Re: Brcmsmac driver woes, possible regression?

[Camaleón <noelamac@gmail.com>]

El 2013-03-19 a las 12:59 -0500, Dan Williams escribió:

> On Tue, 2013-03-19 at 18:30 +0100, Camaleón wrote:
> > El 2013-03-19 a las 11:53 -0500, Dan Williams escribió:
> > > 
> > > Note that NM 0.9.8 won't ask for a password when just anything fails,
> > > but will ask for a password if the 4-way handshake fails, because if
> > > that fails, it's probably your password.  We're contemplating getting
> > > rid of that too, and just notifying the user that their password may be
> > > wrong and that they should go update it in the network configuration
> > > panel so we don't interrupt.  But if you're 100% sure your PSK is
> > > correct, then it is, most likely, a driver bug.
> > 
> > Password is correct. I have a second wireless card (external, using 
> > rt2800usb driver) that connects without a glitch to the same AP.
> > 
> > Moreover, unless I type the right password, N-M dialog does not allow 
> > me to click on the "Connect" button.
> 
> NM minimally verifies the PSK, which by 802.11 standards is between 8
> and 63 ASCII characters inclusive.  So you should be able to type
> anything you want within those constraints, but clearly only one is your
> real PSK.

Oops! Okay, so what user inputs is not "bullet-proof".

Anyway, this does not seem to be a problem of bad password. I was 
finally able to get connected to the AP as soon as I carry the nebook 
and put it next to the AP which is the problem I've always have had 
with this driver (brcmsmac).

As soon as I back to another room, N-M asks me again for the pass-key 
and disconnects.

Greetings,

-- 
Camaleón