* [PATCH v4 01/11] rsi: Adding RS9113 driver header files
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 02/11] rsi: Adding remaining " fariyaf
` (11 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch contains all the header files.
---
drivers/net/wireless/rsi/rsi_boot_params.h | 126 +++++++++++++++
drivers/net/wireless/rsi/rsi_debugfs.h | 48 ++++++
drivers/net/wireless/rsi/rsi_main.h | 232 ++++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_sdio.h | 129 +++++++++++++++
drivers/net/wireless/rsi/rsi_usb.h | 70 +++++++++
5 files changed, 605 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_boot_params.h
create mode 100644 drivers/net/wireless/rsi/rsi_debugfs.h
create mode 100644 drivers/net/wireless/rsi/rsi_main.h
create mode 100644 drivers/net/wireless/rsi/rsi_sdio.h
create mode 100644 drivers/net/wireless/rsi/rsi_usb.h
diff --git a/drivers/net/wireless/rsi/rsi_boot_params.h b/drivers/net/wireless/rsi/rsi_boot_params.h
new file mode 100644
index 0000000..5e2721f
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_boot_params.h
@@ -0,0 +1,126 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_BOOTPARAMS_HEADER_H__
+#define __RSI_BOOTPARAMS_HEADER_H__
+
+#define CRYSTAL_GOOD_TIME BIT(0)
+#define BOOTUP_MODE_INFO BIT(1)
+#define WIFI_TAPLL_CONFIGS BIT(5)
+#define WIFI_PLL960_CONFIGS BIT(6)
+#define WIFI_AFEPLL_CONFIGS BIT(7)
+#define WIFI_SWITCH_CLK_CONFIGS BIT(8)
+
+#define TA_PLL_M_VAL_20 8
+#define TA_PLL_N_VAL_20 1
+#define TA_PLL_P_VAL_20 4
+
+#define PLL960_M_VAL_20 0x14
+#define PLL960_N_VAL_20 0
+#define PLL960_P_VAL_20 5
+
+#define UMAC_CLK_40MHZ 40
+
+#define TA_PLL_M_VAL_40 46
+#define TA_PLL_N_VAL_40 3
+#define TA_PLL_P_VAL_40 3
+
+#define PLL960_M_VAL_40 0x14
+#define PLL960_N_VAL_40 0
+#define PLL960_P_VAL_40 5
+
+#define UMAC_CLK_20BW \
+ (((TA_PLL_M_VAL_20 + 1) * 40) / \
+ ((TA_PLL_N_VAL_20 + 1) * (TA_PLL_P_VAL_20 + 1)))
+#define VALID_20 \
+ (WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS)
+#define UMAC_CLK_40BW \
+ (((TA_PLL_M_VAL_40 + 1) * 40) / \
+ ((TA_PLL_N_VAL_40 + 1) * (TA_PLL_P_VAL_40 + 1)))
+#define VALID_40 \
+ (WIFI_PLL960_CONFIGS | WIFI_AFEPLL_CONFIGS | WIFI_SWITCH_CLK_CONFIGS | \
+ WIFI_TAPLL_CONFIGS | CRYSTAL_GOOD_TIME | BOOTUP_MODE_INFO)
+
+/* structure to store configs related to TAPLL programming */
+struct tapll_info {
+ __le16 pll_reg_1;
+ __le16 pll_reg_2;
+} __packed;
+
+/* structure to store configs related to PLL960 programming */
+struct pll960_info {
+ __le16 pll_reg_1;
+ __le16 pll_reg_2;
+ __le16 pll_reg_3;
+} __packed;
+
+/* structure to store configs related to AFEPLL programming */
+struct afepll_info {
+ __le16 pll_reg;
+} __packed;
+
+/* structure to store configs related to pll configs */
+struct pll_config {
+ struct tapll_info tapll_info_g;
+ struct pll960_info pll960_info_g;
+ struct afepll_info afepll_info_g;
+} __packed;
+
+/* structure to store configs related to UMAC clk programming */
+struct switch_clk {
+ __le16 switch_clk_info;
+ /* If switch_bbp_lmac_clk_reg is set then this value will be programmed
+ * into reg
+ */
+ __le16 bbp_lmac_clk_reg_val;
+ /* if switch_umac_clk is set then this value will be programmed */
+ __le16 umac_clock_reg_config;
+ /* if switch_qspi_clk is set then this value will be programmed */
+ __le16 qspi_uart_clock_reg_config;
+} __packed;
+
+struct device_clk_info {
+ struct pll_config pll_config_g;
+ struct switch_clk switch_clk_g;
+} __packed;
+
+struct bootup_params {
+ __le16 magic_number;
+ __le16 crystal_good_time;
+ __le32 valid;
+ __le32 reserved_for_valids;
+ __le16 bootup_mode_info;
+ /* configuration used for digital loop back */
+ __le16 digital_loop_back_params;
+ __le16 rtls_timestamp_en;
+ __le16 host_spi_intr_cfg;
+ struct device_clk_info device_clk_info[3];
+ /* ulp buckboost wait time */
+ __le32 buckboost_wakeup_cnt;
+ /* pmu wakeup wait time & WDT EN info */
+ __le16 pmu_wakeup_wait;
+ u8 shutdown_wait_time;
+ /* Sleep clock source selection */
+ u8 pmu_slp_clkout_sel;
+ /* WDT programming values */
+ __le32 wdt_prog_value;
+ /* WDT soc reset delay */
+ __le32 wdt_soc_rst_delay;
+ /* dcdc modes configs */
+ __le32 dcdc_operation_mode;
+ __le32 soc_reset_wait_cnt;
+} __packed;
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_debugfs.h b/drivers/net/wireless/rsi/rsi_debugfs.h
new file mode 100644
index 0000000..580ad3b
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_debugfs.h
@@ -0,0 +1,48 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_DEBUGFS_H__
+#define __RSI_DEBUGFS_H__
+
+#include "rsi_main.h"
+#include <linux/debugfs.h>
+
+#ifndef CONFIG_RSI_DEBUGFS
+static inline int rsi_init_dbgfs(struct rsi_hw *adapter)
+{
+ return 0;
+}
+
+static inline void rsi_remove_dbgfs(struct rsi_hw *adapter)
+{
+ return;
+}
+#else
+struct rsi_dbg_files {
+ const char *name;
+ umode_t perms;
+ const struct file_operations fops;
+};
+
+struct rsi_debugfs {
+ struct dentry *subdir;
+ struct rsi_dbg_ops *dfs_get_ops;
+ struct dentry *rsi_files[MAX_DEBUGFS_ENTRIES];
+};
+int rsi_init_dbgfs(struct rsi_hw *adapter);
+void rsi_remove_dbgfs(struct rsi_hw *adapter);
+#endif
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_main.h b/drivers/net/wireless/rsi/rsi_main.h
new file mode 100644
index 0000000..bebdc2a
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_main.h
@@ -0,0 +1,232 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_MAIN_H__
+#define __RSI_MAIN_H__
+
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#define ERR_ZONE BIT(0) /* For Error Msgs */
+#define INFO_ZONE BIT(1) /* For General Status Msgs */
+#define INIT_ZONE BIT(2) /* For Driver Init Seq Msgs */
+#define MGMT_TX_ZONE BIT(3) /* For TX Mgmt Path Msgs */
+#define MGMT_RX_ZONE BIT(4) /* For RX Mgmt Path Msgs */
+#define DATA_TX_ZONE BIT(5) /* For TX Data Path Msgs */
+#define DATA_RX_ZONE BIT(6) /* For RX Data Path Msgs */
+#define FSM_ZONE BIT(7) /* For State Machine Msgs */
+#define ISR_ZONE BIT(8) /* For Interrupt Msgs */
+
+#define FSM_CARD_NOT_READY 0
+#define FSM_BOOT_PARAMS_SENT 1
+#define FSM_EEPROM_READ_MAC_ADDR 2
+#define FSM_RESET_MAC_SENT 3
+#define FSM_RADIO_CAPS_SENT 4
+#define FSM_BB_RF_PROG_SENT 5
+#define FSM_MAC_INIT_DONE 6
+
+extern u32 rsi_zone_enabled;
+
+static inline void rsi_dbg(u32 zone, const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (zone & rsi_zone_enabled)
+ pr_info("%pV", &vaf);
+ va_end(args);
+}
+
+#define RSI_MAX_VIFS 1
+#define NUM_EDCA_QUEUES 4
+#define IEEE80211_ADDR_LEN 6
+#define FRAME_DESC_SZ 16
+#define MIN_802_11_HDR_LEN 24
+
+#define DATA_QUEUE_WATER_MARK 400
+#define MIN_DATA_QUEUE_WATER_MARK 300
+#define MULTICAST_WATER_MARK 200
+#define MAC_80211_HDR_FRAME_CONTROL 0
+#define WME_NUM_AC 4
+#define NUM_SOFT_QUEUES 5
+#define MAX_HW_QUEUES 8
+#define INVALID_QUEUE 0xff
+#define MAX_CONTINUOUS_VO_PKTS 8
+#define MAX_CONTINUOUS_VI_PKTS 4
+
+/* Queue information */
+#define RSI_WIFI_MGMT_Q 0x4
+#define RSI_WIFI_DATA_Q 0x5
+#define IEEE80211_MGMT_FRAME 0x00
+#define IEEE80211_CTL_FRAME 0x04
+
+#define IEEE80211_QOS_TID 0x0f
+#define IEEE80211_NONQOS_TID 16
+
+#define MAX_DEBUGFS_ENTRIES 4
+
+#define TID_TO_WME_AC(_tid) ( \
+ ((_tid) == 0 || (_tid) == 3) ? BE_Q : \
+ ((_tid) < 3) ? BK_Q : \
+ ((_tid) < 6) ? VI_Q : \
+ VO_Q)
+
+#define WME_AC(_q) ( \
+ ((_q) == BK_Q) ? IEEE80211_AC_BK : \
+ ((_q) == BE_Q) ? IEEE80211_AC_BE : \
+ ((_q) == VI_Q) ? IEEE80211_AC_VI : \
+ IEEE80211_AC_VO)
+
+struct version_info {
+ u16 major;
+ u16 minor;
+ u16 release_num;
+ u16 patch_num;
+} __packed;
+
+struct skb_info {
+ s8 rssi;
+ u32 flags;
+ u16 channel;
+ s8 tid;
+ s8 sta_id;
+};
+
+enum edca_queue {
+ BK_Q,
+ BE_Q,
+ VI_Q,
+ VO_Q,
+ MGMT_SOFT_Q
+};
+
+struct security_info {
+ bool security_enable;
+ u32 ptk_cipher;
+ u32 gtk_cipher;
+};
+
+struct wmm_qinfo {
+ s32 weight;
+ s32 wme_params;
+ s32 pkt_contended;
