* Re: iwlwifi can't connect to router after resuming from suspend. [not found] ` <1349102641.41622.YahooMailNeo@web164005.mail.gq1.yahoo.com> @ 2012-10-01 15:09 ` Dan Carpenter 2012-10-01 16:42 ` Kevin Cruz 0 siblings, 1 reply; 8+ messages in thread From: Dan Carpenter @ 2012-10-01 15:09 UTC (permalink / raw) To: Kevin Cruz Cc: linux-kernel@vger.kernel.org, Intel Linux Wireless, linux-wireless Thanks Kevin. I've filed a bug for this: https://bugzilla.kernel.org/show_bug.cgi?id=48121 And added the Intel and Linux Wireless maintainers to the CC list. Kevin's iwlwifi device does not work after a suspend resume cycle on 3.6-rc7. Doing an rmmod modprobe makes the wireless card work again. He has included a dmesg below, but I don't think it included a suspend resume cycle. Kevin, could you do a suspend, resume again and send that? regards, dan carpenter On Mon, Oct 01, 2012 at 07:44:01AM -0700, Kevin Cruz wrote: > > You can compile it under ubuntu. I looked on google to find > > > directions but everyone had bad advice. This might work: > > > apt-get build-dep linux-image-$(uname -r) > > download and unpack the kernel from kernel.org > > make localmodconfig > > make > > make modules_install install > > reboot > > > If it doesn't then having the dmesg from Sabayon live disk will have > > to be enough. We can open a bug for that on bugzilla and CC the > > wireless people. > > I was able to build and install the kernel (3.6-rc7) successfully but I > still can't connect after suspend. I'm not sure it matters but for the > `make localmodconfig` I just answered each request with whichever was > capital, and for the multi options I just answered whichever had `>` which > was always 1. The letter that is capital (like `N/y` or `Y/n`) is the > recommended answer, correct? If needed I don't mind retrying to build it > with different configurations. > > For right now, I'm gonna give some [boot options][1] I found a shot. > > [1]: http://ubuntuforums.org/showthread.php?t=1613132 > > Here's the dmesg from in my new Ubuntu kernel: > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.6.0-rc7 (cyber@cyber-linux) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sun Sep 30 09:51:00 EDT 2012 > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc7 root=UUID=4b13fd9f-6602-4289-b822-c0b28ed6f65b ro quiet splash vt.handoff=7 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] Centaur CentaurHauls > [ 0.000000] e820: BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable > [ 0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable > [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] DMI 2.7 present. > [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17F9, BIOS F.19 05/21/2012 > [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] No AGP bridge found > [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 > [ 0.000000] MTRR default type: uncachable > [ 0.000000] MTRR fixed ranges enabled: > [ 0.000000] 00000-9FFFF write-back > [ 0.000000] A0000-BFFFF uncachable > [ 0.000000] C0000-FFFFF write-protect > [ 0.000000] MTRR variable ranges enabled: > [ 0.000000] 0 base 000000000 mask F80000000 write-back > [ 0.000000] 1 base 080000000 mask FE0000000 write-back > [ 0.000000] 2 base 09D000000 mask FFF000000 uncachable > [ 0.000000] 3 base 09E000000 mask FFE000000 uncachable > [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect > [ 0.000000] 5 base 100000000 mask F00000000 write-back > [ 0.000000] 6 base 200000000 mask FC0000000 write-back > [ 0.000000] 7 base 240000000 mask FF0000000 write-back > [ 0.000000] 8 base 250000000 mask FF0000000 write-back > [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 > [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] > [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] > [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 > [ 0.000000] init_memory_mapping: [mem 0x00000000-0x9cffffff] > [ 0.000000] [mem 0x00000000-0x9cffffff] page 2M > [ 0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fb14000-0x1fffffff] > [ 0.000000] init_memory_mapping: [mem 0x100000000-0x25fdfffff] > [ 0.000000] [mem 0x100000000-0x25fdfffff] page 2M > [ 0.000000] kernel direct mapping tables up to 0x25fdfffff @ [mem 0x9ce34000-0x9ce3efff] > [ 0.000000] RAMDISK: [mem 0x37ae8000-0x37d6bfff] > [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) > [ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013) > [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > [ 0.000000] ACPI: DSDT 000000009cfeb000 0DAE4 (v01 HP INSYDE 00000000 MSFT 01000013) > [ 0.000000] ACPI: FACS 000000009cf6c000 00040 > [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: SLIC 000000009cfea000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) > [ 0.000000] ACPI: SSDT 000000009cfe9000 0051F (v01 HP INSYDE 00001000 MSFT 01000013) > [ 0.000000] ACPI: BOOT 000000009cfe7000 00028 (v01 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: ASPT 000000009cfe4000 00034 (v07 HP INSYDE 00000001 MSFT 01000013) > [ 0.000000] ACPI: SSDT 000000009cfe3000 0094E (v01 HP INSYDE 00003000 INTL 20100121) > [ 0.000000] ACPI: SSDT 000000009cfe2000 00996 (v01 HP INSYDE 00003000 INTL 20100121) > [ 0.000000] ACPI: SSDT 000000009cfe1000 002DA (v01 HP INSYDE 00003000 INTL 20100121) > [ 0.000000] ACPI: SSDT 000000009cfe0000 0035D (v01 HP INSYDE 00003000 INTL 20100121) > [ 0.000000] ACPI: SSDT 000000009cfda000 024A1 (v01 HP INSYDE 00001000 INTL 20100121) > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] > [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] > [ 0.000000] NODE_DATA [mem 0x25fdfc000-0x25fdfffff] > [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0 > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x00010000-0x00ffffff] > [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] > [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] > [ 0.000000] node 0: [mem 0x00100000-0x9ce3efff] > [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff] > [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] > [ 0.000000] On node 0 totalpages: 2083789 > [ 0.000000] DMA zone: 64 pages used for memmap > [ 0.000000] DMA zone: 6 pages reserved > [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 > [ 0.000000] DMA32 zone: 16320 pages used for memmap > [ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31 > [ 0.000000] Normal zone: 22520 pages used for memmap > [ 0.000000] Normal zone: 1418760 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) > [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs > [ 0.000000] nr_irqs_gsi: 40 > [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 > [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000 > [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000 > [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000 > [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 > [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 > [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 > [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 > [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 > [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 > [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 > [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 > [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 > [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 > [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 > [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 > [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 > [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 > [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s84416 r8192 d22080 u262144 > [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044879 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc7 root=UUID=4b13fd9f-6602-4289-b822-c0b28ed6f65b ro quiet splash vt.handoff=7 > [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.000000] __ex_table already sorted, skipping sort > [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 > [ 0.000000] Checking aperture... > [ 0.000000] No AGP bridge found > [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area > [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! > [ 0.000000] Memory: 8118728k/9959424k available (6493k kernel code, 1624268k absent, 216428k reserved, 6677k data, 920k init) > [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. > [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] Console: colour dummy device 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] hpet clockevent registered > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.004000] tsc: Detected 2195.049 MHz processor > [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.09 BogoMIPS (lpj=8780196) > [ 0.000005] pid_max: default: 32768 minimum: 301 > [ 0.000024] Security Framework initialized > [ 0.000035] AppArmor: AppArmor initialized > [ 0.000591] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) > [ 0.002340] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) > [ 0.003076] Mount-cache hash table entries: 256 > [ 0.003248] Initializing cgroup subsys cpuacct > [ 0.003250] Initializing cgroup subsys devices > [ 0.003251] Initializing cgroup subsys freezer > [ 0.003253] Initializing cgroup subsys blkio > [ 0.003254] Initializing cgroup subsys perf_event > [ 0.003276] CPU: Physical Processor ID: 0 > [ 0.003277] CPU: Processor Core ID: 0 > [ 0.003281] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.003281] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) > [ 0.003284] mce: CPU supports 9 MCE banks > [ 0.003295] CPU0: Thermal monitoring handled by SMI > [ 0.003302] process: using mwait in idle threads > [ 0.003305] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 > [ 0.003305] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 > [ 0.003305] tlb_flushall_shift is 0x5 > [ 0.005966] ACPI: Core revision 20120711 > [ 0.029862] ftrace: allocating 24288 entries in 95 pages > [ 0.043241] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.082884] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 > [ 0.188159] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. > [ 0.188165] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode > [ 0.188167] ... version: 3 > [ 0.188168] ... bit width: 48 > [ 0.188169] ... generic registers: 4 > [ 0.188170] ... value mask: 0000ffffffffffff > [ 0.188171] ... max period: 000000007fffffff > [ 0.188172] ... fixed-purpose events: 3 > [ 0.188173] ... event mask: 000000070000000f > [ 0.188345] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. > [ 0.199570] CPU1: Thermal monitoring handled by SMI > [ 0.212806] CPU2: Thermal monitoring handled by SMI > [ 0.226026] CPU3: Thermal monitoring handled by SMI > [ 0.239254] CPU4: Thermal monitoring handled by SMI > [ 0.252480] CPU5: Thermal monitoring handled by SMI > [ 0.265699] CPU6: Thermal monitoring handled by SMI > [ 0.188444] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK > [ 0.278921] CPU7: Thermal monitoring handled by SMI > [ 0.281060] Brought up 8 CPUs > [ 0.281064] smpboot: Total of 8 processors activated (35120.78 BogoMIPS) > [ 0.288921] devtmpfs: initialized > [ 0.290044] EVM: security.selinux > [ 0.290045] EVM: security.SMACK64 > [ 0.290046] EVM: security.capability > [ 0.290086] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) > [ 0.290820] dummy: > [ 0.290851] RTC time: 10:54:11, date: 09/30/12 > [ 0.290888] NET: Registered protocol family 16 > [ 0.291025] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it > [ 0.291027] ACPI: bus type pci registered > [ 0.291080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.291083] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 > [ 0.313297] PCI: Using configuration type 1 for base access > [ 0.314184] bio: create slab <bio-0> at 0 > [ 0.314250] ACPI: Added _OSI(Module Device) > [ 0.314252] ACPI: Added _OSI(Processor Device) > [ 0.314253] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.314255] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.316013] ACPI: EC: Look up EC in DSDT > [ 0.317705] ACPI: Executed 1 blocks of module-level executable AML code > [ 0.321454] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored > [ 0.321937] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) > [ 0.322389] ACPI: Dynamic OEM Table Load: > [ 0.322392] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) > [ 0.322685] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) > [ 0.323165] ACPI: Dynamic OEM Table Load: > [ 0.323167] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) > [ 0.323302] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) > [ 0.323745] ACPI: Dynamic OEM Table Load: > [ 0.323748] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) > [ 0.333502] ACPI: Interpreter enabled > [ 0.333505] ACPI: (supports S0 S3 S4 S5) > [ 0.333526] ACPI: Using IOAPIC for interrupt routing > [ 0.341379] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 > [ 0.341741] ACPI: ACPI Dock Station Driver: 1 docks/bays found > [ 0.341745] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.342026] \_SB_.PCI0:_OSC invalid UUID > [ 0.342027] _OSC request data:1 8 1f > [ 0.342032] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) > [ 0.342510] PCI host bridge to bus 0000:00 > [ 0.342514] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff] > [ 0.342516] pci_bus 0000:00: root bus resource [bus 00-fe] > [ 0.342518] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > [ 0.342520] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > [ 0.342522] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] > [ 0.342524] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] > [ 0.342532] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 > [ 0.342570] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 > [ 0.342603] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.342624] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 > [ 0.342635] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] > [ 0.342642] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] > [ 0.342646] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f] > [ 0.342703] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 > [ 0.342728] pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit] > [ 0.342807] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 0.342844] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 > [ 0.343221] pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff] > [ 