* [PATCH 01/14] wil6210: Remove local implementation of dynamic hexdump
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 02/14] wil6210: handle linkup/linkdown WMI events Vladimir Kondratiev
` (12 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
This functionality now integrated in kernel, local hack not needed any more
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/dbg_hexdump.h | 20 --------------------
drivers/net/wireless/ath/wil6210/wil6210.h | 6 ++----
2 files changed, 2 insertions(+), 24 deletions(-)
delete mode 100644 drivers/net/wireless/ath/wil6210/dbg_hexdump.h
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
deleted file mode 100644
index e5712f0..0000000
--- a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef WIL_DBG_HEXDUMP_H_
-#define WIL_DBG_HEXDUMP_H_
-
-#include <linux/printk.h>
-#include <linux/dynamic_debug.h>
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii) \
- dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii)
-
-#else /* defined(CONFIG_DYNAMIC_DEBUG) */
-#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii) \
- print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
- groupsize, buf, len, ascii)
-#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
-
-#endif /* WIL_DBG_HEXDUMP_H_ */
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index aea961f..bdab0e2 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -21,8 +21,6 @@
#include <linux/wireless.h>
#include <net/cfg80211.h>
-#include "dbg_hexdump.h"
-
#define WIL_NAME "wil6210"
/**
@@ -277,13 +275,13 @@ struct wil6210_priv {
#define wil_hex_dump_txrx(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
- wil_print_hex_dump_debug("DBG[TXRX]" prefix_str,\
+ print_hex_dump_debug("DBG[TXRX]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
#define wil_hex_dump_wmi(prefix_str, prefix_type, rowsize, \
groupsize, buf, len, ascii) \
- wil_print_hex_dump_debug("DBG[ WMI]" prefix_str,\
+ print_hex_dump_debug("DBG[ WMI]" prefix_str,\
prefix_type, rowsize, \
groupsize, buf, len, ascii)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 02/14] wil6210: handle linkup/linkdown WMI events
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 01/14] wil6210: Remove local implementation of dynamic hexdump Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 03/14] wil6210: handle WMI_BA_STATUS_EVENTID Vladimir Kondratiev
` (11 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Firmware indicates linkup/linkdown when data path becomes ready.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 0bb3b76..895ae9d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -528,6 +528,27 @@ static void wmi_evt_eapol_rx(struct wil6210_priv *wil, int id,
}
}
+static void wmi_evt_linkup(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wmi_data_port_open_event *evt = d;
+
+ wil_dbg_wmi(wil, "Link UP for CID %d\n", evt->cid);
+
+ netif_carrier_on(ndev);
+}
+
+static void wmi_evt_linkdown(struct wil6210_priv *wil, int id, void *d, int len)
+{
+ struct net_device *ndev = wil_to_ndev(wil);
+ struct wmi_wbe_link_down_event *evt = d;
+
+ wil_dbg_wmi(wil, "Link DOWN for CID %d, reason %d\n",
+ evt->cid, le32_to_cpu(evt->reason));
+
+ netif_carrier_off(ndev);
+}
+
static const struct {
int eventid;
void (*handler)(struct wil6210_priv *wil, int eventid,
@@ -541,6 +562,8 @@ static const struct {
{WMI_DISCONNECT_EVENTID, wmi_evt_disconnect},
{WMI_NOTIFY_REQ_DONE_EVENTID, wmi_evt_notify},
{WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx},
+ {WMI_DATA_PORT_OPEN_EVENTID, wmi_evt_linkup},
+ {WMI_WBE_LINKDOWN_EVENTID, wmi_evt_linkdown},
};
/*
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 03/14] wil6210: handle WMI_BA_STATUS_EVENTID
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 01/14] wil6210: Remove local implementation of dynamic hexdump Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 02/14] wil6210: handle linkup/linkdown WMI events Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 04/14] wil6210: do not set IE's for beacon Vladimir Kondratiev
` (10 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Firmware indicated block ack agreement status change.
For now, just log it.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 895ae9d..d636ff4 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -549,6 +549,16 @@ static void wmi_evt_linkdown(struct wil6210_priv *wil, int id, void *d, int len)
netif_carrier_off(ndev);
}
+static void wmi_evt_ba_status(struct wil6210_priv *wil, int id, void *d,
+ int len)
+{
+ struct wmi_vring_ba_status_event *evt = d;
+
+ wil_dbg_wmi(wil, "BACK[%d] %s {%d} timeout %d\n",
+ evt->ringid, evt->status ? "N/A" : "OK", evt->agg_wsize,
+ __le16_to_cpu(evt->ba_timeout));
+}
+
static const struct {
int eventid;
void (*handler)(struct wil6210_priv *wil, int eventid,
@@ -564,6 +574,7 @@ static const struct {
{WMI_EAPOL_RX_EVENTID, wmi_evt_eapol_rx},
{WMI_DATA_PORT_OPEN_EVENTID, wmi_evt_linkup},
{WMI_WBE_LINKDOWN_EVENTID, wmi_evt_linkdown},
+ {WMI_BA_STATUS_EVENTID, wmi_evt_ba_status},
};
/*
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 04/14] wil6210: do not set IE's for beacon
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (2 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 03/14] wil6210: handle WMI_BA_STATUS_EVENTID Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 05/14] wil6210: Fix garbage sent to the FW with wmi_set_ie() Vladimir Kondratiev
` (9 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
On the DMG band, there is no 'normal' beacon frame.