+};
+
+struct transmit_q_stats {
+ u32 total_tx_pkt_send[NUM_EDCA_QUEUES + 1];
+ u32 total_tx_pkt_freed[NUM_EDCA_QUEUES + 1];
+};
+
+struct vif_priv {
+ bool is_ht;
+ bool sgi;
+ u16 seq_start;
+};
+
+struct rsi_event {
+ atomic_t event_condition;
+ wait_queue_head_t event_queue;
+};
+
+struct rsi_thread {
+ void (*thread_function)(void *);
+ struct completion completion;
+ struct task_struct *task;
+ struct rsi_event event;
+ atomic_t thread_done;
+};
+
+struct rsi_hw;
+
+struct rsi_common {
+ struct rsi_hw *priv;
+ struct vif_priv vif_info[RSI_MAX_VIFS];
+
+ bool mgmt_q_block;
+ struct version_info driver_ver;
+ struct version_info fw_ver;
+
+ struct rsi_thread tx_thread;
+ struct sk_buff_head tx_queue[NUM_EDCA_QUEUES + 1];
+ /* Mutex declaration */
+ struct mutex mutex;
+ /* Mutex used between tx/rx threads */
+ struct mutex tx_rxlock;
+ u8 endpoint;
+
+ /* Channel/band related */
+ u8 band;
+ u8 channel_width;
+
+ u16 rts_threshold;
+ u16 bitrate_mask[2];
+ u32 fixedrate_mask[2];
+
+ u8 rf_reset;
+ struct transmit_q_stats tx_stats;
+ struct security_info secinfo;
+ struct wmm_qinfo tx_qinfo[NUM_EDCA_QUEUES];
+ struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];
+ u8 mac_addr[IEEE80211_ADDR_LEN];
+
+ /* state related */
+ u32 fsm_state;
+ bool init_done;
+ u8 bb_rf_prog_count;
+ bool iface_down;
+
+ /* Generic */
+ u8 channel;
+ u8 *rx_data_pkt;
+ u8 mac_id;
+ u8 radio_id;
+ u16 rate_pwr[20];
+ u16 min_rate;
+
+ /* WMM algo related */
+ u8 selected_qnum;
+ u32 pkt_cnt;
+ u8 min_weight;
+};
+
+struct rsi_hw {
+ struct rsi_common *priv;
+ struct ieee80211_hw *hw;
+ struct ieee80211_vif *vifs[RSI_MAX_VIFS];
+ struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];
+ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+
+ struct device *device;
+ u8 sc_nvifs;
+
+#ifdef CONFIG_RSI_DEBUGFS
+ struct rsi_debugfs *dfsentry;
+ u8 num_debugfs_entries;
+#endif
+ void *rsi_dev;
+ int (*host_intf_read_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+ int (*host_intf_write_pkt)(struct rsi_hw *adapter, u8 *pkt, u32 len);
+ int (*check_hw_queue_status)(struct rsi_hw *adapter, u8 q_num);
+ int (*rx_urb_submit)(struct rsi_hw *adapter);
+ int (*determine_event_timeout)(struct rsi_hw *adapter);
+};
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_sdio.h b/drivers/net/wireless/rsi/rsi_sdio.h
new file mode 100644
index 0000000..43d9d38
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -0,0 +1,129 @@
+/**
+ * @section LICENSE
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#ifndef __RSI_SDIO_INTF__
+#define __RSI_SDIO_INTF__
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio_ids.h>
+#include "rsi_main.h"
+
+enum sdio_interrupt_type {
+ BUFFER_FULL = 0x0,
+ BUFFER_AVAILABLE = 0x1,
+ FIRMWARE_ASSERT_IND = 0x3,
+ MSDU_PACKET_PENDING = 0x4,
+ UNKNOWN_INT = 0XE
+};
+
+/* Buffer status register related info */
+#define PKT_BUFF_SEMI_FULL 0
+#define PKT_BUFF_FULL 1
+#define PKT_MGMT_BUFF_FULL 2
+#define MSDU_PKT_PENDING 3
+/* Interrupt Bit Related Macros */
+#define PKT_BUFF_AVAILABLE 0
+#define FW_ASSERT_IND 2
+
+#define RSI_DEVICE_BUFFER_STATUS_REGISTER 0xf3
+#define RSI_FN1_INT_REGISTER 0xf9
+#define RSI_SD_REQUEST_MASTER 0x10000
+
+/* FOR SD CARD ONLY */
+#define SDIO_RX_NUM_BLOCKS_REG 0x000F1
+#define SDIO_FW_STATUS_REG 0x000F2
+#define SDIO_NXT_RD_DELAY2 0x000F5
+#define SDIO_MASTER_ACCESS_MSBYTE 0x000FA
+#define SDIO_MASTER_ACCESS_LSBYTE 0x000FB
+#define SDIO_READ_START_LVL 0x000FC
+#define SDIO_READ_FIFO_CTL 0x000FD
+#define SDIO_WRITE_FIFO_CTL 0x000FE
+#define SDIO_FUN1_INTR_CLR_REG 0x0008
+#define SDIO_REG_HIGH_SPEED 0x0013
+
+#define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE) \
+ { \
+ TYPE = \
+ (_I & (1 << PKT_BUFF_AVAILABLE)) ? \
+ BUFFER_AVAILABLE : \
+ (_I & (1 << MSDU_PKT_PENDING)) ? \
+ MSDU_PACKET_PENDING : \
+ (_I & (1 << FW_ASSERT_IND)) ? \
+ FIRMWARE_ASSERT_IND : UNKNOWN_INT; \
+ }
+
+/* common registers in SDIO function1 */
+#define TA_SOFT_RESET_REG 0x0004
+#define TA_TH0_PC_REG 0x0400
+#define TA_HOLD_THREAD_REG 0x0844
+#define TA_RELEASE_THREAD_REG 0x0848
+
+#define TA_SOFT_RST_CLR 0
+#define TA_SOFT_RST_SET BIT(0)
+#define TA_PC_ZERO 0
+#define TA_HOLD_THREAD_VALUE cpu_to_le32(0xF)
+#define TA_RELEASE_THREAD_VALUE cpu_to_le32(0xF)
+#define TA_BASE_ADDR 0x2200
+#define MISC_CFG_BASE_ADDR 0x4150
+
+struct receive_info {
+ bool buffer_full;
+ bool semi_buffer_full;
+ bool mgmt_buffer_full;
+ u32 mgmt_buf_full_counter;
+ u32 buf_semi_full_counter;
+ u8 watch_bufferfull_count;
+ u32 sdio_intr_status_zero;
+ u32 sdio_int_counter;
+ u32 total_sdio_msdu_pending_intr;
+ u32 total_sdio_unknown_intr;
+ u32 buf_full_counter;
+ u32 buf_avilable_counter;
+};
+
+struct rsi_91x_sdiodev {
+ struct sdio_func *pfunction;
+ struct task_struct *in_sdio_litefi_irq;
+ struct receive_info rx_info;
+ u32 next_read_delay;
+ u32 sdio_high_speed_enable;
+ u8 sdio_clock_speed;
+ u32 cardcapability;
+ u8 prev_desc[16];
+ u32 tx_blk_size;
+ u8 write_fail;
+};
+
+void rsi_interrupt_handler(struct rsi_hw *adapter);
+int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
+int rsi_device_init(struct rsi_common *common);
+int rsi_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
+int rsi_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
+int rsi_host_intf_write_pkt(struct rsi_hw *adapter, u8 *pkt, u32 len);
+int rsi_write_register(struct rsi_hw *adapter, u8 function, u32 addr, u8 *data);
+int rsi_write_register_multiple(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u32 count);
+void rsi_ack_interrupt(struct rsi_hw *adapter, u8 int_bit);
+int rsi_determine_event_timeout(struct rsi_hw *adapter);
+int rsi_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num);
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_usb.h b/drivers/net/wireless/rsi/rsi_usb.h
new file mode 100644
index 0000000..1d7b6ae
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_usb.h
@@ -0,0 +1,70 @@
+/**
+ * @section LICENSE
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_USB_INTF__
+#define __RSI_USB_INTF__
+
+#include <linux/usb.h>
+#include "rsi_main.h"
+#include "rsi_common.h"
+
+#define USB_INTERNAL_REG_1 0x25000
+#define RSI_USB_READY_MAGIC_NUM 0xab
+#define FW_STATUS_REG 0x41050012
+
+#define USB_VENDOR_REGISTER_READ 0x15
+#define USB_VENDOR_REGISTER_WRITE 0x16
+#define RSI_USB_TX_HEAD_ROOM 128
+
+#define MAX_RX_URBS 1
+#define MAX_BULK_EP 8
+#define MGMT_EP 1
+#define DATA_EP 2
+
+struct rsi_91x_usbdev {
+ struct rsi_thread rx_thread;
+ u8 endpoint;
+ struct usb_device *usbdev;
+ struct usb_interface *pfunction;
+ struct urb *rx_usb_urb[MAX_RX_URBS];
+ u8 *tx_buffer;
+ __le16 bulkin_size;
+ u8 bulkin_endpoint_addr;
+ __le16 bulkout_size[MAX_BULK_EP];
+ u8 bulkout_endpoint_addr[MAX_BULK_EP];
+ u32 tx_blk_size;
+ u8 write_fail;
+};
+
+static inline int rsi_check_queue_status(struct rsi_hw *adapter, u8 q_num)
+{
+ /* In USB, there isn't any need to check the queue status */
+ return QUEUE_NOT_FULL;
+}
+
+static inline int rsi_event_timeout(struct rsi_hw *adapter)
+{
+ return EVENT_WAIT_FOREVER;
+}
+
+int rsi_device_init(struct rsi_common *common);
+int rsi_write_ta_register_multiple(struct rsi_hw *adapter, u32 addr,
+ u8 *data, u32 count);
+int rsi_rx_urb_submit(struct rsi_hw *adapter);
+int rsi_host_intf_write_pkt(struct rsi_hw *adapter, u8 *pkt, u32 len);
+void rsi_usb_rx_thread(struct rsi_common *common);
+#endif
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 02/11] rsi: Adding remaining header files
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
2014-03-10 15:26 ` [PATCH v4 01/11] rsi: Adding RS9113 driver header files fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 03/11] rsi: Adding core and main files fariyaf
` (10 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch adds the remaining header files.