0.345413] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold > [ 0.345442] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 > [ 0.345458] pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit] > [ 0.345532] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.345558] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 > [ 0.345642] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.345669] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 > [ 0.345753] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.345782] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 > [ 0.345864] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.345892] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 > [ 0.345974] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > [ 0.346013] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 > [ 0.346381] pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff] > [ 0.348578] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > [ 0.348607] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 > [ 0.348738] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 > [ 0.348758] pci 0000:00:1f.2: reg 10: [io 0x6098-0x609f] > [ 0.348767] pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf] > [ 0.348775] pci 0000:00:1f.2: reg 18: [io 0x6090-0x6097] > [ 0.348784] pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb] > [ 0.348793] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f] > [ 0.348802] pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff] > [ 0.348850] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.348871] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 > [ 0.348887] pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit] > [ 0.348910] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f] > [ 0.348962] pci_bus 0000:01: busn_res: [bus 01-06] is inserted under [bus 00-fe] > [ 0.348975] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000 > [ 0.348992] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] > [ 0.349005] pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit] > [ 0.349014] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff] > [ 0.349031] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] > [ 0.349071] pci 0000:01:00.0: supports D1 D2 > [ 0.355991] pci 0000:00:01.0: PCI bridge to [bus 01-06] > [ 0.355999] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] > [ 0.356006] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] > [ 0.356015] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] > [ 0.356094] pci_bus 0000:07: busn_res: [bus 07-0c] is inserted under [bus 00-fe] > [ 0.356121] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.356142] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff] > [ 0.356178] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] > [ 0.356200] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] > [ 0.356295] pci 0000:07:00.0: supports D1 D2 > [ 0.356297] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.363989] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] > [ 0.363998] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > [ 0.364008] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] > [ 0.364021] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] > [ 0.364093] pci_bus 0000:0d: busn_res: [bus 0d-12] is inserted under [bus 00-fe] > [ 0.364263] pci 0000:0d:00.0: [8086:0084] type 00 class 0x028000 > [ 0.364418] pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4501fff 64bit] > [ 0.365158] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold > [ 0.372098] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] > [ 0.372103] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > [ 0.372107] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] > [ 0.372114] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] > [ 0.372160] pci_bus 0000:13: busn_res: [bus 13-18] is inserted under [bus 00-fe] > [ 0.372187] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000 > [ 0.372212] pci 0000:13:00.0: reg 10: [mem 0xc3501000-0xc3501fff] > [ 0.372301] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] > [ 0.372374] pci 0000:13:00.0: supports D1 D2 > [ 0.372375] pci 0000:13:00.0: PME# supported from D1 D2 D3hot > [ 0.372429] pci 0000:13:00.1: [10ec:5209] type 00 class 0x080500 > [ 0.372454] pci 0000:13:00.1: reg 10: [mem 0xc3500000-0xc35000ff] > [ 0.372610] pci 0000:13:00.1: supports D1 D2 > [ 0.372612] pci 0000:13:00.1: PME# supported from D1 D2 D3hot > [ 0.379979] pci 0000:00:1c.2: PCI bridge to [bus 13-18] > [ 0.379989] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.379998] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] > [ 0.380012] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] > [ 0.380079] pci_bus 0000:19: busn_res: [bus 19] is inserted under [bus 00-fe] > [ 0.380183] pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330 > [ 0.380238] pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit] > [ 0.380462] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold > [ 0.388016] pci 0000:00:1c.3: PCI bridge to [bus 19] > [ 0.388037] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] > [ 0.388067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.388187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.388218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.388246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > [ 0.388273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] > [ 0.388312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] > [ 0.388382] \_SB_.PCI0:_OSC invalid UUID > [ 0.388383] _OSC request data:1 1f 1f > [ 0.388386] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM > [ 0.388388] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) > [ 0.391593] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 > [ 0.391638] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15) > [ 0.391680] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15) > [ 0.391724] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) > [ 0.391766] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. > [ 0.391810] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15) > [ 0.391854] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) > [ 0.391896] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) > [ 0.391973] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none > [ 0.391980] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none > [ 0.391982] vgaarb: loaded > [ 0.391983] vgaarb: bridge control possible 0000:01:00.0 > [ 0.391984] vgaarb: no bridge control possible 0000:00:02.0 > [ 0.392083] SCSI subsystem initialized > [ 0.392085] ACPI: bus type scsi registered > [ 0.392113] libata version 3.00 loaded. > [ 0.392129] ACPI: bus type usb registered > [ 0.392145] usbcore: registered new interface driver usbfs > [ 0.392152] usbcore: registered new interface driver hub > [ 0.392168] usbcore: registered new device driver usb > [ 0.392229] PCI: Using ACPI for IRQ routing > [ 0.400654] PCI: pci_cache_line_size set to 64 bytes > [ 0.400839] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] > [ 0.400841] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff] > [ 0.400843] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] > [ 0.400844] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] > [ 0.400918] NetLabel: Initializing > [ 0.400919] NetLabel: domain hash size = 128 > [ 0.400920] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.400929] NetLabel: unlabeled traffic allowed by default > [ 0.400975] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 > [ 0.400981] hpet0: 8 comparators, 64-bit 14.318180 MHz counter > [ 0.402992] Switching to clocksource hpet > [ 0.408439] AppArmor: AppArmor Filesystem Enabled > [ 0.408457] pnp: PnP ACPI init > [ 0.408471] ACPI: bus type pnp registered > [ 0.408745] pnp 00:00: [bus 00-fe] > [ 0.408748] pnp 00:00: [io 0x0000-0x0cf7 window] > [ 0.408750] pnp 00:00: [io 0x0cf8-0x0cff] > [ 0.408752] pnp 00:00: [io 0x0d00-0xffff window] > [ 0.408754] pnp 00:00: [mem 0x000a0000-0x000bffff window] > [ 0.408756] pnp 00:00: [mem 0x000c0000-0x000c3fff window] > [ 0.408757] pnp 00:00: [mem 0x000c4000-0x000c7fff window] > [ 0.408759] pnp 00:00: [mem 0x000c8000-0x000cbfff window] > [ 0.408761] pnp 00:00: [mem 0x000cc000-0x000cffff window] > [ 0.408763] pnp 00:00: [mem 0x000d0000-0x000d3fff window] > [ 0.408764] pnp 00:00: [mem 0x000d4000-0x000d7fff window] > [ 0.408766] pnp 00:00: [mem 0x000d8000-0x000dbfff window] > [ 0.408768] pnp 00:00: [mem 0x000dc000-0x000dffff window] > [ 0.408770] pnp 00:00: [mem 0x000e0000-0x000e3fff window] > [ 0.408771] pnp 00:00: [mem 0x000e4000-0x000e7fff window] > [ 0.408773] pnp 00:00: [mem 0x000e8000-0x000ebfff window] > [ 0.408775] pnp 00:00: [mem 0x000ec000-0x000effff window] > [ 0.408777] pnp 00:00: [mem 0x000f0000-0x000fffff window] > [ 0.408778] pnp 00:00: [mem 0x9fa00000-0xfeafffff window] > [ 0.408832] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) > [ 0.408850] pnp 00:01: [io 0x0000-0x001f] > [ 0.408853] pnp 00:01: [io 0x0081-0x0091] > [ 0.408855] pnp 00:01: [io 0x0093-0x009f] > [ 0.408856] pnp 00:01: [io 0x00c0-0x00df] > [ 0.408858] pnp 00:01: [dma 4] > [ 0.408877] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) > [ 0.408886] pnp 00:02: [mem 0xff000000-0xffffffff] > [ 0.408903] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) > [ 0.408974] pnp 00:03: [mem 0xfed00000-0xfed003ff] > [ 0.408993] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) > [ 0.409001] pnp 00:04: [io 0x00f0] > [ 0.409011] pnp 00:04: [irq 13] > [ 0.409027] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) > [ 0.409036] pnp 00:05: [io 0x002e-0x002f] > [ 0.409038] pnp 00:05: [io 0x004e-0x004f] > [ 0.409039] pnp 00:05: [io 0x0061] > [ 0.409041] pnp 00:05: [io 0x0063] > [ 0.409043] pnp 00:05: [io 0x0065] > [ 0.409044] pnp 00:05: [io 0x0067] > [ 0.409046] pnp 00:05: [io 0x0070] > [ 0.409047] pnp 00:05: [io 0x0080] > [ 0.409049] pnp 00:05: [io 0x0092] > [ 0.409050] pnp 00:05: [io 0x00b2-0x00b3] > [ 0.409052] pnp 00:05: [io 0x0680-0x069f] > [ 0.409053] pnp 00:05: [io 0x1000-0x100f] > [ 0.409055] pnp 00:05: [io 0x1010-0x1013] > [ 0.409057] pnp 00:05: [io 0xffff] > [ 0.409058] pnp 00:05: [io 0x0400-0x0453] > [ 0.409060] pnp 00:05: [io 0x0458-0x047f] > [ 0.409061] pnp 00:05: [io 0x0500-0x057f] > [ 0.409063] pnp 00:05: [io 0x164e-0x164f] > [ 0.409104] system 00:05: [io 0x0680-0x069f] has been reserved > [ 0.409106] system 00:05: [io 0x1000-0x100f] has been reserved > [ 0.409108] system 00:05: [io 0x1010-0x1013] has been reserved > [ 0.409110] system 00:05: [io 0xffff] has been reserved > [ 0.409112] system 00:05: [io 0x0400-0x0453] has been reserved > [ 0.409114] system 00:05: [io 0x0458-0x047f] has been reserved > [ 0.409116] system 00:05: [io 0x0500-0x057f] has been reserved > [ 0.409118] system 00:05: [io 0x164e-0x164f] has been reserved > [ 0.409121] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.409128] pnp 00:06: [io 0x0070-0x0077] > [ 0.409133] pnp 00:06: [irq 8] > [ 0.409150] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) > [ 0.409167] pnp 00:07: [io 0x0454-0x0457] > [ 0.409196] system 00:07: [io 0x0454-0x0457] has been reserved > [ 0.409198] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) > [ 0.409225] pnp 00:08: [io 0x0060] > [ 0.409227] pnp 00:08: [io 0x0064] > [ 0.409232] pnp 00:08: [irq 1] > [ 0.409251] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) > [ 0.409279] pnp 00:09: [irq 12] > [ 0.409298] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active) > [ 0.409386] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] > [ 0.409388] pnp 00:0a: [mem 0xfed10000-0xfed17fff] > [ 0.409390] pnp 00:0a: [mem 0xfed18000-0xfed18fff] > [ 0.409392] pnp 00:0a: [mem 0xfed19000-0xfed19fff] > [ 0.409393] pnp 00:0a: [mem 0xe0000000-0xefffffff] > [ 0.409395] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] > [ 0.409397] pnp 00:0a: [mem 0xfed90000-0xfed93fff] > [ 0.409398] pnp 00:0a: [mem 0xff000000-0xffffffff] > [ 0.409400] pnp 00:0a: [mem 0xfee00000-0xfeefffff] > [ 0.409402] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff] > [ 0.409438] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved > [ 0.409440] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved > [ 0.409442] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved > [ 0.409444] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved > [ 0.409446] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved > [ 0.409448] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved > [ 0.409450] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved > [ 0.409452] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved > [ 0.409454] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved > [ 0.409456] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved > [ 0.409459] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) > [ 0.410493] pnp 00:0b: [irq 23] > [ 0.410530] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) > [ 0.410549] pnp 00:0c: [mem 0x20000000-0x201fffff] > [ 0.410551] pnp 00:0c: [mem 0x40000000-0x401fffff] > [ 0.410598] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved > [ 0.410600] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved > [ 0.410603] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) > [ 0.410619] pnp: PnP ACPI: found 13 devices > [ 0.410620] ACPI: ACPI bus type pnp unregistered > [ 0.416844] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] > [ 0.416848] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] > [ 0.416890] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref] > [ 0.416892] pci 0000:00:01.0: PCI bridge to [bus 01-06] > [ 0.416895] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] > [ 0.416898] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] > [ 0.416901] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] > [ 0.416904] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] > [ 0.416908] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] > [ 0.416913] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] > [ 0.416918] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] > [ 0.416925] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] > [ 0.416928] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] > [ 0.416933] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] > [ 0.416938] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] > [ 0.416945] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref] > [ 