Instead, transmitted is short 'DMG beacon' frame, that do not include IE's
So, beacon IE's are not relevant for the DMG band.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 9ecc196..19d8d14 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -446,8 +446,13 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
/* IE's */
/* bcon 'head IE's are not relevant for 60g band */
- wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
- bcon->beacon_ies);
+ /*
+ * FW do not form regular beacon, so bcon IE's are not set
+ * For the DMG bcon, when it will be supported, bcon IE's will
+ * be reused; add something like:
+ * wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
+ * bcon->beacon_ies);
+ */
wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
bcon->proberesp_ies);
wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 05/14] wil6210: Fix garbage sent to the FW with wmi_set_ie()
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (3 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 04/14] wil6210: do not set IE's for beacon Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 06/14] wil6210: refactor connect_worker Vladimir Kondratiev
` (8 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Extra reference was taken by mistake.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d636ff4..aa642df 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -877,7 +877,7 @@ int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie)
/* BUG: FW API define ieLen as u8. Will fix FW */
cmd->ie_len = cpu_to_le16(ie_len);
memcpy(cmd->ie_info, ie, ie_len);
- rc = wmi_send(wil, WMI_SET_APPIE_CMDID, &cmd, len);
+ rc = wmi_send(wil, WMI_SET_APPIE_CMDID, cmd, len);
kfree(cmd);
return rc;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 06/14] wil6210: refactor connect_worker
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (4 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 05/14] wil6210: Fix garbage sent to the FW with wmi_set_ie() Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 07/14] wil6210: use cfg80211_inform_bss_frame() Vladimir Kondratiev
` (7 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Move wmi_connect_worker() to the main.c and change names for consistency.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/main.c | 22 +++++++++++++++++++++-
drivers/net/wireless/ath/wil6210/wil6210.h | 3 +--
drivers/net/wireless/ath/wil6210/wmi.c | 23 +----------------------
3 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 761c389..11b6960 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -118,6 +118,26 @@ static void wil_cache_mbox_regs(struct wil6210_priv *wil)
wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
}
+static void wil_connect_worker(struct work_struct *work)
+{
+ int rc;
+ struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+ connect_worker);
+ int cid = wil->pending_connect_cid;
+
+ if (cid < 0) {
+ wil_err(wil, "No connection pending\n");
+ return;
+ }
+
+ wil_dbg_wmi(wil, "Configure for connection CID %d\n", cid);
+
+ rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE, cid, 0);
+ wil->pending_connect_cid = -1;
+ if (rc == 0)
+ wil_link_on(wil);
+}
+
int wil_priv_init(struct wil6210_priv *wil)
{
wil_dbg_misc(wil, "%s()\n", __func__);
@@ -130,7 +150,7 @@ int wil_priv_init(struct wil6210_priv *wil)
wil->pending_connect_cid = -1;
setup_timer(&wil->connect_timer, wil_connect_timer_fn, (ulong)wil);
- INIT_WORK(&wil->wmi_connect_worker, wmi_connect_worker);
+ INIT_WORK(&wil->connect_worker, wil_connect_worker);
INIT_WORK(&wil->disconnect_worker, wil_disconnect_worker);
INIT_WORK(&wil->wmi_event_worker, wmi_event_worker);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index bdab0e2..5f500de 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -225,7 +225,7 @@ struct wil6210_priv {
struct workqueue_struct *wmi_wq; /* for deferred calls */
struct work_struct wmi_event_worker;
struct workqueue_struct *wmi_wq_conn; /* for connect worker */
- struct work_struct wmi_connect_worker;
+ struct work_struct connect_worker;
struct work_struct disconnect_worker;
struct timer_list connect_timer;
int pending_connect_cid;
@@ -311,7 +311,6 @@ int wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len);
void wmi_recv_cmd(struct wil6210_priv *wil);
int wmi_call(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len,
u16 reply_id, void *reply, u8 reply_size, int to_msec);
-void wmi_connect_worker(struct work_struct *work);
void wmi_event_worker(struct work_struct *work);
void wmi_event_flush(struct wil6210_priv *wil);
int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index aa642df..dd3b7b1 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -443,7 +443,7 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
memcpy(wil->dst_addr[0], evt->bssid, ETH_ALEN);
wil->pending_connect_cid = evt->cid;
- queue_work(wil->wmi_wq_conn, &wil->wmi_connect_worker);
+ queue_work(wil->wmi_wq_conn, &wil->connect_worker);
}
static void wmi_evt_disconnect(struct wil6210_priv *wil, int id,
@@ -1031,24 +1031,3 @@ void wmi_event_worker(struct work_struct *work)
kfree(evt);
}
}
-
-void wmi_connect_worker(struct work_struct *work)
-{
- int rc;
- struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
- wmi_connect_worker);
-
- if (wil->pending_connect_cid < 0) {
- wil_err(wil, "No connection pending\n");
- return;
- }
-
- wil_dbg_wmi(wil, "Configure for connection CID %d\n",
- wil->pending_connect_cid);
-
- rc = wil_vring_init_tx(wil, 0, WIL6210_TX_RING_SIZE,
- wil->pending_connect_cid, 0);
- wil->pending_connect_cid = -1;
- if (rc == 0)
- wil_link_on(wil);
-}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 07/14] wil6210: use cfg80211_inform_bss_frame()
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (5 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 06/14] wil6210: refactor connect_worker Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 08/14] wil6210: report all received mgmt frames Vladimir Kondratiev
` (6 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Avoid unnecessary frame parsing
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index dd3b7b1..9c06942 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -324,17 +324,9 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
if (ieee80211_is_beacon(fc) || ieee80211_is_probe_resp(fc)) {
struct cfg80211_bss *bss;
- u64 tsf = le64_to_cpu(rx_mgmt_frame->u.beacon.timestamp);
- u16 cap = le16_to_cpu(rx_mgmt_frame->u.beacon.capab_info);
- u16 bi = le16_to_cpu(rx_mgmt_frame->u.beacon.beacon_int);
- const u8 *ie_buf = rx_mgmt_frame->u.beacon.variable;
- size_t ie_len = d_len - offsetof(struct ieee80211_mgmt,
- u.beacon.variable);
- wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap);
-
- bss = cfg80211_inform_bss(wiphy, channel, rx_mgmt_frame->bssid,
- tsf, cap, bi, ie_buf, ie_len,
- signal, GFP_KERNEL);
+
+ bss = cfg80211_inform_bss_frame(wiphy, channel, rx_mgmt_frame,
+ d_len, signal, GFP_KERNEL);
if (bss) {
wil_dbg_wmi(wil, "Added BSS %pM\n",
rx_mgmt_frame->bssid);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 08/14] wil6210: report all received mgmt frames
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (6 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 07/14] wil6210: use cfg80211_inform_bss_frame() Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 09/14] wil6210: fix FW error notification Vladimir Kondratiev
` (5 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Pass to cfg80211 all management frames.
Used by wpa_supplicant.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/wmi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 9c06942..dc2ad85 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -334,6 +334,9 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
} else {
wil_err(wil, "cfg80211_inform_bss() failed\n");
}
+ } else {
+ cfg80211_rx_mgmt(wil->wdev, freq, signal,
+ (void *)rx_mgmt_frame, d_len, GFP_KERNEL);
}
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 09/14] wil6210: fix FW error notification
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (7 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 08/14] wil6210: report all received mgmt frames Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 10/14] wil6210: use WLAN_CAPABILITY_DMG_TYPE_MASK Vladimir Kondratiev
` (4 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
user space get notified through kobject_uevent_env(), that might sleep and thus
should run in thread context.