---
drivers/net/wireless/rsi/rsi_common.h | 87 ++++++++++
drivers/net/wireless/rsi/rsi_mgmt.h | 285 +++++++++++++++++++++++++++++++++
2 files changed, 372 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_common.h
create mode 100644 drivers/net/wireless/rsi/rsi_mgmt.h
diff --git a/drivers/net/wireless/rsi/rsi_common.h b/drivers/net/wireless/rsi/rsi_common.h
new file mode 100644
index 0000000..f2f7078
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_common.h
@@ -0,0 +1,87 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_COMMON_H__
+#define __RSI_COMMON_H__
+
+#include <linux/kthread.h>
+
+#define EVENT_WAIT_FOREVER 0
+#define TA_LOAD_ADDRESS 0x00
+#define FIRMWARE_RSI9113 "rsi_91x.fw"
+#define QUEUE_NOT_FULL 1
+#define QUEUE_FULL 0
+
+static inline int rsi_init_event(struct rsi_event *pevent)
+{
+ atomic_set(&pevent->event_condition, 1);
+ init_waitqueue_head(&pevent->event_queue);
+ return 0;
+}
+
+static inline int rsi_wait_event(struct rsi_event *event, u32 timeout)
+{
+ int status = 0;
+
+ if (!timeout)
+ status = wait_event_interruptible(event->event_queue,
+ (atomic_read(&event->event_condition) == 0));
+ else
+ status = wait_event_interruptible_timeout(event->event_queue,
+ (atomic_read(&event->event_condition) == 0),
+ timeout);
+ return status;
+}
+
+static inline void rsi_set_event(struct rsi_event *event)
+{
+ atomic_set(&event->event_condition, 0);
+ wake_up_interruptible(&event->event_queue);
+}
+
+static inline void rsi_reset_event(struct rsi_event *event)
+{
+ atomic_set(&event->event_condition, 1);
+}
+
+static inline int rsi_create_kthread(struct rsi_common *common,
+ struct rsi_thread *thread,
+ void *func_ptr,
+ u8 *name)
+{
+ init_completion(&thread->completion);
+ thread->task = kthread_run(func_ptr, common, name);
+ if (IS_ERR(thread->task))
+ return (int)PTR_ERR(thread->task);
+
+ return 0;
+}
+
+static inline int rsi_kill_thread(struct rsi_thread *handle)
+{
+ atomic_inc(&handle->thread_done);
+ rsi_set_event(&handle->event);
+
+ wait_for_completion(&handle->completion);
+ return kthread_stop(handle->task);
+}
+
+void rsi_mac80211_detach(struct rsi_hw *hw);
+u16 rsi_get_connected_channel(struct rsi_hw *adapter);
+struct rsi_hw *rsi_91x_init(void);
+void rsi_91x_deinit(struct rsi_hw *adapter);
+int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len);
+#endif
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
new file mode 100644
index 0000000..ac67c4a
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -0,0 +1,285 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_MGMT_H__
+#define __RSI_MGMT_H__
+
+#include <linux/sort.h>
+#include "rsi_boot_params.h"
+#include "rsi_main.h"
+
+#define MAX_MGMT_PKT_SIZE 512
+#define RSI_NEEDED_HEADROOM 80
+#define RSI_RCV_BUFFER_LEN 2000
+
+#define RSI_11B_MODE 0
+#define RSI_11G_MODE BIT(7)
+#define RETRY_COUNT 8
+#define RETRY_LONG 4
+#define RETRY_SHORT 7
+#define WMM_SHORT_SLOT_TIME 9
+#define SIFS_DURATION 16
+
+#define KEY_TYPE_CLEAR 0
+#define RSI_PAIRWISE_KEY 1
+#define RSI_GROUP_KEY 2
+
+/* EPPROM_READ_ADDRESS */
+#define WLAN_MAC_EEPROM_ADDR 40
+#define WLAN_MAC_MAGIC_WORD_LEN 0x01
+#define WLAN_HOST_MODE_LEN 0x04
+#define WLAN_FW_VERSION_LEN 0x08
+#define MAGIC_WORD 0x5A
+
+/* Receive Frame Types */
+#define TA_CONFIRM_TYPE 0x01
+#define RX_DOT11_MGMT 0x02
+#define TX_STATUS_IND 0x04
+#define PROBEREQ_CONFIRM 2
+#define CARD_READY_IND 0x00
+
+#define RSI_DELETE_PEER 0x0
+#define RSI_ADD_PEER 0x1
+#define START_AMPDU_AGGR 0x1
+#define STOP_AMPDU_AGGR 0x0
+#define INTERNAL_MGMT_PKT 0x99
+
+#define PUT_BBP_RESET 0
+#define BBP_REG_WRITE 0
+#define RF_RESET_ENABLE BIT(3)
+#define RATE_INFO_ENABLE BIT(0)
+#define RSI_BROADCAST_PKT BIT(9)
+
+#define UPPER_20_ENABLE (0x2 << 12)
+#define LOWER_20_ENABLE (0x4 << 12)
+#define FULL40M_ENABLE 0x6
+
+#define RSI_LMAC_CLOCK_80MHZ 0x1
+#define RSI_ENABLE_40MHZ (0x1 << 3)
+
+#define RX_BA_INDICATION 1
+#define RSI_TBL_SZ 40
+#define MAX_RETRIES 8
+
+#define STD_RATE_MCS7 0x07
+#define STD_RATE_MCS6 0x06
+#define STD_RATE_MCS5 0x05
+#define STD_RATE_MCS4 0x04
+#define STD_RATE_MCS3 0x03
+#define STD_RATE_MCS2 0x02
+#define STD_RATE_MCS1 0x01
+#define STD_RATE_MCS0 0x00
+#define STD_RATE_54 0x6c
+#define STD_RATE_48 0x60
+#define STD_RATE_36 0x48
+#define STD_RATE_24 0x30
+#define STD_RATE_18 0x24
+#define STD_RATE_12 0x18
+#define STD_RATE_11 0x16
+#define STD_RATE_09 0x12
+#define STD_RATE_06 0x0C
+#define STD_RATE_5_5 0x0B
+#define STD_RATE_02 0x04
+#define STD_RATE_01 0x02
+
+#define RSI_RF_TYPE 1
+#define RSI_RATE_00 0x00
+#define RSI_RATE_1 0x0
+#define RSI_RATE_2 0x2
+#define RSI_RATE_5_5 0x4
+#define RSI_RATE_11 0x6
+#define RSI_RATE_6 0x8b
+#define RSI_RATE_9 0x8f
+#define RSI_RATE_12 0x8a
+#define RSI_RATE_18 0x8e
+#define RSI_RATE_24 0x89
+#define RSI_RATE_36 0x8d
+#define RSI_RATE_48 0x88
+#define RSI_RATE_54 0x8c
+#define RSI_RATE_MCS0 0x100
+#define RSI_RATE_MCS1 0x101
+#define RSI_RATE_MCS2 0x102
+#define RSI_RATE_MCS3 0x103
+#define RSI_RATE_MCS4 0x104
+#define RSI_RATE_MCS5 0x105
+#define RSI_RATE_MCS6 0x106
+#define RSI_RATE_MCS7 0x107
+#define RSI_RATE_MCS7_SG 0x307
+
+#define BW_20MHZ 0
+#define BW_40MHZ 1
+
+#define RSI_SUPP_FILTERS (FIF_ALLMULTI | FIF_PROBE_REQ |\
+ FIF_BCN_PRBRESP_PROMISC)
+enum opmode {
+ STA_OPMODE = 1,
+ AP_OPMODE = 2
+};
+
+extern struct ieee80211_rate rsi_rates[12];
+extern const u16 rsi_mcsrates[8];
+
+enum sta_notify_events {
+ STA_CONNECTED = 0,
+ STA_DISCONNECTED,
+ STA_TX_ADDBA_DONE,
+ STA_TX_DELBA,
+ STA_RX_ADDBA_DONE,
+ STA_RX_DELBA
+};
+
+/* Send Frames Types */
+enum cmd_frame_type {
+ TX_DOT11_MGMT,
+ RESET_MAC_REQ,
+ RADIO_CAPABILITIES,
+ BB_PROG_VALUES_REQUEST,
+ RF_PROG_VALUES_REQUEST,
+ WAKEUP_SLEEP_REQUEST,
+ SCAN_REQUEST,
+ TSF_UPDATE,
+ PEER_NOTIFY,
+ BLOCK_UNBLOCK,
+ SET_KEY_REQ,
+ AUTO_RATE_IND,
+ BOOTUP_PARAMS_REQUEST,
+ VAP_CAPABILITIES,
+ EEPROM_READ_TYPE ,
+ EEPROM_WRITE,
+ GPIO_PIN_CONFIG ,
+ SET_RX_FILTER,
+ AMPDU_IND,
+ STATS_REQUEST_FRAME,
+ BB_BUF_PROG_VALUES_REQ,
+ BBP_PROG_IN_TA,
+ BG_SCAN_PARAMS,
+ BG_SCAN_PROBE_REQ,
+ CW_MODE_REQ,
+ PER_CMD_PKT
+};
+
+struct rsi_mac_frame {
+ __le16 desc_word[8];
+} __packed;
+
+struct rsi_boot_params {
+ __le16 desc_word[8];
+ struct bootup_params bootup_params;
+} __packed;
+
+struct rsi_peer_notify {
+ __le16 desc_word[8];
+ u8 mac_addr[6];
+ __le16 command;
+ __le16 mpdu_density;
+ __le16 reserved;
+ __le32 sta_flags;
+} __packed;
+
+struct rsi_vap_caps {
+ __le16 desc_word[8];
+ u8 mac_addr[6];
+ __le16 keep_alive_period;
+ u8 bssid[6];
+ __le16 reserved;
+ __le32 flags;
+ __le16 frag_threshold;
+ __le16 rts_threshold;
+ __le32 default_mgmt_rate;
+ __le32 default_ctrl_rate;
+ __le32 default_data_rate;
+ __le16 beacon_interval;
+ __le16 dtim_period;
+} __packed;
+
+struct rsi_set_key {
+ __le16 desc_word[8];
+ u8 key[4][32];
+ u8 tx_mic_key[8];
+ u8 rx_mic_key[8];
+} __packed;
+
+struct rsi_auto_rate {
+ __le16 desc_word[8];
+ __le16 failure_limit;
+ __le16 initial_boundary;
+ __le16 max_threshold_limt;
+ __le16 num_supported_rates;
+ __le16 aarf_rssi;
+ __le16 moderate_rate_inx;
+ __le16 collision_tolerance;
+ __le16 supported_rates[40];
+} __packed;
+
+struct qos_params {
+ __le16 cont_win_min_q;
+ __le16 cont_win_max_q;
+ __le16 aifsn_val_q;
+ __le16 txop_q;
+} __packed;
+
+struct rsi_radio_caps {
+ __le16 desc_word[8];
+ struct qos_params qos_params[MAX_HW_QUEUES];
+ u8 num_11n_rates;
+ u8 num_11ac_rates;
+ __le16 gcpd_per_rate[20];
+} __packed;
+
+static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
+{
+ return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12;
+}
+
+static inline u32 rsi_get_length(u8 *addr, u16 offset)
+{
+ return (le16_to_cpu(*(__le16 *)&addr[offset])) & 0x0fff;
+}
+
+static inline u8 rsi_get_extended_desc(u8 *addr, u16 offset)
+{
+ return le16_to_cpu(*((__le16 *)&addr[offset + 4])) & 0x00ff;
+}
+
+static inline u8 rsi_get_rssi(u8 *addr)
+{
+ return *(u8 *)(addr + FRAME_DESC_SZ);
+}
+
+static inline u8 rsi_get_channel(u8 *addr)
+{
+ return *(char *)(addr + 15);
+}
+
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode);
+int rsi_send_aggregation_params_frame(struct rsi_common *common, u16 tid,
+ u16 ssn, u8 buf_size, u8 event);
+int rsi_hal_load_key(struct rsi_common *common, u8 *data, u16 key_len,
+ u8 key_type, u8 key_id, u32 cipher);
+int rsi_set_channel(struct rsi_common *common, u16 chno);
+void rsi_inform_bss_status(struct rsi_common *common, u8 status,
+ const u8 *bssid, u8 qos_enable, u16 aid);
+void rsi_indicate_pkt_to_os(struct rsi_common *common, struct sk_buff *skb);
+int rsi_mac80211_attach(struct rsi_common *common);
+void rsi_indicate_tx_status(struct rsi_hw *common, struct sk_buff *skb,
+ int status);
+bool rsi_is_cipher_wep(struct rsi_common *common);
+void rsi_core_qos_processor(struct rsi_common *common);
+void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_mgmt_pkt(struct rsi_common *common, struct sk_buff *skb);
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb);
+#endif
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 03/11] rsi: Adding core and main files.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
2014-03-10 15:26 ` [PATCH v4 01/11] rsi: Adding RS9113 driver header files fariyaf
2014-03-10 15:26 ` [PATCH v4 02/11] rsi: Adding remaining " fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 04/11] rsi: Writing packets to device and debugfs fariyaf
` (9 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch adds the files which contain functionality related
to initialization, queuing and de-queuing of packets to be
sent to the device, sending and receiving packets from the
device and OS interface operations.
---
drivers/net/wireless/rsi/rsi_91x_core.c | 342 +++++++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_91x_main.c | 270 ++++++++++++++++++++++++
2 files changed, 612 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_core.c
create mode 100644 drivers/net/wireless/rsi/rsi_91x_main.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c
new file mode 100644
index 0000000..e89535e
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_core.c
@@ -0,0 +1,342 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_determine_min_weight_queue() - This function determines the queue with
+ * the min weight.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number.
