* [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446
@ 2013-09-02 10:23 Fengguang Wu
2013-09-16 9:15 ` Arend van Spriel
0 siblings, 1 reply; 5+ messages in thread
From: Fengguang Wu @ 2013-09-02 10:23 UTC (permalink / raw)
To: fengguang.wu, Hante Meuleman
Cc: John W. Linville, linux-kernel, linux-wireless,
brcm80211-dev-list
[-- Attachment #1: Type: text/plain, Size: 6341 bytes --]
Greetings,
I got the below dmesg and the first bad commit is
commit 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b
Author: Hante Meuleman <meuleman@broadcom.com>
Date: Fri Apr 12 10:55:55 2013 +0200
brcmfmac: define and use platform specific data for SDIO.
This patch adds support for platform specific data for SDIO
fullmac devices. Currently OOB interrupts are configured by Kconfig
BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking
availibility of platform data.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[ 48.966342] Switched to clocksource tsc
[ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446
[ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163
[ 48.970957] Oops: 0011 [#1]
[ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23
[ 48.970957] Workqueue: events brcmf_driver_init
[ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000
[ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286
[ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000
[ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0
[ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002
[ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0
[ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300
[ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000
[ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0
[ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
[ 48.970957] Stack:
[ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9
[ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8
[ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000
[ 48.970957] Call Trace:
[ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70
[ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10
[ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480
[ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480
[ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0
[ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480
[ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0
[ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP <ffff8800001d5d40>
[ 48.970957] CR2: ffffffff82196446
[ 48.970957] ---[ end trace 62980817cd525f14 ]---
git bisect start v3.10 v3.9 --
git bisect bad 20b4fb485227404329e41ad15588afad3df23050 # 12:16 9- Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
git bisect good 19b344efa35dbc253e2d10403dafe6aafda73c56 # 17:54 800+ Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
git bisect bad 20074f357da4a637430aec2879c9d864c5d2c23c # 18:03 1- filter: fix va_list build error
git bisect good 953c96e0d85615d1ab1f100e525d376053294dc2 # 21:38 800+ tg3: Use bool not int
git bisect bad 4de41bef3e075dbc787f7c53b3562f23295f1d6d # 22:21 102- wil6210: Use cached copy of Tx descriptor
git bisect good e73dcfbf061b524fe9aaef56cf3c2e234a45ec19 # 01:19 800+ Bluetooth: hidp: fix sending output reports on intr channel
git bisect good c79490e1b5ebf35415147fe06f02d8e77ccfe6d4 # 07:18 800+ NFC: pn533: Avoid function declarations
git bisect bad 06d961a8e210035bff7e82f466107f9ab4a8fd94 # 07:49 55- mac80211/minstrel: use the new rate control API
git bisect good 97990a060e6757f48b931a3946b17c1c4362c3fb # 10:43 800+ nl80211: allow using wdev identifiers to get scan results
git bisect bad 31ed07dc1e83b7926ce8ee2215ea21599a215990 # 11:15 77- brcmfmac: remove ifidx variable from brcmf_fws_process_skb()
git bisect good 1e9ab4dd258ecbb0f1c377fd4dbe227cdb93d9bd # 14:16 800+ brcmfmac: setup SDIO reset behavior
git bisect bad 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b # 15:03 38- brcmfmac: define and use platform specific data for SDIO.
git bisect good 369508c5656db290f09b32d213effeea6c1431b8 # 18:30 800+ brcmfmac: Add 43143 SDIO support.
git bisect good 979c29205ffa607c59ba2c9f9c083b967d356c97 # 19:54 800+ brcmfmac: Add drive strength programming for SDIO 43143.
git bisect good 979c29205ffa607c59ba2c9f9c083b967d356c97 # 05:19 2400+ brcmfmac: Add drive strength programming for SDIO 43143.
git bisect bad c52dd7f94c5d5386413cb95462ac802847fa5f3a # 05:20 0- Merge remote-tracking branch 'sound/for-linus' into devel-cairo-x86_64-201308281454
git bisect bad d9eda0fae1394ea1e1c59c94d4a120ad9c06e64a # 11:50 27- Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
git bisect bad 797c8d18e6804f054e68555e6cf827827b6a073c # 12:47 1- Add linux-next specific files for 20130830
Thanks,
Fengguang
[-- Attachment #2: dmesg-kvm-ant-9274-20130828152722-3.11.0-rc7-00444-gc52dd7f-23 --]
[-- Type: text/plain, Size: 55966 bytes --]
[ 0.000000] Linux version 3.11.0-rc7-00444-gc52dd7f (kbuild@cairo) (gcc version 4.8.1 (Debian 4.8.1-8) ) #23 Wed Aug 28 15:18:19 CST 2013
[ 0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c3-0828/devel-cairo-x86_64-201308281454/.vmlinuz-c52dd7f94c5d5386413cb95462ac802847fa5f3a-20130828151901-4-ant branch=linux-devel/devel-cairo-x86_64-201308281454 noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-c3-0828/c52dd7f94c5d5386413cb95462ac802847fa5f3a/vmlinuz-3.11.0-rc7-00444-gc52dd7f
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Centaur CentaurHauls
[ 0.000000] CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000fdab0-0x000fdabf] mapped at [ffff8800000fdab0]
[ 0.000000] mpc: fdac0-fdbe4
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02bc5000, 0x02bc5fff] PGTABLE
[ 0.000000] BRK [0x02bc6000, 0x02bc6fff] PGTABLE
[ 0.000000] BRK [0x02bc7000, 0x02bc7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[ 0.000000] [mem 0x0e600000-0x0e7fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[ 0.000000] [mem 0x0c000000-0x0e5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[ 0.000000] [mem 0x0e800000-0x0fdfffff] page 2M
[ 0.000000] [mem 0x0fe00000-0x0fffdfff] page 4k
[ 0.000000] BRK [0x02bc8000, 0x02bc8fff] PGTABLE
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 127916(97%)
[ 0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 00000000000fd920 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000000fffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000000fffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 000000000fffff40 00040
[ 0.000000] ACPI: SSDT 000000000ffff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000000ffff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000000ffff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x00001000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] DMA32 zone: 896 pages used for memmap
[ 0.000000] DMA32 zone: 21 pages reserved
[ 0.000000] DMA32 zone: 65436 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] mpc: fdac0-fdbe4
[ 0.000000] MPTABLE: OEM ID: BOCHSCPU
[ 0.000000] MPTABLE: Product ID: 0.1
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] Bus #0 is PCI
[ 0.000000] Bus #1 is ISA
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 09
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0b
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 10, APIC ID 0, APIC INT 0b
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 14, APIC ID 0, APIC INT 0a
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 18, APIC ID 0, APIC INT 0a
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 1c, APIC ID 0, APIC INT 0b
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 20, APIC ID 0, APIC INT 0b
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 24, APIC ID 0, APIC INT 0a
[ 0.000000] Int: type 0, pol 1, trig 0, bus 00, IRQ 28, APIC ID 0, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 01, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Lint: type 3, pol 0, trig 0, bus 01, IRQ 00, APIC ID 0, APIC LINT 00
[ 0.000000] Lint: type 1, pol 0, trig 0, bus 01, IRQ 00, APIC ID ff, APIC LINT 01
[ 0.000000] Processors: 1
[ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000)
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x10000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64519
[ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c3-0828/devel-cairo-x86_64-201308281454/.vmlinuz-c52dd7f94c5d5386413cb95462ac802847fa5f3a-20130828151901-4-ant branch=linux-devel/devel-cairo-x86_64-201308281454 noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-c3-0828/c52dd7f94c5d5386413cb95462ac802847fa5f3a/vmlinuz-3.11.0-rc7-00444-gc52dd7f
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] Memory: 197308K/261744K available (10666K kernel code, 3112K rwdata, 4076K rodata, 692K init, 9872K bss, 64436K reserved)
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6335 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ODEBUG: 6 of 6 active objects replaced
[ 0.000000] ODEBUG: selftest passed
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 3192.026 MHz processor
[ 0.040865] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.05 BogoMIPS (lpj=12768104)
[ 0.045259] pid_max: default: 32768 minimum: 301
[ 0.051443] Mount-cache hash table entries: 256
[ 0.091557] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.091557] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.091557] tlb_flushall_shift: -1
[ 0.092312] CPU: AuthenticAMD QEMU Virtual CPU version 1.5.0 (fam: 06, model: 02, stepping: 03)
[ 0.122991] ACPI: Core revision 20130517
[ 0.393582] ACPI: All ACPI Tables successfully acquired
[ 0.394940] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.425865] Performance Events:
[ 0.452314] Apic disabled
[ 0.456645] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.502333] xor: measuring software checksum speed