0.416947] pci 0000:00:1c.2: PCI bridge to [bus 13-18] > [ 0.416950] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] > [ 0.416956] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] > [ 0.416960] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] > [ 0.416967] pci 0000:00:1c.3: PCI bridge to [bus 19] > [ 0.416973] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] > [ 0.417016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] > [ 0.417018] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] > [ 0.417020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] > [ 0.417022] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] > [ 0.417024] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] > [ 0.417026] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff] > [ 0.417028] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] > [ 0.417030] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] > [ 0.417031] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff] > [ 0.417033] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] > [ 0.417035] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] > [ 0.417037] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff] > [ 0.417038] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] > [ 0.417040] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff] > [ 0.417042] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff] > [ 0.417044] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref] > [ 0.417046] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff] > [ 0.417072] NET: Registered protocol family 2 > [ 0.417652] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) > [ 0.418889] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [ 0.419037] TCP: Hash tables configured (established 524288 bind 65536) > [ 0.419052] TCP: reno registered > [ 0.419065] UDP hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.419097] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) > [ 0.419179] NET: Registered protocol family 1 > [ 0.419193] pci 0000:00:02.0: Boot video device > [ 0.462894] PCI: CLS 64 bytes, default 64 > [ 0.462945] Trying to unpack rootfs image as initramfs... > [ 0.510156] Freeing initrd memory: 2576k freed > [ 0.510423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.510426] software IO TLB [mem 0x98e34000-0x9ce33fff] (64MB) mapped at [ffff880098e34000-ffff88009ce33fff] > [ 0.510460] Simple Boot Flag at 0x44 set to 0x1 > [ 0.510915] audit: initializing netlink socket (disabled) > [ 0.510930] type=2000 audit(1349002450.384:1): initialized > [ 0.531716] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.533314] VFS: Disk quotas dquot_6.5.2 > [ 0.533351] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.533709] fuse init (API version 7.20) > [ 0.533775] msgmni has been set to 15861 > [ 0.534059] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > [ 0.534084] io scheduler noop registered > [ 0.534086] io scheduler deadline registered > [ 0.534112] io scheduler cfq registered (default) > [ 0.534201] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X > [ 0.534423] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.534441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > [ 0.534476] intel_idle: MWAIT substates: 0x21120 > [ 0.534478] intel_idle: v0.4 model 0x2A > [ 0.534479] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 0.536573] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > [ 0.537387] ACPI: AC Adapter [AC] (on-line) > [ 0.537457] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0 > [ 0.543610] ACPI: Lid Switch [LID] > [ 0.543651] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > [ 0.543655] ACPI: Power Button [PWRB] > [ 0.543684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 > [ 0.543686] ACPI: Power Button [PWRF] > [ 0.543746] ACPI: Requesting acpi_cpufreq > [ 0.561004] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.561010] ACPI: Thermal Zone [THRM] (56 C) > [ 0.561041] GHES: HEST is not enabled! > [ 0.561097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled > [ 0.567238] Linux agpgart interface v0.103 > [ 0.568356] brd: module loaded > [ 0.568908] loop: module loaded > [ 0.568992] ahci 0000:00:1f.2: version 3.0 > [ 0.569050] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X > [ 0.582847] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode > [ 0.582856] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst > [ 0.582875] ahci 0000:00:1f.2: setting latency timer to 64 > [ 0.591201] scsi0 : ahci > [ 0.591264] scsi1 : ahci > [ 0.591322] scsi2 : ahci > [ 0.591380] scsi3 : ahci > [ 0.591433] scsi4 : ahci > [ 0.591486] scsi5 : ahci > [ 0.591517] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41 > [ 0.591519] ata2: DUMMY > [ 0.591520] ata3: DUMMY > [ 0.591521] ata4: DUMMY > [ 0.591522] ata5: DUMMY > [ 0.591524] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41 > [ 0.591791] libphy: Fixed MDIO Bus: probed > [ 0.591803] tun: Universal TUN/TAP device driver, 1.6 > [ 0.591804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> > [ 0.591840] PPP generic driver version 2.4.2 > [ 0.591907] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.591932] ehci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 0.591935] ehci_hcd 0000:00:1a.0: EHCI Host Controller > [ 0.591970] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 > [ 0.592546] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared > [ 0.592550] ACPI: Battery Slot [BAT0] (battery present) > [ 0.595879] ehci_hcd 0000:00:1a.0: debug port 2 > [ 0.595888] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported > [ 0.595902] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000 > [ 0.606788] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 0.606947] hub 1-0:1.0: USB hub found > [ 0.606950] hub 1-0:1.0: 2 ports detected > [ 0.607012] ehci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 0.607015] ehci_hcd 0000:00:1d.0: EHCI Host Controller > [ 0.607054] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > [ 0.610940] ehci_hcd 0000:00:1d.0: debug port 2 > [ 0.610947] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported > [ 0.610961] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000 > [ 0.622770] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 0.622910] hub 2-0:1.0: USB hub found > [ 0.622913] hub 2-0:1.0: 2 ports detected > [ 0.622958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.622966] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.623006] xhci_hcd 0000:19:00.0: xHCI Host Controller > [ 0.623039] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3 > [ 0.623239] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000 > [ 0.623330] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X > [ 0.623336] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X > [ 0.623341] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X > [ 0.623347] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X > [ 0.623352] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X > [ 0.623357] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X > [ 0.623362] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X > [ 0.623367] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X > [ 0.623568] xHCI xhci_add_endpoint called for root hub > [ 0.623569] xHCI xhci_check_bandwidth called for root hub > [ 0.623586] hub 3-0:1.0: USB hub found > [ 0.623594] hub 3-0:1.0: 2 ports detected > [ 0.623644] xhci_hcd 0000:19:00.0: xHCI Host Controller > [ 0.623671] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4 > [ 0.626686] xHCI xhci_add_endpoint called for root hub > [ 0.626687] xHCI xhci_check_bandwidth called for root hub > [ 0.626703] hub 4-0:1.0: USB hub found > [ 0.626716] hub 4-0:1.0: 2 ports detected > [ 0.626836] usbcore: registered new interface driver libusual > [ 0.626863] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > [ 0.637542] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.637547] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.637645] mousedev: PS/2 mouse device common for all mice > [ 0.637817] rtc_cmos 00:06: RTC can wake from S4 > [ 0.637929] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 0.637956] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs > [ 0.638012] device-mapper: uevent: version 1.0.3 > [ 0.638059] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com > [ 0.638198] cpuidle: using governor ladder > [ 0.638373] cpuidle: using governor menu > [ 0.638374] EFI Variables Facility v0.08 2004-May-17 > [ 0.638429] TCP: cubic registered > [ 0.638506] NET: Registered protocol family 10 > [ 0.638644] NET: Registered protocol family 17 > [ 0.638652] Key type dns_resolver registered > [ 0.638943] PM: Hibernation image not present or could not be loaded. > [ 0.638953] registered taskstats version 1 > [ 0.640755] Key type trusted registered > [ 0.642409] Key type encrypted registered > [ 0.644556] Magic number: 12:224:933 > [ 0.644662] rtc_cmos 00:06: setting system clock to 2012-09-30 10:54:11 UTC (1349002451) > [ 0.646002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 0.646003] EDD information not available. > [ 0.646804] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 > [ 0.910539] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 0.913034] ata6.00: ATAPI: hp BD E DS6E2LH, FH62, max UDMA/100 > [ 0.914627] ata6.00: configured for UDMA/100 > [ 0.918528] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 0.918535] usb 1-1: new high-speed USB device number 2 using ehci_hcd > [ 0.920148] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100 > [ 0.920158] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA > [ 0.921912] ata1.00: configured for UDMA/100 > [ 0.922155] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5 > [ 0.922324] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) > [ 0.922325] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 0.922328] sd 0:0:0:0: [sda] 4096-byte physical blocks > [ 0.922540] sd 0:0:0:0: [sda] Write Protect is off > [ 0.922544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.922657] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 0.926530] scsi 5:0:0:0: CD-ROM hp BD E DS6E2LH FH62 PQ: 0 ANSI: 5 > [ 0.930475] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > [ 0.930483] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 0.930679] sr 5:0:0:0: Attached scsi CD-ROM sr0 > [ 0.930836] sr 5:0:0:0: Attached scsi generic sg1 type 5 > [ 1.011958] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > > [ 1.013243] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.014402] Freeing unused kernel memory: 920k freed > [ 1.014489] Write protecting the kernel read-only data: 12288k > [ 1.018529] Freeing unused kernel memory: 1688k freed > [ 1.021760] Freeing unused kernel memory: 1320k freed > [ 1.034486] udevd[138]: starting version 175 > [ 1.050866] hub 1-1:1.0: USB hub found > [ 1.050938] hub 1-1:1.0: 6 ports detected > [ 1.058140] sdhci: Secure Digital Host Controller Interface driver > [ 1.058143] sdhci: Copyright(c) Pierre Ossman > [ 1.058848] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1) > [ 1.058891] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.058897] mmc0: no vmmc regulator found > [ 1.058915] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.058947] Registered led device: mmc0:: > [ 1.062500] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 1.062755] r8169 0000:07:00.0: irq 50 for MSI/MSI-X > [ 1.062969] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 08:2e:5f:82:40:38, XID 0c900800 IRQ 50 > [ 1.062973] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] > [ 1.090339] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA > [ 1.093880] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.129843] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.162254] usb 2-1: new high-speed USB device number 2 using ehci_hcd > [ 1.165862] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.201336] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. > [ 1.294989] hub 2-1:1.0: USB hub found > [ 1.295050] hub 2-1:1.0: 6 ports detected > [ 1.366114] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd > [ 1.505874] tsc: Refined TSC clocksource calibration: 2195.015 MHz > [ 1.505888] Switching to clocksource tsc > [ 1.529982] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd > [ 1.750298] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) > [ 9.320288] udevd[448]: starting version 175 > [ 9.320895] Adding 12582908k swap on /dev/sda6. Priority:-1 extents:1 across:12582908k > [ 9.415485] type=1400 audit(1349016860.275:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=546 comm="apparmor_parser" > [ 9.415494] type=1400 audit(1349016860.275:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=606 comm="apparmor_parser" > [ 9.415761] type=1400 audit(1349016860.275:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser" > [ 9.415770] type=1400 audit(1349016860.275:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser" > [ 9.415918] type=1400 audit(1349016860.275:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser" > [ 9.415929] type=1400 audit(1349016860.275:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser" > [ 9.556661] wmi: Mapper loaded > [ 9.849239] mei 0000:00:16.0: setting latency timer to 64 > [ 9.849294] mei 0000:00:16.0: irq 51 for MSI/MSI-X > [ 9.860890] lp: driver loaded but no devices found > [ 9.861904] mei 0000:00:16.0: wd: failed to find the client > [ 9.983470] input: HP WMI hotkeys as /devices/virtual/input/input4 > [ 10.153427] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. > [ 10.154072] Initializing Realtek PCIE storage driver... > [ 10.154160] Resource length: 0x1000 > [ 10.154173] Original address: 0xc3501000, remapped address: 0xffffc90000c6c000 > [ 10.154176] pci->irq = 18 > [ 10.154177] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18 > [ 10.356372] scsi6 : SCSI emulation for PCI-Express Mass Storage devices > [ 10.356530] rts_pstor: waiting for device to settle before scanning > [ 10.373036] cfg80211: Calling CRDA to update world regulatory domain > [ 10.376044] cfg80211: World regulatory domain updated: > [ 10.376047] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > [ 10.376049] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 10.376050] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 10.376051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > [ 10.376052] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 