linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH-resend 0/9] ath5k/ath9k: respin/resend 5/10 MHz and CSA patches
@ 2013-08-14  6:01 Simon Wunderlich
  2013-08-14  6:01 ` [PATCH-resend 1/9] ath9k: always use SIFS times from OFDM for 5/10 MHz Simon Wunderlich
                   ` (9 more replies)
  0 siblings, 10 replies; 13+ messages in thread
From: Simon Wunderlich @ 2013-08-14  6:01 UTC (permalink / raw)
  To: linville; +Cc: linux-wireless, Simon Wunderlich

This series contains the rebased patches for 5/10 MHz and channel switch
announcement for ath5k/ath9k as sent in their respective series earlier. No
modification was made. Since Johannes picked the nl/cfg/mac80211 parts
only, these patches are still missing in the tree. John reported some
trouble building with these patches, but I couldn't see any problems here.

The series is based on wireless-testing of todays master. Please tell
me if there are any problems (including compiler errors and kernel config)
so I can rework if neccesary.

Thanks!
	Simon

Simon Wunderlich (9):
  ath9k: always use SIFS times from OFDM for 5/10 MHz
  ath9k: use chandef instead of channel_type
  ath9k: report 5/10 MHz channels
  ath9k: set 5/10 MHz supported channels and fix bitrate
  ath9k: announce that ath9k supports 5/10 MHz
  ath5k: report 5/10 MHz channels
  ath5k: set 5/10 MHz supported channels and fix duration
  ath5k: enable support for 5 MHz and 10 MHz channels
  ath9k: enable CSA functionality in ath9k

 drivers/net/wireless/ath/ath5k/ath5k.h        |    1 +
 drivers/net/wireless/ath/ath5k/base.c         |   59 ++++++++++++++++++----
 drivers/net/wireless/ath/ath5k/base.h         |    2 +-
 drivers/net/wireless/ath/ath5k/mac80211-ops.c |    2 +-
 drivers/net/wireless/ath/ath5k/pcu.c          |    2 +
 drivers/net/wireless/ath/ath5k/qcu.c          |   25 ++++++++-
 drivers/net/wireless/ath/ath9k/ath9k.h        |    2 +
 drivers/net/wireless/ath/ath9k/beacon.c       |   21 ++++++++
 drivers/net/wireless/ath/ath9k/common.c       |   67 +++++++++++++++----------
 drivers/net/wireless/ath/ath9k/common.h       |    3 +-
 drivers/net/wireless/ath/ath9k/htc_drv_main.c |    5 +-
 drivers/net/wireless/ath/ath9k/hw.c           |    5 +-
 drivers/net/wireless/ath/ath9k/init.c         |   30 +++++++----
 drivers/net/wireless/ath/ath9k/main.c         |   25 +++++++--
 drivers/net/wireless/ath/ath9k/rc.c           |    9 +++-
 drivers/net/wireless/ath/ath9k/recv.c         |   11 ++++
 drivers/net/wireless/ath/ath9k/xmit.c         |    2 +
 17 files changed, 206 insertions(+), 65 deletions(-)

-- 
1.7.10.4


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2013-08-16  8:46 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-14  6:01 [PATCH-resend 0/9] ath5k/ath9k: respin/resend 5/10 MHz and CSA patches Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 1/9] ath9k: always use SIFS times from OFDM for 5/10 MHz Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 2/9] ath9k: use chandef instead of channel_type Simon Wunderlich
2013-08-16  8:46   ` [PATCH-resend-v2 " Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 3/9] ath9k: report 5/10 MHz channels Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 4/9] ath9k: set 5/10 MHz supported channels and fix bitrate Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 5/9] ath9k: announce that ath9k supports 5/10 MHz Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 6/9] ath5k: report 5/10 MHz channels Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 7/9] ath5k: set 5/10 MHz supported channels and fix duration Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 8/9] ath5k: enable support for 5 MHz and 10 MHz channels Simon Wunderlich
2013-08-14  6:01 ` [PATCH-resend 9/9] ath9k: enable CSA functionality in ath9k Simon Wunderlich
2013-08-15 20:04 ` [PATCH-resend 0/9] ath5k/ath9k: respin/resend 5/10 MHz and CSA patches John W. Linville
2013-08-16  8:38   ` Simon Wunderlich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).