[ 0.548394] prefetch64-sse: 276.000 MB/sec
[ 0.588173] generic_sse: 276.000 MB/sec
[ 0.588740] xor: using function: generic_sse (276.000 MB/sec)
[ 0.614678] regulator-dummy: no parameters
[ 0.624832] NET: Registered protocol family 16
[ 0.661425] ACPI: bus type PCI registered
[ 0.666914] PCI: Using configuration type 1 for base access
[ 1.050789] bio: create slab <bio-0> at 0
[ 1.136615] raid6: sse2x1 63 MB/s
[ 1.208782] raid6: sse2x2 48 MB/s
[ 1.280361] raid6: sse2x4 44 MB/s
[ 1.280930] raid6: using algorithm sse2x1 (63 MB/s)
[ 1.281610] raid6: using intx1 recovery algorithm
[ 1.305774] ACPI: Added _OSI(Module Device)
[ 1.306277] ACPI: Added _OSI(Processor Device)
[ 1.306705] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.307129] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.446959] ACPI: EC: Look up EC in DSDT
[ 1.977766] ACPI: Interpreter enabled
[ 1.979106] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[ 1.980915] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[ 1.986613] ACPI: (supports S0 S3 S4 S5)
[ 1.987382] ACPI: Using PIC for interrupt routing
[ 1.993825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.733718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.768750] PCI host bridge to bus 0000:00
[ 2.770282] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.771380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.772162] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.772806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.773374] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 2.777954] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 2.800438] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 2.808343] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 2.820290] pci 0000:00:01.1: reg 0x20: [io 0xc1e0-0xc1ef]
[ 2.839385] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 2.842421] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 2.843168] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 2.862388] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 2.866313] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 2.872266] pci 0000:00:02.0: reg 0x14: [mem 0xfebe0000-0xfebe0fff]
[ 2.896253] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 2.908284] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 2.912246] pci 0000:00:03.0: reg 0x10: [io 0xc1c0-0xc1df]
[ 2.918023] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 2.938107] pci 0000:00:03.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 2.954150] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 2.958073] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 2.964200] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 2.984245] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 3.005403] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 3.010185] pci 0000:00:05.0: reg 0x10: [io 0xc040-0xc07f]
[ 3.014046] pci 0000:00:05.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 3.050516] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000
[ 3.056209] pci 0000:00:06.0: reg 0x10: [io 0xc080-0xc0bf]
[ 3.060212] pci 0000:00:06.0: reg 0x14: [mem 0xfebe3000-0xfebe3fff]
[ 3.101167] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
[ 3.106181] pci 0000:00:07.0: reg 0x10: [io 0xc0c0-0xc0ff]
[ 3.112258] pci 0000:00:07.0: reg 0x14: [mem 0xfebe4000-0xfebe4fff]
[ 3.152223] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000
[ 3.156275] pci 0000:00:08.0: reg 0x10: [io 0xc100-0xc13f]
[ 3.161995] pci 0000:00:08.0: reg 0x14: [mem 0xfebe5000-0xfebe5fff]
[ 3.202190] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000
[ 3.206068] pci 0000:00:09.0: reg 0x10: [io 0xc140-0xc17f]
[ 3.212197] pci 0000:00:09.0: reg 0x14: [mem 0xfebe6000-0xfebe6fff]
[ 3.253827] pci 0000:00:0a.0: [1af4:1001] type 00 class 0x010000
[ 3.258133] pci 0000:00:0a.0: reg 0x10: [io 0xc180-0xc1bf]
[ 3.264273] pci 0000:00:0a.0: reg 0x14: [mem 0xfebe7000-0xfebe7fff]
[ 3.301872] pci 0000:00:0b.0: [8086:25ab] type 00 class 0x088000
[ 3.305255] pci 0000:00:0b.0: reg 0x10: [mem 0xfebe8000-0xfebe800f]
[ 3.336382] pci_bus 0000:00: on NUMA node 0
[ 3.337174] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 3.393671] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 3.406408] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 3.417195] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 3.428327] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 3.433390] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 3.475207] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 3.477109] ACPI: \_SB_.PCI0: notify handler is installed
[ 3.482107] Found 1 acpi root devices
[ 3.521478] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.522614] vgaarb: loaded
[ 3.523031] vgaarb: bridge control possible 0000:00:02.0
[ 3.530059] tps65010: version 2 May 2005
[ 3.566484] tps65010: no chip?
[ 3.589352] SCSI subsystem initialized
[ 3.590243] ACPI: bus type ATA registered
[ 3.594443] libata version 3.00 loaded.
[ 3.601768] media: Linux media interface: v0.10
[ 3.603557] Linux video capture interface: v2.00
[ 3.608594] pps_core: LinuxPPS API ver. 1 registered
[ 3.609246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.610851] PTP clock support registered
[ 3.616650] EDAC MC: Ver: 3.0.0
[ 3.637542] Advanced Linux Sound Architecture Driver Initialized.
[ 3.638238] PCI: Using ACPI for IRQ routing
[ 3.639169] PCI: pci_cache_line_size set to 64 bytes
[ 3.642963] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 3.644839] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 3.698966] NET: Registered protocol family 23
[ 3.702170] NET: Registered protocol family 8
[ 3.704299] NET: Registered protocol family 20
[ 3.731345] cfg80211: Calling CRDA to update world regulatory domain
[ 3.773571] Switched to clocksource hpet
[ 3.776000] FS-Cache: Loaded
[ 3.776000] pnp: PnP ACPI init
[ 3.776000] ACPI: bus type PNP registered
[ 3.832897] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.838511] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.860343] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 3.873476] pnp 00:03: [dma 2]
[ 3.891057] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 3.910630] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 3.918024] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.974434] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 4.012167] pnp: PnP ACPI: found 7 devices
[ 4.012958] ACPI: bus type PNP unregistered
[ 4.080538] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 4.081297] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 4.081956] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.083115] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 4.084530] NET: Registered protocol family 1
[ 4.085446] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 4.086251] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 4.100585] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 4.101801] pci 0000:00:02.0: Boot video device
[ 4.103454] PCI: CLS 0 bytes, default 64
[ 4.145245] Trying to unpack rootfs image as initramfs...
[ 34.195346] [sched_delayed] sched: RT throttling activated
[ 42.499381] Freeing initrd memory: 23656K (ffff88000e8d6000 - ffff88000fff0000)
[ 44.077069] DMA-API: preallocated 65536 debug entries
[ 44.077757] DMA-API: debugging enabled by kernel config
[ 44.097022] Scanning for low memory corruption every 60 seconds
[ 44.115975] cryptomgr_test (18) used greatest stack depth: 7000 bytes left
[ 44.183775] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 44.184626] PCLMULQDQ-NI instructions are not detected.
[ 44.185317] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 44.186124] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[ 44.187382] AVX or AES-NI instructions are not detected.
[ 44.188086] AVX instructions are not detected.
[ 44.188687] AVX instructions are not detected.
[ 44.189280] AVX instructions are not detected.
[ 44.240391] Initializing RT-Tester: OK
[ 44.268286] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 44.280087] VFS: Disk quotas dquot_6.5.2
[ 44.281141] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 44.299210] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 44.327397] EFS: 1.0a - http://aeschi.ch.eu.org/efs/
[ 44.330090] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 44.331909] QNX4 filesystem 0.2.3 registered.
[ 44.332794] QNX6 filesystem 1.0.0 registered.
[ 44.333351] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[ 44.348187] NILFS version 2 loaded
[ 44.348794] BeFS version: 0.9.3
[ 44.349635] OCFS2 1.5.0
[ 44.360488] ocfs2 stack glue: unable to register sysctl
[ 44.361477] ocfs2: Registered cluster interface o2cb
[ 44.362190] OCFS2 DLMFS 1.5.0
[ 44.365764] OCFS2 User DLM kernel interface loaded
[ 44.366440] OCFS2 Node Manager 1.5.0
[ 44.460539] OCFS2 DLM 1.5.0
[ 44.467500] bio: create slab <bio-1> at 1
[ 44.476321] Btrfs loaded
[ 44.476776] btrfs: selftest: Running btrfs free space cache tests
[ 44.477720] btrfs: selftest: Running extent only tests
[ 44.483770] btrfs: selftest: Running bitmap only tests
[ 44.489306] btrfs: selftest: Running bitmap and extent tests
[ 44.493639] btrfs: selftest: Free space cache tests finished
[ 44.509802] GFS2 installed
[ 44.516283] msgmni has been set to 431
[ 44.621745] NET: Registered protocol family 38
[ 44.623929] async_tx: api initialized (async)
[ 44.624926] Key type asymmetric registered
[ 44.625733] Asymmetric key parser 'x509' registered
[ 44.627876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 44.629195] io scheduler noop registered
[ 44.629794] io scheduler deadline registered (default)
[ 44.716528] no IO addresses supplied
[ 44.721807] hgafb: HGA card not detected.
