From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from farad.et-inf.fho-emden.de ([139.13.80.1]:48751 "EHLO farad.et-inf.fho-emden.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752190Ab3KVJaO convert rfc822-to-8bit (ORCPT ); Fri, 22 Nov 2013 04:30:14 -0500 Date: Fri, 22 Nov 2013 10:30:07 +0100 From: Mark Kettner To: Simon Wunderlich Cc: Nicolas Cavallari , linux-wireless@vger.kernel.org Subject: Re: WPA_Supplicant: no unicast with wpa encryption Message-ID: <20131122103007.67e81f97@mke-x61t> (sfid-20131122_103021_001922_6EDBB719) In-Reply-To: <201311151612.50894.sw@simonwunderlich.de> References: <20131115101803.66967a4e@mke-x61t> <5285EC8C.3050708@lri.fr> <20131115141635.663e48d7@mke-x61t> <201311151612.50894.sw@simonwunderlich.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, the update was quite a hassle, but now everything works fine, many thanks. -Mark On Fri, 15 Nov 2013 16:12:50 +0100 Simon Wunderlich wrote: > Mark, > > > On Fri, 15 Nov 2013 10:42:36 +0100 Nicolas Cavallari > > > > wrote: > > > > […] > > > > > > WPA-NONE is not true WPA. Support for it was broken in > > > wpasupplicant for a long time, and the kernel does not support it > > > anymore. Use IBSS RSN instead : > > > > > > proto=RSN > > > key_mgmt=WPA-PSK > > > pairwise=CCMP > > > group=CCMP > > > > > > > and the /etc/network/interfaces like this: > > > > auto lo > > > > > > > > iface lo inet loopback > > > > iface eth0 inet dhcp > > > > > > > > allow-hotplug wlan0 > > > > iface wlan0 inet static > > > > > > > > address 192.168.13.37 > > > > netmask 255.255.255.255 > > > > > > > > # Load WPA-Supplicant for WPA in Ad-Hoc Mode > > > > wpa-driver wext > > > > > > wext is deprecated, use nl80211 instead. > > > > thanks for your reply. > > > > I am now using the driver nl80211 and everything works again. But > > if I apply the changes to the wpa_supplicant configuration I'm > > getting these errors http://pastebin.com/GYW0mng2 in a endless loop. > > you might need a recent version of wpa_supplicant as well - AFAIK > v2.0 or higher. If that is already installed, please let us know your > kernel version and wpa_supplicant version. > > Cheers, > Simon