From: "Stefan Lippers-Hollmann" <s.L-H@gmx.de>
To: Adrian Chadd <adrian@freebsd.org>
Cc: linux-wireless@vger.kernel.org,
"ath9k-devel" <ath9k-devel@lists.ath9k.org>
Subject: Re: ath9k_htc test release: please test
Date: Fri, 30 Nov 2012 03:14:24 +0100 [thread overview]
Message-ID: <201211300314.51331.s.L-H@gmx.de> (raw)
In-Reply-To: <CAJ-VmomxqY4FbzRSXtXTgUbVJOSwTJJAF953UO0xN275pPTJLg@mail.gmail.com>
Hi
On Thursday 29 November 2012, Adrian Chadd wrote:
> Hi all,
>
> I've done an updated build of the ath9k_htc firmware images. I don't
> currently have a HTC setup working so this is just a recompilation of
> the current firmware.
>
> http://dev.qca.qualcomm.com/~adrian/htc/20121128/
>
> Please let me know if it works or doesn't work for you.
[…]
Seems to work for me with ar9271/ TP-Link TL-WN721N, I don't notice
anything strange so far. Feel free to ask me for any specific tests.
Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
61a01f78317eff6675f59f6a111846dd */lib/firmware/htc_9271.fw
[ 68.843124] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 68.977959] usb 1-2: New USB device found, idVendor=0cf3, idProduct=9271
[ 68.977977] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 68.977989] usb 1-2: Product: USB2.0 WLAN
[ 68.978000] usb 1-2: Manufacturer: ATHEROS
[ 68.978070] usb 1-2: SerialNumber: 12345
[ 69.013788] usb 1-2: ath9k_htc: Firmware htc_9271.fw requested
[ 69.013873] usbcore: registered new interface driver ath9k_htc
[ 69.308128] usb 1-2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 69.543716] ath9k_htc 1-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 69.753110] ath9k_htc 1-2:1.0: ath9k_htc: FW Version: 1.3
[ 69.753123] ath: EEPROM regdomain: 0x809c
[ 69.753130] ath: EEPROM indicates we should expect a country code
[ 69.753138] ath: doing EEPROM country->regdmn map search
[ 69.753145] ath: country maps to regdmn code: 0x52
[ 69.753153] ath: Country alpha2 being used: CN
[ 69.753160] ath: Regpair used: 0x52
[ 69.755825] ieee80211 phy1: Atheros AR9271 Rev:1
[ 69.756598] cfg80211: Calling CRDA for country: CN
[ 69.762598] Registered led device: ath9k_htc-phy1
[ 69.784992] cfg80211: Current regulatory domain intersected:
[ 69.785376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 69.785387] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 72.936100] cfg80211: Calling CRDA to update world regulatory domain
[ 72.956353] cfg80211: World regulatory domain updated:
[ 72.956361] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 72.956368] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 72.956373] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 72.956378] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 72.956383] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 72.956389] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 73.708543] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 74.906125] wlan1: authenticate with <MAC redacted>
[ 75.000387] wlan1: send auth to <MAC redacted> (try 1/3)
[ 75.002913] wlan1: authenticated
[ 75.052045] wlan1: associate with <MAC redacted> (try 1/3)
[ 75.055530] wlan1: RX AssocResp from <MAC redacted> (capab=0x411 status=0 aid=1)
[ 75.059506] wlan1: associated
[ 75.059586] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 75.059739] cfg80211: Calling CRDA for country: DE
[ 75.077662] ath: regdomain 0x8114 updated by CountryIE
[ 75.077673] ath: EEPROM regdomain: 0x8114
[ 75.077678] ath: EEPROM indicates we should expect a country code
[ 75.077683] ath: doing EEPROM country->regdmn map search
[ 75.077688] ath: country maps to regdmn code: 0x37
[ 75.077693] ath: Country alpha2 being used: DE
[ 75.077698] ath: Regpair used: 0x37
[ 75.077704] cfg80211: Regulatory domain changed to country: DE
[ 75.077710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 75.077718] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 75.077726] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 75.077732] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 75.077739] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
The access point is a TP-Link TL-WDR4300 (AR9344+AR9340) running a
recent OpenWrt build/ ath9k.
By the way, do you happen to know an ar7010+ar9280 dualband/ 2-stream
device that's a little easier to get hold of than the Netgear WNDA3200
(UK-only) or the Sony UWA-BR100?
Regards
Stefan Lippers-Hollmann
next prev parent reply other threads:[~2012-11-30 2:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-28 23:50 ath9k_htc test release: please test Adrian Chadd
2012-11-30 2:14 ` Stefan Lippers-Hollmann [this message]
2012-12-01 14:31 ` Christian Lamparter
2012-12-03 22:32 ` Adrian Chadd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201211300314.51331.s.L-H@gmx.de \
--to=s.l-h@gmx.de \
--cc=adrian@freebsd.org \
--cc=ath9k-devel@lists.ath9k.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).