[ 44.723960] hgafb: probe of hgafb.0 failed with error -22
[ 44.753026] kworker/u2:0 (96) used greatest stack depth: 6592 bytes left
[ 44.761159] uvesafb: failed to execute /sbin/v86d
[ 44.761826] uvesafb: make sure that the v86d helper is installed and executable
[ 44.763471] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[ 44.764455] uvesafb: vbe_init() failed with -22
[ 44.765544] uvesafb: probe of uvesafb.0 failed with error -22
[ 44.769744] ipmi message handler version 39.2
[ 44.772175] IPMI System Interface driver.
[ 44.776833] ipmi_si: Adding default-specified kcs state machine
[ 44.777967] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 44.780654] ipmi_si: Interface detection failed
[ 44.783552] ipmi_si: Adding default-specified smic state machine
[ 44.784401] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 44.785865] ipmi_si: Interface detection failed
[ 44.787132] ipmi_si: Adding default-specified bt state machine
[ 44.787945] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 44.789754] ipmi_si: Interface detection failed
[ 44.795641] ipmi_si: Unable to find any System Interface(s)
[ 44.798000] IPMI Watchdog: driver initialized
[ 44.813226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 44.815269] ACPI: Power Button [PWRF]
[ 45.679728] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 45.713049] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 45.748053] Non-volatile memory driver v1.3
[ 45.765803] ppdev: user-space parallel port driver
[ 45.767546] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 45.780392] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[ 45.988747] brd: module loaded
[ 46.015402] nbd: registered device at major 43
[ 46.212461] lkdtm: No crash points registered, enable through debugfs
[ 46.243236] Uniform Multi-Platform E-IDE driver
[ 46.246280] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 46.248034] ide-gd driver 1.18
[ 46.249286] ide-cd driver 5.00
[ 46.261466] hp_sw: device handler registered
[ 46.262210] emc: device handler registered
[ 46.268763] SCSI Media Changer driver v0.25
[ 46.272567] osd: LOADED open-osd 0.2.1
[ 46.279919] HSI/SSI char device loaded
[ 46.308207] Floppy drive(s): fd0 is 1.44M
[ 46.314074] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 46.387582] libphy: Fixed MDIO Bus: probed
[ 46.404906] tun: Universal TUN/TAP device driver, 1.6
[ 46.405499] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 46.408911] arcnet loaded.
[ 46.409432] arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
[ 46.410235] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
[ 46.411529] arcnet: cap mode (`c') encapsulation support loaded.
[ 46.412654] arcnet: COM90xx chipset support
[ 46.744068] S3: No ARCnet cards found.
[ 46.745548] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[ 46.746268] E-mail me if you actually test this driver, please!
[ 46.747481] arc%d: No autoprobe for IO mapped cards; you must specify the base address!
[ 46.750271] arcnet: RIM I (entirely mem-mapped) support
[ 46.751440] E-mail me if you actually test the RIM I driver, please!
[ 46.752167] Given: node 00h, shmem 0h, irq 0
[ 46.752674] No autoprobe for RIM I; you must specify the shmem and irq!
[ 46.754095] YAM driver version 0.8 by F1OAT/F6FBB
[ 46.784442] AX.25: bpqether driver version 004
[ 46.785082] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 46.785082] baycom_ser_fdx: version 0.10
[ 46.821407] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 46.822121] hdlcdrv: version 0.8
[ 46.822546] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 46.822546] baycom_ser_hdx: version 0.10
[ 46.855930] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 46.855930] baycom_par: version 0.9
[ 46.897296] PPP generic driver version 2.4.2
[ 46.904769] PPP MPPE Compression module registered
[ 46.905435] NET: Registered protocol family 24
[ 46.908913] airo(): Probing for PCI adapters
[ 46.911151] airo(): Finished probing for PCI adapters
[ 46.913889] Broadcom 43xx driver loaded [ Features: PML ]
[ 46.915513] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 46.923090] libertas_sdio: Libertas SDIO driver
[ 46.923776] libertas_sdio: Copyright Pierre Ossman
[ 46.925562] libertas_spi: Libertas SPI driver
[ 46.936391] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 46.953601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 46.955703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 46.957344] parkbd: no such parport
[ 46.968986] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[ 47.017887] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 47.020816] evbug: Connected device: input1 (PC Speaker at isa0061/input0)
[ 47.037521] lirc_dev: IR Remote Control driver registered, major 247
[ 47.039342] IR RC5(x) protocol handler initialized
[ 47.039884] IR JVC protocol handler initialized
[ 47.040308] IR SANYO protocol handler initialized
[ 47.040798] IR LIRC bridge handler initialized
[ 47.042230] Driver for 1-wire Dallas network protocol.
[ 47.080638] applesmc: supported laptop not found!
[ 47.081332] applesmc: driver init failed (ret=-19)!
[ 47.117564] pc87360: PC8736x not detected, module not inserted
[ 47.137647] md: linear personality registered for level -1
[ 47.138456] md: raid0 personality registered for level 0
[ 47.139762] md: raid1 personality registered for level 1
[ 47.140347] md: raid6 personality registered for level 6
[ 47.140997] md: raid5 personality registered for level 5
[ 47.141568] md: raid4 personality registered for level 4
[ 47.142216] md: multipath personality registered for level -4
[ 47.143391] md: faulty personality registered for level -5
[ 47.144566] cpuidle: using governor ladder
[ 47.145176] cpuidle: using governor menu
[ 47.146569] sdhci: Secure Digital Host Controller Interface driver
[ 47.147781] sdhci: Copyright(c) Pierre Ossman
[ 47.148319] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 47.149020] wbsd: Copyright(c) Pierre Ossman
[ 47.151873] sdhci-pltfm: SDHCI platform and OF driver helper
[ 47.180167] hidraw: raw HID events driver (C) Jiri Kosina
[ 47.218080] lirc_serial lirc_serial.0: port 03f8 already in use
[ 47.219475] lirc_serial lirc_serial.0: use 'setserial /dev/ttySX uart none'
[ 47.220303] lirc_serial lirc_serial.0: or compile the serial port driver as module and
[ 47.221122] lirc_serial lirc_serial.0: make sure this module is loaded first
[ 47.222440] lirc_serial: probe of lirc_serial.0 failed with error -16
[ 47.227547] platform lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
[ 47.228441] lirc_zilog: Zilog/Hauppauge IR driver initializing
[ 47.230098] lirc_zilog: initialization complete
[ 47.231601] panel: driver version 0.9.5 not yet registered
[ 47.280819] zram: Created 1 device(s) ...
[ 47.284086] logger: created 256K log 'log_main'
[ 47.286043] logger: created 256K log 'log_events'
[ 47.288655] logger: created 256K log 'log_radio'
[ 47.291376] logger: created 256K log 'log_system'
[ 47.293147] hdaps: supported laptop not found!
[ 47.293669] hdaps: driver init failed (ret=-19)!
[ 47.568139] no UART detected at 0x1
[ 47.612819] NET: Registered protocol family 26
[ 47.614330] GACT probability NOT on
[ 47.615872] Mirror/redirect action on
[ 47.626253] netem: version 1.3
[ 47.627639] u32 classifier
[ 47.628006] Actions configured
[ 47.632440] NET: Registered protocol family 17
[ 47.640782] NET: Registered protocol family 5
[ 47.676136] NET: Registered protocol family 6
[ 47.762447] NET: Registered protocol family 11
[ 47.765364] NET: Registered protocol family 3
[ 47.766454] lec:lane_module_init: lec.c: initialized
[ 47.767490] lib80211: common routines for IEEE802.11 drivers
[ 47.768543] lib80211_crypt: registered algorithm 'NULL'
[ 47.770170] lib80211_crypt: registered algorithm 'WEP'
[ 47.771438] lib80211_crypt: registered algorithm 'CCMP'
[ 47.772119] lib80211_crypt: registered algorithm 'TKIP'
[ 47.775643] 9pnet: Installing 9P2000 support
[ 47.777374] NET: Registered protocol family 36
[ 47.792934] batman_adv: B.A.T.M.A.N. advanced 2013.3.0 (compatibility version 14) loaded
[ 47.793913] openvswitch: Open vSwitch switching datapath
[ 47.808716]
[ 47.808716] printing PIC contents
[ 47.810369] ... PIC IMR: edb8
[ 47.810948] ... PIC IRR: 0001
[ 47.811975] ... PIC ISR: 0000
[ 47.812400] ... PIC ELCR: 0200
[ 47.827773] registered taskstats version 1
[ 47.862183] cryptomgr_probe (100) used greatest stack depth: 6216 bytes left
[ 47.865793] Key type trusted registered
[ 47.876048] Key type encrypted registered
[ 47.896241] raid6test: testing the 4-disk case...