10.376054] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > [ 10.541266] hp_accel: laptop model unknown, using default axes configuration > [ 10.624300] [drm] Initialized drm 1.1.0 20060810 > [ 10.669214] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294 > [ 10.713183] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 > [ 11.056401] Intel(R) Wireless WiFi driver for Linux, in-tree: > [ 11.056403] Copyright(c) 2003-2012 Intel Corporation > [ 11.056526] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000 > [ 11.056528] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc900118ac000 > [ 11.056529] iwlwifi 0000:0d:00.0: HW Revision ID = 0x0 > [ 11.056864] iwlwifi 0000:0d:00.0: irq 52 for MSI/MSI-X > [ 11.108910] iwlwifi 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138 > [ 11.159845] lis3lv02d: 8 bits 3DC sensor found > [ 11.355016] rts_pstor: device scan complete > [ 11.355232] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS > [ 11.355430] sd 6:0:0:0: Attached scsi generic sg2 type 0 > [ 0.930948] ACPI: Invalid Power Resource to register! > [ 11.355481] sd 6:0:0:0: [sdb] Attached SCSI removable disk > [ 11.606830] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 > [ 11.607077] Registered led device: hp::hddprotect > [ 11.607090] hp_accel: driver loaded > [ 12.360896] pci 0000:00:00.0: Intel Sandybridge Chipset > [ 12.360959] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable > [ 12.361920] pci 0000:00:00.0: detected 32768K stolen memory > [ 12.362003] i915 0000:00:02.0: setting latency timer to 64 > [ 12.382707] i915 0000:00:02.0: irq 53 for MSI/MSI-X > [ 12.382713] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 12.382714] [drm] Driver supports precise vblank timestamp query. > [ 12.383447] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem > [ 12.383449] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0 > [ 12.439228] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: > [ 12.439231] iwldvm: Copyright(c) 2003-2012 Intel Corporation > [ 12.439244] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG disabled > [ 12.439246] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS enabled > [ 12.439247] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled > [ 12.439248] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled > [ 12.439249] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P enabled > [ 12.439251] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C > [ 12.439397] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S > [ 12.446731] iwlwifi 0000:0d:00.0: RF_KILL bit toggled to enable radio. > [ 12.460652] iwlwifi 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6 > [ 12.460654] iwlwifi 0000:0d:00.0: Device SKU: 0x50 > [ 12.460656] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3 > [ 12.460779] Registered led device: phy0-led > [ 12.460797] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain > [ 12.488719] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' > [ 12.787134] [drm] radeon defaulting to kernel modesetting. > [ 12.787137] [drm] radeon kernel modesetting enabled. > [ 12.787148] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle > [ 12.787187] radeon 0000:01:00.0: enabling device (0000 -> 0003) > [ 12.870146] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off > [ 13.008928] fbcon: inteldrmfb (fb0) is primary device > [ 13.047695] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro > [ 13.209024] Console: switching to colour frame buffer device 170x48 > [ 13.210832] fb0: inteldrmfb frame buffer device > [ 13.210833] drm: registered panic notifier > [ 13.210960] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS > [ 13.220013] acpi device:2f: registered as cooling_device8 > [ 13.220122] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) > [ 13.220153] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input7 > [ 13.231301] acpi device:3c: registered as cooling_device9 > [ 13.231437] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) > [ 13.231475] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8 > [ 13.231532] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 13.231671] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X > [ 13.231842] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1656). > [ 13.231864] [drm] register mmio base: 0xC6500000 > [ 13.231865] [drm] register mmio size: 131072 > [ 13.231867] vga_switcheroo: enabled > [ 13.231947] radeon atpx: version is 1 > [ 13.308468] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) > [ 13.331906] ATOM BIOS: HP/Flex > [ 13.332269] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) > [ 13.332271] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF > [ 13.332276] mtrr: no more MTRRs available > [ 13.332278] [drm] Detected VRAM RAM=1024M, BAR=256M > [ 13.332279] [drm] RAM width 64bits DDR > [ 13.332316] [TTM] Zone kernel: Available graphics memory: 4062616 kiB > [ 13.332318] [TTM] Zone dma32: Available graphics memory: 2097152 kiB > [ 13.332319] [TTM] Initializing pool allocator > [ 13.332321] [TTM] Initializing DMA pool allocator > [ 13.332336] [drm] radeon: 1024M of VRAM memory ready > [ 13.332338] [drm] radeon: 512M of GTT memory ready. > [ 13.332351] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 13.332352] [drm] Driver supports precise vblank timestamp query. > [ 13.332393] radeon 0000:01:00.0: irq 55 for MSI/MSI-X > [ 13.332402] radeon 0000:01:00.0: radeon: using MSI. > [ 13.332438] [drm] radeon: irq initialized. > [ 13.332441] [drm] GART: num cpu pages 131072, num gpu pages 131072 > [ 13.332719] [drm] probing gen 2 caps for device 8086:101 = 2/0 > [ 13.332721] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 > [ 13.332780] [drm] Loading CAICOS Microcode > [ 13.338674] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). > [ 13.338790] radeon 0000:01:00.0: WB enabled > [ 13.338792] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880251da5c00 > [ 13.355158] [drm] ring test on 0 succeeded in 3 usecs > [ 13.355371] [drm] ib test on ring 0 succeeded in 0 usecs > [ 13.355530] [drm] Radeon Display Connectors > [ 13.360994] [drm] Internal thermal controller with fan control > [ 13.361983] [drm] radeon: power management initialized > [ 13.362053] No connectors reported connected with modes > [ 13.362055] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 13.363413] [drm] fb mappable at 0xA0142000 > [ 13.363414] [drm] vram apper at 0xA0000000 > [ 13.363415] [drm] size 3145728 > [ 13.363415] [drm] fb depth is 24 > [ 13.363416] [drm] pitch is 4096 > [ 13.363512] fb1: radeondrmfb frame buffer device > [ 13.363516] [drm] Initialized radeon 2.22.0 20080528 for 0000:01:00.0 on minor 1 > [ 13.565858] init: failsafe main process (869) killed by TERM signal > [ 13.685961] ppdev: user-space parallel port driver > [ 13.709743] type=1400 audit(1349016864.575:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=950 comm="apparmor_parser" > [ 13.709753] type=1400 audit(1349016864.575:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=949 comm="apparmor_parser" > [ 13.710027] type=1400 audit(1349016864.575:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=950 comm="apparmor_parser" > [ 13.710189] type=1400 audit(1349016864.575:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=950 comm="apparmor_parser" > [ 13.850352] r8169 0000:07:00.0: eth0: link down > [ 13.850387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 13.851907] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S > [ 13.859309] iwlwifi 0000:0d:00.0: Radio type=0x0-0x0-0x3 > [ 13.891741] init: alsa-restore main process (1015) terminated with status 19 > [ 13.914638] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S > [ 13.922059] iwlwifi 0000:0d:00.0: Radio type=0x0-0x0-0x3 > [ 13.977202] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 14.199758] Bluetooth: Core ver 2.16 > [ 14.199774] NET: Registered protocol family 31 > [ 14.199775] Bluetooth: HCI device and connection manager initialized > [ 14.199776] Bluetooth: HCI socket layer initialized > [ 14.199777] Bluetooth: L2CAP socket layer initialized > [ 14.199780] Bluetooth: SCO socket layer initialized > [ 14.200602] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > [ 14.200680] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 > [ 14.200747] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > [ 14.275702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 14.275704] Bluetooth: BNEP filters: protocol multicast > [ 14.317095] Bluetooth: RFCOMM TTY layer initialized > [ 14.317100] Bluetooth: RFCOMM socket layer initialized > [ 14.317101] Bluetooth: RFCOMM ver 1.11 > [ 14.580144] init: plymouth-stop pre-start process (1268) terminated with status 1 > [ 16.089581] wlan0: authenticate with 30:46:9a:68:a9:52 > [ 16.109633] wlan0: send auth to 30:46:9a:68:a9:52 (try 1/3) > [ 16.111490] wlan0: authenticated > [ 16.113740] wlan0: associate with 30:46:9a:68:a9:52 (try 1/3) > [ 16.117539] wlan0: RX AssocResp from 30:46:9a:68:a9:52 (capab=0x411 status=0 aid=1) > [ 16.120671] wlan0: associated > [ 16.120693] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 21.358865] hp_wmi: Unknown event_id - 10 - 0x1 > [ 317.847375] audit_printk_skb: 45 callbacks suppressed > [ 317.847378] type=1400 audit(1349017169.135:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=985 comm="cupsd" pid=985 comm="cupsd" capability=36 capname="block_suspend" ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: iwlwifi can't connect to router after resuming from suspend. 2012-10-01 15:09 ` iwlwifi can't connect to router after resuming from suspend Dan Carpenter @ 2012-10-01 16:42 ` Kevin Cruz 2012-10-01 19:31 ` Johannes Berg 0 siblings, 1 reply; 8+ messages in thread From: Kevin Cruz @ 2012-10-01 16:42 UTC (permalink / raw) To: Dan Carpenter Cc: Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org > Thanks Kevin. > I've filed a bug for this: > https://bugzilla.kernel.org/show_bug.cgi?id=48121 > And added the Intel and Linux Wireless maintainers to the CC list. Thanks you for all your help, Dan! > Kevin's iwlwifi device does not work after a suspend resume cycle > on 3.6-rc7. Doing an rmmod modprobe makes the wireless card work > again. Actually rmmod modprobe used to work on my Ubuntu 11.10 (kernel 3.0) but no longer resolves the issue in Ubuntu 12.04 (kernel 3.2). > He has included a dmesg below, but I don't think it included > a suspend resume cycle. Kevin, could you do a suspend, resume again > and send that? Your right, sorry about that. This should have the suspend/resume cycle: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.6.0-rc7 (cyber@cyber-linux) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sun Sep 30 09:51:00 EDT 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc7 root=UUID=4b13fd9f-6602-4289-b822-c0b28ed6f65b ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable [ 0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/17F9, BIOS F.19 05/21/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 09D000000 mask FFF000000 uncachable [ 0.000000] 3 base 09E000000 mask FFE000000 uncachable [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 240000000 mask FF0000000 write-back [ 0.000000] 8 base 250000000 mask FF0000000 write-back [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x9cffffff] [ 0.000000] [mem 0x00000000-0x9cffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fb14000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x25fdfffff] [ 0.000000] [mem 0x100000000-0x25fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x25fdfffff @ [mem 0x9ce34000-0x9ce3efff] [ 0.000000] RAMDISK: [mem 0x37ae8000-0x37d6bfff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfeb000 0DAE4 (v01 HP INSYDE 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfea000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe9000 0051F (v01 HP INSYDE 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe7000 00028 (v01 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe4000 00034 (v07 HP INSYDE 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe3000 0094E (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe2000 00996 (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe1000 002DA (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe0000 0035D (v01 HP INSYDE 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfda000 024A1 (v01 HP INSYDE 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25fdfffff] [ 0.000000] NODE_DATA [mem 0x25fdfc000-0x25fdfffff] [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x25fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x9ce3efff] [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff] [ 0.000000] node 0: [mem 0x100000000-0x25fdfffff] [ 0.000000] On node 0 totalpages: 2083789 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3911 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31 [ 0.000000] Normal zone: 22520 pages used for memmap [ 0.000000] Normal zone: 1418760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000 [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000 [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044879 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc7 root=UUID=4b13fd9f-6602-4289-b822-c0b28ed6f65b ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8118728k/9959424k available (6493k kernel code, 1624268k absent, 216428k reserved, 6677k data, 920k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2195.156 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.31 BogoMIPS (lpj=8780624) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000024] Security Framework initialized [ 0.000035] AppArmor: AppArmor initialized [ 0.000591] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002340] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003076] Mount-cache hash table entries: 256 [ 0.003246] Initializing cgroup subsys cpuacct [ 0.003248] Initializing cgroup subsys devices [ 0.003249] Initializing cgroup subsys freezer [ 0.003251] Initializing cgroup subsys blkio [ 0.003252] Initializing cgroup subsys perf_event [ 0.003275] CPU: Physical Processor ID: 0 [ 0.003276] CPU: Processor Core ID: 0 [ 0.003280] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003280] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003282] mce: CPU supports 9 MCE banks [ 0.003294] CPU0: Thermal monitoring handled by SMI [ 0.003300] process: using mwait in idle threads [ 