From: "Saul St. John" <saul.stjohn@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH 1/2] bcma: register cc core driver, device
Date: Thu, 16 Aug 2012 14:05:41 -0500 [thread overview]
Message-ID: <20120816190541.GD6726@eris.garyseven.net> (raw)
In-Reply-To: <20120816185905.GA6726@eris.garyseven.net>
This patch adds a device driver for the ChipCommon core ("bcma-cc-core"),
registers that driver during module initialization, and registers the CC
device if present with device_register().
Tested on a MacBookPro8,2 with BCM4331.
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Saul St. John <saul.stjohn@gmail.com>
---
drivers/bcma/bcma_private.h | 1 +
drivers/bcma/driver_chipcommon.c | 51 +++++++++++------
drivers/bcma/main.c | 79 ++++++++++++++-------------
include/linux/bcma/bcma_driver_chipcommon.h | 2 -
4 files changed, 75 insertions(+), 58 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 3cf9cc9..19b97f9 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -46,6 +46,7 @@ int bcma_sprom_get(struct bcma_bus *bus);
#ifdef CONFIG_BCMA_DRIVER_MIPS
void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
#endif /* CONFIG_BCMA_DRIVER_MIPS */
+extern struct bcma_driver bcma_core_cc_driver;
/* driver_chipcommon_pmu.c */
u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index a4c3ebc..8c2013c 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -22,35 +22,34 @@ static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
return value;
}
-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+static int bcma_core_cc_initialize(struct bcma_device *core)
{
u32 leddc_on = 10;
u32 leddc_off = 90;
- if (cc->setup_done)
- return;
+ struct bcma_drv_cc *cc = &core->bus->drv_cc;
- if (cc->core->id.rev >= 11)
- cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
- cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
- if (cc->core->id.rev >= 35)
- cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+ if (core->id.rev >= 11)
+ cc->status = bcma_read32(core, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_read32(core, BCMA_CC_CAP);
+ if (core->id.rev >= 35)
+ cc->capabilities_ext = bcma_read32(core, BCMA_CC_CAP_EXT);
- if (cc->core->id.rev >= 20) {
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
- bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
+ if (core->id.rev >= 20) {
+ bcma_write32(core, BCMA_CC_GPIOPULLUP, 0);
+ bcma_write32(core, BCMA_CC_GPIOPULLDOWN, 0);
}
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_init(cc);
if (cc->capabilities & BCMA_CC_CAP_PCTL)
- bcma_err(cc->core->bus, "Power control not implemented!\n");
+ bcma_err(core->bus, "Power control not implemented!\n");
- if (cc->core->id.rev >= 16) {
- if (cc->core->bus->sprom.leddc_on_time &&
- cc->core->bus->sprom.leddc_off_time) {
- leddc_on = cc->core->bus->sprom.leddc_on_time;
- leddc_off = cc->core->bus->sprom.leddc_off_time;
+ if (core->id.rev >= 16) {
+ if (core->bus->sprom.leddc_on_time &&
+ core->bus->sprom.leddc_off_time) {
+ leddc_on = core->bus->sprom.leddc_on_time;
+ leddc_off = core->bus->sprom.leddc_off_time;
}
bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
@@ -58,8 +57,26 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
}
cc->setup_done = true;
+ return 0;
}
+static struct bcma_device_id bcma_core_cc_id_table[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_CHIPCOMMON,
+ BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_CHIPCOMMON,
+ BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORETABLE_END
+};
+
+struct bcma_driver bcma_core_cc_driver = {
+ .name = "bcma-cc-core",
+ .probe = bcma_core_cc_initialize,
+ .id_table = bcma_core_cc_id_table,
+#ifdef CONFIG_PM
+ .resume = bcma_core_cc_initialize,
+#endif
+};
+
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
{
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 758af9c..498733b 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -90,13 +90,44 @@ static void bcma_release_core_dev(struct device *dev)
kfree(core);
}
+static void bcma_register_core(struct bcma_device *core)
+{
+ int err;
+
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d",