+ */
+static u8 rsi_determine_min_weight_queue(struct rsi_common *common)
+{
+ struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+ u32 q_len = 0;
+ u8 ii = 0;
+
+ for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+ q_len = skb_queue_len(&common->tx_queue[ii]);
+ if ((tx_qinfo[ii].pkt_contended) && q_len) {
+ common->min_weight = tx_qinfo[ii].weight;
+ break;
+ }
+ }
+ return ii;
+}
+
+/**
+ * rsi_recalculate_weights() - This function recalculates the weights
+ * corresponding to each queue.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: recontend_queue bool variable
+ */
+static bool rsi_recalculate_weights(struct rsi_common *common)
+{
+ struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+ bool recontend_queue = false;
+ u8 ii = 0;
+ u32 q_len = 0;
+
+ for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+ q_len = skb_queue_len(&common->tx_queue[ii]);
+ /* Check for the need of contention */
+ if (q_len) {
+ if (tx_qinfo[ii].pkt_contended) {
+ tx_qinfo[ii].weight =
+ ((tx_qinfo[ii].weight > common->min_weight) ?
+ tx_qinfo[ii].weight - common->min_weight : 0);
+ } else {
+ tx_qinfo[ii].pkt_contended = 1;
+ tx_qinfo[ii].weight = tx_qinfo[ii].wme_params;
+ recontend_queue = true;
+ }
+ } else { /* No packets so no contention */
+ tx_qinfo[ii].weight = 0;
+ tx_qinfo[ii].pkt_contended = 0;
+ }
+ }
+
+ return recontend_queue;
+}
+
+/**
+ * rsi_core_determine_hal_queue() - This function determines the queue from
+ * which packet has to be dequeued.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number on success.
+ */
+static u8 rsi_core_determine_hal_queue(struct rsi_common *common)
+{
+ bool recontend_queue = false;
+ u32 q_len = 0;
+ u8 q_num = INVALID_QUEUE;
+ u8 ii, min = 0;
+
+ if (skb_queue_len(&common->tx_queue[MGMT_SOFT_Q])) {
+ if (!common->mgmt_q_block)
+ q_num = MGMT_SOFT_Q;
+ return q_num;
+ }
+
+ if (common->pkt_cnt != 0) {
+ --common->pkt_cnt;
+ return common->selected_qnum;
+ }
+
+get_queue_num:
+ q_num = 0;
+ recontend_queue = false;
+
+ q_num = rsi_determine_min_weight_queue(common);
+ q_len = skb_queue_len(&common->tx_queue[ii]);
+ ii = q_num;
+
+ /* Selecting the queue with least back off */
+ for (; ii < NUM_EDCA_QUEUES; ii++) {
+ if (((common->tx_qinfo[ii].pkt_contended) &&
+ (common->tx_qinfo[ii].weight < min)) && q_len) {
+ min = common->tx_qinfo[ii].weight;
+ q_num = ii;
+ }
+ }
+
+ common->tx_qinfo[q_num].pkt_contended = 0;
+ /* Adjust the back off values for all queues again */
+ recontend_queue = rsi_recalculate_weights(common);
+
+ q_len = skb_queue_len(&common->tx_queue[q_num]);
+ if (!q_len) {
+ /* If any queues are freshly contended and the selected queue
+ * doesn't have any packets
+ * then get the queue number again with fresh values
+ */
+ if (recontend_queue)
+ goto get_queue_num;
+
+ q_num = INVALID_QUEUE;
+ return q_num;
+ }
+
+ common->selected_qnum = q_num;
+ q_len = skb_queue_len(&common->tx_queue[q_num]);
+
+ switch (common->selected_qnum) {
+ case VO_Q:
+ if (q_len > MAX_CONTINUOUS_VO_PKTS)
+ common->pkt_cnt = (MAX_CONTINUOUS_VO_PKTS - 1);
+ else
+ common->pkt_cnt = --q_len;
+ break;
+
+ case VI_Q:
+ if (q_len > MAX_CONTINUOUS_VI_PKTS)
+ common->pkt_cnt = (MAX_CONTINUOUS_VI_PKTS - 1);
+ else
+ common->pkt_cnt = --q_len;
+
+ break;
+
+ default:
+ common->pkt_cnt = 0;
+ break;
+ }
+
+ return q_num;
+}
+
+/**
+ * rsi_core_queue_pkt() - This functions enqueues the packet to the queue
+ * specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+static void rsi_core_queue_pkt(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ u8 q_num = skb->priority;
+ if (q_num >= NUM_SOFT_QUEUES) {
+ rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+ __func__, q_num);
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ skb_queue_tail(&common->tx_queue[q_num], skb);
+}
+
+/**
+ * rsi_core_dequeue_pkt() - This functions dequeues the packet from the queue
+ * specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @q_num: Queue number.
+ *
+ * Return: Pointer to sk_buff structure.
+ */
+static struct sk_buff *rsi_core_dequeue_pkt(struct rsi_common *common,
+ u8 q_num)
+{
+ if (q_num >= NUM_SOFT_QUEUES) {
+ rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+ __func__, q_num);
+ return NULL;
+ }
+
+ return skb_dequeue(&common->tx_queue[q_num]);
+}
+
+/**
+ * rsi_core_qos_processor() - This function is used to determine the wmm queue
+ * based on the backoff procedure. Data packets are
+ * dequeued from the selected hal queue and sent to
+ * the below layers.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_core_qos_processor(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct sk_buff *skb;
+ unsigned long tstamp_1, tstamp_2;
+ u8 q_num;
+ int status;
+
+ tstamp_1 = jiffies;
+ while (1) {
+ q_num = rsi_core_determine_hal_queue(common);
+ rsi_dbg(DATA_TX_ZONE,
+ "%s: Queue number = %d\n", __func__, q_num);
+
+ if (q_num == INVALID_QUEUE) {
+ rsi_dbg(DATA_TX_ZONE, "%s: No More Pkt\n", __func__);
+ break;
+ }
+
+ mutex_lock(&common->tx_rxlock);
+
+ status = adapter->check_hw_queue_status(adapter, q_num);
+ if ((status <= 0)) {
+ mutex_unlock(&common->tx_rxlock);
+ break;
+ }
+
+ if ((q_num < MGMT_SOFT_Q) &&
+ ((skb_queue_len(&common->tx_queue[q_num])) <=
+ MIN_DATA_QUEUE_WATER_MARK)) {
+ if (ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+ ieee80211_wake_queue(adapter->hw,
+ WME_AC(q_num));
+ }
+
+ skb = rsi_core_dequeue_pkt(common, q_num);
+ if (skb == NULL) {
+ mutex_unlock(&common->tx_rxlock);
+ break;
+ }
+
+ if (q_num == MGMT_SOFT_Q)
+ status = rsi_send_mgmt_pkt(common, skb);
+ else
+ status = rsi_send_data_pkt(common, skb);
+
+ if (status) {
+ mutex_unlock(&common->tx_rxlock);
+ break;
+ }
+
+ common->tx_stats.total_tx_pkt_send[q_num]++;
+
+ tstamp_2 = jiffies;
+ mutex_unlock(&common->tx_rxlock);
+
+ if (tstamp_2 > tstamp_1 + (300 * HZ / 1000))
+ schedule();
+ }
+}
+
+/**
+ * rsi_core_xmit() - This function transmits the packets received from mac80211
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_tx_info *info;
+ struct skb_info *tx_params;
+ struct ieee80211_hdr *tmp_hdr = NULL;
+ u8 q_num, tid = 0;
+
+ if ((!skb) || (!skb->len)) {
+ rsi_dbg(ERR_ZONE, "%s: Null skb/zero Length packet\n",
+ __func__);
+ goto xmit_fail;
+ }
+ info = IEEE80211_SKB_CB(skb);
+ tx_params = (struct skb_info *)info->driver_data;
+ tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+
+ if (common->fsm_state != FSM_MAC_INIT_DONE) {
+ rsi_dbg(ERR_ZONE, "%s: FSM state not open\n", __func__);
+ goto xmit_fail;
+ }
+
+ if ((ieee80211_is_mgmt(tmp_hdr->frame_control)) ||
+ (ieee80211_is_ctl(tmp_hdr->frame_control))) {
+ q_num = MGMT_SOFT_Q;
+ skb->priority = q_num;
+ } else {
+ if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+ tid = (skb->data[24] & IEEE80211_QOS_TID);
+ skb->priority = TID_TO_WME_AC(tid);
+ } else {
+ tid = IEEE80211_NONQOS_TID;
+ skb->priority = BE_Q;
+ }
+ q_num = skb->priority;
+ tx_params->tid = tid;
+ tx_params->sta_id = 0;
+ }
+
+ if ((q_num != MGMT_SOFT_Q) &&
+ ((skb_queue_len(&common->tx_queue[q_num]) + 1) >=
+ DATA_QUEUE_WATER_MARK)) {
+ if (!ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+ ieee80211_stop_queue(adapter->hw, WME_AC(q_num));
+ rsi_set_event(&common->tx_thread.event);
+ goto xmit_fail;
+ }
+
+ rsi_core_queue_pkt(common, skb);
+ rsi_dbg(DATA_TX_ZONE, "%s: ===> Scheduling TX thead <===\n", __func__);
+ rsi_set_event(&common->tx_thread.event);
+
+ return;
+
+xmit_fail:
+ rsi_dbg(ERR_ZONE, "%s: Failed to queue packet\n", __func__);
+ /* Dropping pkt here */
+ ieee80211_free_txskb(common->priv->hw, skb);
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_main.c b/drivers/net/wireless/rsi/rsi_91x_main.c
new file mode 100644
index 0000000..066948b
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_main.c
@@ -0,0 +1,270 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+u32 rsi_zone_enabled = /* INFO_ZONE |
+ INIT_ZONE |
+ MGMT_TX_ZONE |
+ MGMT_RX_ZONE |
+ DATA_TX_ZONE |
+ DATA_RX_ZONE |
+ FSM_ZONE |
+ ISR_ZONE | */
+ ERR_ZONE |
+ 0;
+EXPORT_SYMBOL_GPL(rsi_zone_enabled);
+
+/**
+ * rsi_prepare_skb() - This function prepares the skb.
+ * @common: Pointer to the driver private structure.
+ * @buffer: Pointer to the packet data.
+ * @pkt_len: Length of the packet.
+ * @extended_desc: Extended descriptor.
+ *
+ * Return: Successfully skb.
+ */
+static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
+ u8 *buffer,
+ u32 pkt_len,
+ u8 extended_desc)
+{
+ struct ieee80211_tx_info *info;
+ struct skb_info *rx_params;
+ struct sk_buff *skb = NULL;
+ u8 payload_offset;
+
+ if (WARN(!pkt_len, "%s: Dummy pkt received", __func__))
+ return NULL;
+
+ if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
+ rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n",
+ __func__, pkt_len);
+ pkt_len = RSI_RCV_BUFFER_LEN * 4;
+ }
+
+ pkt_len -= extended_desc;
+ skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
+ if (skb == NULL)
+ return NULL;
+
+ payload_offset = (extended_desc + FRAME_DESC_SZ);
+ skb_put(skb, pkt_len);
+ memcpy((skb->data), (buffer + payload_offset), skb->len);
+
+ info = IEEE80211_SKB_CB(skb);
+ rx_params = (struct skb_info *)info->driver_data;
+ rx_params->rssi = rsi_get_rssi(buffer);
+ rx_params->channel = rsi_get_connected_channel(common->priv);
+
+ return skb;
+}
+
+/**
+ * rsi_read_pkt() - This function reads frames from the card.