[ 47.904279] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 47.907217] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(P) OK
[ 47.908896] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(Q) OK
[ 47.912130] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(P) OK
[ 47.913293] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(Q) OK
[ 47.915321] raid6test: test_disks(2, 3): faila= 2(P) failb= 3(Q) OK
[ 47.918568] raid6test: testing the 5-disk case...
[ 47.923573] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 47.925335] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 47.927548] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(P) OK
[ 47.929971] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(Q) OK
[ 47.932285] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 47.933972] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(P) OK
[ 47.936051] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(Q) OK
[ 47.937728] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(P) OK
[ 47.940660] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(Q) OK
[ 47.942122] raid6test: test_disks(3, 4): faila= 3(P) failb= 4(Q) OK
[ 47.947752] raid6test: testing the 11-disk case...
[ 47.956333] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 47.958692] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 47.963263] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 47.965513] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 47.968339] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 47.972133] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 47.974326] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 47.977310] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 47.980880] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(P) OK
[ 47.983269] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(Q) OK
[ 47.985584] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 47.988597] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 47.992511] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 47.994417] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 47.997194] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 48.001119] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 48.003971] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 48.006181] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(P) OK
[ 48.010014] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(Q) OK
[ 48.012915] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 48.015366] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 48.017699] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 48.021349] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 48.024015] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 48.026278] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 48.029834] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(P) OK
[ 48.032926] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(Q) OK
[ 48.035064] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 48.035064] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 48.041422] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 48.044919] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 48.047949] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 48.051663] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(P) OK
[ 48.053804] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(Q) OK
[ 48.056604] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 48.060226] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 48.062538] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 48.065324] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 48.068061] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(P) OK
[ 48.071377] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(Q) OK
[ 48.073681] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 48.076637] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 48.080143] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 48.082385] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(P) OK
[ 48.085101] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(Q) OK
[ 48.087839] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 48.091358] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 48.093585] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(P) OK
[ 48.096302] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(Q) OK
[ 48.098796] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 48.102261] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(P) OK
[ 48.104864] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(Q) OK
[ 48.107732] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(P) OK
[ 48.110569] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(Q) OK
[ 48.113240] raid6test: test_disks(9, 10): faila= 9(P) failb= 10(Q) OK
[ 48.127567] raid6test: testing the 12-disk case...
[ 48.130817] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 48.133653] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 48.136663] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 48.140210] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 48.142795] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 48.145692] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 48.148593] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 48.152365] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 48.155165] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 48.157455] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(P) OK
[ 48.161371] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(Q) OK
[ 48.164324] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 48.167253] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 48.170332] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 48.173208] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 48.176240] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 48.178806] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 48.182297] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 48.185245] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 48.188106] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(P) OK
[ 48.191675] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(Q) OK
[ 48.194040] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 48.196927] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 48.200654] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 48.203480] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 48.205875] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 48.208759] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 48.212373] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 48.215232] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(P) OK
[ 48.217467] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(Q) OK
[ 48.220998] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 48.223919] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 48.226271] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 48.229802] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 48.232884] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 48.235704] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 48.237977] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(P) OK
[ 48.241698] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(Q) OK
[ 48.244628] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 48.247540] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 48.250796] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 48.253565] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 48.256587] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 48.260110] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(P) OK
[ 48.262353] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(Q) OK
[ 48.265320] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 48.268121] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 48.271901] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 48.274253] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 48.277111] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(P) OK
[ 48.280743] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(Q) OK
[ 48.283571] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 48.285937] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 48.289734] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 48.292600] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(P) OK
[ 48.295470] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(Q) OK
[ 48.297901] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 48.301581] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 48.304603] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(P) OK
[ 48.307411] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(Q) OK
[ 48.310275] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 48.312948] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(P) OK
