From: Stanislaw Gruszka <sgruszka@redhat.com>
To: Pedro Francisco <pedrogfrancisco@gmail.com>
Cc: Tino Keitel <tino.keitel@tikei.de>,
ML linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: Power saving features for iwl4965
Date: Wed, 31 Jul 2013 14:08:50 +0200 [thread overview]
Message-ID: <20130731120848.GA31732@redhat.com> (raw)
In-Reply-To: <CAJZjf_y9fnkHLp4YPdYY2sVo4r4+hKJcZAebJmjVKCBh-0EUtA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1238 bytes --]
On Wed, Jul 17, 2013 at 12:48:30PM +0100, Pedro Francisco wrote:
> On Tue, Jul 16, 2013 at 11:27 AM, Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> >> I seem only to be able to trigger it with disable_hw_scan=0, I need
> >> further testing with disable_hw_scan=1 (I use disable_hw_scan=0
> >> because it prevents me from getting disconnected from eduroam Cisco
> >> APs -- haven't tested disable_hw_scan=0 since the VOIP-friendly SW
> >> scanning patch, however).
> >>
> >> Do you want the log anyway? (modprobe iwl3945 debug=0x47ffffff
> >> disable_hw_scan=0 and runtime PCI powersave also enabled -- I don't
> >> know if it matters).
> >
> > As this is not causing troubles with default disable_hw_scan option,
> > I'll post that patch.
>
> My mistake, I can trigger error conditions _independently_ of
> disable_hw_scan option being enabled or disabled, as long as powersave
> is enabled.
>
> I'll send you a private email with the logs.
I think I found bug which couse this firmware crash. We have only 5
queues so updating write_ptr for txq[5] can cause random value write
to HBUS_TARG_WRPTR register. I also added spin_lock to do not abuse
writes we do in tx skb.
Please test attached patch (with powersave on :-)
Stanislaw
[-- Attachment #2: iwlegacy_fix_wakeup_interrupt.patch --]
[-- Type: text/plain, Size: 818 bytes --]
diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index b37a582..afa5c6e 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -1495,12 +1495,14 @@ il3945_irq_tasklet(struct il_priv *il)
if (inta & CSR_INT_BIT_WAKEUP) {
D_ISR("Wakeup interrupt\n");
il_rx_queue_update_write_ptr(il, &il->rxq);
+
+ spin_lock_irqsave(&il->lock, flags);
il_txq_update_write_ptr(il, &il->txq[0]);
il_txq_update_write_ptr(il, &il->txq[1]);
il_txq_update_write_ptr(il, &il->txq[2]);
il_txq_update_write_ptr(il, &il->txq[3]);
il_txq_update_write_ptr(il, &il->txq[4]);
- il_txq_update_write_ptr(il, &il->txq[5]);
+ spin_unlock_irqrestore(&il->lock, flags);
il->isr_stats.wakeup++;
handled |= CSR_INT_BIT_WAKEUP;
next prev parent reply other threads:[~2013-07-31 12:05 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 20:35 Power saving features for iwl4965 Tino Keitel
2012-04-19 14:25 ` Johannes Berg
2012-04-19 18:50 ` tino
2012-04-25 12:25 ` Stanislaw Gruszka
2012-05-03 18:28 ` Tino Keitel
2012-12-26 18:54 ` Tino Keitel
2013-01-07 11:08 ` Stanislaw Gruszka
2013-01-08 1:48 ` Pedro Francisco
2013-01-08 8:47 ` Stanislaw Gruszka
2013-06-03 8:52 ` Tino Keitel
2013-06-03 14:18 ` Stanislaw Gruszka
2013-06-09 0:28 ` Pedro Francisco
2013-06-10 19:31 ` Pedro Francisco
2013-06-11 16:19 ` Stanislaw Gruszka
2013-06-11 18:55 ` Tino Keitel
2013-06-14 12:50 ` Pedro Francisco
2013-06-14 13:18 ` Stanislaw Gruszka
2013-06-25 14:25 ` Stanislaw Gruszka
2013-07-11 21:02 ` Pedro Francisco
2013-07-16 10:27 ` Stanislaw Gruszka
2013-07-16 11:02 ` Pedro Francisco
2013-07-17 11:48 ` Pedro Francisco
2013-07-31 12:08 ` Stanislaw Gruszka [this message]
2013-08-04 14:24 ` Pedro Francisco
2013-08-04 14:53 ` Pedro Francisco
2013-10-17 9:06 ` Stanislaw Gruszka
2013-10-17 13:32 ` Stanislaw Gruszka
2013-06-11 18:51 ` Tino Keitel
2014-02-18 10:57 ` Stanislaw Gruszka
2014-02-18 11:32 ` Emmanuel Grumbach
2014-02-18 11:59 ` Stanislaw Gruszka
2014-02-20 12:08 ` Pedro Francisco
2014-02-25 16:16 ` Pedro Francisco
-- strict thread matches above, loose matches on Subject: below --
2012-10-01 16:06 Tino Keitel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130731120848.GA31732@redhat.com \
--to=sgruszka@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=pedrogfrancisco@gmail.com \
--cc=tino.keitel@tikei.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).