Move user space notification to the thread handler, while mark FW is non-functional
right in the hard IRQ.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index dc97e7b..de9b971 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -257,10 +257,13 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
wil6210_mask_irq_misc(wil);
if (isr & ISR_MISC_FW_ERROR) {
- wil_dbg_irq(wil, "IRQ: Firmware error\n");
+ wil_err(wil, "Firmware error detected\n");
clear_bit(wil_status_fwready, &wil->status);
- wil_notify_fw_error(wil);
- isr &= ~ISR_MISC_FW_ERROR;
+ /*
+ * do not clear @isr here - we do 2-nd part in thread
+ * there, user space get notified, and it should be done
+ * in non-atomic context
+ */
}
if (isr & ISR_MISC_FW_READY) {
@@ -289,6 +292,11 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie)
wil_dbg_irq(wil, "Thread ISR MISC 0x%08x\n", isr);
+ if (isr & ISR_MISC_FW_ERROR) {
+ wil_notify_fw_error(wil);
+ isr &= ~ISR_MISC_FW_ERROR;
+ }
+
if (isr & ISR_MISC_MBOX_EVT) {
wil_dbg_irq(wil, "MBOX event\n");
wmi_recv_cmd(wil);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 10/14] wil6210: use WLAN_CAPABILITY_DMG_TYPE_MASK
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (8 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 09/14] wil6210: fix FW error notification Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 11/14] wil6210: headers clean-up Vladimir Kondratiev
` (3 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 19d8d14..39404a8 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -292,7 +292,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
/* WMI_CONNECT_CMD */
memset(&conn, 0, sizeof(conn));
- switch (bss->capability & 0x03) {
+ switch (bss->capability & WLAN_CAPABILITY_DMG_TYPE_MASK) {
case WLAN_CAPABILITY_DMG_TYPE_AP:
conn.network_type = WMI_NETTYPE_INFRA;
break;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 11/14] wil6210: headers clean-up
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (9 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 10/14] wil6210: use WLAN_CAPABILITY_DMG_TYPE_MASK Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 12/14] wil6210: new SW reset Vladimir Kondratiev
` (2 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 8 --------
drivers/net/wireless/ath/wil6210/main.c | 6 ------
drivers/net/wireless/ath/wil6210/netdev.c | 3 ---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 3 ---
drivers/net/wireless/ath/wil6210/txrx.c | 3 ---
drivers/net/wireless/ath/wil6210/wmi.c | 3 ---
6 files changed, 26 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 39404a8..feb33ac 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -14,15 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/sched.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/slab.h>
#include <linux/version.h>
-#include <net/cfg80211.h>
#include "wil6210.h"
#include "wmi.h"
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 11b6960..f11efa4 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -14,12 +14,6 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/sched.h>
-#include <linux/ieee80211.h>
-#include <linux/wireless.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 8ce2e33..098a8ec 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -14,10 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/module.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/slab.h>
#include "wil6210.h"
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 81c35c6..eb1dc7a 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -14,10 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index d1315b4..4af9967 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -14,10 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/hardirq.h>
#include <net/ieee80211_radiotap.h>
#include <linux/if_arp.h>
#include <linux/moduleparam.h>
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index dc2ad85..8d9e145 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -14,9 +14,6 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/list.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 12/14] wil6210: new SW reset
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (10 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 11/14] wil6210: headers clean-up Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 13/14] wil6210: sync with new firmware Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 14/14] wil6210: temperature measurement Vladimir Kondratiev
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
New firmware allows for shorter SW reset procedure.
After SW reset, FW raises "fw done" IRQ, at this
moment mailbox control structures are initialized, driver caches it.
New status bit wil_status_reset_done introduced to track completion
of the reset. It is set by "fw ready" irq, and required for WMI rx flow
to access control structures.
WMI Tx flow protected by other status bit, wil_status_fwready. It can't
be set before wil_status_reset_done is set by design.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 11 +++++++++++
drivers/net/wireless/ath/wil6210/main.c | 23 -----------------------
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 5 +++++
4 files changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index de9b971..e3c1e76 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -240,6 +240,15 @@ static void wil_notify_fw_error(struct wil6210_priv *wil)
kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
}
+static void wil_cache_mbox_regs(struct wil6210_priv *wil)
+{
+ /* make shadow copy of registers that should not change on run time */
+ wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
+ sizeof(struct wil6210_mbox_ctl));
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
+ wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
+}
+
static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
{
struct wil6210_priv *wil = cookie;
@@ -268,6 +277,8 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
if (isr & ISR_MISC_FW_READY) {
wil_dbg_irq(wil, "IRQ: FW ready\n");
+ wil_cache_mbox_regs(wil);
+ set_bit(wil_status_reset_done, &wil->status);
/**
* Actual FW ready indicated by the
* WMI_FW_READY_EVENTID
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index f11efa4..9d05628 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -103,15 +103,6 @@ static void wil_connect_timer_fn(ulong x)
schedule_work(&wil->disconnect_worker);
}
-static void wil_cache_mbox_regs(struct wil6210_priv *wil)
-{
- /* make shadow copy of registers that should not change on run time */
- wil_memcpy_fromio_32(&wil->mbox_ctl, wil->csr + HOST_MBOX,
- sizeof(struct wil6210_mbox_ctl));
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.rx);
- wil_mbox_ring_le2cpus(&wil->mbox_ctl.tx);
-}
-
static void wil_connect_worker(struct work_struct *work)
{
int rc;
@@ -161,8 +152,6 @@ int wil_priv_init(struct wil6210_priv *wil)
return -EAGAIN;
}
- wil_cache_mbox_regs(wil);
-
return 0;
}
@@ -199,15 +188,11 @@ static void wil_target_reset(struct wil6210_priv *wil)
W(RGF_USER_MAC_CPU_0, BIT(1)); /* mac_cpu_man_rst */
W(RGF_USER_USER_CPU_0, BIT(1)); /* user_cpu_man_rst */
- msleep(100);
-
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000170);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FC00);
- msleep(100);
-
W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0);
@@ -217,12 +202,6 @@ static void wil_target_reset(struct wil6210_priv *wil)
W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080);
W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0);
- msleep(2000);
-
- W(RGF_USER_USER_CPU_0, BIT(0)); /* user_cpu_man_de_rst */
-
- msleep(2000);
-
wil_dbg_misc(wil, "Reset completed\n");
#undef W
@@ -279,8 +258,6 @@ int wil_reset(struct wil6210_priv *wil)
wil->pending_connect_cid = -1;
INIT_COMPLETION(wil->wmi_ready);
- wil_cache_mbox_regs(wil);
-
/* TODO: release MAC reset */
wil6210_enable_irq(wil);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 5f500de..2ec7258 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -186,6 +186,7 @@ enum { /* for wil6210_priv.status */
wil_status_fwready = 0,
wil_status_fwconnected,
wil_status_dontscan,
+ wil_status_reset_done,
wil_status_irqen, /* FIXME: interrupts enabled - for debug */
};
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 8d9e145..ed2b097 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -585,6 +585,11 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
void __iomem *src;
ulong flags;
+ if (!test_bit(wil_status_reset_done, &wil->status)) {
+ wil_err(wil, "Reset not completed\n");
+ return;
+ }
+
for (;;) {
u16 len;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 13/14] wil6210: sync with new firmware
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (11 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 12/14] wil6210: new SW reset Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 12:12 ` [PATCH 14/14] wil6210: temperature measurement Vladimir Kondratiev
13 siblings, 0 replies; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Adjust driver for changes in the FW API.
