From: "John W. Linville" <linville@tuxdriver.com>
To: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Cc: "Luis R. Rodriguez" <rodrigue@qca.qualcomm.com>,
Kalle Valo <kvalo@adurom.com>,
Johannes Berg <johannes@sipsolutions.net>,
linux-wireless@vger.kernel.org
Subject: Re: [PATCH v2] wireless: allow Atheros card to not depend on ath.ko
Date: Mon, 3 Dec 2012 08:46:44 -0500 [thread overview]
Message-ID: <20121203134643.GA26027@tuxdriver.com> (raw)
In-Reply-To: <2070615.GY0XtkW6tW@lx-vladimir>
It's in wireless-next ATM...
commit 23c1d7f65975762386760e36c00f149059e537e2
Author: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Wed Nov 28 18:57:19 2012 +0200
wireless: allow Atheros card to not depend on ath.ko
There are 2 different things:
- sub-menu for "Atheros Wireless cards" family
- module ath.ko with common Atheros code
Until now, they both used to depend on the same Kconfig variable ATH_COMMON.
Thus, being "Atheros card" and "depending on ath.ko" was the same.
To allow module to belong to the
"Atheros Wireless cards" family but not use ath.ko,
2 conditions above need to be separated.
So, this patch introduce new Kconfig variable ATH_CARDS for belonging
to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden
variable to express dependency on common Atheros code in ath.ko. Modules
that depend on this common code now express it by setting ATH_COMMON.
Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
On Mon, Dec 03, 2012 at 03:03:00PM +0200, Vladimir Kondratiev wrote:
> Hi,
>
> Any input?
>
> Luis: does it reflect reality with Atheros drivers dependency now?
>
> Thanks, Vladimir
>
> On Wednesday, November 28, 2012 06:57:19 PM Vladimir Kondratiev wrote:
> >
> > There are 2 different things:
> > - sub-menu for "Atheros Wireless cards" family
> > - module ath.ko with common Atheros code
> >
> > Until now, they both used to depend on the same Kconfig variable ATH_COMMON.
> > Thus, being "Atheros card" and "depending on ath.ko" was the same.
> >
> > To allow module to belong to the
> > "Atheros Wireless cards" family but not use ath.ko,
> > 2 conditions above need to be separated.
> >
> > So, this patch introduce new Kconfig variable ATH_CARDS for belonging
> > to the "Atheros Wireless Cards" family; while ATH_COMMON becomes hidden
> > variable to express dependency on common Atheros code in ath.ko. Modules
> > that depend on this common code now express it by setting ATH_COMMON.
> >
> > Right now, ath6kl do not depend on common code and thus do not set ATH_COMMON.
> >
> > Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
> > ---
> > drivers/net/wireless/ath/Kconfig | 7 +++++--
> > drivers/net/wireless/ath/ar5523/Kconfig | 1 +
> > drivers/net/wireless/ath/ath5k/Kconfig | 1 +
> > drivers/net/wireless/ath/ath9k/Kconfig | 1 +
> > drivers/net/wireless/ath/carl9170/Kconfig | 1 +
> > 5 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/wireless/ath/Kconfig
> > b/drivers/net/wireless/ath/Kconfig
> > index c25dcf1..1a67a4f 100644
> > --- a/drivers/net/wireless/ath/Kconfig
> > +++ b/drivers/net/wireless/ath/Kconfig
> > @@ -1,4 +1,7 @@
> > -menuconfig ATH_COMMON
> > +config ATH_COMMON
> > + tristate
> > +
> > +menuconfig ATH_CARDS
> > tristate "Atheros Wireless Cards"
> > depends on CFG80211 && (!UML || BROKEN)
> > ---help---
> > @@ -14,7 +17,7 @@ menuconfig ATH_COMMON
> >
> > http://wireless.kernel.org/en/users/Drivers/Atheros
> >
> > -if ATH_COMMON
> > +if ATH_CARDS
> >
> > config ATH_DEBUG
> > bool "Atheros wireless debugging"
> > diff --git a/drivers/net/wireless/ath/ar5523/Kconfig
> > b/drivers/net/wireless/ath/ar5523/Kconfig
> > index 11d99ee..0d320cc 100644
> > --- a/drivers/net/wireless/ath/ar5523/Kconfig
> > +++ b/drivers/net/wireless/ath/ar5523/Kconfig
> > @@ -1,6 +1,7 @@
> > config AR5523