+ * @common: Pointer to the driver private structure.
+ * @rcv_pkt_len: Received pkt length. In case of USB it is 0.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_read_pkt(struct rsi_common *common, s32 rcv_pkt_len)
+{
+ u8 *frame_desc = NULL, extended_desc = 0;
+ u32 index, length = 0, queueno = 0;
+ u16 actual_length = 0, offset;
+ struct sk_buff *skb = NULL;
+
+ index = 0;
+ do {
+ frame_desc = &common->rx_data_pkt[index];
+ actual_length = *(u16 *)&frame_desc[0];
+ offset = *(u16 *)&frame_desc[2];
+
+ queueno = rsi_get_queueno(frame_desc, offset);
+ length = rsi_get_length(frame_desc, offset);
+ extended_desc = rsi_get_extended_desc(frame_desc, offset);
+
+ switch (queueno) {
+ case RSI_WIFI_DATA_Q:
+ skb = rsi_prepare_skb(common,
+ (frame_desc + offset),
+ length,
+ extended_desc);
+ if (skb == NULL)
+ goto fail;
+
+ rsi_indicate_pkt_to_os(common, skb);
+ break;
+
+ case RSI_WIFI_MGMT_Q:
+ rsi_mgmt_pkt_recv(common, (frame_desc + offset));
+ break;
+
+ default:
+ rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
+ __func__, queueno);
+ goto fail;
+ }
+
+ index += actual_length;
+ rcv_pkt_len -= actual_length;
+ } while (rcv_pkt_len > 0);
+
+ return 0;
+fail:
+ return -1;
+}
+EXPORT_SYMBOL_GPL(rsi_read_pkt);
+
+/**
+ * rsi_tx_scheduler_thread() - This function is a kernel thread to send the
+ * packets to the device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+static void rsi_tx_scheduler_thread(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ u32 timeout = EVENT_WAIT_FOREVER;
+
+ do {
+ if (adapter->determine_event_timeout)
+ timeout = adapter->determine_event_timeout(adapter);
+ rsi_wait_event(&common->tx_thread.event, timeout);
+ rsi_reset_event(&common->tx_thread.event);
+
+ if (common->init_done)
+ rsi_core_qos_processor(common);
+ } while (atomic_read(&common->tx_thread.thread_done) == 0);
+ complete_and_exit(&common->tx_thread.completion, 0);
+}
+
+/**
+ * rsi_91x_init() - This function initializes os interface operations.
+ * @void: Void.
+ *
+ * Return: Pointer to the adapter structure on success, NULL on failure .
+ */
+struct rsi_hw *rsi_91x_init(void)
+{
+ struct rsi_hw *adapter = NULL;
+ struct rsi_common *common = NULL;
+ u8 ii = 0;
+
+ adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+ if (!adapter)
+ return NULL;
+
+ adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL);
+ if (adapter->priv == NULL) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n",
+ __func__);
+ kfree(adapter);
+ return NULL;
+ } else {
+ common = adapter->priv;
+ common->priv = adapter;
+ }
+
+ for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
+ skb_queue_head_init(&common->tx_queue[ii]);
+
+ rsi_init_event(&common->tx_thread.event);
+ mutex_init(&common->mutex);
+ mutex_init(&common->tx_rxlock);
+
+ if (rsi_create_kthread(common,
+ &common->tx_thread,
+ rsi_tx_scheduler_thread,
+ "Tx-Thread")) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
+ goto err;
+ }
+
+ common->init_done = true;
+ return adapter;
+
+err:
+ kfree(common);
+ kfree(adapter);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(rsi_91x_init);
+
+/**
+ * rsi_91x_deinit() - This function de-intializes os intf operations.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_91x_deinit(struct rsi_hw *adapter)
+{
+ struct rsi_common *common = adapter->priv;
+ u8 ii;
+
+ rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__);
+
+ rsi_kill_thread(&common->tx_thread);
+
+ for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
+ skb_queue_purge(&common->tx_queue[ii]);
+
+ common->init_done = false;
+
+ kfree(common);
+ kfree(adapter->rsi_dev);
+ kfree(adapter);
+}
+EXPORT_SYMBOL_GPL(rsi_91x_deinit);
+
+/**
+ * rsi_91x_hal_module_init() - This function is invoked when the module is
+ * loaded into the kernel.
+ * It registers the client driver.
+ * @void: Void.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_91x_hal_module_init(void)
+{
+ rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_91x_hal_module_exit() - This function is called at the time of
+ * removing/unloading the module.
+ * It unregisters the client driver.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_91x_hal_module_exit(void)
+{
+ rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
+}
+
+module_init(rsi_91x_hal_module_init);
+module_exit(rsi_91x_hal_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Station driver for RSI 91x devices");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 04/11] rsi: Writing packets to device and debugfs.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (2 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 03/11] rsi: Adding core and main files fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 05/11] rsi: MAC80211 callbacks to driver fariyaf
` (8 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch adds the files relating to debugfs and relating to writing packets to device.
---
drivers/net/wireless/rsi/rsi_91x_debugfs.c | 339 ++++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_91x_pkt.c | 195 ++++++++++++++++
2 files changed, 534 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_debugfs.c
create mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_debugfs.c b/drivers/net/wireless/rsi/rsi_91x_debugfs.c
new file mode 100644
index 0000000..7e4ef45
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_debugfs.c
@@ -0,0 +1,339 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_debugfs.h"
+#include "rsi_sdio.h"
+
+/**
+ * rsi_sdio_stats_read() - This function returns the sdio status of the driver.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_stats_read(struct seq_file *seq, void *data)
+{
+ struct rsi_common *common = seq->private;
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+ seq_printf(seq, "total_sdio_interrupts: %d\n",
+ dev->rx_info.sdio_int_counter);
+ seq_printf(seq, "sdio_msdu_pending_intr_count: %d\n",
+ dev->rx_info.total_sdio_msdu_pending_intr);
+ seq_printf(seq, "sdio_buff_full_count : %d\n",
+ dev->rx_info.buf_full_counter);
+ seq_printf(seq, "sdio_buf_semi_full_count %d\n",
+ dev->rx_info.buf_semi_full_counter);
+ seq_printf(seq, "sdio_unknown_intr_count: %d\n",
+ dev->rx_info.total_sdio_unknown_intr);
+ /* RX Path Stats */
+ seq_printf(seq, "BUFFER FULL STATUS : %d\n",
+ dev->rx_info.buffer_full);
+ seq_printf(seq, "SEMI BUFFER FULL STATUS : %d\n",
+ dev->rx_info.semi_buffer_full);
+ seq_printf(seq, "MGMT BUFFER FULL STATUS : %d\n",
+ dev->rx_info.mgmt_buffer_full);
+ seq_printf(seq, "BUFFER FULL COUNTER : %d\n",
+ dev->rx_info.buf_full_counter);
+ seq_printf(seq, "BUFFER SEMI FULL COUNTER : %d\n",
+ dev->rx_info.buf_semi_full_counter);
+ seq_printf(seq, "MGMT BUFFER FULL COUNTER : %d\n",
+ dev->rx_info.mgmt_buf_full_counter);
+
+ return 0;
+}
+
+/**
+ * rsi_sdio_stats_open() - This funtion calls single open function of seq_file
+ * to open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_sdio_stats_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, rsi_sdio_stats_read, inode->i_private);
+}
+
+/**
+ * rsi_version_read() - This function gives driver and firmware version number.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_version_read(struct seq_file *seq, void *data)
+{
+ struct rsi_common *common = seq->private;
+
+ common->driver_ver.major = 0;
+ common->driver_ver.minor = 1;
+ common->driver_ver.release_num = 0;
+ common->driver_ver.patch_num = 0;
+ seq_printf(seq, "Driver : %x.%d.%d.%d\nLMAC : %d.%d.%d.%d\n",
+ common->driver_ver.major,
+ common->driver_ver.minor,
+ common->driver_ver.release_num,
+ common->driver_ver.patch_num,
+ common->fw_ver.major,
+ common->fw_ver.minor,
+ common->fw_ver.release_num,
+ common->fw_ver.patch_num);
+ return 0;
+}
+
+/**
+ * rsi_version_open() - This funtion calls single open function of seq_file to
+ * open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_version_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, rsi_version_read, inode->i_private);
+}
+
+/**
+ * rsi_stats_read() - This function return the status of the driver.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_stats_read(struct seq_file *seq, void *data)
+{
+ struct rsi_common *common = seq->private;
+
+ unsigned char fsm_state[][32] = {
+ "FSM_CARD_NOT_READY",
+ "FSM_BOOT_PARAMS_SENT",
+ "FSM_EEPROM_READ_MAC_ADDR",
+ "FSM_RESET_MAC_SENT",
+ "FSM_RADIO_CAPS_SENT",
+ "FSM_BB_RF_PROG_SENT",
+ "FSM_MAC_INIT_DONE"
+ };
+ seq_puts(seq, "==> RSI STA DRIVER STATUS <==\n");
+ seq_puts(seq, "DRIVER_FSM_STATE: ");
+
+ if (common->fsm_state <= FSM_MAC_INIT_DONE)
+ seq_printf(seq, "%s", fsm_state[common->fsm_state]);
+
+ seq_printf(seq, "(%d)\n\n", common->fsm_state);
+
+ /* Mgmt TX Path Stats */
+ seq_printf(seq, "total_mgmt_pkt_send : %d\n",
+ common->tx_stats.total_tx_pkt_send[MGMT_SOFT_Q]);
+ seq_printf(seq, "total_mgmt_pkt_queued : %d\n",
+ skb_queue_len(&common->tx_queue[4]));
+ seq_printf(seq, "total_mgmt_pkt_freed : %d\n",
+ common->tx_stats.total_tx_pkt_freed[MGMT_SOFT_Q]);
+
+ /* Data TX Path Stats */
+ seq_printf(seq, "total_data_vo_pkt_send: %8d\t",
+ common->tx_stats.total_tx_pkt_send[VO_Q]);
+ seq_printf(seq, "total_data_vo_pkt_queued: %8d\t",
+ skb_queue_len(&common->tx_queue[0]));
+ seq_printf(seq, "total_vo_pkt_freed: %8d\n",
+ common->tx_stats.total_tx_pkt_freed[VO_Q]);
+ seq_printf(seq, "total_data_vi_pkt_send: %8d\t",
+ common->tx_stats.total_tx_pkt_send[VI_Q]);
+ seq_printf(seq, "total_data_vi_pkt_queued: %8d\t",
+ skb_queue_len(&common->tx_queue[1]));
+ seq_printf(seq, "total_vi_pkt_freed: %8d\n",
+ common->tx_stats.total_tx_pkt_freed[VI_Q]);
+ seq_printf(seq, "total_data_be_pkt_send: %8d\t",
+ common->tx_stats.total_tx_pkt_send[BE_Q]);
+ seq_printf(seq, "total_data_be_pkt_queued: %8d\t",
+ skb_queue_len(&common->tx_queue[2]));
+ seq_printf(seq, "total_be_pkt_freed: %8d\n",
+ common->tx_stats.total_tx_pkt_freed[BE_Q]);
+ seq_printf(seq, "total_data_bk_pkt_send: %8d\t",
+ common->tx_stats.total_tx_pkt_send[BK_Q]);
+ seq_printf(seq, "total_data_bk_pkt_queued: %8d\t",
+ skb_queue_len(&common->tx_queue[3]));
+ seq_printf(seq, "total_bk_pkt_freed: %8d\n",
+ common->tx_stats.total_tx_pkt_freed[BK_Q]);
+
+ seq_puts(seq, "\n");
+ return 0;
+}
+
+/**
+ * rsi_stats_open() - This funtion calls single open function of seq_file to
+ * open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_stats_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, rsi_stats_read, inode->i_private);
+}
+
+/**
+ * rsi_debug_zone_read() - This function display the currently enabled debug zones.
