From: Antonio Quartulli <antonio@open-mesh.com>
To: Will Hawkins <hawkinsw@opentechinstitute.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: Re: [PATCHv2 1/2] cfg80211: add the new IBSS_STA event
Date: Tue, 11 Dec 2012 17:53:24 +0100 [thread overview]
Message-ID: <20121211165324.GA14557@open-mesh.com> (raw)
In-Reply-To: <50C76158.1010005@opentechinstitute.org>
[-- Attachment #1: Type: text/plain, Size: 6314 bytes --]
Hi Will,
On Tue, Dec 11, 2012 at 11:37:44AM -0500, Will Hawkins wrote:
> Will this give IBSS something equivalent to the 802.11s
> NL80211_CMD_NEW_PEER_CANDIDATE?
>
I'm not very familiar with the 802.11s code, but after having given a look,
they seem to be similar. The difference is that the IBSS_STA event is triggered
only after the new station has been AUTHENTICATED, while NNEW_PEER_CANDIDATE
seems to be triggered right after having "intercepted" a new peer.
So in IBSS, with this patchset, you will have these sequence:
0) detection of a new node
1) sta_info creation and NEW_STA is triggered (this event has not been removed)
2) sta gets authenticated
3) IBSS_STA triggered => sta is ready to be handled by userspace (e.g. wpa_s)
> That's how I am reading it, but I just wanted to get some more context.
> If this is what you are adding, it's great! Just exactly what I need.
I hope the explanation above is enough, otherwise feel free to ask more :-)
>
> Thanks for your work Antonio.
>
np, thank Open-Mesh for having given me the chance to work on this ;)
Cheers,
> Will
>
> On 12/10/2012 06:16 AM, Antonio Quartulli wrote:
> > In IBSS mode it could be the case that a station being added
> > is not ready for starting higher level routines (e.g. key
> > exchange when IBSS/RSN is enabled). In particular, this can
> > happen when we are waiting for the AUTH response message.
> >
> > This IBSS_STA event is triggered after the NEW_STA one and
> > only when the upper layer is allowed to assume that the new
> > peer is ready
> >
> > Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
> > ---
> >
> > 1/2 v2:
> > * untouched
> > 2/2 v2:
> > * if userspace registered for auth frames, the new station is immediately
> > authenticated and the new IBSS_STA event is triggered.
> >
> > include/net/cfg80211.h | 8 ++++++++
> > include/uapi/linux/nl80211.h | 2 ++
> > net/wireless/mlme.c | 9 +++++++++
> > net/wireless/nl80211.c | 33 +++++++++++++++++++++++++++++++++
> > net/wireless/nl80211.h | 3 +++
> > 5 files changed, 55 insertions(+)
> >
> > diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> > index 8e6a6b7..3266c03 100644
> > --- a/include/net/cfg80211.h
> > +++ b/include/net/cfg80211.h
> > @@ -3497,6 +3497,14 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
> > struct station_info *sinfo, gfp_t gfp);
> >
> > /**
> > + * cfg80211_ibss_sta - notify userspace that the ibss station is ready
> > + * @dev: the netdev
> > + * @mac_addr: the station's address
> > + * @gfp: allocation flags
> > + */
> > +void cfg80211_ibss_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
> > +
> > +/**
> > * cfg80211_del_sta - notify userspace about deletion of a station
> > *
> > * @dev: the netdev
> > diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
> > index e3e19f8..7e0911e 100644
> > --- a/include/uapi/linux/nl80211.h
> > +++ b/include/uapi/linux/nl80211.h
> > @@ -736,6 +736,8 @@ enum nl80211_commands {
> >
> > NL80211_CMD_SET_MCAST_RATE,
> >
> > + NL80211_CMD_IBSS_STATION,
> > +
> > /* add new commands above here */
> >
> > /* used to define NL80211_CMD_MAX below */
> > diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
> > index 5e8123e..f9493fc 100644
> > --- a/net/wireless/mlme.c
> > +++ b/net/wireless/mlme.c
> > @@ -612,6 +612,15 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
> > }
> > EXPORT_SYMBOL(cfg80211_new_sta);
> >
> > +void cfg80211_ibss_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp)
> > +{
> > + struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
> > + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
> > +
> > + nl80211_send_ibss_sta_event(rdev, dev, mac_addr, gfp);
> > +}
> > +EXPORT_SYMBOL(cfg80211_ibss_sta);
> > +
> > void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp)
> > {
> > struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
> > diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> > index f45706a..2d27911 100644
> > --- a/net/wireless/nl80211.c
> > +++ b/net/wireless/nl80211.c
> > @@ -8564,6 +8564,39 @@ void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
> > nl80211_mlme_mcgrp.id, gfp);
> > }
> >
> > +void nl80211_send_ibss_sta_event(struct cfg80211_registered_device *rdev,
> > + struct net_device *dev, const u8 *mac_addr,
> > + gfp_t gfp)
> > +{
> > + struct sk_buff *msg;
> > + void *hdr;
> > +
> > + msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
> > + if (!msg)
> > + return;
> > +
> > + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_IBSS_STATION);
> > + if (!hdr) {
> > + nlmsg_free(msg);
> > + return;
> > + }
> > +
> > + if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
> > + nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr))
> > + goto nla_put_failure;
> > +
> > + genlmsg_end(msg, hdr);
> > +
> > + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
> > + nl80211_mlme_mcgrp.id, gfp);
> > + return;
> > +
> > + nla_put_failure:
> > + genlmsg_cancel(msg, hdr);
> > + nlmsg_free(msg);
> > +}
> > +
> > +
> > void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
> > struct net_device *dev, const u8 *mac_addr,
> > gfp_t gfp)
> > diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
> > index 2acba84..429f5d6 100644
> > --- a/net/wireless/nl80211.h
> > +++ b/net/wireless/nl80211.h
> > @@ -85,6 +85,9 @@ void nl80211_send_remain_on_channel_cancel(
> > void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
> > struct net_device *dev, const u8 *mac_addr,
> > struct station_info *sinfo, gfp_t gfp);
> > +void nl80211_send_ibss_sta_event(struct cfg80211_registered_device *rdev,
> > + struct net_device *dev, const u8 *mac_addr,
> > + gfp_t gfp);
> > void nl80211_send_sta_del_event(struct cfg80211_registered_device *rdev,
> > struct net_device *dev, const u8 *mac_addr,
> > gfp_t gfp);
> >
--
Antonio Quartulli
..each of us alone is worth nothing..
Ernesto "Che" Guevara
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
prev parent reply other threads:[~2012-12-11 16:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-10 11:16 [PATCHv2 1/2] cfg80211: add the new IBSS_STA event Antonio Quartulli
2012-12-10 11:16 ` [PATCHv2 2/2] mac80211: in AD-HOC mode wait for the AUTH response Antonio Quartulli
2012-12-11 16:37 ` [PATCHv2 1/2] cfg80211: add the new IBSS_STA event Will Hawkins
2012-12-11 16:53 ` Antonio Quartulli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121211165324.GA14557@open-mesh.com \
--to=antonio@open-mesh.com \
--cc=hawkinsw@opentechinstitute.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).