Noticeable changes in the FW are:
- temperature sensing
- infrastructure for multiple connections
- infrastructure for P2P
- signal strength indication
This commit introduces only changes that are required to support same functionality
as previous firmware, no new features.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 12 +-
drivers/net/wireless/ath/wil6210/main.c | 15 +-
drivers/net/wireless/ath/wil6210/txrx.c | 2 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 6 +-
drivers/net/wireless/ath/wil6210/wmi.c | 45 +++-
drivers/net/wireless/ath/wil6210/wmi.h | 363 +++++++++++++++++++--------
6 files changed, 321 insertions(+), 122 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index feb33ac..ebb92cbe 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -429,10 +429,6 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
if (rc)
return rc;
- rc = wmi_set_channel(wil, channel->hw_value);
- if (rc)
- return rc;
-
/* MAC address - pre-requisite for other commands */
wmi_set_mac_address(wil, ndev->dev_addr);
@@ -452,7 +448,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
wil->secure_pcp = info->privacy;
- rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype);
+ rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
+ channel->hw_value);
if (rc)
return rc;
@@ -469,11 +466,8 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
{
int rc = 0;
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- struct wireless_dev *wdev = ndev->ieee80211_ptr;
- u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
- /* To stop beaconing, set BI to 0 */
- rc = wmi_set_bcon(wil, 0, wmi_nettype);
+ rc = wmi_pcp_stop(wil);
return rc;
}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 9d05628..a0478e2 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -343,9 +343,9 @@ static int __wil_up(struct wil6210_priv *wil)
wil_err(wil, "SSID not set\n");
return -EINVAL;
}
- wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
- if (channel)
- wmi_set_channel(wil, channel->hw_value);
+ rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+ if (rc)
+ return rc;
break;
default:
break;
@@ -355,9 +355,12 @@ static int __wil_up(struct wil6210_priv *wil)
wmi_set_mac_address(wil, ndev->dev_addr);
/* Set up beaconing if required. */
- rc = wmi_set_bcon(wil, bi, wmi_nettype);
- if (rc)
- return rc;
+ if (bi > 0) {
+ rc = wmi_pcp_start(wil, bi, wmi_nettype,
+ (channel ? channel->hw_value : 0));
+ if (rc)
+ return rc;
+ }
/* Rx VRING. After MAC and beacon */
wil_rx_init(wil);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 4af9967..1bfa736 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -557,7 +557,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
if (rc)
goto out_free;
- if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) {
+ if (reply.cmd.status != WMI_FW_STATUS_SUCCESS) {
wil_err(wil, "Tx config failed, status 0x%02x\n",
reply.cmd.status);
rc = -EINVAL;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 2ec7258..3bbd86d 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -209,6 +209,8 @@ struct wil6210_priv {
struct wireless_dev *wdev;
void __iomem *csr;
ulong status;
+ u32 fw_version;
+ u8 n_mids; /* number of additional MIDs as reported by FW */
/* profile */
u32 monitor_flags;
u32 secure_pcp; /* create secure PCP? */
@@ -326,6 +328,7 @@ int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
int wmi_echo(struct wil6210_priv *wil);
int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
+int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
int wil6210_init_irq(struct wil6210_priv *wil, int irq);
void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
@@ -339,7 +342,8 @@ struct wireless_dev *wil_cfg80211_init(struct device *dev);
void wil_wdev_free(struct wil6210_priv *wil);
int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
-int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype);
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
+int wmi_pcp_stop(struct wil6210_priv *wil);
void wil6210_disconnect(struct wil6210_priv *wil, void *bssid);
int wil_rx_init(struct wil6210_priv *wil);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index ed2b097..706ee9d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -269,16 +269,18 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
struct wmi_ready_event *evt = d;
- u32 ver = le32_to_cpu(evt->sw_version);
+ wil->fw_version = le32_to_cpu(evt->sw_version);
+ wil->n_mids = evt->numof_additional_mids;
- wil_dbg_wmi(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac);
+ wil_dbg_wmi(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version,
+ evt->mac, wil->n_mids);
if (!is_valid_ether_addr(ndev->dev_addr)) {
memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
memcpy(ndev->perm_addr, evt->mac, ETH_ALEN);
}
snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
- "%d", ver);
+ "%d", wil->fw_version);
}
static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
@@ -714,18 +716,39 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
}
-int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype)
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
{
- struct wmi_bcon_ctrl_cmd cmd = {
+ int rc;
+
+ struct wmi_pcp_start_cmd cmd = {