0.003303] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003303] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003303] tlb_flushall_shift is 0x5 [ 0.005958] ACPI: Core revision 20120711 [ 0.026171] ftrace: allocating 24288 entries in 95 pages [ 0.039543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079188] smpboot: CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07 [ 0.184161] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.184167] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.184168] ... version: 3 [ 0.184170] ... bit width: 48 [ 0.184170] ... generic registers: 4 [ 0.184172] ... value mask: 0000ffffffffffff [ 0.184173] ... max period: 000000007fffffff [ 0.184174] ... fixed-purpose events: 3 [ 0.184175] ... event mask: 000000070000000f [ 0.184346] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.195574] CPU1: Thermal monitoring handled by SMI [ 0.208812] CPU2: Thermal monitoring handled by SMI [ 0.222032] CPU3: Thermal monitoring handled by SMI [ 0.235261] CPU4: Thermal monitoring handled by SMI [ 0.248486] CPU5: Thermal monitoring handled by SMI [ 0.261706] CPU6: Thermal monitoring handled by SMI [ 0.184447] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK [ 0.274925] CPU7: Thermal monitoring handled by SMI [ 0.277066] Brought up 8 CPUs [ 0.277069] smpboot: Total of 8 processors activated (35122.49 BogoMIPS) [ 0.284902] devtmpfs: initialized [ 0.286025] EVM: security.selinux [ 0.286027] EVM: security.SMACK64 [ 0.286028] EVM: security.capability [ 0.286068] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.286787] dummy: [ 0.286818] RTC time: 12:17:39, date: 10/01/12 [ 0.286856] NET: Registered protocol family 16 [ 0.286993] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.286995] ACPI: bus type pci registered [ 0.287048] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.287050] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.309263] PCI: Using configuration type 1 for base access [ 0.310151] bio: create slab <bio-0> at 0 [ 0.310218] ACPI: Added _OSI(Module Device) [ 0.310220] ACPI: Added _OSI(Processor Device) [ 0.310221] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.310223] ACPI: Added _OSI(Processor Aggregator Device) [ 0.311978] ACPI: EC: Look up EC in DSDT [ 0.313671] ACPI: Executed 1 blocks of module-level executable AML code [ 0.317418] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.317900] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.318351] ACPI: Dynamic OEM Table Load: [ 0.318354] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.318648] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.319128] ACPI: Dynamic OEM Table Load: [ 0.319131] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.319265] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.319709] ACPI: Dynamic OEM Table Load: [ 0.319711] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.326001] ACPI: Interpreter enabled [ 0.326004] ACPI: (supports S0 S3 S4 S5) [ 0.326025] ACPI: Using IOAPIC for interrupt routing [ 0.334744] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.335103] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.335106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.335388] \_SB_.PCI0:_OSC invalid UUID [ 0.335389] _OSC request data:1 8 1f [ 0.335393] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.335873] PCI host bridge to bus 0000:00 [ 0.335876] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff] [ 0.335878] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.335880] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.335882] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.335884] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.335886] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff] [ 0.335895] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.335932] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.335966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.335991] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.336002] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.336008] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.336013] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f] [ 0.336070] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.336094] pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit] [ 0.336174] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.336210] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.336596] pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff] [ 0.338791] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.338820] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.338836] pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit] [ 0.338909] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.338933] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.339017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.339044] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.339127] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.339156] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.339240] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.339267] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.339350] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.339389] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.339754] pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff] [ 0.341947] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.341976] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.342107] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.342128] pci 0000:00:1f.2: reg 10: [io 0x6098-0x609f] [ 0.342137] pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf] [ 0.342145] pci 0000:00:1f.2: reg 18: [io 0x6090-0x6097] [ 0.342154] pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb] [ 0.342163] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f] [ 0.342171] pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff] [ 0.342219] pci 0000:00:1f.2: PME# supported from D3hot [ 0.342240] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.342257] pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit] [ 0.342279] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f] [ 0.342332] pci_bus 0000:01: busn_res: [bus 01-06] is inserted under [bus 00-fe] [ 0.342345] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000 [ 0.342362] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.342375] pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit] [ 0.342384] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff] [ 0.342401] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.342441] pci 0000:01:00.0: supports D1 D2 [ 0.347998] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.348006] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.348013] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] [ 0.348023] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.348103] pci_bus 0000:07: busn_res: [bus 07-0c] is inserted under [bus 00-fe] [ 0.348129] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.348150] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff] [ 0.348185] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.348208] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.348303] pci 0000:07:00.0: supports D1 D2 [ 0.348304] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.355996] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 0.356006] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.356016] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 0.356030] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.356100] pci_bus 0000:0d: busn_res: [bus 0d-12] is inserted under [bus 00-fe] [ 0.356268] pci 0000:0d:00.0: [8086:0084] type 00 class 0x028000 [ 0.356439] pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4501fff 64bit] [ 0.357172] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 0.364106] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] [ 0.364111] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.364115] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 0.364122] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.364168] pci_bus 0000:13: busn_res: [bus 13-18] is inserted under [bus 00-fe] [ 0.364196] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.364219] pci 0000:13:00.0: reg 10: [mem 0xc3501000-0xc3501fff] [ 0.364306] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref] [ 0.364379] pci 0000:13:00.0: supports D1 D2 [ 0.364380] pci 0000:13:00.0: PME# supported from D1 D2 D3hot [ 0.364434] pci 0000:13:00.1: [10ec:5209] type 00 class 0x080500 [ 0.364457] pci 0000:13:00.1: reg 10: [mem 0xc3500000-0xc35000ff] [ 0.364617] pci 0000:13:00.1: supports D1 D2 [ 0.364619] pci 0000:13:00.1: PME# supported from D1 D2 D3hot [ 0.371987] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 0.371996] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.372006] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.372020] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.372085] pci_bus 0000:19: busn_res: [bus 19] is inserted under [bus 00-fe] [ 0.372189] pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.372245] pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit] [ 0.372543] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold [ 0.380024] pci 0000:00:1c.3: PCI bridge to [bus 19] [ 0.380044] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.380074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.380194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.380225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.380253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.380280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.380319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.380389] \_SB_.PCI0:_OSC invalid UUID [ 0.380390] _OSC request data:1 1f 1f [ 0.380394] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.380395] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.383598] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.383643] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15) [ 0.383685] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15) [ 0.383729] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.383771] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.383815] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15) [ 0.383859] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.383901] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.383979] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.383986] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.383988] vgaarb: loaded [ 0.383989] vgaarb: bridge control possible 0000:01:00.0 [ 0.383991] vgaarb: no bridge control possible 0000:00:02.0 [ 0.384089] SCSI subsystem initialized [ 0.384090] ACPI: bus type scsi registered [ 0.384119] libata version 3.00 loaded. [ 0.384135] ACPI: bus type usb registered [ 0.384151] usbcore: registered new interface driver usbfs [ 0.384158] usbcore: registered new interface driver hub [ 0.384173] usbcore: registered new device driver usb [ 0.384234] PCI: Using ACPI for IRQ routing [ 0.392663] PCI: pci_cache_line_size set to 64 bytes [ 0.392850] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.392852] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff] [ 0.392854] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.392856] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff] [ 0.392930] NetLabel: Initializing [ 0.392931] NetLabel: domain hash size = 128 [ 0.392932] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.392941] NetLabel: unlabeled traffic allowed by default [ 0.392987] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.392993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.396007] Switching to clocksource hpet [ 0.401456] AppArmor: AppArmor Filesystem Enabled [ 0.401474] pnp: PnP ACPI init [ 0.401487] ACPI: bus type pnp registered [ 0.401762] pnp 00:00: [bus 00-fe] [ 0.401764] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.401766] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.401768] pnp 00:00: [io 0x0d00-0xffff window] [ 0.401770] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.401772] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.401774] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.401776] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.401777] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.401779] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.401781] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.401783] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.401784] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.401786] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.401788] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.401790] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.401791] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.401793] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.401795] pnp 00:00: [mem 0x9fa00000-0xfeafffff window] [ 0.401848] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.401866] pnp 00:01: [io 0x0000-0x001f] [ 0.401869] pnp 00:01: [io 0x0081-0x0091] [ 0.401871] pnp 00:01: [io 0x0093-0x009f] [ 0.401872] pnp 00:01: [io 0x00c0-0x00df] [ 0.401874] pnp 00:01: [dma 4] [ 0.401893] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.401902] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.401919] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.401990] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.402009] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.402018] pnp 00:04: [io 0x00f0] [ 0.402027] pnp 00:04: [irq 13] [ 0.402043] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.402053] pnp 00:05: [io 0x002e-0x002f] [ 0.402054] pnp 00:05: [io 0x004e-0x004f] [ 0.402056] pnp 00:05: [io 0x0061] [ 0.402057] pnp 00:05: [io 0x0063] [ 0.402059] pnp 00:05: [io 0x0065] [ 0.402061] pnp 00:05: [io 0x0067] [ 0.402062] pnp 00:05: [io 0x0070] [ 0.402064] pnp 00:05: [io 0x0080] [ 0.402065] pnp 00:05: [io 0x0092] [ 0.402067] pnp 00:05: [io 0x00b2-0x00b3] [ 0.402068] pnp 00:05: [io 0x0680-0x069f] [ 0.402070] pnp 00:05: [io 0x1000-0x100f] [ 0.402071] pnp 00:05: [io 0x1010-0x1013] [ 0.402073] pnp 00:05: [io 0xffff] [ 0.402075] pnp 00:05: [io 0x0400-0x0453] [ 0.402076] pnp 00:05: [io 0x0458-0x047f] [ 0.402078] pnp 00:05: [io 0x0500-0x057f] [ 0.402079] pnp 00:05: [io 0x164e-0x164f] [ 0.402121] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.402123] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.402125] system 