+ core->bus->num, core->core_index);
+
+ switch (core->bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ core->dev.parent = &core->bus->host_pci->dev;
+ core->dma_dev = &core->bus->host_pci->dev;
+ core->irq = core->bus->host_pci->irq;
+ break;
+ case BCMA_HOSTTYPE_SOC:
+ core->dev.dma_mask = &core->dev.coherent_dma_mask;
+ core->dma_dev = &core->dev;
+ break;
+ case BCMA_HOSTTYPE_SDIO:
+ break;
+ }
+
+ err = device_register(&core->dev);
+ if (err) {
+ bcma_err(core->bus,
+ "Could not register dev for core 0x%03X\n",
+ core->id.id);
+ }
+ core->dev_registered = true;
+}
+
static int bcma_register_cores(struct bcma_bus *bus)
{
struct bcma_device *core;
- int err, dev_id = 0;
list_for_each_entry(core, &bus->cores, list) {
- /* We support that cores ourself */
+ /* We support these cores ourself */
switch (core->id.id) {
case BCMA_CORE_4706_CHIPCOMMON:
case BCMA_CORE_CHIPCOMMON:
@@ -106,34 +137,7 @@ static int bcma_register_cores(struct bcma_bus *bus)
case BCMA_CORE_4706_MAC_GBIT_COMMON:
continue;
}
-
- core->dev.release = bcma_release_core_dev;
- core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
- core->dev.parent = &bus->host_pci->dev;
- core->dma_dev = &bus->host_pci->dev;
- core->irq = bus->host_pci->irq;
- break;
- case BCMA_HOSTTYPE_SOC:
- core->dev.dma_mask = &core->dev.coherent_dma_mask;
- core->dma_dev = &core->dev;
- break;
- case BCMA_HOSTTYPE_SDIO:
- break;
- }
-
- err = device_register(&core->dev);
- if (err) {
- bcma_err(bus,
- "Could not register dev for core 0x%03X\n",
- core->id.id);
- continue;
- }
- core->dev_registered = true;
- dev_id++;
+ bcma_register_core(core);
}
return 0;
@@ -143,7 +147,7 @@ static void bcma_unregister_cores(struct bcma_bus *bus)
{
struct bcma_device *core;
- list_for_each_entry(core, &bus->cores, list) {
+ list_for_each_entry_reverse(core, &bus->cores, list) {
if (core->dev_registered)
device_unregister(&core->dev);
}
@@ -169,7 +173,7 @@ int __devinit bcma_bus_register(struct bcma_bus *bus)
core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
- bcma_core_chipcommon_init(&bus->drv_cc);
+ bcma_register_core(core);
}
/* Init MIPS core */
@@ -251,7 +255,7 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
core = bcma_find_core(bus, bcma_cc_core_id(bus));
if (core) {
bus->drv_cc.core = core;
- bcma_core_chipcommon_init(&bus->drv_cc);
+ bcma_register_core(core);
}
/* Init MIPS core */
@@ -286,12 +290,6 @@ int bcma_bus_resume(struct bcma_bus *bus)
{
struct bcma_device *core;
- /* Init CC core */
- if (bus->drv_cc.core) {
- bus->drv_cc.setup_done = false;
- bcma_core_chipcommon_init(&bus->drv_cc);
- }
-
list_for_each_entry(core, &bus->cores, list) {
struct device_driver *drv = core->dev.driver;
if (drv) {
@@ -381,6 +379,8 @@ static int __init bcma_modinit(void)
if (err)
return err;
+ bcma_driver_register(&bcma_core_cc_driver);
+
#ifdef CONFIG_BCMA_HOST_PCI
err = bcma_host_pci_init();
if (err) {
@@ -398,6 +398,7 @@ static void __exit bcma_modexit(void)
#ifdef CONFIG_BCMA_HOST_PCI
bcma_host_pci_exit();
#endif
+ bcma_driver_unregister(&bcma_core_cc_driver);
bus_unregister(&bcma_bus_type);
}
module_exit(bcma_modexit)
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index d323a4b..f6e5858 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -469,8 +469,6 @@ struct bcma_drv_cc {
#define bcma_cc_maskset32(cc, offset, mask, set) \
bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-
extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
--
1.7.10.4
next prev parent reply other threads:[~2012-08-16 19:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-16 18:59 [PATCH 0/2] bcma: expose cc sprom for read/write in sysfs Saul St. John
2012-08-16 19:05 ` Saul St. John [this message]
2012-08-16 19:06 ` [PATCH 2/2] bcma: expose cc sprom to sysfs Saul St. John
2012-08-17 13:47 ` Arend van Spriel
2012-08-17 22:54 ` Saul St. John
2012-08-17 23:05 ` Saul St. John
2012-08-23 19:44 ` Rafał Miłecki
2012-08-23 20:53 ` Larry Finger
2012-08-24 8:37 ` Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120816190541.GD6726@eris.garyseven.net \
--to=saul.stjohn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).