.bcon_interval = cpu_to_le16(bi),
.network_type = wmi_nettype,
.disable_sec_offload = 1,
+ .channel = chan,
};
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_pcp_started_event evt;
+ } __packed reply;
if (!wil->secure_pcp)
cmd.disable_sec = 1;
- return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd));
+ rc = wmi_call(wil, WMI_PCP_START_CMDID, &cmd, sizeof(cmd),
+ WMI_PCP_STARTED_EVENTID, &reply, sizeof(reply), 100);
+ if (rc)
+ return rc;
+
+ if (reply.evt.status != WMI_FW_STATUS_SUCCESS)
+ rc = -EINVAL;
+
+ return rc;
+}
+
+int wmi_pcp_stop(struct wil6210_priv *wil)
+{
+ return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0,
+ WMI_PCP_STOPPED_EVENTID, NULL, 0, 20);
}
int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid)
@@ -796,6 +819,16 @@ int wmi_get_channel(struct wil6210_priv *wil, int *channel)
return 0;
}
+int wmi_p2p_cfg(struct wil6210_priv *wil, int channel)
+{
+ struct wmi_p2p_cfg_cmd cmd = {
+ .discovery_mode = WMI_DISCOVERY_MODE_NON_OFFLOAD,
+ .channel = channel - 1,
+ };
+
+ return wmi_send(wil, WMI_P2P_CFG_CMDID, &cmd, sizeof(cmd));
+}
+
int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
{
struct wmi_eapol_tx_cmd *cmd;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 3bbf875..50b8528 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -36,6 +36,7 @@
enum wmi_command_id {
WMI_CONNECT_CMDID = 0x0001,
WMI_DISCONNECT_CMDID = 0x0003,
+ WMI_DISCONNECT_STA_CMDID = 0x0004,
WMI_START_SCAN_CMDID = 0x0007,
WMI_SET_BSS_FILTER_CMDID = 0x0009,
WMI_SET_PROBED_SSID_CMDID = 0x000a,
@@ -44,7 +45,6 @@ enum wmi_command_id {
WMI_ADD_CIPHER_KEY_CMDID = 0x0016,
WMI_DELETE_CIPHER_KEY_CMDID = 0x0017,
WMI_SET_APPIE_CMDID = 0x003f,
- WMI_GET_APPIE_CMDID = 0x0040,
WMI_SET_WSC_STATUS_CMDID = 0x0041,
WMI_PXMT_RANGE_CFG_CMDID = 0x0042,
WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x0043,
@@ -55,11 +55,11 @@ enum wmi_command_id {
WMI_DEEP_ECHO_CMDID = 0x0804,
WMI_CONFIG_MAC_CMDID = 0x0805,
WMI_CONFIG_PHY_DEBUG_CMDID = 0x0806,
- WMI_ADD_STATION_CMDID = 0x0807,
WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x0808,
WMI_PHY_GET_STATISTICS_CMDID = 0x0809,
WMI_FS_TUNE_CMDID = 0x080a,
WMI_CORR_MEASURE_CMDID = 0x080b,
+ WMI_READ_RSSI_CMDID = 0x080c,
WMI_TEMP_SENSE_CMDID = 0x080e,
WMI_DC_CALIB_CMDID = 0x080f,
WMI_SEND_TONE_CMDID = 0x0810,
@@ -75,9 +75,9 @@ enum wmi_command_id {
MAC_IO_STATIC_PARAMS_CMDID = 0x081b,
MAC_IO_DYNAMIC_PARAMS_CMDID = 0x081c,
WMI_SILENT_RSSI_CALIB_CMDID = 0x081d,
+ WMI_RF_RX_TEST_CMDID = 0x081e,
WMI_CFG_RX_CHAIN_CMDID = 0x0820,
WMI_VRING_CFG_CMDID = 0x0821,
- WMI_RX_ON_CMDID = 0x0822,
WMI_VRING_BA_EN_CMDID = 0x0823,
WMI_VRING_BA_DIS_CMDID = 0x0824,
WMI_RCP_ADDBA_RESP_CMDID = 0x0825,
@@ -87,7 +87,6 @@ enum wmi_command_id {
WMI_SET_PCP_CHANNEL_CMDID = 0x0829,
WMI_GET_PCP_CHANNEL_CMDID = 0x082a,
WMI_SW_TX_REQ_CMDID = 0x082b,
- WMI_RX_OFF_CMDID = 0x082c,
WMI_READ_MAC_RXQ_CMDID = 0x0830,
WMI_READ_MAC_TXQ_CMDID = 0x0831,
WMI_WRITE_MAC_RXQ_CMDID = 0x0832,
@@ -112,6 +111,18 @@ enum wmi_command_id {
WMI_FLASH_READ_CMDID = 0x0902,
WMI_FLASH_WRITE_CMDID = 0x0903,
WMI_SECURITY_UNIT_TEST_CMDID = 0x0904,
+ /*P2P*/
+ WMI_P2P_CFG_CMDID = 0x0910,
+ WMI_PORT_ALLOCATE_CMDID = 0x0911,
+ WMI_PORT_DELETE_CMDID = 0x0912,
+ WMI_POWER_MGMT_CFG_CMDID = 0x0913,
+ WMI_START_LISTEN_CMDID = 0x0914,
+ WMI_START_SEARCH_CMDID = 0x0915,
+ WMI_DISCOVERY_START_CMDID = 0x0916,
+ WMI_DISCOVERY_STOP_CMDID = 0x0917,
+ WMI_PCP_START_CMDID = 0x0918,
+ WMI_PCP_STOP_CMDID = 0x0919,
+ WMI_GET_PCP_FACTOR_CMDID = 0x091b,
WMI_SET_MAC_ADDRESS_CMDID = 0xf003,
WMI_ABORT_SCAN_CMDID = 0xf007,
@@ -132,18 +143,6 @@ enum wmi_command_id {
*/
/*
- * Frame Types
- */
-enum wmi_mgmt_frame_type {
- WMI_FRAME_BEACON = 0,
- WMI_FRAME_PROBE_REQ = 1,
- WMI_FRAME_PROBE_RESP = 2,
- WMI_FRAME_ASSOC_REQ = 3,
- WMI_FRAME_ASSOC_RESP = 4,
- WMI_NUM_MGMT_FRAME,
-};
-
-/*
* WMI_CONNECT_CMDID
*/
enum wmi_network_type {
@@ -184,7 +183,7 @@ enum wmi_crypto_type {
enum wmi_connect_ctrl_flag_bits {
WMI_CONNECT_ASSOC_POLICY_USER = 0x0001,
WMI_CONNECT_SEND_REASSOC = 0x0002,
- WMI_CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ WMI_CONNECT_IGNORE_WPA_GROUP_CIPHER = 0x0004,
WMI_CONNECT_PROFILE_MATCH_DONE = 0x0008,
WMI_CONNECT_IGNORE_AAC_BEACON = 0x0010,
WMI_CONNECT_CSA_FOLLOW_BSS = 0x0020,
@@ -212,6 +211,13 @@ struct wmi_connect_cmd {
u8 reserved1[2];
} __packed;
+/*
+ * WMI_DISCONNECT_STA_CMDID
+ */
+struct wmi_disconnect_sta_cmd {
+ u8 dst_mac[WMI_MAC_LEN];
+ __le16 disconnect_reason;
+} __packed;
/*
* WMI_RECONNECT_CMDID
@@ -289,10 +295,12 @@ struct wmi_delete_cipher_key_cmd {
enum wmi_scan_type {
WMI_LONG_SCAN = 0,
WMI_SHORT_SCAN = 1,
+ WMI_PBC_SCAN = 2,
};
struct wmi_start_scan_cmd {
u8 reserved[8];
+
__le32 home_dwell_time; /* Max duration in the home channel(ms) */
__le32 force_scan_interval; /* Time interval between scans (ms)*/
u8 scan_type; /* wmi_scan_type */
@@ -309,7 +317,7 @@ struct wmi_start_scan_cmd {
/*
* WMI_SET_PROBED_SSID_CMDID
*/
-#define MAX_PROBED_SSID_INDEX (15)
+#define MAX_PROBED_SSID_INDEX (3)
enum wmi_ssid_flag {
WMI_SSID_FLAG_DISABLE = 0, /* disables entry */
@@ -328,6 +336,20 @@ struct wmi_probed_ssid_cmd {
* WMI_SET_APPIE_CMDID
* Add Application specified IE to a management frame
*/
+#define WMI_MAX_IE_LEN (1024)
+
+/*
+ * Frame Types