00:05: [io 0x1010-0x1013] has been reserved [ 0.402127] system 00:05: [io 0xffff] has been reserved [ 0.402129] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.402131] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.402133] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.402135] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.402138] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.402145] pnp 00:06: [io 0x0070-0x0077] [ 0.402150] pnp 00:06: [irq 8] [ 0.402167] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.402184] pnp 00:07: [io 0x0454-0x0457] [ 0.402212] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.402215] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.402241] pnp 00:08: [io 0x0060] [ 0.402243] pnp 00:08: [io 0x0064] [ 0.402248] pnp 00:08: [irq 1] [ 0.402268] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.402295] pnp 00:09: [irq 12] [ 0.402314] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active) [ 0.402403] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 0.402405] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 0.402406] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 0.402408] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 0.402409] pnp 00:0a: [mem 0xe0000000-0xefffffff] [ 0.402411] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 0.402413] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 0.402414] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 0.402416] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 0.402418] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff] [ 0.402454] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.402456] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.402458] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.402460] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.402462] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.402464] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.402466] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.402468] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 0.402470] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.402472] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.402474] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.403657] pnp 00:0b: [irq 23] [ 0.403694] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active) [ 0.403712] pnp 00:0c: [mem 0x20000000-0x201fffff] [ 0.403714] pnp 00:0c: [mem 0x40000000-0x401fffff] [ 0.403761] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved [ 0.403764] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved [ 0.403766] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.403782] pnp: PnP ACPI: found 13 devices [ 0.403783] ACPI: ACPI bus type pnp unregistered [ 0.409898] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.409902] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.409945] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref] [ 0.409947] pci 0000:00:01.0: PCI bridge to [bus 01-06] [ 0.409950] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.409953] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff] [ 0.409956] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.409959] pci 0000:00:1c.0: PCI bridge to [bus 07-0c] [ 0.409963] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.409968] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff] [ 0.409973] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.409980] pci 0000:00:1c.1: PCI bridge to [bus 0d-12] [ 0.409983] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.409989] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff] [ 0.409993] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.410001] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref] [ 0.410002] pci 0000:00:1c.2: PCI bridge to [bus 13-18] [ 0.410006] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.410011] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff] [ 0.410015] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.410022] pci 0000:00:1c.3: PCI bridge to [bus 19] [ 0.410027] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff] [ 0.410071] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.410073] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.410075] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.410077] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.410079] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.410080] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff] [ 0.410082] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.410084] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff] [ 0.410086] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff] [ 0.410088] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] [ 0.410090] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.410092] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff] [ 0.410093] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] [ 0.410095] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff] [ 0.410097] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff] [ 0.410099] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref] [ 0.410101] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff] [ 0.410127] NET: Registered protocol family 2 [ 0.410705] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.411950] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.412098] TCP: Hash tables configured (established 524288 bind 65536) [ 0.412114] TCP: reno registered [ 0.412126] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.412159] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.412242] NET: Registered protocol family 1 [ 0.412256] pci 0000:00:02.0: Boot video device [ 0.456323] PCI: CLS 64 bytes, default 64 [ 0.456363] Trying to unpack rootfs image as initramfs... [ 0.503578] Freeing initrd memory: 2576k freed [ 0.503845] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.503848] software IO TLB [mem 0x98e34000-0x9ce33fff] (64MB) mapped at [ffff880098e34000-ffff88009ce33fff] [ 0.503895] Simple Boot Flag at 0x44 set to 0x1 [ 0.504313] audit: initializing netlink socket (disabled) [ 0.504323] type=2000 audit(1349093859.384:1): initialized [ 0.525145] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.526735] VFS: Disk quotas dquot_6.5.2 [ 0.526772] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.527125] fuse init (API version 7.20) [ 0.527191] msgmni has been set to 15861 [ 0.527453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.527476] io scheduler noop registered [ 0.527477] io scheduler deadline registered [ 0.527501] io scheduler cfq registered (default) [ 0.527591] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.527813] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.527830] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.527880] intel_idle: MWAIT substates: 0x21120 [ 0.527882] intel_idle: v0.4 model 0x2A [ 0.527883] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.528906] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.529824] ACPI: AC Adapter [AC] (on-line) [ 0.529892] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0 [ 0.531464] ACPI: Lid Switch [LID] [ 0.531513] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.531516] ACPI: Power Button [PWRB] [ 0.531544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.531546] ACPI: Power Button [PWRF] [ 0.531609] ACPI: Requesting acpi_cpufreq [ 0.548478] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.548483] ACPI: Thermal Zone [THRM] (59 C) [ 0.548515] GHES: HEST is not enabled! [ 0.548572] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.554996] Linux agpgart interface v0.103 [ 0.556141] brd: module loaded [ 0.556703] loop: module loaded [ 0.556787] ahci 0000:00:1f.2: version 3.0 [ 0.556847] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.556916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode [ 0.556919] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.556924] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.564235] scsi0 : ahci [ 0.564299] scsi1 : ahci [ 0.564351] scsi2 : ahci [ 0.564406] scsi3 : ahci [ 0.564456] scsi4 : ahci [ 0.564510] scsi5 : ahci [ 0.564541] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41 [ 0.564542] ata2: DUMMY [ 0.564543] ata3: DUMMY [ 0.564544] ata4: DUMMY [ 0.564545] ata5: DUMMY [ 0.564548] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41 [ 0.564815] libphy: Fixed MDIO Bus: probed [ 0.564827] tun: Universal TUN/TAP device driver, 1.6 [ 0.564828] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.564863] PPP generic driver version 2.4.2 [ 0.564931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.564955] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.564959] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.564997] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.568883] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.568891] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 0.568905] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000 [ 0.579833] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.579993] hub 1-0:1.0: USB hub found [ 0.579997] hub 1-0:1.0: 2 ports detected [ 0.580061] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.580065] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.580104] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.584004] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.584013] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 0.584026] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000 [ 0.586516] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.586521] ACPI: Battery Slot [BAT0] (battery present) [ 0.595810] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.595950] hub 2-0:1.0: USB hub found [ 0.595953] hub 2-0:1.0: 2 ports detected [ 0.595998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.596006] uhci_hcd: USB Universal Host Controller Interface driver [ 0.596046] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 0.596081] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3 [ 0.596281] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000 [ 0.596377] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X [ 0.596383] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X [ 0.596389] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X [ 0.596394] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X [ 0.596399] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X [ 0.596404] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X [ 0.596409] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X [ 0.596415] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X [ 0.596615] xHCI xhci_add_endpoint called for root hub [ 0.596617] xHCI xhci_check_bandwidth called for root hub [ 0.596634] hub 3-0:1.0: USB hub found [ 0.596642] hub 3-0:1.0: 2 ports detected [ 0.596692] xhci_hcd 0000:19:00.0: xHCI Host Controller [ 0.596720] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4 [ 0.599725] xHCI xhci_add_endpoint called for root hub [ 0.599726] xHCI xhci_check_bandwidth called for root hub [ 0.599743] hub 4-0:1.0: USB hub found [ 0.599751] hub 4-0:1.0: 2 ports detected [ 0.599869] usbcore: registered new interface driver libusual [ 0.599898] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.607659] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.607663] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.607754] mousedev: PS/2 mouse device common for all mice [ 0.607933] rtc_cmos 00:06: RTC can wake from S4 [ 0.608048] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.608075] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.608130] device-mapper: uevent: version 1.0.3 [ 0.608181] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 0.608317] cpuidle: using governor ladder [ 0.608493] cpuidle: using governor menu [ 0.608494] EFI Variables Facility v0.08 2004-May-17 [ 0.608549] TCP: cubic registered [ 0.608623] NET: Registered protocol family 10 [ 0.608758] NET: Registered protocol family 17 [ 0.608771] Key type dns_resolver registered [ 0.609023] PM: Hibernation image not present or could not be loaded. [ 0.609033] registered taskstats version 1 [ 0.610888] Key type trusted registered [ 0.611881] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.612867] Key type encrypted registered [ 0.615584] Magic number: 0:91:278 [ 0.615606] tty tty15: hash matches [ 0.615698] rtc_cmos 00:06: setting system clock to 2012-10-01 12:17:39 UTC (1349093859) [ 0.617088] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.617090] EDD information not available. [ 0.883575] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.883617] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.885595] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100 [ 0.885604] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.885985] ata6.00: ATAPI: hp BD E DS6E2LH, FH62, max UDMA/100 [ 0.887556] ata6.00: configured for UDMA/100 [ 0.887676] ata1.00: configured for UDMA/100 [ 0.887887] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 JE4O PQ: 0 ANSI: 5 [ 0.888084] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.888103] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 0.888106] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.888253] sd 0:0:0:0: [sda] Write Protect is off [ 0.888257] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.888351] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.890872] scsi 5:0:0:0: CD-ROM hp BD E DS6E2LH FH62 PQ: 0 ANSI: 5 [ 0.891540] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 0.894522] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.894528] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.894730] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 0.894841] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 0.961096] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 0.962330] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.963535] Freeing unused kernel memory: 920k freed [ 0.963622] Write protecting the kernel read-only data: 12288k [ 0.967817] Freeing unused kernel memory: 1688k freed [ 0.971047] Freeing unused kernel memory: 1320k freed [ 0.983850] udevd[138]: starting version 175 [ 1.003067] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.003318] r8169 0000:07:00.0: irq 50 for MSI/MSI-X [ 1.003447] sdhci: Secure Digital Host Controller Interface driver [ 1.003449] sdhci: Copyright(c) Pierre