[ 48.315117] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(Q) OK
[ 48.322103] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(P) OK
[ 48.324751] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(Q) OK
[ 48.327670] raid6test: test_disks(10, 11): faila= 10(P) failb= 11(Q) OK
[ 48.336174] raid6test: testing the 16-disk case...
[ 48.341133] raid6test: test_disks(0, 1): faila= 0(D) failb= 1(D) OK
[ 48.345115] raid6test: test_disks(0, 2): faila= 0(D) failb= 2(D) OK
[ 48.352994] raid6test: test_disks(0, 3): faila= 0(D) failb= 3(D) OK
[ 48.361017] raid6test: test_disks(0, 4): faila= 0(D) failb= 4(D) OK
[ 48.368053] raid6test: test_disks(0, 5): faila= 0(D) failb= 5(D) OK
[ 48.375922] raid6test: test_disks(0, 6): faila= 0(D) failb= 6(D) OK
[ 48.378506] raid6test: test_disks(0, 7): faila= 0(D) failb= 7(D) OK
[ 48.382380] raid6test: test_disks(0, 8): faila= 0(D) failb= 8(D) OK
[ 48.385644] raid6test: test_disks(0, 9): faila= 0(D) failb= 9(D) OK
[ 48.388857] raid6test: test_disks(0, 10): faila= 0(D) failb= 10(D) OK
[ 48.392422] raid6test: test_disks(0, 11): faila= 0(D) failb= 11(D) OK
[ 48.395404] raid6test: test_disks(0, 12): faila= 0(D) failb= 12(D) OK
[ 48.398040] raid6test: test_disks(0, 13): faila= 0(D) failb= 13(D) OK
[ 48.401870] raid6test: test_disks(0, 14): faila= 0(D) failb= 14(P) OK
[ 48.404709] raid6test: test_disks(0, 15): faila= 0(D) failb= 15(Q) OK
[ 48.407939] raid6test: test_disks(1, 2): faila= 1(D) failb= 2(D) OK
[ 48.411688] raid6test: test_disks(1, 3): faila= 1(D) failb= 3(D) OK
[ 48.414245] raid6test: test_disks(1, 4): faila= 1(D) failb= 4(D) OK
[ 48.417232] raid6test: test_disks(1, 5): faila= 1(D) failb= 5(D) OK
[ 48.420951] raid6test: test_disks(1, 6): faila= 1(D) failb= 6(D) OK
[ 48.423976] raid6test: test_disks(1, 7): faila= 1(D) failb= 7(D) OK
[ 48.426517] raid6test: test_disks(1, 8): faila= 1(D) failb= 8(D) OK
[ 48.430209] raid6test: test_disks(1, 9): faila= 1(D) failb= 9(D) OK
[ 48.433142] raid6test: test_disks(1, 10): faila= 1(D) failb= 10(D) OK
[ 48.436119] raid6test: test_disks(1, 11): faila= 1(D) failb= 11(D) OK
[ 48.439936] raid6test: test_disks(1, 12): faila= 1(D) failb= 12(D) OK
[ 48.442442] raid6test: test_disks(1, 13): faila= 1(D) failb= 13(D) OK
[ 48.445421] raid6test: test_disks(1, 14): faila= 1(D) failb= 14(P) OK
[ 48.448337] raid6test: test_disks(1, 15): faila= 1(D) failb= 15(Q) OK
[ 48.452238] raid6test: test_disks(2, 3): faila= 2(D) failb= 3(D) OK
[ 48.455142] raid6test: test_disks(2, 4): faila= 2(D) failb= 4(D) OK
[ 48.457730] raid6test: test_disks(2, 5): faila= 2(D) failb= 5(D) OK
[ 48.461587] raid6test: test_disks(2, 6): faila= 2(D) failb= 6(D) OK
[ 48.467737] raid6test: test_disks(2, 7): faila= 2(D) failb= 7(D) OK
[ 48.471344] raid6test: test_disks(2, 8): faila= 2(D) failb= 8(D) OK
[ 48.473941] raid6test: test_disks(2, 9): faila= 2(D) failb= 9(D) OK
[ 48.476910] raid6test: test_disks(2, 10): faila= 2(D) failb= 10(D) OK
[ 48.480572] raid6test: test_disks(2, 11): faila= 2(D) failb= 11(D) OK
[ 48.483582] raid6test: test_disks(2, 12): faila= 2(D) failb= 12(D) OK
[ 48.486057] raid6test: test_disks(2, 13): faila= 2(D) failb= 13(D) OK
[ 48.489680] raid6test: test_disks(2, 14): faila= 2(D) failb= 14(P) OK
[ 48.492546] raid6test: test_disks(2, 15): faila= 2(D) failb= 15(Q) OK
[ 48.495487] raid6test: test_disks(3, 4): faila= 3(D) failb= 4(D) OK
[ 48.498059] raid6test: test_disks(3, 5): faila= 3(D) failb= 5(D) OK
[ 48.502006] raid6test: test_disks(3, 6): faila= 3(D) failb= 6(D) OK
[ 48.505067] raid6test: test_disks(3, 7): faila= 3(D) failb= 7(D) OK
[ 48.508119] raid6test: test_disks(3, 8): faila= 3(D) failb= 8(D) OK
[ 48.511990] raid6test: test_disks(3, 9): faila= 3(D) failb= 9(D) OK
[ 48.514573] raid6test: test_disks(3, 10): faila= 3(D) failb= 10(D) OK
[ 48.517630] raid6test: test_disks(3, 11): faila= 3(D) failb= 11(D) OK
[ 48.521402] raid6test: test_disks(3, 12): faila= 3(D) failb= 12(D) OK
[ 48.524453] raid6test: test_disks(3, 13): faila= 3(D) failb= 13(D) OK
[ 48.527272] raid6test: test_disks(3, 14): faila= 3(D) failb= 14(P) OK
[ 48.530358] raid6test: test_disks(3, 15): faila= 3(D) failb= 15(Q) OK
[ 48.533378] raid6test: test_disks(4, 5): faila= 4(D) failb= 5(D) OK
[ 48.536166] raid6test: test_disks(4, 6): faila= 4(D) failb= 6(D) OK
[ 48.540446] raid6test: test_disks(4, 7): faila= 4(D) failb= 7(D) OK
[ 48.543809] raid6test: test_disks(4, 8): faila= 4(D) failb= 8(D) OK
[ 48.546761] raid6test: test_disks(4, 9): faila= 4(D) failb= 9(D) OK
[ 48.551004] raid6test: test_disks(4, 10): faila= 4(D) failb= 10(D) OK
[ 48.553875] raid6test: test_disks(4, 11): faila= 4(D) failb= 11(D) OK
[ 48.557241] raid6test: test_disks(4, 12): faila= 4(D) failb= 12(D) OK
[ 48.561220] raid6test: test_disks(4, 13): faila= 4(D) failb= 13(D) OK
[ 48.564493] raid6test: test_disks(4, 14): faila= 4(D) failb= 14(P) OK
[ 48.567650] raid6test: test_disks(4, 15): faila= 4(D) failb= 15(Q) OK
[ 48.571490] raid6test: test_disks(5, 6): faila= 5(D) failb= 6(D) OK
[ 48.574328] raid6test: test_disks(5, 7): faila= 5(D) failb= 7(D) OK
[ 48.577605] raid6test: test_disks(5, 8): faila= 5(D) failb= 8(D) OK
[ 48.581703] raid6test: test_disks(5, 9): faila= 5(D) failb= 9(D) OK
[ 48.584912] raid6test: test_disks(5, 10): faila= 5(D) failb= 10(D) OK
[ 48.588279] raid6test: test_disks(5, 11): faila= 5(D) failb= 11(D) OK
[ 48.592316] raid6test: test_disks(5, 12): faila= 5(D) failb= 12(D) OK
[ 48.595710] raid6test: test_disks(5, 13): faila= 5(D) failb= 13(D) OK
[ 48.598484] raid6test: test_disks(5, 14): faila= 5(D) failb= 14(P) OK
[ 48.602403] raid6test: test_disks(5, 15): faila= 5(D) failb= 15(Q) OK
[ 48.605695] raid6test: test_disks(6, 7): faila= 6(D) failb= 7(D) OK
[ 48.608924] raid6test: test_disks(6, 8): faila= 6(D) failb= 8(D) OK
[ 48.613266] raid6test: test_disks(6, 9): faila= 6(D) failb= 9(D) OK
[ 48.616179] raid6test: test_disks(6, 10): faila= 6(D) failb= 10(D) OK
[ 48.620582] raid6test: test_disks(6, 11): faila= 6(D) failb= 11(D) OK
[ 48.623806] raid6test: test_disks(6, 12): faila= 6(D) failb= 12(D) OK
[ 48.626755] raid6test: test_disks(6, 13): faila= 6(D) failb= 13(D) OK
[ 48.630536] raid6test: test_disks(6, 14): faila= 6(D) failb= 14(P) OK
[ 48.633696] raid6test: test_disks(6, 15): faila= 6(D) failb= 15(Q) OK
[ 48.637038] raid6test: test_disks(7, 8): faila= 7(D) failb= 8(D) OK
[ 48.640788] raid6test: test_disks(7, 9): faila= 7(D) failb= 9(D) OK
[ 48.643793] raid6test: test_disks(7, 10): faila= 7(D) failb= 10(D) OK
[ 48.646229] raid6test: test_disks(7, 11): faila= 7(D) failb= 11(D) OK
[ 48.649748] raid6test: test_disks(7, 12): faila= 7(D) failb= 12(D) OK
[ 48.652727] raid6test: test_disks(7, 13): faila= 7(D) failb= 13(D) OK
[ 48.655459] raid6test: test_disks(7, 14): faila= 7(D) failb= 14(P) OK
[ 48.657826] raid6test: test_disks(7, 15): faila= 7(D) failb= 15(Q) OK
[ 48.661757] raid6test: test_disks(8, 9): faila= 8(D) failb= 9(D) OK
[ 48.664564] raid6test: test_disks(8, 10): faila= 8(D) failb= 10(D) OK
[ 48.667426] raid6test: test_disks(8, 11): faila= 8(D) failb= 11(D) OK
[ 48.670506] raid6test: test_disks(8, 12): faila= 8(D) failb= 12(D) OK
[ 48.673460] raid6test: test_disks(8, 13): faila= 8(D) failb= 13(D) OK
[ 48.676298] raid6test: test_disks(8, 14): faila= 8(D) failb= 14(P) OK
[ 48.679725] raid6test: test_disks(8, 15): faila= 8(D) failb= 15(Q) OK
[ 48.682240] raid6test: test_disks(9, 10): faila= 9(D) failb= 10(D) OK
[ 48.685172] raid6test: test_disks(9, 11): faila= 9(D) failb= 11(D) OK
[ 48.688090] raid6test: test_disks(9, 12): faila= 9(D) failb= 12(D) OK
[ 48.691838] raid6test: test_disks(9, 13): faila= 9(D) failb= 13(D) OK
[ 48.694241] raid6test: test_disks(9, 14): faila= 9(D) failb= 14(P) OK
[ 48.697003] raid6test: test_disks(9, 15): faila= 9(D) failb= 15(Q) OK
[ 48.700849] raid6test: test_disks(10, 11): faila= 10(D) failb= 11(D) OK
[ 48.703847] raid6test: test_disks(10, 12): faila= 10(D) failb= 12(D) OK
[ 48.706295] raid6test: test_disks(10, 13): faila= 10(D) failb= 13(D) OK
[ 48.709886] raid6test: test_disks(10, 14): faila= 10(D) failb= 14(P) OK
[ 48.712760] raid6test: test_disks(10, 15): faila= 10(D) failb= 15(Q) OK
[ 48.715693] raid6test: test_disks(11, 12): faila= 11(D) failb= 12(D) OK
[ 48.718141] raid6test: test_disks(11, 13): faila= 11(D) failb= 13(D) OK
[ 48.721901] raid6test: test_disks(11, 14): faila= 11(D) failb= 14(P) OK
[ 48.724804] raid6test: test_disks(11, 15): faila= 11(D) failb= 15(Q) OK
[ 48.727643] raid6test: test_disks(12, 13): faila= 12(D) failb= 13(D) OK
[ 48.731510] raid6test: test_disks(12, 14): faila= 12(D) failb= 14(P) OK
[ 48.733966] raid6test: test_disks(12, 15): faila= 12(D) failb= 15(Q) OK
[ 48.736913] raid6test: test_disks(13, 14): faila= 13(D) failb= 14(P) OK
[ 48.740489] raid6test: test_disks(13, 15): faila= 13(D) failb= 15(Q) OK
[ 48.743170] raid6test: test_disks(14, 15): faila= 14(P) failb= 15(Q) OK
[ 48.743795] raid6test:
[ 48.744073] raid6test: complete (257 tests, 0 failures)
[ 48.783025] FDC 0 is a S82078B
[ 48.807053] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 48.816646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 48.817214] EDD information not available.