+ */
+enum wmi_mgmt_frame_type {
+ WMI_FRAME_BEACON = 0,
+ WMI_FRAME_PROBE_REQ = 1,
+ WMI_FRAME_PROBE_RESP = 2,
+ WMI_FRAME_ASSOC_REQ = 3,
+ WMI_FRAME_ASSOC_RESP = 4,
+ WMI_NUM_MGMT_FRAME,
+};
+
struct wmi_set_appie_cmd {
u8 mgmt_frm_type; /* enum wmi_mgmt_frame_type */
u8 reserved;
@@ -335,13 +357,18 @@ struct wmi_set_appie_cmd {
u8 ie_info[0];
} __packed;
-#define WMI_MAX_IE_LEN (1024)
+/*
+ * WMI_PXMT_RANGE_CFG_CMDID
+ */
struct wmi_pxmt_range_cfg_cmd {
u8 dst_mac[WMI_MAC_LEN];
__le16 range;
} __packed;
+/*
+ * WMI_PXMT_SNR2_RANGE_CFG_CMDID
+ */
struct wmi_pxmt_snr2_range_cfg_cmd {
s8 snr2range_arr[WMI_PROX_RANGE_NUM-1];
} __packed;
@@ -359,6 +386,23 @@ struct wmi_rf_mgmt_cmd {
__le32 rf_mgmt_type;
} __packed;
+
+/*
+ * WMI_RF_RX_TEST_CMDID
+ */
+struct wmi_rf_rx_test_cmd {
+ __le32 sector;
+} __packed;
+
+/*
+ * WMI_CORR_MEASURE_CMDID
+ */
+struct wmi_corr_measure_cmd {
+ s32 freq_mhz;
+ __le32 length_samples;
+ __le32 iterations;
+} __packed;
+
/*
* WMI_SET_SSID_CMDID
*/
@@ -388,6 +432,74 @@ struct wmi_bcon_ctrl_cmd {
u8 disable_sec;
} __packed;
+
+/******* P2P ***********/
+
+/*
+ * WMI_PORT_ALLOCATE_CMDID
+ */
+enum wmi_port_role {
+ WMI_PORT_STA = 0,
+ WMI_PORT_PCP = 1,
+ WMI_PORT_AP = 2,
+ WMI_PORT_P2P_DEV = 3,
+ WMI_PORT_P2P_CLIENT = 4,
+ WMI_PORT_P2P_GO = 5,
+};
+
+struct wmi_port_allocate_cmd {
+ u8 mac[WMI_MAC_LEN];
+ u8 port_role;
+ u8 midid;
+} __packed;
+
+/*
+ * WMI_PORT_DELETE_CMDID
+ */
+struct wmi_delete_port_cmd {
+ u8 mid;
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_P2P_CFG_CMDID
+ */
+enum wmi_discovery_mode {
+ WMI_DISCOVERY_MODE_NON_OFFLOAD = 0,
+ WMI_DISCOVERY_MODE_OFFLOAD = 1,
+};
+
+struct wmi_p2p_cfg_cmd {
+ u8 discovery_mode; /* wmi_discovery_mode */
+ u8 channel;
+ __le16 bcon_interval; /* base to listen/search duration calculation */
+} __packed;
+
+/*
+ * WMI_POWER_MGMT_CFG_CMDID
+ */
+enum wmi_power_source_type {
+ WMI_POWER_SOURCE_BATTERY = 0,
+ WMI_POWER_SOURCE_OTHER = 1,
+};
+
+struct wmi_power_mgmt_cfg_cmd {
+ u8 power_source; /* wmi_power_source_type */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_PCP_START_CMDID
+ */
+struct wmi_pcp_start_cmd {
+ __le16 bcon_interval;
+ u8 reserved0[10];
+ u8 network_type;
+ u8 channel;
+ u8 disable_sec_offload;
+ u8 disable_sec;
+} __packed;
+
/*
* WMI_SW_TX_REQ_CMDID
*/
@@ -435,16 +547,17 @@ enum wmi_vring_cfg_schd_params_priority {
WMI_SCH_PRIO_HIGH = 1,
};
+#define CIDXTID_CID_POS (0)
+#define CIDXTID_CID_LEN (4)
+#define CIDXTID_CID_MSK (0xF)
+#define CIDXTID_TID_POS (4)
+#define CIDXTID_TID_LEN (4)
+#define CIDXTID_TID_MSK (0xF0)
+
struct wmi_vring_cfg {
struct wmi_sw_ring_cfg tx_sw_ring;
u8 ringid; /* 0-23 vrings */
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
u8 encap_trans_type;
@@ -501,8 +614,14 @@ struct wmi_vring_ba_dis_cmd {
*/
struct wmi_notify_req_cmd {
u8 cid;
- u8 reserved[3];
+ u8 year;
+ u8 month;
+ u8 day;
__le32 interval_usec;
+ u8 hour;
+ u8 minute;
+ u8 second;
+ u8 miliseconds;
} __packed;
/*
@@ -548,6 +667,11 @@ enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 2,
};
+enum wmi_cfg_rx_chain_cmd_reorder_type {
+ WMI_RX_HW_REORDER = 0,
+ WMI_RX_SW_REORDER = 1,
+};
+
struct wmi_cfg_rx_chain_cmd {
__le32 action;
struct wmi_sw_ring_cfg rx_sw_ring;
@@ -596,7 +720,8 @@ struct wmi_cfg_rx_chain_cmd {
__le16 wb_thrsh;
__le32 itr_value;
__le16 host_thrsh;
- u8 reserved[2];
+ u8 reorder_type;
+ u8 reserved;
struct wmi_sniffer_cfg sniffer_cfg;
} __packed;
@@ -604,15 +729,7 @@ struct wmi_cfg_rx_chain_cmd {
* WMI_RCP_ADDBA_RESP_CMDID
*/
struct wmi_rcp_addba_resp_cmd {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 dialog_token;
__le16 status_code;
__le16 ba_param_set; /* ieee80211_ba_parameterset field to send */
@@ -623,15 +740,7 @@ struct wmi_rcp_addba_resp_cmd {
* WMI_RCP_DELBA_CMDID
*/
struct wmi_rcp_delba_cmd {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 reserved;
__le16 reason;
} __packed;
@@ -640,15 +749,7 @@ struct wmi_rcp_delba_cmd {
* WMI_RCP_ADDBA_REQ_CMDID
*/
struct wmi_rcp_addba_req_cmd {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 dialog_token;
/* ieee80211_ba_parameterset field as it received */
__le16 ba_param_set;
@@ -665,7 +766,6 @@ struct wmi_set_mac_address_cmd {
u8 reserved[2];
} __packed;
-
/*
* WMI_EAPOL_TX_CMDID
*/
@@ -692,6 +792,17 @@ struct wmi_echo_cmd {
} __packed;
/*
+ * WMI_TEMP_SENSE_CMDID
+ *
+ * Measure MAC and radio temperatures
+ */
+struct wmi_temp_sense_cmd {
+ __le32 measure_marlon_m_en;
+ __le32 measure_marlon_r_en;
+} __packed;
+
+
+/*
* WMI Events
*/
@@ -699,7 +810,6 @@ struct wmi_echo_cmd {
* List of Events (target to host)
*/
enum wmi_event_id {
- WMI_IMM_RSP_EVENTID = 0x0000,
WMI_READY_EVENTID = 0x1001,
WMI_CONNECT_EVENTID = 0x1002,
WMI_DISCONNECT_EVENTID = 0x1003,
@@ -709,13 +819,9 @@ enum wmi_event_id {
WMI_FW_READY_EVENTID = 0x1801,
WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x0200,
WMI_ECHO_RSP_EVENTID = 0x1803,
- WMI_CONFIG_MAC_DONE_EVENTID = 0x1805,
- WMI_CONFIG_PHY_DEBUG_DONE_EVENTID = 0x1806,
- WMI_ADD_STATION_DONE_EVENTID = 0x1807,
- WMI_ADD_DEBUG_TX_PCKT_DONE_EVENTID = 0x1808,
- WMI_PHY_GET_STATISTICS_EVENTID = 0x1809,
WMI_FS_TUNE_DONE_EVENTID = 0x180a,
- WMI_CORR_MEASURE_DONE_EVENTID = 0x180b,
+ WMI_CORR_MEASURE_EVENTID = 0x180b,