Ossman [ 1.003530] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c78000, 08:2e:5f:82:40:38, XID 0c900800 IRQ 50 [ 1.003533] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.004120] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1) [ 1.004157] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.004164] mmc0: no vmmc regulator found [ 1.004181] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.004213] Registered led device: mmc0:: [ 1.024263] hub 1-1:1.0: USB hub found [ 1.024351] hub 1-1:1.0: 6 ports detected [ 1.035381] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA [ 1.038912] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.074970] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.110827] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.135235] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.146382] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.267736] hub 2-1:1.0: USB hub found [ 1.267824] hub 2-1:1.0: 6 ports detected [ 1.339167] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd [ 1.502850] tsc: Refined TSC clocksource calibration: 2195.012 MHz [ 1.502863] Switching to clocksource tsc [ 1.502984] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd [ 1.677248] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.302766] udevd[456]: starting version 175 [ 9.303326] Adding 12582908k swap on /dev/sda6. Priority:-1 extents:1 across:12582908k [ 9.409038] type=1400 audit(1349108268.300:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=552 comm="apparmor_parser" [ 9.409046] type=1400 audit(1349108268.300:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=620 comm="apparmor_parser" [ 9.409313] type=1400 audit(1349108268.300:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=552 comm="apparmor_parser" [ 9.409321] type=1400 audit(1349108268.300:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser" [ 9.409470] type=1400 audit(1349108268.300:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=552 comm="apparmor_parser" [ 9.409479] type=1400 audit(1349108268.300:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser" [ 9.527975] wmi: Mapper loaded [ 9.765192] lp: driver loaded but no devices found [ 9.969357] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned. [ 9.969987] Initializing Realtek PCIE storage driver... [ 9.970063] Resource length: 0x1000 [ 9.970076] Original address: 0xc3501000, remapped address: 0xffffc900118a6000 [ 9.970079] pci->irq = 18 [ 9.970080] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18 [ 10.042191] mei 0000:00:16.0: setting latency timer to 64 [ 10.042250] mei 0000:00:16.0: irq 51 for MSI/MSI-X [ 10.053660] mei 0000:00:16.0: wd: failed to find the client [ 10.173511] scsi6 : SCSI emulation for PCI-Express Mass Storage devices [ 10.173680] rts_pstor: waiting for device to settle before scanning [ 10.179530] hp_accel: laptop model unknown, using default axes configuration [ 10.198871] input: HP WMI hotkeys as /devices/virtual/input/input4 [ 10.320527] lis3lv02d: 8 bits 3DC sensor found [ 10.810643] cfg80211: Calling CRDA to update world regulatory domain [ 10.813910] cfg80211: World regulatory domain updated: [ 10.813912] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.813914] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.813915] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.813916] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.813917] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.813918] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.061084] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 11.061086] Copyright(c) 2003-2012 Intel Corporation [ 11.061226] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000 [ 11.061227] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc900118b4000 [ 11.061229] iwlwifi 0000:0d:00.0: HW Revision ID = 0x0 [ 11.061557] iwlwifi 0000:0d:00.0: irq 52 for MSI/MSI-X [ 11.080252] iwlwifi 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138 [ 11.172197] rts_pstor: device scan complete [ 11.172333] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS [ 11.172525] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 0.894934] ACPI: Invalid Power Resource to register! [ 11.172541] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 11.212660] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294 [ 11.256376] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 11.300199] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 [ 11.300355] Registered led device: hp::hddprotect [ 11.300370] hp_accel: driver loaded [ 11.328742] [drm] Initialized drm 1.1.0 20060810 [ 12.287191] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 12.554929] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 12.554932] iwldvm: Copyright(c) 2003-2012 Intel Corporation [ 12.554946] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 12.554948] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 12.554949] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 12.554950] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 12.554951] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P enabled [ 12.554953] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 12.555110] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S [ 12.576304] iwlwifi 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 12.576306] iwlwifi 0000:0d:00.0: Device SKU: 0x50 [ 12.576307] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 12.576381] Registered led device: phy0-led [ 12.576398] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 12.604491] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 12.669576] [drm] radeon defaulting to kernel modesetting. [ 12.669578] [drm] radeon kernel modesetting enabled. [ 12.669590] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 12.669630] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 12.669851] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1656). [ 12.669883] [drm] register mmio base: 0xC6500000 [ 12.669884] [drm] register mmio size: 131072 [ 12.740179] ATOM BIOS: HP/Flex [ 12.740538] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 12.740540] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 12.740545] mtrr: no more MTRRs available [ 12.740546] [drm] Detected VRAM RAM=1024M, BAR=256M [ 12.740547] [drm] RAM width 64bits DDR [ 12.740583] [TTM] Zone kernel: Available graphics memory: 4062616 kiB [ 12.740584] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 12.740585] [TTM] Initializing pool allocator [ 12.740588] [TTM] Initializing DMA pool allocator [ 12.740603] [drm] radeon: 1024M of VRAM memory ready [ 12.740604] [drm] radeon: 512M of GTT memory ready. [ 12.740615] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 12.740616] [drm] Driver supports precise vblank timestamp query. [ 12.740657] radeon 0000:01:00.0: irq 54 for MSI/MSI-X [ 12.740665] radeon 0000:01:00.0: radeon: using MSI. [ 12.740700] [drm] radeon: irq initialized. [ 12.740702] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 12.740975] [drm] probing gen 2 caps for device 8086:101 = 2/0 [ 12.740976] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 12.741033] [drm] Loading CAICOS Microcode [ 12.746928] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 12.747044] radeon 0000:01:00.0: WB enabled [ 12.747046] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88025509fc00 [ 12.763422] [drm] ring test on 0 succeeded in 3 usecs [ 12.763646] [drm] ib test on ring 0 succeeded in 0 usecs [ 12.763794] [drm] Radeon Display Connectors [ 12.770660] [drm] Internal thermal controller with fan control [ 12.771658] [drm] radeon: power management initialized [ 12.771719] No connectors reported connected with modes [ 12.771721] [drm] Cannot find any crtc or sizes - going 1024x768 [ 12.773067] [drm] fb mappable at 0xA0142000 [ 12.773068] [drm] vram apper at 0xA0000000 [ 12.773069] [drm] size 3145728 [ 12.773070] [drm] fb depth is 24 [ 12.773070] [drm] pitch is 4096 [ 12.773245] Console: switching to colour frame buffer device 128x48 [ 12.774608] fb0: radeondrmfb frame buffer device [ 12.774609] drm: registered panic notifier [ 12.774619] [drm] Initialized radeon 2.22.0 20080528 for 0000:01:00.0 on minor 0 [ 12.918989] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 12.919064] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.919127] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.919576] pci 0000:00:00.0: Intel Sandybridge Chipset [ 12.919645] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 12.920580] pci 0000:00:00.0: detected 32768K stolen memory [ 12.920630] i915 0000:00:02.0: setting latency timer to 64 [ 12.942287] i915 0000:00:02.0: irq 55 for MSI/MSI-X [ 12.942294] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 12.942295] [drm] Driver supports precise vblank timestamp query. [ 12.943014] vga_switcheroo: enabled [ 12.943055] radeon atpx: version is 1 [ 12.943079] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 12.943081] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.121715] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 13.389676] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 13.421182] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 13.556711] fbcon: inteldrmfb (fb1) is primary device [ 13.556713] fbcon: Remapping primary device, fb1, to tty 1-63 [ 13.809643] fb1: inteldrmfb frame buffer device [ 13.809855] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 13.810378] init: failsafe main process (885) killed by TERM signal [ 13.836196] acpi device:2f: registered as cooling_device8 [ 13.836530] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 13.836583] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input10 [ 13.847553] acpi device:3c: registered as cooling_device9 [ 13.847732] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.847891] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 [ 13.848197] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 [ 13.854406] type=1400 audit(1349108272.748:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=964 comm="apparmor_parser" [ 13.854524] type=1400 audit(1349108272.748:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=971 comm="apparmor_parser" [ 13.854644] type=1400 audit(1349108272.748:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=968 comm="apparmor_parser" [ 13.855039] type=1400 audit(1349108272.748:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=968 comm="apparmor_parser" [ 14.003161] r8169 0000:07:00.0: eth0: link down [ 14.003196] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.004763] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S [ 14.012157] iwlwifi 0000:0d:00.0: Radio type=0x0-0x0-0x3 [ 14.023833] ppdev: user-space parallel port driver [ 14.067720] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S [ 14.075130] iwlwifi 0000:0d:00.0: Radio type=0x0-0x0-0x3 [ 14.130122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 14.382066] Bluetooth: Core ver 2.16 [ 14.382079] NET: Registered protocol family 31 [ 14.382081] Bluetooth: HCI device and connection manager initialized [ 14.382082] Bluetooth: HCI socket layer initialized [ 14.382083] Bluetooth: L2CAP socket layer initialized [ 14.382085] Bluetooth: SCO socket layer initialized [ 14.465983] Bluetooth: RFCOMM TTY layer initialized [ 14.465987] Bluetooth: RFCOMM socket layer initialized [ 14.465988] Bluetooth: RFCOMM ver 1.11 [ 14.480123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.480125] Bluetooth: BNEP filters: protocol multicast [ 14.581624] init: plymouth-stop pre-start process (1265) terminated with status 1 [ 16.246691] wlan0: authenticate with 30:46:9a:68:a9:52 [ 16.259674] wlan0: send auth to 30:46:9a:68:a9:52 (try 1/3) [ 16.261545] wlan0: authenticated [ 16.262602] wlan0: associate with 30:46:9a:68:a9:52 (try 1/3) [ 16.266379] wlan0: RX AssocResp from 30:46:9a:68:a9:52 (capab=0x411 status=0 aid=3) [ 16.272093] wlan0: associated [ 16.272115] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 21.073554] hp_wmi: Unknown event_id - 10 - 0x0 [ 48.955887] wlan0: deauthenticating from 30:46:9a:68:a9:52 by local choice (reason=3) [ 48.974402] cfg80211: All devices are disconnected, going to restore regulatory settings [ 48.974406] cfg80211: Restoring regulatory settings [ 48.974425] cfg80211: Calling CRDA to update world regulatory domain [ 48.976905] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 48.976907] cfg80211: World regulatory domain updated: [ 48.976908] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 48.976910] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 48.976911] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 48.976913] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 48.976914] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 48.976915] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 50.845400] PM: Syncing filesystems ... done. [ 50.845986] PM: Preparing system for mem sleep [ 51.326775] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 51.342695] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 51.358669] PM: Entering mem sleep [ 51.358745] Suspending console(s) (use no_console_suspend to debug) [ 51.359029] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 51.359188] sd 0:0:0:0: [sda] Stopping disk [ 51.408578] Ready to suspend [ 52.422252] PM: suspend of devices complete after 1064.047 msecs [ 52.422253] PM: suspend devices took 1.064 seconds [ 52.422320] PM: late suspend of devices complete after 0.066 msecs [ 52.422539] xhci_hcd 0000:19:00.0: wake-up capability enabled by ACPI [ 52.473992] r8169 0000:07:00.0: wake-up capability enabled by ACPI [ 52.490130] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 52.506050] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 52.538035] PM: noirq suspend of devices complete after 115.779 msecs [ 52.538964] ACPI: Preparing to enter system sleep state S3 [ 52.550233] PM: Saving platform NVS memory [ 52.553080] Disabling non-boot CPUs ... [ 52.553480] Broke affinity for irq 52 [ 52.554773] smpboot: CPU 1 is now offline [ 52.657863] smpboot: CPU 2 is now offline [ 52.658350] Broke affinity for irq 20 [ 52.761800] smpboot: CPU 3 is now offline [ 52.865733] smpboot: CPU 4 is now offline [ 52.866187] Broke affinity for irq 16 [ 52.969672] smpboot: CPU 5 is now offline [ 53.073616] smpboot: CPU 6 is now offline [ 53.074059] Broke affinity for irq 1 [ 53.177547] smpboot: CPU 7 is now offline [ 53.177920] Extended CMOS year: 