> > tristate "Atheros AR5523 wireless driver support"
> > depends on MAC80211 && USB
> > + select ATH_COMMON
> > select FW_LOADER
> > ---help---
> > This module add support for AR5523 based USB dongles such as D-Link
> > diff --git a/drivers/net/wireless/ath/ath5k/Kconfig
> > b/drivers/net/wireless/ath/ath5k/Kconfig
> > index 338c5c4..c9f81a3 100644
> > --- a/drivers/net/wireless/ath/ath5k/Kconfig
> > +++ b/drivers/net/wireless/ath/ath5k/Kconfig
> > @@ -1,6 +1,7 @@
> > config ATH5K
> > tristate "Atheros 5xxx wireless cards support"
> > depends on (PCI || ATHEROS_AR231X) && MAC80211
> > + select ATH_COMMON
> > select MAC80211_LEDS
> > select LEDS_CLASS
> > select NEW_LEDS
> > diff --git a/drivers/net/wireless/ath/ath9k/Kconfig
> > b/drivers/net/wireless/ath/ath9k/Kconfig
> > index c7aa664..5fc15bf 100644
> > --- a/drivers/net/wireless/ath/ath9k/Kconfig
> > +++ b/drivers/net/wireless/ath/ath9k/Kconfig
> > @@ -17,6 +17,7 @@ config ATH9K_BTCOEX_SUPPORT
> > config ATH9K
> > tristate "Atheros 802.11n wireless cards support"
> > depends on MAC80211
> > + select ATH_COMMON
> > select ATH9K_HW
> > select MAC80211_LEDS
> > select LEDS_CLASS
> > diff --git a/drivers/net/wireless/ath/carl9170/Kconfig
> > b/drivers/net/wireless/ath/carl9170/Kconfig
> > index 267d5dc..13a2045 100644
> > --- a/drivers/net/wireless/ath/carl9170/Kconfig
> > +++ b/drivers/net/wireless/ath/carl9170/Kconfig
> > @@ -1,6 +1,7 @@
> > config CARL9170
> > tristate "Linux Community AR9170 802.11n USB support"
> > depends on USB && MAC80211 && EXPERIMENTAL
> > + select ATH_COMMON
> > select FW_LOADER
> > select CRC32
> > help
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2012-12-03 14:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 11:16 [PATCH v8 0/4] driver for 60g Wilocity chip wil6210 Vladimir Kondratiev
2012-11-15 11:16 ` [PATCH v8 1/4] wireless: Driver for 60GHz card wil6210 Vladimir Kondratiev
2012-11-15 11:17 ` [PATCH v8 2/4] wireless: allow Atheros card to not depend on ath.ko Vladimir Kondratiev
2012-11-21 11:18 ` Vladimir Kondratiev
2012-11-21 14:55 ` Kalle Valo
[not found] ` <CAB=NE6XP83QVZ8Vv1R247HLW3ep_quQ8yP9STKT5L_jMrpxUOA@mail.gmail.com>
2012-11-22 7:08 ` Kalle Valo
[not found] ` <CAB=NE6V2DTQD9Q2Chj0ftk4oYE1aykCJtCaeAu_WSp3RTVSjhA@mail.gmail.com>
2012-11-26 17:54 ` Vladimir Kondratiev
2012-11-28 13:55 ` Vladimir Kondratiev
2012-11-28 14:13 ` John W. Linville
2012-11-28 15:51 ` Vladimir Kondratiev
2012-11-28 15:53 ` [PATCH v2] " Vladimir Kondratiev
2012-11-28 16:59 ` Vladimir Kondratiev
[not found] ` <1585902.GCBvcuyASu@lx-vladimir>
2012-12-01 2:38 ` [RFC] How to manage dependency between patches John W. Linville
2012-12-02 8:14 ` Vladimir Kondratiev
2012-11-28 16:57 ` [PATCH v2] wireless: allow Atheros card to not depend on ath.ko Vladimir Kondratiev
2012-12-03 13:03 ` Vladimir Kondratiev
2012-12-03 13:46 ` John W. Linville [this message]
2012-12-04 7:59 ` Vladimir Kondratiev
2012-12-11 19:28 ` Kalle Valo
2012-12-12 8:07 ` Vladimir Kondratiev
2012-12-12 8:58 ` [PATCH] wireless: fix Atheros drivers compilation Vladimir Kondratiev
2012-12-12 17:08 ` Kalle Valo
2012-12-12 17:25 ` [PATCH v2] " Vladimir Kondratiev
2012-12-12 17:32 ` Kalle Valo
2012-11-15 11:17 ` [PATCH v8 3/4] wireless: integrate wil6210 driver into build Vladimir Kondratiev
2012-11-15 11:17 ` [PATCH v8 4/4] dynamic_debug: dynamic hex dump Vladimir Kondratiev
2012-11-15 11:52 ` Vladimir Kondratiev
2012-11-15 15:55 ` Andrei Emeltchenko
2012-11-15 17:32 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121203134643.GA26027@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=johannes@sipsolutions.net \
--cc=kvalo@adurom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=qca_vkondrat@qca.qualcomm.com \
--cc=rodrigue@qca.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).