[PATCH 1/2] rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helper

[PATCH 1/2] rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helper

[Gabor Juhos]

The rt2800pci driver uses the same [RT]XWI size
for all chipsets, however some chips requires
different values.

The size of the [RT]XWI structures is a constant
value for a given chipset and it does not depend
on the underlying interface. Add a helper function
which returns the correct values for the actual
chipset and use the new helper both in the rt2800usb
and in the rt2800pci drivers. This ensures that both
drivers are using the correct values.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |   23 +++++++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800lib.h |    4 ++++
 drivers/net/wireless/rt2x00/rt2800pci.c |   11 ++++++++---
 drivers/net/wireless/rt2x00/rt2800usb.c |   11 +----------
 4 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index dedc3d4..313da6a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -521,6 +521,29 @@ void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2800_disable_wpdma);
 
+void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
+			       unsigned short *txwi_size,
+			       unsigned short *rxwi_size)
+{
+	switch (rt2x00dev->chip.rt) {
+	case RT3593:
+		*txwi_size = TXWI_DESC_SIZE_4WORDS;
+		*rxwi_size = RXWI_DESC_SIZE_5WORDS;
+		break;
+
+	case RT5592:
+		*txwi_size = TXWI_DESC_SIZE_5WORDS;
+		*rxwi_size = RXWI_DESC_SIZE_6WORDS;
+		break;
+
+	default:
+		*txwi_size = TXWI_DESC_SIZE_4WORDS;
+		*rxwi_size = RXWI_DESC_SIZE_4WORDS;
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size);
+
 static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
 {
 	u16 fw_crc;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 6ec7394..a94ba44 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -226,4 +226,8 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
 		      struct survey_info *survey);
 void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev);
 
+void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
+			       unsigned short *txwi_size,
+			       unsigned short *rxwi_size);
+
 #endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 1f6a4e3..e470fdb 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1223,12 +1223,17 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 
 static void rt2800pci_queue_init(struct data_queue *queue)
 {
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	unsigned short txwi_size, rxwi_size;
+
+	rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
+
 	switch (queue->qid) {
 	case QID_RX:
 		queue->limit = 128;
 		queue->data_size = AGGREGATION_SIZE;
 		queue->desc_size = RXD_DESC_SIZE;
-		queue->winfo_size = RXWI_DESC_SIZE_4WORDS;
+		queue->winfo_size = rxwi_size;
 		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
 		break;
 
@@ -1239,7 +1244,7 @@ static void rt2800pci_queue_init(struct data_queue *queue)
 		queue->limit = 64;
 		queue->data_size = AGGREGATION_SIZE;
 		queue->desc_size = TXD_DESC_SIZE;
-		queue->winfo_size = TXWI_DESC_SIZE_4WORDS;
+		queue->winfo_size = txwi_size;
 		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
 		break;
 
@@ -1247,7 +1252,7 @@ static void rt2800pci_queue_init(struct data_queue *queue)
 		queue->limit = 8;
 		queue->data_size = 0; /* No DMA required for beacons */
 		queue->desc_size = TXD_DESC_SIZE;
-		queue->winfo_size = TXWI_DESC_SIZE_4WORDS;
+		queue->winfo_size = txwi_size;
 		queue->priv_size = sizeof(struct queue_entry_priv_mmio);
 		break;
 
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index fc9efdf..338034e 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -854,16 +854,7 @@ static void rt2800usb_queue_init(struct data_queue *queue)
 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
 	unsigned short txwi_size, rxwi_size;
 
-	if (rt2x00_rt(rt2x00dev, RT3593)) {
-		txwi_size = TXWI_DESC_SIZE_4WORDS;
-		rxwi_size = RXWI_DESC_SIZE_5WORDS;
-	} else if (rt2x00_rt(rt2x00dev, RT5592)) {
-		txwi_size = TXWI_DESC_SIZE_5WORDS;
-		rxwi_size = RXWI_DESC_SIZE_6WORDS;
-	} else {
-		txwi_size = TXWI_DESC_SIZE_4WORDS;
-		rxwi_size = RXWI_DESC_SIZE_4WORDS;
-	}
+	rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
 
 	switch (queue->qid) {
 	case QID_RX:
-- 
1.7.10

[PATCH 2/2] rt2x00: rt2800pci: fix AUX_CTRL register setup for RT3090/3390/3593/5592

[Gabor Juhos]

The 2011_1007_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO
driver enables PCIe wakeup for these chips as well.
Do the same in rt2x00.

References:
  rt28xx_init in common/rtmp_init_intf.c
  RTMPInitPCIeLinkCtrlValue in os/linux/rt_rbus_pci_drv.c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 drivers/net/wireless/rt2x00/rt2800pci.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index e470fdb..182205b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -537,9 +537,13 @@ static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
 
 	if (rt2x00_is_pcie(rt2x00dev) &&
-	    (rt2x00_rt(rt2x00dev, RT3572) ||
+	    (rt2x00_rt(rt2x00dev, RT3090) ||
+	     rt2x00_rt(rt2x00dev, RT3390) ||
+	     rt2x00_rt(rt2x00dev, RT3572) ||
+	     rt2x00_rt(rt2x00dev, RT3593) ||
 	     rt2x00_rt(rt2x00dev, RT5390) ||
-	     rt2x00_rt(rt2x00dev, RT5392))) {
+	     rt2x00_rt(rt2x00dev, RT5392) ||
+	     rt2x00_rt(rt2x00dev, RT5592))) {
 		rt2x00mmio_register_read(rt2x00dev, AUX_CTRL, &reg);
 		rt2x00_set_field32(&reg, AUX_CTRL_FORCE_PCIE_CLK, 1);
 		rt2x00_set_field32(&reg, AUX_CTRL_WAKE_PCIE_EN, 1);
-- 
1.7.10

Re: [rt2x00-users] [PATCH 1/2] rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helper

[Stanislaw Gruszka]

On Fri, Aug 16, 2013 at 10:23:29AM +0200, Gabor Juhos wrote:
> The rt2800pci driver uses the same [RT]XWI size
> for all chipsets, however some chips requires
> different values.
> 
> The size of the [RT]XWI structures is a constant
> value for a given chipset and it does not depend
> on the underlying interface. Add a helper function
> which returns the correct values for the actual
> chipset and use the new helper both in the rt2800usb
> and in the rt2800pci drivers. This ensures that both
> drivers are using the correct values.
> 
> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>

Re: [rt2x00-users] [PATCH 2/2] rt2x00: rt2800pci: fix AUX_CTRL register setup for RT3090/3390/3593/5592

[Stanislaw Gruszka]

On Fri, Aug 16, 2013 at 10:23:30AM +0200, Gabor Juhos wrote:
> The 2011_1007_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO
> driver enables PCIe wakeup for these chips as well.
> Do the same in rt2x00.
> 
> References:
>   rt28xx_init in common/rtmp_init_intf.c
>   RTMPInitPCIeLinkCtrlValue in os/linux/rt_rbus_pci_drv.c
> 
> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>