2000 [ 53.179017] ACPI: Low-level resume complete [ 53.179058] PM: Restoring platform NVS memory [ 53.179500] Extended CMOS year: 2000 [ 53.179532] CPU0: Thermal monitoring handled by SMI [ 53.179556] Enabling non-boot CPUs ... [ 53.179618] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 53.190651] CPU1: Thermal monitoring handled by SMI [ 53.193148] CPU1 is up [ 53.193196] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 53.204238] CPU2: Thermal monitoring handled by SMI [ 53.206713] CPU2 is up [ 53.206754] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 53.217695] CPU3: Thermal monitoring handled by SMI [ 53.220177] CPU3 is up [ 53.220219] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 53.231261] CPU4: Thermal monitoring handled by SMI [ 53.233773] CPU4 is up [ 53.233816] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 53.244856] CPU5: Thermal monitoring handled by SMI [ 53.247359] CPU5 is up [ 53.247399] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 53.258440] CPU6: Thermal monitoring handled by SMI [ 53.260956] CPU6 is up [ 53.260994] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 53.272034] CPU7: Thermal monitoring handled by SMI [ 53.274556] CPU7 is up [ 53.282163] ACPI: Waking up from system sleep state S3 [ 53.383122] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 53.415098] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 53.527130] xhci_hcd 0000:19:00.0: wake-up capability disabled by ACPI [ 53.527192] PM: noirq resume of devices complete after 192.188 msecs [ 53.527286] PM: early resume of devices complete after 0.047 msecs [ 53.527322] i915 0000:00:02.0: setting latency timer to 64 [ 53.527328] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 53.527360] ahci 0000:00:1f.2: setting latency timer to 64 [ 53.527362] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 53.527401] Ready to resume [ 53.527434] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 53.527437] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18 [ 53.527464] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 53.527548] mei 0000:00:16.0: irq 51 for MSI/MSI-X [ 53.527573] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X [ 53.528546] mei 0000:00:16.0: wd: failed to find the client [ 53.528996] r8169 0000:07:00.0: wake-up capability disabled by ACPI [ 53.530722] [drm] probing gen 2 caps for device 8086:101 = 2/0 [ 53.530722] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 53.543109] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 53.543215] radeon 0000:01:00.0: WB enabled [ 53.543217] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88025509fc00 [ 53.559420] [drm] ring test on 0 succeeded in 3 usecs [ 53.559496] [drm] ib test on ring 0 succeeded in 0 usecs [ 53.566969] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 53.782921] usb 1-1.1: reset full-speed USB device number 3 using ehci_hcd [ 53.854805] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 53.857129] ata6.00: configured for UDMA/100 [ 53.946887] usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd [ 53.983343] hp_wmi: Unknown event_id - 10 - 0x1 [ 55.693681] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 55.697166] ata1.00: configured for UDMA/100 [ 55.709834] sd 0:0:0:0: [sda] Starting disk [ 55.711995] Extended CMOS year: 2000 [ 55.736015] PM: resume of devices complete after 2210.050 msecs [ 55.736086] PM: resume devices took 2.208 seconds [ 55.736116] PM: Finishing wakeup. [ 55.736117] Restarting tasks ... done. [ 55.747762] video LNXVIDEO:00: Restoring backlight state [ 55.751264] video LNXVIDEO:01: Restoring backlight state [ 55.781222] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 55.816755] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 55.852660] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 55.888718] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 56.443323] r8169 0000:07:00.0: eth0: link down [ 56.443912] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 56.444654] iwlwifi 0000:0d:00.0: L1 Enabled; Disabling L0S [ 56.452444] iwlwifi 0000:0d:00.0: Radio type=0x0-0x0-0x3 [ 56.508734] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 58.186398] hp_wmi: Unknown event_id - 10 - 0x1 [ 58.835223] wlan0: authenticate with 30:46:9a:68:a9:52 [ 58.864519] wlan0: send auth to 30:46:9a:68:a9:52 (try 1/3) [ 59.067596] wlan0: send auth to 30:46:9a:68:a9:52 (try 2/3) [ 59.271484] wlan0: send auth to 30:46:9a:68:a9:52 (try 3/3) [ 59.475356] wlan0: authentication with 30:46:9a:68:a9:52 timed out [ 70.837852] wlan0: authenticate with 30:46:9a:68:a9:52 [ 70.847884] wlan0: direct probe to 30:46:9a:68:a9:52 (try 1/3) [ 71.048446] wlan0: direct probe to 30:46:9a:68:a9:52 (try 2/3) [ 71.252299] wlan0: direct probe to 30:46:9a:68:a9:52 (try 3/3) [ 71.456212] wlan0: authentication with 30:46:9a:68:a9:52 timed out [ 77.137717] wlan0: authenticate with 30:46:9a:68:a9:52 [ 77.147754] wlan0: direct probe to 30:46:9a:68:a9:52 (try 1/3) [ 77.348717] wlan0: direct probe to 30:46:9a:68:a9:52 (try 2/3) [ 77.552588] wlan0: direct probe to 30:46:9a:68:a9:52 (try 3/3) [ 77.756437] wlan0: authentication with 30:46:9a:68:a9:52 timed out [ 79.771235] iwlwifi 0000:0d:00.0: fail to flush all tx fifo queues [ 83.437538] wlan0: authenticate with 30:46:9a:68:a9:52 [ 83.447667] wlan0: direct probe to 30:46:9a:68:a9:52 (try 1/3) [ 83.648945] wlan0: direct probe to 30:46:9a:68:a9:52 (try 2/3) [ 83.852827] wlan0: direct probe to 30:46:9a:68:a9:52 (try 3/3) [ 84.056724] wlan0: authentication with 30:46:9a:68:a9:52 timed out [ 86.063462] iwlwifi 0000:0d:00.0: fail to flush all tx fifo queues [ 95.407718] wlan0: authenticate with 30:46:9a:68:a9:52 [ 95.420221] wlan0: direct probe to 30:46:9a:68:a9:52 (try 1/3) [ 95.621777] wlan0: direct probe to 30:46:9a:68:a9:52 (try 2/3) [ 95.825653] wlan0: direct probe to 30:46:9a:68:a9:52 (try 3/3) [ 96.029529] wlan0: authentication with 30:46:9a:68:a9:52 timed out ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: iwlwifi can't connect to router after resuming from suspend. 2012-10-01 16:42 ` Kevin Cruz @ 2012-10-01 19:31 ` Johannes Berg 2012-10-01 23:06 ` How do I get mac80211 debugfs? Kevin Cruz 0 siblings, 1 reply; 8+ messages in thread From: Johannes Berg @ 2012-10-01 19:31 UTC (permalink / raw) To: Kevin Cruz Cc: Dan Carpenter, Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Thanks Dan, Kevin, [...] [suspend/resume] > [ 58.835223] wlan0: authenticate with 30:46:9a:68:a9:52 > [ 58.864519] wlan0: send auth to 30:46:9a:68:a9:52 (try 1/3) > [ 59.067596] wlan0: send auth to 30:46:9a:68:a9:52 (try 2/3) > [ 59.271484] wlan0: send auth to 30:46:9a:68:a9:52 (try 3/3) > [ 59.475356] wlan0: authentication with 30:46:9a:68:a9:52 timed out Yeah ... we saw this in the lab at some point, but somehow we couldn't reproduce it again later. The issue is that we stop the queues, and never restart them, and if it's the same issue then it's definitely the driver's fault. To confirm, when you get this, can you please do sudo cat /sys/kernel/debug/ieee80211/phy*/queues (assuming you have mac80211 debugfs compiled) If it's really the same bug, the first four queues (0-3) will show something like 00: 0x00000001/7 01: 0x00000001/0 02: 0x00000001/0 03: 0x00000001/0 [...] If this is the case, then I'd appreciate if you could do tracing. To do that, make sure CONFIG_IWLWIFI_DEVICE_TRACING is set in your kernel config (which requires CONFIG_EVENT_TRACING, you can use the / key in menuconfig to search for items). When you have that, grab the trace-cmd tool (ubuntu ships it now I believe) and start tracing *before* you suspend: sudo bash -c "echo global > /sys/kernel/debug/tracing/trace_clock" sudo trace-cmd record -e mac80211 -e iwlwifi -e iwlwifi_msg then suspend and resume while it's running, and ctrl-c later after it failed to connect after resuming. Then you get a file "trace.dat", compress it and send it to me privately (it's large, and may contain information you might consider private, like your AP name/BSSID/etc.) Thanks! If that's too much effort, let me know and I'll try to reproduce, but I'll probably need to have more info on your setup etc. as I haven't been able to reproduce this in mine yet, but I also have issues with suspend/resume anyway quite frequently :-( johannes ^ permalink raw reply [flat|nested] 8+ messages in thread
* How do I get mac80211 debugfs? 2012-10-01 19:31 ` Johannes Berg @ 2012-10-01 23:06 ` Kevin Cruz 2012-10-01 23:15 ` Kevin Cruz ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Kevin Cruz @ 2012-10-01 23:06 UTC (permalink / raw) To: Johannes Berg Cc: Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Hey Johannes, None of this should be too much of an effort for me. Thankfully I don't find terminals to be daunting. > Yeah ... we saw this in the lab at some point, but somehow we couldn't > reproduce it again later. The issue is that we stop the queues, and > never restart them, and if it's the same issue then it's definitely the > driver's fault. > To confirm, when you get this, can you please do > sudo cat /sys/kernel/debug/ieee80211/phy*/queues > (assuming you have mac80211 debugfs compiled) So I tried that but all I got back was: cat: /sys/kernel/debug/ieee80211/phy*/queues: No such file or directory so I'm assuming it's because I must not have mac80211 debugfs. So how do I get it? Thanks, Kevin ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How do I get mac80211 debugfs? 2012-10-01 23:06 ` How do I get mac80211 debugfs? Kevin Cruz @ 2012-10-01 23:15 ` Kevin Cruz 2012-10-02 6:38 ` Johannes Berg 2012-10-02 6:48 ` Rami Rosen 2 siblings, 0 replies; 8+ messages in thread From: Kevin Cruz @ 2012-10-01 23:15 UTC (permalink / raw) To: Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Cc: Johannes Berg I accidentally changed the subject name. This should be part of "iwlwifi can't connect to router after suspend resuming from suspend." ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How do I get mac80211 debugfs? 2012-10-01 23:06 ` How do I get mac80211 debugfs? Kevin Cruz 2012-10-01 23:15 ` Kevin Cruz @ 2012-10-02 6:38 ` Johannes Berg 2012-10-02 11:20 ` Johannes Berg 2012-10-02 6:48 ` Rami Rosen 2 siblings, 1 reply; 8+ messages in thread From: Johannes Berg @ 2012-10-02 6:38 UTC (permalink / raw) To: Kevin Cruz Cc: Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Hi Kevin, > So I tried that but all I got back was: > > cat: /sys/kernel/debug/ieee80211/phy*/queues: No such file or directory > > so I'm assuming it's because I must not have mac80211 debugfs. So how > do I get it? First, make sure it's mounted, check "mount" and if not mount it: sudo mount -t debugfs debugfs /sys/kernel/debug If that doesn't work you don't have it enabled in the kernel config, check for CONFIG_DEBUG_FS. If you do have it, but not mac80211's files, check for CONFIG_MAC80211_DEBUGFS. Thanks, johannes ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How do I get mac80211 debugfs? 2012-10-02 6:38 ` Johannes Berg @ 2012-10-02 11:20 ` Johannes Berg 0 siblings, 0 replies; 8+ messages in thread From: Johannes Berg @ 2012-10-02 11:20 UTC (permalink / raw) To: Kevin Cruz Cc: Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org On Tue, 2012-10-02 at 08:38 +0200, Johannes Berg wrote: > Hi Kevin, > > > So I tried that but all I got back was: > > > > cat: /sys/kernel/debug/ieee80211/phy*/queues: No such file or directory > > > > so I'm assuming it's because I must not have mac80211 debugfs. So how > > do I get it? > > First, make sure it's mounted, check "mount" and if not mount it: > > sudo mount -t debugfs debugfs /sys/kernel/debug > > If that doesn't work you don't have it enabled in the kernel config, > check for CONFIG_DEBUG_FS. If you do have it, but not mac80211's files, > check for CONFIG_MAC80211_DEBUGFS. Oh also, if tracing already works, that'd be sufficient. No need to enable debugfs just to confirm the issue, tracing would let me confirm it as well. I just thought debugfs would let me confirm the issue first before going to the trouble of enabling tracing. johannes ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How do I get mac80211 debugfs? 2012-10-01 23:06 ` How do I get mac80211 debugfs? Kevin Cruz 2012-10-01 23:15 ` Kevin Cruz 2012-10-02 6:38 ` Johannes Berg @ 2012-10-02 6:48 ` Rami Rosen 2 siblings, 0 replies; 8+ messages in thread From: Rami Rosen @ 2012-10-02 6:48 UTC (permalink / raw) To: Kevin Cruz Cc: Johannes Berg, Intel Wireless, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org Hi, Could it be that debugfs is not mounted on your filesystem ? In case mount | grep debugfs returns nothing, you can run: mount -t debugfs none_debugs /sys/kernel/debug and try again. Also make sure that CONFIG_MAC80211_DEBUGFS is set location is: -> Networking support (NET [=y]) │ -> Wireless (WIRELESS [=y]) Regards, Rami Rosen On Tue, Oct 2, 2012 at 1:06 AM, Kevin Cruz <skate_ops@yahoo.com> wrote: > Hey Johannes, > None of this should be too much of an effort for me. Thankfully I > don't find terminals to be daunting. > >> Yeah ... we saw this in the lab at some point, but somehow we couldn't >> reproduce it again later. The issue is that we stop the queues, and >> never restart them, and if it's the same issue then it's definitely the >> driver's fault. > >> To confirm, when you get this, can you please do > >> sudo cat /sys/kernel/debug/ieee80211/phy*/queues > >> (assuming you have mac80211 debugfs compiled) > > So I tried that but all I got back was: > > cat: /sys/kernel/debug/ieee80211/phy*/queues: No such file or directory > > so I'm assuming it's because I must not have mac80211 debugfs. So how > do I get it? > > Thanks, Kevin > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-10-02 11:19 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1348086305.81224.YahooMailNeo@web164004.mail.gq1.yahoo.com>
[not found] ` <20120928121917.GF5368@mwanda>
[not found] ` <1348870515.1973.YahooMailNeo@web164005.mail.gq1.yahoo.com>
[not found] ` <20120929072527.GA13767@mwanda>
[not found] ` <1349102641.41622.YahooMailNeo@web164005.mail.gq1.yahoo.com>
2012-10-01 15:09 ` iwlwifi can't connect to router after resuming from suspend Dan Carpenter
2012-10-01 16:42 ` Kevin Cruz
2012-10-01 19:31 ` Johannes Berg
2012-10-01 23:06 ` How do I get mac80211 debugfs? Kevin Cruz
2012-10-01 23:15 ` Kevin Cruz
2012-10-02 6:38 ` Johannes Berg
2012-10-02 11:20 ` Johannes Berg
2012-10-02 6:48 ` Rami Rosen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).