+ WMI_READ_RSSI_EVENTID = 0x180c,
WMI_TEMP_SENSE_DONE_EVENTID = 0x180e,
WMI_DC_CALIB_DONE_EVENTID = 0x180f,
WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
@@ -727,10 +833,9 @@ enum wmi_event_id {
WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181a,
WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181d,
-
+ WMI_RF_RX_TEST_DONE_EVENTID = 0x181e,
WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
WMI_VRING_CFG_DONE_EVENTID = 0x1821,
- WMI_RX_ON_DONE_EVENTID = 0x1822,
WMI_BA_STATUS_EVENTID = 0x1823,
WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
WMI_ADDBA_RESP_SENT_EVENTID = 0x1825,
@@ -738,7 +843,6 @@ enum wmi_event_id {
WMI_GET_SSID_EVENTID = 0x1828,
WMI_GET_PCP_CHANNEL_EVENTID = 0x182a,
WMI_SW_TX_COMPLETE_EVENTID = 0x182b,
- WMI_RX_OFF_DONE_EVENTID = 0x182c,
WMI_READ_MAC_RXQ_EVENTID = 0x1830,
WMI_READ_MAC_TXQ_EVENTID = 0x1831,
@@ -765,7 +869,16 @@ enum wmi_event_id {
WMI_UNIT_TEST_EVENTID = 0x1900,
WMI_FLASH_READ_DONE_EVENTID = 0x1902,
WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
-
+ /*P2P*/
+ WMI_PORT_ALLOCATED_EVENTID = 0x1911,
+ WMI_PORT_DELETED_EVENTID = 0x1912,
+ WMI_LISTEN_STARTED_EVENTID = 0x1914,
+ WMI_SEARCH_STARTED_EVENTID = 0x1915,
+ WMI_DISCOVERY_STARTED_EVENTID = 0x1916,
+ WMI_DISCOVERY_STOPPED_EVENTID = 0x1917,
+ WMI_PCP_STARTED_EVENTID = 0x1918,
+ WMI_PCP_STOPPED_EVENTID = 0x1919,
+ WMI_PCP_FACTOR_EVENTID = 0x191a,
WMI_SET_CHANNEL_EVENTID = 0x9000,
WMI_ASSOC_REQ_EVENTID = 0x9001,
WMI_EAPOL_RX_EVENTID = 0x9002,
@@ -777,6 +890,12 @@ enum wmi_event_id {
* Events data structures
*/
+
+enum wmi_fw_status {
+ WMI_FW_STATUS_SUCCESS,
+ WMI_FW_STATUS_FAILURE,
+};
+
/*
* WMI_RF_MGMT_STATUS_EVENTID
*/
@@ -857,7 +976,7 @@ struct wmi_ready_event {
__le32 abi_version;
u8 mac[WMI_MAC_LEN];
u8 phy_capability; /* enum wmi_phy_capability */
- u8 reserved;
+ u8 numof_additional_mids;
} __packed;
/*
@@ -876,6 +995,8 @@ struct wmi_notify_req_done_event {
__le16 other_rx_sector;
__le16 other_tx_sector;
__le16 range;
+ u8 sqi;
+ u8 reserved[3];
} __packed;
/*
@@ -951,27 +1072,15 @@ struct wmi_vring_ba_status_event {
* WMI_DELBA_EVENTID
*/
struct wmi_delba_event {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 from_initiator;
__le16 reason;
} __packed;
+
/*
* WMI_VRING_CFG_DONE_EVENTID
*/
-enum wmi_vring_cfg_done_event_status {
- WMI_VRING_CFG_SUCCESS = 0,
- WMI_VRING_CFG_FAILURE = 1,
-};
-
struct wmi_vring_cfg_done_event {
u8 ringid;
u8 status;
@@ -982,21 +1091,8 @@ struct wmi_vring_cfg_done_event {
/*
* WMI_ADDBA_RESP_SENT_EVENTID
*/
-enum wmi_rcp_addba_resp_sent_event_status {
- WMI_ADDBA_SUCCESS = 0,
- WMI_ADDBA_FAIL = 1,
-};
-
struct wmi_rcp_addba_resp_sent_event {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 reserved;
__le16 status;
} __packed;
@@ -1005,15 +1101,7 @@ struct wmi_rcp_addba_resp_sent_event {
* WMI_RCP_ADDBA_REQ_EVENTID
*/
struct wmi_rcp_addba_req_event {
-
- #define CIDXTID_CID_POS (0)
- #define CIDXTID_CID_LEN (4)
- #define CIDXTID_CID_MSK (0xF)
- #define CIDXTID_TID_POS (4)
- #define CIDXTID_TID_LEN (4)
- #define CIDXTID_TID_MSK (0xF0)
u8 cidxtid;
-
u8 dialog_token;
__le16 ba_param_set; /* ieee80211_ba_parameterset as it received */
__le16 ba_timeout;
@@ -1055,6 +1143,7 @@ struct wmi_data_port_open_event {
u8 reserved[3];
} __packed;
+
/*
* WMI_GET_PCP_CHANNEL_EVENTID
*/
@@ -1063,6 +1152,54 @@ struct wmi_get_pcp_channel_event {
u8 reserved[3];
} __packed;
+
+/*
+* WMI_PORT_ALLOCATED_EVENTID
+*/
+struct wmi_port_allocated_event {
+ u8 status; /* wmi_fw_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+* WMI_PORT_DELETED_EVENTID
+*/
+struct wmi_port_deleted_event {
+ u8 status; /* wmi_fw_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_LISTEN_STARTED_EVENTID
+ */
+struct wmi_listen_started_event {
+ u8 status; /* wmi_fw_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_SEARCH_STARTED_EVENTID
+ */
+struct wmi_search_started_event {
+ u8 status; /* wmi_fw_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_PCP_STARTED_EVENTID
+ */
+struct wmi_pcp_started_event {
+ u8 status; /* wmi_fw_status */
+ u8 reserved[3];
+} __packed;
+
+/*
+ * WMI_PCP_FACTOR_EVENTID
+ */
+struct wmi_pcp_factor_event {
+ __le32 pcp_factor;
+} __packed;
+
/*
* WMI_SW_TX_COMPLETE_EVENTID
*/
@@ -1078,6 +1215,23 @@ struct wmi_sw_tx_complete_event {
} __packed;
/*
+ * WMI_CORR_MEASURE_EVENTID
+ */
+struct wmi_corr_measure_event {
+ s32 i;
+ s32 q;
+ s32 image_i;
+ s32 image_q;
+} __packed;
+
+/*
+ * WMI_READ_RSSI_EVENTID
+ */
+struct wmi_read_rssi_event {
+ __le32 ina_rssi_adc_dbm;
+} __packed;
+
+/*
* WMI_GET_SSID_EVENTID
*/
struct wmi_get_ssid_event {
@@ -1091,7 +1245,8 @@ struct wmi_get_ssid_event {
struct wmi_rx_mgmt_info {
u8 mcs;
s8 snr;
- __le16 range;
+ u8 range;
+ u8 sqi;
__le16 stype;
__le16 status;
__le32 len;
@@ -1113,4 +1268,14 @@ struct wmi_echo_event {
__le32 echoed_value;
} __packed;
+/*
+ * WMI_TEMP_SENSE_DONE_EVENTID
+ *
+ * Measure MAC and radio temperatures
+ */
+struct wmi_temp_sense_done_event {
+ __le32 marlon_m_t1000;
+ __le32 marlon_r_t1000;
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 14/14] wil6210: temperature measurement
2013-03-13 12:12 [PATCH 00/14] wil6210 patch set for 3.10 Vladimir Kondratiev
` (12 preceding siblings ...)