[ 48.824659] ALSA device list:
[ 48.825039] #0: Dummy 1
[ 48.825297] #1: Loopback 1
[ 48.825546] #2: Virtual MIDI Card 1
[ 48.963559] Freeing unused kernel memory: 692K (ffffffff82173000 - ffffffff82220000)
[ 48.966342] Switched to clocksource tsc
[ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446
[ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163
[ 48.970957] Oops: 0011 [#1]
[ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23
[ 48.970957] Workqueue: events brcmf_driver_init
[ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000
[ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286
[ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000
[ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0
[ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002
[ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0
[ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300
[ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000
[ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0
[ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
[ 48.970957] Stack:
[ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9
[ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8
[ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000
[ 48.970957] Call Trace:
[ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70
[ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10
[ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480
[ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480
[ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0
[ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480
[ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0
[ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP <ffff8800001d5d40>
[ 48.970957] CR2: ffffffff82196446
[ 48.970957] ---[ end trace 62980817cd525f14 ]---
[ 48.970957] Kernel panic - not syncing: Fatal exception
[ 48.970957] Rebooting in 10 seconds..
BUG: kernel boot crashed
Elapsed time: 75
qemu-system-x86_64 -kernel /tmp//kernel/x86_64-randconfig-c3-0828/c52dd7f94c5d5386413cb95462ac802847fa5f3a/vmlinuz-3.11.0-rc7-00444-gc52dd7f-9274 -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kernel-tests/run-queue/kvm/x86_64-randconfig-c3-0828/devel-cairo-x86_64-201308281454/.vmlinuz-c52dd7f94c5d5386413cb95462ac802847fa5f3a-20130828151901-4-ant branch=linux-devel/devel-cairo-x86_64-201308281454 noapic nolapic nohz=off BOOT_IMAGE=/kernel/x86_64-randconfig-c3-0828/c52dd7f94c5d5386413cb95462ac802847fa5f3a/vmlinuz-3.11.0-rc7-00444-gc52dd7f' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::13370-:22 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -drive file=/fs/sdc1/disk0-ant-9274,media=disk,if=virtio -drive file=/fs/sdc1/disk1-ant-9274,media=disk,if=virtio -drive file=/fs/sdc1/disk2-ant-9274,media=disk,if=virtio -drive file=/fs/sdc1/disk3-ant-9274,media=disk,if=virtio -drive file=/fs/sdc1/disk4-ant-9274,media=disk,if=virtio -drive file=/fs/sdc1/disk5-ant-9274,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-ant-lkp-9274 -serial file:/dev/shm/kboot/serial-ant-lkp-9274 -daemonize -display none -monitor null
[-- Attachment #3: bisect-c52dd7f94c5d5386413cb95462ac802847fa5f3a-x86_64-randconfig-c3-0828-BUG:-unable-to-handle-kernel-paging-request-at-121954.log --]
[-- Type: application/octet-stream, Size: 58152 bytes --]
[-- Attachment #4: config-3.11.0-rc7-00444-gc52dd7f --]
[-- Type: text/plain, Size: 81977 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.11.0-rc7 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
CONFIG_KERNEL_LZO=y
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
# CONFIG_TICK_CPU_ACCOUNTING is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_ZBUD is not set
# CONFIG_MEM_SOFT_DIRTY is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
# CONFIG_COREDUMP is not set
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_PHONET is not set
CONFIG_IEEE802154=y
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
# CONFIG_NET_SCH_FQ_CODEL is not set
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_OPENVSWITCH=y
CONFIG_VSOCKETS=y
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=y
# CONFIG_NET_MPLS_GSO is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
CONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not set
CONFIG_SMC_IRCC_FIR=y
CONFIG_ALI_FIR=y
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_MLME_DEBUG is not set
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_RFKILL_REGULATOR=y
CONFIG_NET_9P=y
# CONFIG_NET_9P_VIRTIO is not set
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=y
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
CONFIG_BMP085_SPI=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
# CONFIG_BCACHE is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
# CONFIG_NET_FC is not set
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
# CONFIG_NET_TEAM_MODE_ACTIVEBACKUP is not set
# CONFIG_NET_TEAM_MODE_LOADBALANCE is not set
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_ETHERNET is not set
# CONFIG_FDDI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM87XX_PHY is not set
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=y
CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOATM is not set
CONFIG_PPPOE=y
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
# CONFIG_PRISM54 is not set
# CONFIG_RTL8180 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_CARDS=y
CONFIG_ATH_DEBUG=y
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH6KL is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
CONFIG_B43=y
# CONFIG_B43_BCMA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_SDIO=y
# CONFIG_BRCM_TRACING is not set
# CONFIG_BRCMDBG is not set
CONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
CONFIG_HOSTAP_CS=y
# CONFIG_IPW2100 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_CS is not set
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_P54_COMMON=y
# CONFIG_P54_PCI is not set
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_RT2X00=y
# CONFIG_RT2400PCI is not set
# CONFIG_RT2500PCI is not set
# CONFIG_RT61PCI is not set
# CONFIG_RT2800PCI is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_WL_TI is not set
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
# CONFIG_MWIFIEX_PCIE is not set
# CONFIG_CW1200 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKEHARD is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC2005=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_ADXL34X_SPI is not set
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_ST33_I2C=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
# CONFIG_SPI_DW_PCI is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y
#
# HSI clients
#
CONFIG_HSI_CHAR=y
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_TS5500=y
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_LYNXPOINT is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_STMPE is not set
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_WM8350 is not set
# CONFIG_GPIO_WM8994 is not set
CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
# CONFIG_GPIO_MC33880 is not set
CONFIG_GPIO_74X164=y
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
#
# USB GPIO expanders:
#
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_BQ2415X=y
# CONFIG_CHARGER_SMB347 is not set
CONFIG_CHARGER_TPS65090=y
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=y
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_MC13783_ADC=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
CONFIG_MFD_MAX8998=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
CONFIG_STMPE_SPI=y
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
CONFIG_TPS65010=y
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_AB3100=y
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_V4L2_INT_DEVICE=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
# CONFIG_IR_NEC_DECODER is not set
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_RC5_SZ_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
#
# Supported MMC/SDIO adapters
#
# CONFIG_MEDIA_PARPORT_SUPPORT is not set
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_GOLDFISH is not set
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
# CONFIG_FB_AUO_K1901 is not set
CONFIG_EXYNOS_VIDEO=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
# CONFIG_SND_MTPAV is not set
CONFIG_SND_MTS64=y
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PRIMAX=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
#
# USB port drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_BLINKM=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_TIMB_DMA=y
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
CONFIG_ECHO=y
CONFIG_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_DX_SEP is not set
#
# IIO staging drivers
#
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
CONFIG_ADIS16203=y
CONFIG_ADIS16204=y
# CONFIG_ADIS16209 is not set
# CONFIG_ADIS16220 is not set
CONFIG_ADIS16240=y
CONFIG_LIS3L02DQ=y
CONFIG_SCA3000=y
#
# Analog to digital converters
#
CONFIG_AD7291=y
# CONFIG_AD7606 is not set
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
# CONFIG_AD7780 is not set
CONFIG_AD7816=y
CONFIG_AD7192=y
# CONFIG_AD7280 is not set
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7152=y
CONFIG_AD7746=y
#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
CONFIG_AD9832=y
CONFIG_AD9834=y
CONFIG_AD9850=y
CONFIG_AD9852=y
CONFIG_AD9910=y
# CONFIG_AD9951 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
CONFIG_ADIS16260=y
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set
#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
CONFIG_ADE7754=y
CONFIG_ADE7758=y
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
# CONFIG_ADE7854_SPI is not set
#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
# CONFIG_AD2S1210 is not set
#
# Triggers - standalone
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_ZSMALLOC=y
CONFIG_ZRAM=y
# CONFIG_ZRAM_DEBUG is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_VIDEO_DT3155 is not set
# CONFIG_SOLO6X10 is not set
CONFIG_LIRC_STAGING=y
# CONFIG_LIRC_BT829 is not set
# CONFIG_LIRC_PARALLEL is not set
CONFIG_LIRC_SERIAL=y
CONFIG_LIRC_SERIAL_TRANSMITTER=y
# CONFIG_LIRC_SIR is not set
CONFIG_LIRC_ZILOG=y
#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# CONFIG_ASHMEM is not set
CONFIG_ANDROID_LOGGER=y
# CONFIG_ANDROID_TIMED_OUTPUT is not set
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_SYNC=y
CONFIG_SW_SYNC=y
CONFIG_SW_SYNC_USER=y
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_DGRP is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=y
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_SAMSUNG_Q10=y
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_ARIZONA=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_KXSD9=y
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7923 is not set
CONFIG_AD7791=y
CONFIG_AD7793=y
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
# CONFIG_LP8788_ADC is not set
CONFIG_MAX1363=y
# CONFIG_MCP320X is not set
CONFIG_TI_ADC081C=y
CONFIG_TI_AM335X_ADC=y
#
# Amplifiers
#
# CONFIG_AD8366 is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5360=y
CONFIG_AD5380=y
# CONFIG_AD5421 is not set
CONFIG_AD5624R_SPI=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5504=y
CONFIG_AD5755=y
# CONFIG_AD5764 is not set
CONFIG_AD5791=y
CONFIG_AD5686=y
# CONFIG_AD7303 is not set
CONFIG_MAX517=y
CONFIG_MCP4725=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
CONFIG_ADIS16136=y
CONFIG_ADXRS450=y
CONFIG_HID_SENSOR_GYRO_3D=y
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
# CONFIG_ADIS16480 is not set
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
# CONFIG_INV_MPU6050_IIO is not set
#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_SENSORS_LM3533=y
CONFIG_SENSORS_TSL2563=y
CONFIG_VCNL4000=y
# CONFIG_HID_SENSOR_ALS is not set
#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Pressure Sensors
#
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
# CONFIG_BTRFS_DEBUG is not set
CONFIG_NILFS2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
CONFIG_LOGFS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
CONFIG_QNX6FS_DEBUG=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
CONFIG_PSTORE_RAM=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_EXOFS_FS=y
CONFIG_EXOFS_DEBUG=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_ORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
#
# Runtime Testing
#
CONFIG_LKDTM=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_ASYNC_RAID6_TEST=y
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446
2013-09-02 10:23 [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446 Fengguang Wu
@ 2013-09-16 9:15 ` Arend van Spriel
2013-09-16 9:50 ` Fengguang Wu
2013-09-23 12:14 ` Fengguang Wu
0 siblings, 2 replies; 5+ messages in thread
From: Arend van Spriel @ 2013-09-16 9:15 UTC (permalink / raw)
To: Fengguang Wu
Cc: Hante Meuleman, John W. Linville, linux-kernel, linux-wireless,
brcm80211-dev-list
[-- Attachment #1: Type: text/plain, Size: 6725 bytes --]
On 09/02/2013 12:23 PM, Fengguang Wu wrote:
> Greetings,
>
> I got the below dmesg and the first bad commit is
Hi Fengguang,
I could not reproduce this issue. Could you retest with the attached
patch file applied and let me know if that fixes the problem?