+ * @seq: Pointer to the sequence file structure.
+ * @data: Pointer to the data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_debug_zone_read(struct seq_file *seq, void *data)
+{
+ rsi_dbg(FSM_ZONE, "%x: rsi_enabled zone", rsi_zone_enabled);
+ seq_printf(seq, "The zones available are %#x\n",
+ rsi_zone_enabled);
+ return 0;
+}
+
+/**
+ * rsi_debug_read() - This funtion calls single open function of seq_file to
+ * open file and read contents from it.
+ * @inode: Pointer to the inode structure.
+ * @file: Pointer to the file structure.
+ *
+ * Return: Pointer to the opened file status: 0 on success, ENOMEM on failure.
+ */
+static int rsi_debug_read(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, rsi_debug_zone_read, inode->i_private);
+}
+
+/**
+ * rsi_debug_zone_write() - This function writes into hal queues as per user
+ * requirement.
+ * @filp: Pointer to the file structure.
+ * @buff: Pointer to the character buffer.
+ * @len: Length of the data to be written into buffer.
+ * @data: Pointer to the data.
+ *
+ * Return: len: Number of bytes read.
+ */
+static ssize_t rsi_debug_zone_write(struct file *filp,
+ const char __user *buff,
+ size_t len,
+ loff_t *data)
+{
+ unsigned long dbg_zone;
+ int ret;
+
+ if (!len)
+ return 0;
+
+ ret = kstrtoul_from_user(buff, len, 16, &dbg_zone);
+
+ if (ret)
+ return ret;
+
+ rsi_zone_enabled = dbg_zone;
+ return len;
+}
+
+#define FOPS(fopen) { \
+ .owner = THIS_MODULE, \
+ .open = (fopen), \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+}
+
+#define FOPS_RW(fopen, fwrite) { \
+ .owner = THIS_MODULE, \
+ .open = (fopen), \
+ .read = seq_read, \
+ .llseek = seq_lseek, \
+ .write = (fwrite), \
+}
+
+static const struct rsi_dbg_files dev_debugfs_files[] = {
+ {"version", 0644, FOPS(rsi_version_open),},
+ {"stats", 0644, FOPS(rsi_stats_open),},
+ {"debug_zone", 0666, FOPS_RW(rsi_debug_read, rsi_debug_zone_write),},
+ {"sdio_stats", 0644, FOPS(rsi_sdio_stats_open),},
+};
+
+/**
+ * rsi_init_dbgfs() - This function initializes the dbgfs entry.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_init_dbgfs(struct rsi_hw *adapter)
+{
+ struct rsi_common *common = adapter->priv;
+ struct rsi_debugfs *dev_dbgfs;
+ char devdir[6];
+ int ii;
+ const struct rsi_dbg_files *files;
+
+ dev_dbgfs = kzalloc(sizeof(*dev_dbgfs), GFP_KERNEL);
+ adapter->dfsentry = dev_dbgfs;
+
+ snprintf(devdir, sizeof(devdir), "%s",
+ wiphy_name(adapter->hw->wiphy));
+ dev_dbgfs->subdir = debugfs_create_dir(devdir, NULL);
+
+ if (IS_ERR(dev_dbgfs->subdir)) {
+ if (dev_dbgfs->subdir == ERR_PTR(-ENODEV))
+ rsi_dbg(ERR_ZONE,
+ "%s:Debugfs has not been mounted\n", __func__);
+ else
+ rsi_dbg(ERR_ZONE, "debugfs:%s not created\n", devdir);
+
+ adapter->dfsentry = NULL;
+ kfree(dev_dbgfs);
+ return (int)PTR_ERR(dev_dbgfs->subdir);
+ } else {
+ for (ii = 0; ii < adapter->num_debugfs_entries; ii++) {
+ files = &dev_debugfs_files[ii];
+ dev_dbgfs->rsi_files[ii] =
+ debugfs_create_file(files->name,
+ files->perms,
+ dev_dbgfs->subdir,
+ common,
+ &files->fops);
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rsi_init_dbgfs);
+
+/**
+ * rsi_remove_dbgfs() - Removes the previously created dbgfs file entries
+ * in the reverse order of creation.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_remove_dbgfs(struct rsi_hw *adapter)
+{
+ struct rsi_debugfs *dev_dbgfs = adapter->dfsentry;
+
+ if (!dev_dbgfs)
+ return;
+
+ debugfs_remove_recursive(dev_dbgfs->subdir);
+}
+EXPORT_SYMBOL_GPL(rsi_remove_dbgfs);
diff --git a/drivers/net/wireless/rsi/rsi_91x_pkt.c b/drivers/net/wireless/rsi/rsi_91x_pkt.c
new file mode 100644
index 0000000..717bef1
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_pkt.c
@@ -0,0 +1,195 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+
+/**
+ * rsi_send_data_pkt() - This function sends the recieved data packet from
+ * driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *tmp_hdr = NULL;
+ struct ieee80211_tx_info *info;
+ struct skb_info *tx_params;
+ struct ieee80211_bss_conf *bss = NULL;
+ int status = -EINVAL;
+ u8 ieee80211_size = MIN_802_11_HDR_LEN;
+ u8 extnd_size = 0;
+ __le16 *frame_desc;
+ u16 seq_num = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ bss = &info->control.vif->bss_conf;
+ tx_params = (struct skb_info *)info->driver_data;
+
+ if (!bss->assoc)
+ goto err;
+
+ tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+ seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
+
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ goto err;
+ }
+
+ skb_push(skb, (FRAME_DESC_SZ + extnd_size));
+ frame_desc = (__le16 *)&skb->data[0];
+ memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
+
+ if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+ ieee80211_size += 2;
+ frame_desc[6] |= cpu_to_le16(BIT(12));
+ }
+
+ if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
+ (common->secinfo.security_enable)) {
+ if (rsi_is_cipher_wep(common))
+ ieee80211_size += 4;
+ else
+ ieee80211_size += 8;
+ frame_desc[6] |= cpu_to_le16(BIT(15));
+ }
+
+ frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_DATA_Q << 12));
+ frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
+
+ if (common->min_rate != 0xffff) {
+ /* Send fixed rate */
+ frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ frame_desc[4] = cpu_to_le16(common->min_rate);
+ }
+
+ frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
+ frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
+ (skb->priority & 0xf) |
+ (tx_params->sta_id << 8));
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ skb->data,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
+ __func__);
+
+err:
+ ++common->tx_stats.total_tx_pkt_freed[skb->priority];
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
+
+/**
+ * rsi_send_mgmt_pkt() - This functions sends the received management packet
+ * from driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_mgmt_pkt(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *wh = NULL;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_bss_conf *bss = NULL;
+ struct skb_info *tx_params;
+ int status = -E2BIG;
+ __le16 *msg = NULL;
+ u8 extnd_size = 0;
+ u8 vap_id = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ tx_params = (struct skb_info *)info->driver_data;
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if (tx_params->flags & INTERNAL_MGMT_PKT) {
+ if ((extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ dev_kfree_skb(skb);
+ return -1;
+ }
+ skb_push(skb, extnd_size);
+ skb->data[extnd_size + 4] = extnd_size;
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)skb->data,
+ skb->len);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write the packet\n", __func__);
+ }
+ dev_kfree_skb(skb);
+ return status;
+ }
+
+ bss = &info->control.vif->bss_conf;
+ wh = (struct ieee80211_hdr *)&skb->data[0];
+
+ if (FRAME_DESC_SZ > skb_headroom(skb))
+ goto err;
+
+ skb_push(skb, FRAME_DESC_SZ);
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ msg = (__le16 *)skb->data;
+
+ if (skb->len > MAX_MGMT_PKT_SIZE) {
+ rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
+ goto err;
+ }
+
+ msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ msg[1] = cpu_to_le16(TX_DOT11_MGMT);
+ msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
+ msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
+
+ if (wh->addr1[0] & BIT(0))
+ msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
+
+ if (common->band == IEEE80211_BAND_2GHZ)
+ msg[4] = cpu_to_le16(RSI_11B_MODE);
+ else
+ msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
+
+ /* Indicate to firmware to give cfm */
+ if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
+ msg[1] |= cpu_to_le16(BIT(10));
+ msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
+ common->mgmt_q_block = true;
+ }
+
+ msg[7] |= cpu_to_le16(vap_id << 8);
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)msg,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
+
+err:
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 05/11] rsi: MAC80211 callbacks to driver.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (3 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 04/11] rsi: Writing packets to device and debugfs fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 06/11] rsi: MAC80211 callbacks and management functions internal to device fariyaf
` (7 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch has MAC80211 callbacks to driver.
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 689 +++++++++++++++++++++++++++
1 files changed, 689 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_mac80211.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
new file mode 100644
index 0000000..a82fdc0
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -0,0 +1,689 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include "rsi_debugfs.h"
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+static const struct ieee80211_channel rsi_2ghz_channels[] = {
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2412,
+ .hw_value = 1 }, /* Channel 1 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2417,
+ .hw_value = 2 }, /* Channel 2 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2422,
+ .hw_value = 3 }, /* Channel 3 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2427,
+ .hw_value = 4 }, /* Channel 4 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2432,
+ .hw_value = 5 }, /* Channel 5 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2437,
+ .hw_value = 6 }, /* Channel 6 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2442,
+ .hw_value = 7 }, /* Channel 7 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2447,
+ .hw_value = 8 }, /* Channel 8 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2452,
+ .hw_value = 9 }, /* Channel 9 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2457,
+ .hw_value = 10 }, /* Channel 10 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2462,
+ .hw_value = 11 }, /* Channel 11 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2467,
+ .hw_value = 12 }, /* Channel 12 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2472,
+ .hw_value = 13 }, /* Channel 13 */
+ { .band = IEEE80211_BAND_2GHZ, .center_freq = 2484,
+ .hw_value = 14 }, /* Channel 14 */
+};
+
+static const struct ieee80211_channel rsi_5ghz_channels[] = {
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5180,
+ .hw_value = 36, }, /* Channel 36 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5200,
+ .hw_value = 40, }, /* Channel 40 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5220,
+ .hw_value = 44, }, /* Channel 44 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5240,
+ .hw_value = 48, }, /* Channel 48 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5260,
+ .hw_value = 52, }, /* Channel 52 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5280,
+ .hw_value = 56, }, /* Channel 56 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5300,
+ .hw_value = 60, }, /* Channel 60 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5320,
+ .hw_value = 64, }, /* Channel 64 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5500,
+ .hw_value = 100, }, /* Channel 100 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5520,
+ .hw_value = 104, }, /* Channel 104 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5540,
+ .hw_value = 108, }, /* Channel 108 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5560,
+ .hw_value = 112, }, /* Channel 112 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5580,
+ .hw_value = 116, }, /* Channel 116 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5600,
+ .hw_value = 120, }, /* Channel 120 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5620,
+ .hw_value = 124, }, /* Channel 124 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5640,
+ .hw_value = 128, }, /* Channel 128 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5660,
+ .hw_value = 132, }, /* Channel 132 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5680,
+ .hw_value = 136, }, /* Channel 136 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5700,
+ .hw_value = 140, }, /* Channel 140 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5745,
+ .hw_value = 149, }, /* Channel 149 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5765,
+ .hw_value = 153, }, /* Channel 153 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5785,
+ .hw_value = 157, }, /* Channel 157 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5805,
+ .hw_value = 161, }, /* Channel 161 */
+ { .band = IEEE80211_BAND_5GHZ, .center_freq = 5825,
+ .hw_value = 165, }, /* Channel 165 */
+};
+
+struct ieee80211_rate rsi_rates[12] = {
+ { .bitrate = STD_RATE_01 * 5, .hw_value = RSI_RATE_1 },
+ { .bitrate = STD_RATE_02 * 5, .hw_value = RSI_RATE_2 },
+ { .bitrate = STD_RATE_5_5 * 5, .hw_value = RSI_RATE_5_5 },
+ { .bitrate = STD_RATE_11 * 5, .hw_value = RSI_RATE_11 },
+ { .bitrate = STD_RATE_06 * 5, .hw_value = RSI_RATE_6 },
+ { .bitrate = STD_RATE_09 * 5, .hw_value = RSI_RATE_9 },
+ { .bitrate = STD_RATE_12 * 5, .hw_value = RSI_RATE_12 },
+ { .bitrate = STD_RATE_18 * 5, .hw_value = RSI_RATE_18 },
+ { .bitrate = STD_RATE_24 * 5, .hw_value = RSI_RATE_24 },
+ { .bitrate = STD_RATE_36 * 5, .hw_value = RSI_RATE_36 },
+ { .bitrate = STD_RATE_48 * 5, .hw_value = RSI_RATE_48 },
+ { .bitrate = STD_RATE_54 * 5, .hw_value = RSI_RATE_54 },
+};
+
+const u16 rsi_mcsrates[8] = {
+ RSI_RATE_MCS0, RSI_RATE_MCS1, RSI_RATE_MCS2, RSI_RATE_MCS3,
+ RSI_RATE_MCS4, RSI_RATE_MCS5, RSI_RATE_MCS6, RSI_RATE_MCS7
+};
+
+/**
+ * rsi_is_cipher_wep() - This function determines if the cipher is WEP or not.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: If cipher type is WEP, a value of 1 is returned, else 0.
