From: William Park <opengeometry@yahoo.ca>
To: linux-wireless@vger.kernel.org
Subject: 2.4GHz working, but 5GHz not working
Date: Sat, 14 Dec 2013 00:21:57 -0500 [thread overview]
Message-ID: <20131214052157.GA5372@node1.localdomain> (raw)
Hi,
I have Linksys WMP600N dual-band PCI adapter (rt2800pci) which used to
work, but now 5GHz is not working. Router is ok, since my laptop can
connect 5GHz.
I tried 3.10 and 3.12 kernels (that I compiled myself) and many distros
(both live and regular install), and they all exhibit the same problem.
When attempt is made to connect 5GHz, I get:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2126 at /home/kernel/linux-3.12/drivers/net/wireless/rt2x00/rt2x00config.c:201 rt2x00lib_config+0x293/0x2e0 [rt2x00lib]()
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat btrfs libcrc32c fuse vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables dm_mod nvidia(PO) snd_hda_codec_hdmi acpi_cpufreq processor edac_core sp5100_tco arc4 rt2800pci rt2800lib rt2x00pci rt2x00mmio rt2x00lib mac80211 cfg80211 eeprom_93cx6 drm agpgart r8169 psmouse evdev mii thermal_sys mac_hid k10temp i2c_piix4 crc_ccitt i2c_core edac_mce_amd button hwmon rtc_cmos rfkill wmi serio_raw ohci_pci ohci_hcd kvm_amd kvm snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore microcode loop
CPU: 0 PID: 2126 Comm: wpa_supplicant Tainted: P O 3.12.3 #1
Hardware name: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 1605 10/25/2012
0000000000000009 ffff88007ff135d8 ffffffff814e59c1 0000000000000007
0000000000000000 ffff88007ff13618 ffffffff8103fff2 0000000000000038
ffff880416d05720 ffff880416d045c0 0000000000000042 0000000000000040
Call Trace:
[<ffffffff814e59c1>] dump_stack+0x46/0x58
[<ffffffff8103fff2>] warn_slowpath_common+0x82/0xb0
[<ffffffff81040035>] warn_slowpath_null+0x15/0x20
[<ffffffffa0464f73>] rt2x00lib_config+0x293/0x2e0 [rt2x00lib]
[<ffffffffa0464463>] rt2x00mac_config+0x43/0x80 [rt2x00lib]
[<ffffffffa040543d>] ieee80211_hw_config+0x5d/0x2c0 [mac80211]
[<ffffffffa042e033>] ieee80211_vif_use_channel+0x3a3/0x440 [mac80211]
[<ffffffffa042f898>] ieee80211_prep_connection+0x138/0x820 [mac80211]
[<ffffffff811a27f0>] ? ext4_ext_find_extent+0x220/0x2a0
[<ffffffff814e1fd6>] ? printk+0x48/0x4a
[<ffffffffa0434811>] ieee80211_mgd_auth+0x2a1/0x310 [mac80211]
[<ffffffffa04191e3>] ieee80211_auth+0x13/0x20 [mac80211]
[<ffffffffa03e4b03>] cfg80211_mlme_auth+0x173/0x1a0 [cfg80211]
[<ffffffffa03d6afc>] nl80211_authenticate+0x2cc/0x330 [cfg80211]
[<ffffffff81461edc>] genl_family_rcv_msg+0x17c/0x380
[<ffffffff814620e0>] ? genl_family_rcv_msg+0x380/0x380
[<ffffffff81462159>] genl_rcv_msg+0x79/0xb0
[<ffffffff81461959>] netlink_rcv_skb+0xa9/0xc0
[<ffffffff81461bb7>] genl_rcv+0x27/0x40
[<ffffffff81460eed>] netlink_unicast+0x10d/0x190
[<ffffffff81461289>] netlink_sendmsg+0x319/0x760
[<ffffffff81422594>] sock_sendmsg+0x64/0x80
[<ffffffff8142e799>] ? verify_iovec+0x49/0xd0
[<ffffffff814228a4>] ___sys_sendmsg.part.30+0x2a4/0x2c0
[<ffffffff81035fec>] ? __do_page_fault+0x1ec/0x4f0
[<ffffffff811319af>] ? mntput+0x1f/0x30
[<ffffffff81115bba>] ? __fput+0x16a/0x230
[<ffffffff814232c0>] __sys_sendmsg+0x50/0x90
[<ffffffff81423309>] SyS_sendmsg+0x9/0x10
[<ffffffff814ec222>] system_call_fastpath+0x16/0x1b
---[ end trace 9b341a9f9ef3f57c ]---
This is a sign that the card is failing?
--
William
next reply other threads:[~2013-12-14 5:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-14 5:21 William Park [this message]
2013-12-15 19:14 ` 2.4GHz working, but 5GHz not working William Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131214052157.GA5372@node1.localdomain \
--to=opengeometry@yahoo.ca \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).