Regards,
Arend
> commit 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b
> Author: Hante Meuleman <meuleman@broadcom.com>
> Date: Fri Apr 12 10:55:55 2013 +0200
>
> brcmfmac: define and use platform specific data for SDIO.
>
> This patch adds support for platform specific data for SDIO
> fullmac devices. Currently OOB interrupts are configured by Kconfig
> BRCMFMAC_SDIO_OOB but that is now determined dynamically by checking
> availibility of platform data.
>
> Cc: Hauke Mehrtens <hauke@hauke-m.de>
> Reviewed-by: Arend Van Spriel <arend@broadcom.com>
> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
> Reviewed-by: Piotr Haber <phaber@broadcom.com>
> Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
> Signed-off-by: Arend van Spriel <arend@broadcom.com>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
>
>
> [ 48.966342] Switched to clocksource tsc
> [ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
> [ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446
> [ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26
> [ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163
> [ 48.970957] Oops: 0011 [#1]
> [ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23
> [ 48.970957] Workqueue: events brcmf_driver_init
> [ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000
> [ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26
> [ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286
> [ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000
> [ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0
> [ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002
> [ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0
> [ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300
> [ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000
> [ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0
> [ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
> [ 48.970957] Stack:
> [ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9
> [ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8
> [ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000
> [ 48.970957] Call Trace:
> [ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70
> [ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10
> [ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480
> [ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480
> [ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0
> [ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480
> [ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0
> [ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0
> [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
> [ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0
> [ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
> [ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
> [ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26
> [ 48.970957] RSP <ffff8800001d5d40>
> [ 48.970957] CR2: ffffffff82196446
> [ 48.970957] ---[ end trace 62980817cd525f14 ]---
>
> git bisect start v3.10 v3.9 --
> git bisect bad 20b4fb485227404329e41ad15588afad3df23050 # 12:16 9- Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
> git bisect good 19b344efa35dbc253e2d10403dafe6aafda73c56 # 17:54 800+ Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
> git bisect bad 20074f357da4a637430aec2879c9d864c5d2c23c # 18:03 1- filter: fix va_list build error
> git bisect good 953c96e0d85615d1ab1f100e525d376053294dc2 # 21:38 800+ tg3: Use bool not int
> git bisect bad 4de41bef3e075dbc787f7c53b3562f23295f1d6d # 22:21 102- wil6210: Use cached copy of Tx descriptor
> git bisect good e73dcfbf061b524fe9aaef56cf3c2e234a45ec19 # 01:19 800+ Bluetooth: hidp: fix sending output reports on intr channel
> git bisect good c79490e1b5ebf35415147fe06f02d8e77ccfe6d4 # 07:18 800+ NFC: pn533: Avoid function declarations
> git bisect bad 06d961a8e210035bff7e82f466107f9ab4a8fd94 # 07:49 55- mac80211/minstrel: use the new rate control API
> git bisect good 97990a060e6757f48b931a3946b17c1c4362c3fb # 10:43 800+ nl80211: allow using wdev identifiers to get scan results
> git bisect bad 31ed07dc1e83b7926ce8ee2215ea21599a215990 # 11:15 77- brcmfmac: remove ifidx variable from brcmf_fws_process_skb()
> git bisect good 1e9ab4dd258ecbb0f1c377fd4dbe227cdb93d9bd # 14:16 800+ brcmfmac: setup SDIO reset behavior
> git bisect bad 668761ac01d6f5a36b8e5a24d4e154550e2c4c3b # 15:03 38- brcmfmac: define and use platform specific data for SDIO.
> git bisect good 369508c5656db290f09b32d213effeea6c1431b8 # 18:30 800+ brcmfmac: Add 43143 SDIO support.
> git bisect good 979c29205ffa607c59ba2c9f9c083b967d356c97 # 19:54 800+ brcmfmac: Add drive strength programming for SDIO 43143.
> git bisect good 979c29205ffa607c59ba2c9f9c083b967d356c97 # 05:19 2400+ brcmfmac: Add drive strength programming for SDIO 43143.
> git bisect bad c52dd7f94c5d5386413cb95462ac802847fa5f3a # 05:20 0- Merge remote-tracking branch 'sound/for-linus' into devel-cairo-x86_64-201308281454
> git bisect bad d9eda0fae1394ea1e1c59c94d4a120ad9c06e64a # 11:50 27- Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
> git bisect bad 797c8d18e6804f054e68555e6cf827827b6a073c # 12:47 1- Add linux-next specific files for 20130830
>
> Thanks,
> Fengguang
>
[-- Attachment #2: 0001-brcmfmac-obtain-platform-data-upon-module-initializa.patch --]
[-- Type: text/plain, Size: 7964 bytes --]
>From f2d01b847944dc329ed4fd420acb270319dc853d Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Fri, 13 Sep 2013 15:36:05 +0200
Subject: [PATCH] brcmfmac: obtain platform data upon module initialization
The driver uses platform_driver_probe() to obtain platform data
if any. However, that function is placed in the .init section so
it must be called upon driver module initialization.
The problem was reported by Fenguang Wu resulting in a kernel
oops because the .init section was already freed.