+ */
+
+bool rsi_is_cipher_wep(struct rsi_common *common)
+{
+ if (((common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP104) ||
+ (common->secinfo.gtk_cipher == WLAN_CIPHER_SUITE_WEP40)) &&
+ (!common->secinfo.ptk_cipher))
+ return true;
+ else
+ return false;
+}
+
+/**
+ * rsi_register_rates_channels() - This function registers channels and rates.
+ * @adapter: Pointer to the adapter structure.
+ * @band: Operating band to be set.
+ *
+ * Return: None.
+ */
+static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
+{
+ struct ieee80211_supported_band *sbands = &adapter->sbands[band];
+ void *channels = NULL;
+
+ if (band == IEEE80211_BAND_2GHZ) {
+ channels = kmalloc(sizeof(rsi_2ghz_channels), GFP_KERNEL);
+ memcpy(channels,
+ rsi_2ghz_channels,
+ sizeof(rsi_2ghz_channels));
+ sbands->band = IEEE80211_BAND_2GHZ;
+ sbands->n_channels = ARRAY_SIZE(rsi_2ghz_channels);
+ sbands->bitrates = rsi_rates;
+ sbands->n_bitrates = ARRAY_SIZE(rsi_rates);
+ } else {
+ channels = kmalloc(sizeof(rsi_5ghz_channels), GFP_KERNEL);
+ memcpy(channels,
+ rsi_5ghz_channels,
+ sizeof(rsi_5ghz_channels));
+ sbands->band = IEEE80211_BAND_5GHZ;
+ sbands->n_channels = ARRAY_SIZE(rsi_5ghz_channels);
+ sbands->bitrates = &rsi_rates[4];
+ sbands->n_bitrates = ARRAY_SIZE(rsi_rates) - 4;
+ }
+
+ sbands->channels = channels;
+
+ memset(&sbands->ht_cap, 0, sizeof(struct ieee80211_sta_ht_cap));
+ sbands->ht_cap.ht_supported = true;
+ sbands->ht_cap.cap = (IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_SGI_20 |
+ IEEE80211_HT_CAP_SGI_40);
+ sbands->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K;
+ sbands->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE;
+ sbands->ht_cap.mcs.rx_mask[0] = 0xff;
+ sbands->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ /* sbands->ht_cap.mcs.rx_highest = 0x82; */
+}
+
+/**
+ * rsi_mac80211_attach() - This function is used to de-initialize the
+ * Mac80211 stack.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_mac80211_detach(struct rsi_hw *adapter)
+{
+ struct ieee80211_hw *hw = adapter->hw;
+
+ if (hw) {
+ ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+ ieee80211_free_hw(hw);
+ }
+
+ rsi_remove_dbgfs(adapter);
+}
+EXPORT_SYMBOL_GPL(rsi_mac80211_detach);
+
+/**
+ * rsi_indicate_tx_status() - This function indicates the transmit status.
+ * @adapter: Pointer to the adapter structure.
+ * @skb: Pointer to the socket buffer structure.
+ * @status: Status
+ *
+ * Return: None.
+ */
+void rsi_indicate_tx_status(struct rsi_hw *adapter,
+ struct sk_buff *skb,
+ int status)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+ memset(info->driver_data, 0, IEEE80211_TX_INFO_DRIVER_DATA_SIZE);
+
+ if (!status)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ ieee80211_tx_status_irqsafe(adapter->hw, skb);
+}
+
+/**
+ * rsi_mac80211_tx() - This is the handler that 802.11 module calls for each
+ * transmitted frame.SKB contains the buffer starting
+ * from the IEEE 802.11 header.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @control: Pointer to the ieee80211_tx_control structure
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None
+ */
+static void rsi_mac80211_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ rsi_core_xmit(common, skb);
+}
+
+/**
+ * rsi_mac80211_start() - This is first handler that 802.11 module calls, since
+ * the driver init is complete by then, just
+ * returns success.
+ * @hw: Pointer to the ieee80211_hw structure.
+ *
+ * Return: 0 as success.
+ */
+static int rsi_mac80211_start(struct ieee80211_hw *hw)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ common->iface_down = false;
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+/**
+ * rsi_mac80211_stop() - This is the last handler that 802.11 module calls.
+ * @hw: Pointer to the ieee80211_hw structure.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_stop(struct ieee80211_hw *hw)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ common->iface_down = true;
+ mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_add_interface() - This function is called when a netdevice
+ * attached to the hardware is enabled.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ *
+ * Return: ret: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ int ret = -EOPNOTSUPP;
+
+ mutex_lock(&common->mutex);
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ if (!adapter->sc_nvifs) {
+ ++adapter->sc_nvifs;
+ adapter->vifs[0] = vif;
+ ret = rsi_set_vap_capabilities(common, STA_OPMODE);
+ }
+ break;
+ default:
+ rsi_dbg(ERR_ZONE,
+ "%s: Interface type %d not supported\n", __func__,
+ vif->type);
+ }
+ mutex_unlock(&common->mutex);
+
+ return ret;
+}
+
+/**
+ * rsi_mac80211_remove_interface() - This function notifies driver that an
+ * interface is going down.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ if (vif->type == NL80211_IFTYPE_STATION)
+ adapter->sc_nvifs--;
+
+ if (!memcmp(adapter->vifs[0], vif, sizeof(struct ieee80211_vif)))
+ adapter->vifs[0] = NULL;
+ mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_config() - This function is a handler for configuration
+ * requests. The stack calls this function to
+ * change hardware configuration, e.g., channel.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @changed: Changed flags set.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_config(struct ieee80211_hw *hw,
+ u32 changed)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ int status = -EOPNOTSUPP;
+
+ mutex_lock(&common->mutex);
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ struct ieee80211_channel *curchan = hw->conf.chandef.chan;
+ u16 channel = curchan->hw_value;
+
+ rsi_dbg(INFO_ZONE,
+ "%s: Set channel: %d MHz type: %d channel_no %d\n",
+ __func__, curchan->center_freq,
+ curchan->flags, channel);
+ common->band = curchan->band;
+ status = rsi_set_channel(adapter->priv, channel);
+ }
+ mutex_unlock(&common->mutex);
+
+ return status;
+}
+
+/**
+ * rsi_get_connected_channel() - This function is used to get the current
+ * connected channel number.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: Current connected AP's channel number is returned.
+ */
+u16 rsi_get_connected_channel(struct rsi_hw *adapter)
+{
+ struct ieee80211_vif *vif = adapter->vifs[0];
+ if (vif) {
+ struct ieee80211_bss_conf *bss = &vif->bss_conf;
+ struct ieee80211_channel *channel = bss->chandef.chan;
+ return channel->hw_value;
+ }
+
+ return 0;
+}
+
+/**
+ * rsi_mac80211_bss_info_changed() - This function is a handler for config
+ * requests related to BSS parameters that
+ * may vary during BSS's lifespan.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @bss_conf: Pointer to the ieee80211_bss_conf structure.
+ * @changed: Changed flags set.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changed)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ if (changed & BSS_CHANGED_ASSOC) {
+ rsi_dbg(INFO_ZONE, "%s: Changed Association status: %d\n",
+ __func__, bss_conf->assoc);
+ rsi_inform_bss_status(common,
+ bss_conf->assoc,
+ bss_conf->bssid,
+ bss_conf->qos,
+ bss_conf->aid);
+ }
+ mutex_unlock(&common->mutex);
+}
+
+/**
+ * rsi_mac80211_conf_filter() - This function configure the device's RX filter.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @changed: Changed flags set.
+ * @total_flags: Total initial flags set.
+ * @multicast: Multicast.
+ *
+ * Return: None.
+ */
+static void rsi_mac80211_conf_filter(struct ieee80211_hw *hw,
+ u32 changed_flags,
+ u32 *total_flags,
+ u64 multicast)
+{
+ /* Not doing much here as of now */
+ *total_flags &= RSI_SUPP_FILTERS;
+}
+
+/**
+ * rsi_mac80211_conf_tx() - This function configures TX queue parameters
+ * (EDCF (aifs, cw_min, cw_max), bursting)
+ * for a hardware TX queue.
+ * @hw: Pointer to the ieee80211_hw structure
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @queue: Queue number.
+ * @params: Pointer to ieee80211_tx_queue_params structure.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_conf_tx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ u8 idx = 0;
+
+ if (queue >= IEEE80211_NUM_ACS)
+ return 0;
+
+ rsi_dbg(INFO_ZONE,
+ "%s: Conf queue %d, aifs: %d, cwmin: %d cwmax: %d, txop: %d\n",
+ __func__, queue, params->aifs,
+ params->cw_min, params->cw_max, params->txop);
+
+ mutex_lock(&common->mutex);
+ /* Map into the way the f/w expects */
+ switch (queue) {
+ case IEEE80211_AC_VO:
+ idx = VO_Q;
+ break;
+ case IEEE80211_AC_VI:
+ idx = VI_Q;
+ break;
+ case IEEE80211_AC_BE:
+ idx = BE_Q;
+ break;
+ case IEEE80211_AC_BK:
+ idx = BK_Q;
+ break;
+ default:
+ idx = BE_Q;
+ break;
+ }
+
+ memcpy(&common->edca_params[idx],
+ params,
+ sizeof(struct ieee80211_tx_queue_params));
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+/**
+ * rsi_hal_key_config() - This function loads the keys into the firmware.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @key: Pointer to the ieee80211_key_conf structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_hal_key_config(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *key)
+{
+ struct rsi_hw *adapter = hw->priv;
+ int status;
+ u8 key_type;
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ key_type = RSI_PAIRWISE_KEY;
+ else
+ key_type = RSI_GROUP_KEY;
+
+ rsi_dbg(ERR_ZONE, "%s: Cipher 0x%x key_type: %d key_len: %d\n",
+ __func__, key->cipher, key_type, key->keylen);
+
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP104) ||
+ (key->cipher == WLAN_CIPHER_SUITE_WEP40)) {
+ status = rsi_hal_load_key(adapter->priv,
+ key->key,
+ key->keylen,
+ RSI_PAIRWISE_KEY,
+ key->keyidx,
+ key->cipher);
+ if (status)
+ return status;
+ }
+ return rsi_hal_load_key(adapter->priv,
+ key->key,
+ key->keylen,
+ key_type,
+ key->keyidx,
+ key->cipher);
+}
+
+/**
+ * rsi_mac80211_set_key() - This function sets type of key to be loaded.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @cmd: enum set_key_cmd.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ * @key: Pointer to the ieee80211_key_conf structure.
