread
From: Xose Vazquez Perez @ 2012-07-13 18:23 UTC (permalink / raw)
To: sheerapthinath, linux-wireless
sheerapthinath wrote:
> I am also planning to buy a wireless card with full injection support
> if BCM4313 is not supported.
> Can you please suggest me some good cheap wireless card with full
> injection support?
see:
http://aircrack-ng.blogspot.com.es/2012/01/best-card-or-best-laptopnetbook-for.html
http://www.aircrack-ng.org/doku.php?id=faq
But I like Ralink RT3070, _only_ the ones based on these PCB:
- "BL-RT3070-1Z1 2011-04-26" : http://www.ebay.com/itm/261027789537
- "WL1105 v1.3 or v1.2" : http://www.ebay.com/itm/290735667245
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: BCM4313 injection support
2012-07-13 9:33 ` Johannes Berg
@ 2012-07-19 17:04 ` sheerapthinath
2012-07-20 14:03 ` Dominique Martinet
0 siblings, 1 reply; 6+ messages in thread
From: sheerapthinath @ 2012-07-19 17:04 UTC (permalink / raw)
To: Johannes Berg; +Cc: Arend van Spriel, linux-wireless
On Fri, Jul 13, 2012 at 3:03 PM, Johannes Berg
<johannes@sipsolutions.net> wrote:
> On Fri, 2012-07-13 at 11:30 +0200, Arend van Spriel wrote:
>> On 07/13/2012 09:37 AM, sheerapthinath wrote:
>> > Hi linux wireless,
>> >
>> > Is there hardware support for injection in BCM4313 wireless card(PCI
>> > id:14e4:4727)?
>> > I only that driver has partial support without injection. I dunno if
>> > there is hardware support.
>> > Can you please let me know the details?
>>
>> From the documentation in [1] I see that mac80211 can handle this on a
>> monitor interface. brcmsmac does support monitoring, but I am not sure
>> what functionality is needed in the brcmsmac driver for injection. Maybe
>> Johannes can elaborate.
>
> You just get a normal TX, but without a sta pointer.
>
> johannes
>
As for as my hardware is concerned i could not figure out whether
there is support for injection. I know that the brcmsmac supports only
the monitoring mode. Since there is only partial support from
brcmsmac, i would like to patch to support injection.
Since iam a beginner, i don't know how to start the driver developement.
Can you please provide some documentation so that it would be helpful
in my development?
--
Regards,
Sheerapthinath OS
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: BCM4313 injection support
2012-07-19 17:04 ` sheerapthinath
@ 2012-07-20 14:03 ` Dominique Martinet
0 siblings, 0 replies; 6+ messages in thread
From: Dominique Martinet @ 2012-07-20 14:03 UTC (permalink / raw)
To: sheerapthinath; +Cc: Johannes Berg, Arend van Spriel, linux-wireless
sheerapthinath wrote on Thu, Jul 19, 2012 :
> As for as my hardware is concerned i could not figure out whether
> there is support for injection. I know that the brcmsmac supports only
> the monitoring mode. Since there is only partial support from
> brcmsmac, i would like to patch to support injection.
> Since iam a beginner, i don't know how to start the driver developement.
> Can you please provide some documentation so that it would be helpful
> in my development?
I've got a laptop with a bcm4313 and injection works fairly well since
3.3 iirc, could you doublecheck that it doesn't work? e.g. run
aireplay-ng in test mode maybe.
(As far as I saw patches come in, injection worked off the bat through
mac80211 since they added monitoring mode)
--
Dominique Martinet | Asmadeus
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-07-20 14:03 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-13 7:37 BCM4313 injection support sheerapthinath
2012-07-13 9:30 ` Arend van Spriel
2012-07-13 9:33 ` Johannes Berg
2012-07-19 17:04 ` sheerapthinath
2012-07-20 14:03 ` Dominique Martinet
-- strict thread matches above, loose matches on Subject: below --
2012-07-13 18:23 Xose Vazquez Perez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).