[ 48.966342] Switched to clocksource tsc
[ 48.970002] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 48.970851] BUG: unable to handle kernel paging request at ffffffff82196446
[ 48.970957] IP: [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] PGD 1e76067 PUD 1e77063 PMD f388063 PTE 8000000002196163
[ 48.970957] Oops: 0011 [#1]
[ 48.970957] CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 3.11.0-rc7-00444-gc52dd7f #23
[ 48.970957] Workqueue: events brcmf_driver_init
[ 48.970957] task: ffff8800001d2000 ti: ffff8800001d4000 task.ti: ffff8800001d4000
[ 48.970957] RIP: 0010:[<ffffffff82196446>] [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP: 0000:ffff8800001d5d40 EFLAGS: 00000286
[ 48.970957] RAX: 0000000000000001 RBX: ffffffff820c5620 RCX: 0000000000000000
[ 48.970957] RDX: 0000000000000001 RSI: ffffffff816f7380 RDI: ffffffff820c56c0
[ 48.970957] RBP: ffff8800001d5d50 R08: ffff8800001d2508 R09: 0000000000000002
[ 48.970957] R10: 0000000000000000 R11: 0001f7ce298c5620 R12: ffff8800001c76b0
[ 48.970957] R13: ffffffff81e91d40 R14: 0000000000000000 R15: ffff88000e0ce300
[ 48.970957] FS: 0000000000000000(0000) GS:ffffffff81e84000(0000) knlGS:0000000000000000
[ 48.970957] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 48.970957] CR2: ffffffff82196446 CR3: 0000000001e75000 CR4: 00000000000006b0
[ 48.970957] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 48.970957] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
[ 48.970957] Stack:
[ 48.970957] ffffffff816f7df8 ffffffff820c5620 ffff8800001d5d60 ffffffff816eeec9
[ 48.970957] ffff8800001d5de0 ffffffff81073dc5 ffffffff81073d68 ffff8800001d5db8
[ 48.970957] 0000000000000086 ffffffff820c5620 ffffffff824f7fd0 0000000000000000
[ 48.970957] Call Trace:
[ 48.970957] [<ffffffff816f7df8>] ? brcmf_sdio_init+0x18/0x70
[ 48.970957] [<ffffffff816eeec9>] brcmf_driver_init+0x9/0x10
[ 48.970957] [<ffffffff81073dc5>] process_one_work+0x1d5/0x480
[ 48.970957] [<ffffffff81073d68>] ? process_one_work+0x178/0x480
[ 48.970957] [<ffffffff81074188>] worker_thread+0x118/0x3a0
[ 48.970957] [<ffffffff81074070>] ? process_one_work+0x480/0x480
[ 48.970957] [<ffffffff8107aa17>] kthread+0xe7/0xf0
[ 48.970957] [<ffffffff810829f7>] ? finish_task_switch.constprop.57+0x37/0xd0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] [<ffffffff81a6923a>] ret_from_fork+0x7a/0xb0
[ 48.970957] [<ffffffff8107a930>] ? __kthread_parkme+0x80/0x80
[ 48.970957] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 48.970957] RIP [<ffffffff82196446>] classes_init+0x26/0x26
[ 48.970957] RSP <ffff8800001d5d40>
[ 48.970957] CR2: ffffffff82196446
[ 48.970957] ---[ end trace 62980817cd525f14 ]---
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
.../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 28 +++++++++-----------
drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 3 ++-
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 14 +++++-----
drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 +-
4 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index f849d73..40dcfe5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -459,8 +459,6 @@ static struct sdio_driver brcmf_sdmmc_driver = {
static int brcmf_sdio_pd_probe(struct platform_device *pdev)
{
- int ret;
-
brcmf_dbg(SDIO, "Enter\n");
brcmfmac_sdio_pdata = pdev->dev.platform_data;
@@ -468,11 +466,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev)
if (brcmfmac_sdio_pdata->power_on)
brcmfmac_sdio_pdata->power_on();
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
- if (ret)
- brcmf_err("sdio_register_driver failed: %d\n", ret);
-
- return ret;
+ return 0;
}
static int brcmf_sdio_pd_remove(struct platform_device *pdev)
@@ -495,6 +489,15 @@ static struct platform_driver brcmf_sdio_pd = {
}
};
+void brcmf_sdio_register(void)
+{
+ int ret;
+
+ ret = sdio_register_driver(&brcmf_sdmmc_driver);
+ if (ret)
+ brcmf_err("sdio_register_driver failed: %d\n", ret);
+}
+
void brcmf_sdio_exit(void)
{
brcmf_dbg(SDIO, "Enter\n");
@@ -505,18 +508,13 @@ void brcmf_sdio_exit(void)
sdio_unregister_driver(&brcmf_sdmmc_driver);
}
-void brcmf_sdio_init(void)
+void __init brcmf_sdio_init(void)
{
int ret;
brcmf_dbg(SDIO, "Enter\n");
ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
- if (ret == -ENODEV) {
- brcmf_dbg(SDIO, "No platform data available, registering without.\n");
- ret = sdio_register_driver(&brcmf_sdmmc_driver);
- }
-
- if (ret)
- brcmf_err("driver registration failed: %d\n", ret);
+ if (ret == -ENODEV)
+ brcmf_dbg(SDIO, "No platform data available.\n");
}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index f7c1985..74156f8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -156,10 +156,11 @@ extern int brcmf_bus_start(struct device *dev);
#ifdef CONFIG_BRCMFMAC_SDIO
extern void brcmf_sdio_exit(void);
extern void brcmf_sdio_init(void);
+extern void brcmf_sdio_register(void);
#endif
#ifdef CONFIG_BRCMFMAC_USB
extern void brcmf_usb_exit(void);
-extern void brcmf_usb_init(void);
+extern void brcmf_usb_register(void);
#endif
#endif /* _BRCMF_BUS_H_ */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index b45a4e8..5b330c8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -1230,21 +1230,23 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp)
return bus->chip << 4 | bus->chiprev;
}
-static void brcmf_driver_init(struct work_struct *work)
+static void brcmf_driver_register(struct work_struct *work)
{
- brcmf_debugfs_init();
-
#ifdef CONFIG_BRCMFMAC_SDIO
- brcmf_sdio_init();
+ brcmf_sdio_register();
#endif
#ifdef CONFIG_BRCMFMAC_USB
- brcmf_usb_init();
+ brcmf_usb_register();
#endif
}
-static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init);
+static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
static int __init brcmfmac_module_init(void)
{
+ brcmf_debugfs_init();
+#ifdef CONFIG_BRCMFMAC_SDIO
+ brcmf_sdio_init();
+#endif
if (!schedule_work(&brcmf_driver_work))
return -EBUSY;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 39e01a7..f4aea47 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1539,7 +1539,7 @@ void brcmf_usb_exit(void)
brcmf_release_fw(&fw_image_list);
}
-void brcmf_usb_init(void)
+void brcmf_usb_register(void)
{
brcmf_dbg(USB, "Enter\n");
INIT_LIST_HEAD(&fw_image_list);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446
2013-09-16 9:15 ` Arend van Spriel
@ 2013-09-16 9:50 ` Fengguang Wu
2013-09-23 12:14 ` Fengguang Wu
1 sibling, 0 replies; 5+ messages in thread
From: Fengguang Wu @ 2013-09-16 9:50 UTC (permalink / raw)
To: Arend van Spriel
Cc: Hante Meuleman, John W. Linville, linux-kernel, linux-wireless,
brcm80211-dev-list
On Mon, Sep 16, 2013 at 11:15:53AM +0200, Arend van Spriel wrote:
> On 09/02/2013 12:23 PM, Fengguang Wu wrote:
> >Greetings,
> >
> >I got the below dmesg and the first bad commit is
>
> Hi Fengguang,
>
> I could not reproduce this issue. Could you retest with the attached
> patch file applied and let me know if that fixes the problem?
Sure. I've queued the patch for testing. Will report back 1-2 days
later.
Thanks,
Fengguang
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446
2013-09-16 9:15 ` Arend van Spriel
2013-09-16 9:50 ` Fengguang Wu
@ 2013-09-23 12:14 ` Fengguang Wu
2013-09-23 20:07 ` Arend van Spriel
1 sibling, 1 reply; 5+ messages in thread
From: Fengguang Wu @ 2013-09-23 12:14 UTC (permalink / raw)
To: Arend van Spriel
Cc: Hante Meuleman, John W. Linville, linux-kernel, linux-wireless,
brcm80211-dev-list
On Mon, Sep 16, 2013 at 11:15:53AM +0200, Arend van Spriel wrote:
> On 09/02/2013 12:23 PM, Fengguang Wu wrote:
> >Greetings,
> >
> >I got the below dmesg and the first bad commit is
>
> Hi Fengguang,
>
> I could not reproduce this issue. Could you retest with the attached
> patch file applied and let me know if that fixes the problem?
Yeah it fixed the problem: no more oops in 1000 kernel boot tests. Thank you!
Cheers,
Fengguang
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446
2013-09-23 12:14 ` Fengguang Wu
@ 2013-09-23 20:07 ` Arend van Spriel
0 siblings, 0 replies; 5+ messages in thread
From: Arend van Spriel @ 2013-09-23 20:07 UTC (permalink / raw)
To: Fengguang Wu
Cc: Hante Meuleman, John W. Linville, linux-kernel, linux-wireless,
brcm80211-dev-list
On 09/23/2013 02:14 PM, Fengguang Wu wrote:
> On Mon, Sep 16, 2013 at 11:15:53AM +0200, Arend van Spriel wrote:
>> On 09/02/2013 12:23 PM, Fengguang Wu wrote:
>>> Greetings,
>>>
>>> I got the below dmesg and the first bad commit is
>>
>> Hi Fengguang,
>>
>> I could not reproduce this issue. Could you retest with the attached
>> patch file applied and let me know if that fixes the problem?
>
> Yeah it fixed the problem: no more oops in 1000 kernel boot tests. Thank you!
Whoa, 1000 boots. Thank you for being so thorough :-)
Regards,
Arend
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-09-23 20:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-02 10:23 [brcmfmac] BUG: unable to handle kernel paging request at ffffffff82196446 Fengguang Wu
2013-09-16 9:15 ` Arend van Spriel
2013-09-16 9:50 ` Fengguang Wu
2013-09-23 12:14 ` Fengguang Wu
2013-09-23 20:07 ` Arend van Spriel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).