2013-03-13 12:12 ` [PATCH 13/14] wil6210: sync with new firmware Vladimir Kondratiev
@ 2013-03-13 12:12 ` Vladimir Kondratiev
2013-03-13 18:29 ` John W. Linville
13 siblings, 1 reply; 16+ messages in thread
From: Vladimir Kondratiev @ 2013-03-13 12:12 UTC (permalink / raw)
To: John W . Linville
Cc: Vladimir Kondratiev, Johannes Berg, linux-wireless,
Luis R . Rodriguez
Firmware got support for temperature measurement.
There are 2 temperature sensors: MAC and radio
"not available" temperature - reported by FW as 0 or ~0
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Conflicts:
drivers/net/wireless/ath/wil6210/wil6210.h
---
drivers/net/wireless/ath/wil6210/debugfs.c | 44 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
drivers/net/wireless/ath/wil6210/wmi.c | 25 ++++++++++++++++
3 files changed, 70 insertions(+)
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 1e709bf..4be07f5 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -521,6 +521,49 @@ static const struct file_operations fops_ssid = {
.open = simple_open,
};
+/*---------temp------------*/
+static void print_temp(struct seq_file *s, const char *prefix, u32 t)
+{
+ switch (t) {
+ case 0:
+ case ~(u32)0:
+ seq_printf(s, "%s N/A\n", prefix);
+ break;
+ default:
+ seq_printf(s, "%s %d.%03d\n", prefix, t / 1000, t % 1000);
+ break;
+ }
+}
+
+static int wil_temp_debugfs_show(struct seq_file *s, void *data)
+{
+ struct wil6210_priv *wil = s->private;
+ u32 t_m, t_r;
+
+ int rc = wmi_get_temperature(wil, &t_m, &t_r);
+ if (rc) {
+ seq_printf(s, "Failed\n");
+ return 0;
+ }
+
+ print_temp(s, "MAC temperature :", t_m);
+ print_temp(s, "Radio temperature :", t_r);
+
+ return 0;
+}
+
+static int wil_temp_seq_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wil_temp_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations fops_temp = {
+ .open = wil_temp_seq_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek,
+};
+
/*----------------*/
int wil6210_debugfs_init(struct wil6210_priv *wil)
{
@@ -555,6 +598,7 @@ int wil6210_debugfs_init(struct wil6210_priv *wil)
debugfs_create_file("mem_val", S_IRUGO, dbg, wil, &fops_memread);
debugfs_create_file("reset", S_IWUSR, dbg, wil, &fops_reset);
+ debugfs_create_file("temp", S_IRUGO, dbg, wil, &fops_temp);
wil->rgf_blob.data = (void * __force)wil->csr + 0;
wil->rgf_blob.size = 0xa000;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 3bbd86d..8f76ecd 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -329,6 +329,7 @@ int wmi_echo(struct wil6210_priv *wil);
int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
+int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r);
int wil6210_init_irq(struct wil6210_priv *wil, int irq);
void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 706ee9d..45b04e3 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -962,6 +962,31 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
return rc;
}
+int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r)
+{
+ int rc;
+ struct wmi_temp_sense_cmd cmd = {
+ .measure_marlon_m_en = cpu_to_le32(!!t_m),
+ .measure_marlon_r_en = cpu_to_le32(!!t_r),
+ };
+ struct {
+ struct wil6210_mbox_hdr_wmi wmi;
+ struct wmi_temp_sense_done_event evt;
+ } __packed reply;
+
+ rc = wmi_call(wil, WMI_TEMP_SENSE_CMDID, &cmd, sizeof(cmd),
+ WMI_TEMP_SENSE_DONE_EVENTID, &reply, sizeof(reply), 100);
+ if (rc)
+ return rc;
+
+ if (t_m)
+ *t_m = le32_to_cpu(reply.evt.marlon_m_t1000);
+ if (t_r)
+ *t_r = le32_to_cpu(reply.evt.marlon_r_t1000);
+
+ return 0;
+}
+
void wmi_event_flush(struct wil6210_priv *wil)
{
struct pending_wmi_event *evt, *t;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH 14/14] wil6210: temperature measurement
2013-03-13 12:12 ` [PATCH 14/14] wil6210: temperature measurement Vladimir Kondratiev
@ 2013-03-13 18:29 ` John W. Linville
0 siblings, 0 replies; 16+ messages in thread
From: John W. Linville @ 2013-03-13 18:29 UTC (permalink / raw)
To: Vladimir Kondratiev; +Cc: Johannes Berg, linux-wireless, Luis R . Rodriguez
On Wed, Mar 13, 2013 at 02:12:51PM +0200, Vladimir Kondratiev wrote:
> Firmware got support for temperature measurement.
> There are 2 temperature sensors: MAC and radio
>
> "not available" temperature - reported by FW as 0 or ~0
>
> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
>
> Conflicts:
> drivers/net/wireless/ath/wil6210/wil6210.h
I edited-out the Conflicts bit -- not sure how/why that got into your
patch posting...
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 16+ messages in thread