From: Stanislaw Gruszka <sgruszka@redhat.com>
To: linux-wireless@vger.kernel.org
Cc: Oleksij Rempel <linux@rempel-privat.de>, ath9k-devel@venema.h4ckr.net
Subject: [PATCH] ath9k_htc: avoid scheduling while atomic on sta_rc_update
Date: Mon, 3 Feb 2014 11:45:51 +0100 [thread overview]
Message-ID: <20140203104550.GC1725@redhat.com> (raw)
mac80211 ->sta_rc_update() callback must be atomic. Since we have to
take mutex and do other operations that can sleep when sending fimrware
commands to device, the only option to satisfy atomicity requirement of
->sta_rc_update(), that I can see, is introduce work_struct and defer
uploading new rates to that work.
Tested-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
This is on top of my previous patch:
"ath9k_htc: make ->sta_rc_update atomic for most calls"
drivers/net/wireless/ath/ath9k/htc.h | 2 +
drivers/net/wireless/ath/ath9k/htc_drv_main.c | 60 +++++++++++++++++----------
2 files changed, 40 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 58da346..99a2031 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -262,6 +262,8 @@ enum tid_aggr_state {
struct ath9k_htc_sta {
u8 index;
enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID];
+ struct work_struct rc_update_work;
+ struct ath9k_htc_priv *htc_priv;
};
#define ATH9K_HTC_RXBUF 256
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index a57af9b..c9254a6 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1270,18 +1270,50 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw,
mutex_unlock(&priv->mutex);
}
+static void ath9k_htc_sta_rc_update_work(struct work_struct *work)
+{
+ struct ath9k_htc_sta *ista =
+ container_of(work, struct ath9k_htc_sta, rc_update_work);
+ struct ieee80211_sta *sta =
+ container_of((void *)ista, struct ieee80211_sta, drv_priv);
+ struct ath9k_htc_priv *priv = ista->htc_priv;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_target_rate trate;
+
+ mutex_lock(&priv->mutex);
+ ath9k_htc_ps_wakeup(priv);
+
+ memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
+ ath9k_htc_setup_rate(priv, sta, &trate);
+ if (!ath9k_htc_send_rate_cmd(priv, &trate))
+ ath_dbg(common, CONFIG,
+ "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
+ sta->addr, be32_to_cpu(trate.capflags));
+ else
+ ath_dbg(common, CONFIG,
+ "Unable to update supported rates for sta: %pM\n",
+ sta->addr);
+
+ ath9k_htc_ps_restore(priv);
+ mutex_unlock(&priv->mutex);
+}
+
static int ath9k_htc_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
ret = ath9k_htc_add_station(priv, vif, sta);
- if (!ret)
+ if (!ret) {
+ INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work);
+ ista->htc_priv = priv;
ath9k_htc_init_rate(priv, sta);
+ }
ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
@@ -1293,12 +1325,13 @@ static int ath9k_htc_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
- struct ath9k_htc_sta *ista;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
+ cancel_work_sync(&ista->rc_update_work);
+
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
- ista = (struct ath9k_htc_sta *) sta->drv_priv;
htc_sta_drain(priv->htc, ista->index);
ret = ath9k_htc_remove_station(priv, vif, sta);
ath9k_htc_ps_restore(priv);
@@ -1311,29 +1344,12 @@ static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta, u32 changed)
{
- struct ath9k_htc_priv *priv = hw->priv;
- struct ath_common *common = ath9k_hw_common(priv->ah);
- struct ath9k_htc_target_rate trate;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED))
return;
- mutex_lock(&priv->mutex);
- ath9k_htc_ps_wakeup(priv);
-
- memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
- ath9k_htc_setup_rate(priv, sta, &trate);
- if (!ath9k_htc_send_rate_cmd(priv, &trate))
- ath_dbg(common, CONFIG,
- "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
- sta->addr, be32_to_cpu(trate.capflags));
- else
- ath_dbg(common, CONFIG,
- "Unable to update supported rates for sta: %pM\n",
- sta->addr);
-
- ath9k_htc_ps_restore(priv);
- mutex_unlock(&priv->mutex);
+ schedule_work(&ista->rc_update_work);
}
static int ath9k_htc_conf_tx(struct ieee80211_hw *hw,
--
1.7.11.7
reply other threads:[~2014-02-03 10:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140203104550.GC1725@redhat.com \
--to=sgruszka@redhat.com \
--cc=ath9k-devel@venema.h4ckr.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linux@rempel-privat.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).