+ *
+ * Return: status: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_set_key(struct ieee80211_hw *hw,
+ enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ struct security_info *secinfo = &common->secinfo;
+ int status;
+
+ mutex_lock(&common->mutex);
+ switch (cmd) {
+ case SET_KEY:
+ secinfo->security_enable = true;
+ status = rsi_hal_key_config(hw, vif, key);
+ if (status) {
+ mutex_unlock(&common->mutex);
+ return -EINVAL;
+ }
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ secinfo->ptk_cipher = key->cipher;
+ else
+ secinfo->gtk_cipher = key->cipher;
+
+ key->hw_key_idx = key->keyidx;
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+
+ rsi_dbg(ERR_ZONE, "%s: RSI set_key\n", __func__);
+ break;
+
+ case DISABLE_KEY:
+ secinfo->security_enable = false;
+ rsi_dbg(ERR_ZONE, "%s: RSI del key\n", __func__);
+ memset(key, 0, sizeof(struct ieee80211_key_conf));
+ status = rsi_hal_key_config(hw, vif, key);
+ break;
+
+ default:
+ status = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&common->mutex);
+ return status;
+}
+
+/**
+ * rsi_mac80211_ampdu_action() - This function selects the AMPDU action for
+ * the corresponding mlme_action flag and
+ * informs the f/w regarding this.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @action: ieee80211_ampdu_mlme_action enum.
+ * @sta: Pointer to the ieee80211_sta structure.
+ * @tid: Traffic identifier.
+ * @ssn: Pointer to ssn value.
+ * @buf_size: Buffer size (for kernel version > 2.6.38).
+ *
+ * Return: status: 0 on success, negative error code on failure.
+ */
+static int rsi_mac80211_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta,
+ unsigned short tid,
+ unsigned short *ssn,
+ unsigned char buf_size)
+{
+ int status = -EOPNOTSUPP;
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+ u16 seq_no = 0;
+ u8 ii = 0;
+
+ for (ii = 0; ii < RSI_MAX_VIFS; ii++) {
+ if (vif == adapter->vifs[ii])
+ break;
+ }
+
+ mutex_lock(&common->mutex);
+ rsi_dbg(INFO_ZONE, "%s: AMPDU action %d called\n", __func__, action);
+ if (ssn != NULL)
+ seq_no = *ssn;
+
+ switch (action) {
+ case IEEE80211_AMPDU_RX_START:
+ status = rsi_send_aggregation_params_frame(common,
+ tid,
+ seq_no,
+ buf_size,
+ STA_RX_ADDBA_DONE);
+ break;
+
+ case IEEE80211_AMPDU_RX_STOP:
+ status = rsi_send_aggregation_params_frame(common,
+ tid,
+ 0,
+ buf_size,
+ STA_RX_DELBA);
+ break;
+
+ case IEEE80211_AMPDU_TX_START:
+ common->vif_info[ii].seq_start = seq_no;
+ ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ break;
+
+ case IEEE80211_AMPDU_TX_STOP_CONT:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+ status = rsi_send_aggregation_params_frame(common,
+ tid,
+ seq_no,
+ buf_size,
+ STA_TX_DELBA);
+ if (!status)
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ break;
+
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ status = rsi_send_aggregation_params_frame(common,
+ tid,
+ common->vif_info[ii]
+ .seq_start,
+ buf_size,
+ STA_TX_ADDBA_DONE);
+ break;
+
+ default:
+ rsi_dbg(ERR_ZONE, "%s: Uknown AMPDU action\n", __func__);
+ break;
+ }
+
+ mutex_unlock(&common->mutex);
+ return status;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 06/11] rsi: MAC80211 callbacks and management functions internal to device.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (4 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 05/11] rsi: MAC80211 callbacks to driver fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 07/11] rsi: Management functions internal to the device fariyaf
` (6 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch has the remaining functions which prepare management frames internal to the device.
---
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 319 +++++++++++++++
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 562 +++++++++++++++++++++++++++
2 files changed, 881 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_mgmt.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index a82fdc0..42c3719 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -687,3 +687,322 @@ static int rsi_mac80211_ampdu_action(struct ieee80211_hw *hw,
mutex_unlock(&common->mutex);
return status;
}
+
+/**
+ * rsi_mac80211_set_rts_threshold() - This function sets rts threshold value.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @value: Rts threshold value.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_mac80211_set_rts_threshold(struct ieee80211_hw *hw,
+ u32 value)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ common->rts_threshold = value;
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+/**
+ * rsi_mac80211_set_rate_mask() - This function sets bitrate_mask to be used.
+ * @hw: Pointer to the ieee80211_hw structure
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @mask: Pointer to the cfg80211_bitrate_mask structure.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_mac80211_set_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ const struct cfg80211_bitrate_mask *mask)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+
+ common->fixedrate_mask[IEEE80211_BAND_2GHZ] = 0;
+
+ if (mask->control[IEEE80211_BAND_2GHZ].legacy == 0xfff) {
+ common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
+ (mask->control[IEEE80211_BAND_2GHZ].ht_mcs[0] << 12);
+ } else {
+ common->fixedrate_mask[IEEE80211_BAND_2GHZ] =
+ mask->control[IEEE80211_BAND_2GHZ].legacy;
+ }
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+/**
+ * rsi_fill_rx_status() - This function fills rx status in
+ * ieee80211_rx_status structure.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @skb: Pointer to the socket buffer structure.
+ * @common: Pointer to the driver private structure.
+ * @rxs: Pointer to the ieee80211_rx_status structure.
+ *
+ * Return: None.
+ */
+static void rsi_fill_rx_status(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct rsi_common *common,
+ struct ieee80211_rx_status *rxs)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct skb_info *rx_params = (struct skb_info *)info->driver_data;
+ struct ieee80211_hdr *hdr;
+ char rssi = rx_params->rssi;
+ u8 hdrlen = 0;
+ u8 channel = rx_params->channel;
+ s32 freq;
+
+ hdr = ((struct ieee80211_hdr *)(skb->data));
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ memset(info, 0, sizeof(struct ieee80211_tx_info));
+
+ rxs->signal = -(rssi);
+
+ if (channel <= 14)
+ rxs->band = IEEE80211_BAND_2GHZ;
+ else
+ rxs->band = IEEE80211_BAND_5GHZ;
+
+ freq = ieee80211_channel_to_frequency(channel, rxs->band);
+
+ if (freq)
+ rxs->freq = freq;
+
+ if (ieee80211_has_protected(hdr->frame_control)) {
+ if (rsi_is_cipher_wep(common)) {
+ memmove(skb->data + 4, skb->data, hdrlen);
+ skb_pull(skb, 4);
+ } else {
+ memmove(skb->data + 8, skb->data, hdrlen);
+ skb_pull(skb, 8);
+ rxs->flag |= RX_FLAG_MMIC_STRIPPED;
+ }
+ rxs->flag |= RX_FLAG_DECRYPTED;
+ rxs->flag |= RX_FLAG_IV_STRIPPED;
+ }
+}
+
+/**
+ * rsi_indicate_pkt_to_os() - This function sends recieved packet to mac80211.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+void rsi_indicate_pkt_to_os(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hw *hw = adapter->hw;
+ struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
+
+ if ((common->iface_down) || (!adapter->sc_nvifs)) {
+ dev_kfree_skb(skb);
+ return;
+ }
+
+ /* filling in the ieee80211_rx_status flags */
+ rsi_fill_rx_status(hw, skb, common, rx_status);
+
+ ieee80211_rx_irqsafe(hw, skb);
+}
+
+static void rsi_set_min_rate(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ struct rsi_common *common)
+{
+ u8 band = hw->conf.chandef.chan->band;
+ u8 ii;
+ u32 rate_bitmap;
+ bool matched = false;
+
+ common->bitrate_mask[band] = sta->supp_rates[band];
+
+ rate_bitmap = (common->fixedrate_mask[band] & sta->supp_rates[band]);
+
+ if (rate_bitmap & 0xfff) {
+ /* Find out the min rate */
+ for (ii = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
+ if (rate_bitmap & BIT(ii)) {
+ common->min_rate = rsi_rates[ii].hw_value;
+ matched = true;
+ break;
+ }
+ }
+ }
+
+ common->vif_info[0].is_ht = sta->ht_cap.ht_supported;
+
+ if ((common->vif_info[0].is_ht) && (rate_bitmap >> 12)) {
+ for (ii = 0; ii < ARRAY_SIZE(rsi_mcsrates); ii++) {
+ if ((rate_bitmap >> 12) & BIT(ii)) {
+ common->min_rate = rsi_mcsrates[ii];
+ matched = true;
+ break;
+ }
+ }
+ }
+
+ if (!matched)
+ common->min_rate = 0xffff;
+}
+
+/**
+ * rsi_mac80211_sta_add() - This function notifies driver about a peer getting
+ * connected.
+ * @hw: pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mac80211_sta_add(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+
+ rsi_set_min_rate(hw, sta, common);
+
+ if ((sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ||
+ (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40)) {
+ common->vif_info[0].sgi = true;
+ }
+
+ if (sta->ht_cap.ht_supported)
+ ieee80211_start_tx_ba_session(sta, 0, 0);
+
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+/**
+ * rsi_mac80211_sta_remove() - This function notifies driver about a peer
+ * getting disconnected.
+ * @hw: Pointer to the ieee80211_hw structure.
+ * @vif: Pointer to the ieee80211_vif structure.
+ * @sta: Pointer to the ieee80211_sta structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mac80211_sta_remove(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct rsi_hw *adapter = hw->priv;
+ struct rsi_common *common = adapter->priv;
+
+ mutex_lock(&common->mutex);
+ /* Resetting all the fields to default values */
+ common->bitrate_mask[IEEE80211_BAND_2GHZ] = 0;
+ common->bitrate_mask[IEEE80211_BAND_5GHZ] = 0;
+ common->min_rate = 0xffff;
+ common->vif_info[0].is_ht = false;
+ common->vif_info[0].sgi = false;
+ common->vif_info[0].seq_start = 0;
+ common->secinfo.ptk_cipher = 0;
+ common->secinfo.gtk_cipher = 0;
+ mutex_unlock(&common->mutex);
+
+ return 0;
+}
+
+static struct ieee80211_ops mac80211_ops = {
+ .tx = rsi_mac80211_tx,
+ .start = rsi_mac80211_start,
+ .stop = rsi_mac80211_stop,
+ .add_interface = rsi_mac80211_add_interface,
+ .remove_interface = rsi_mac80211_remove_interface,
+ .config = rsi_mac80211_config,
+ .bss_info_changed = rsi_mac80211_bss_info_changed,
+ .conf_tx = rsi_mac80211_conf_tx,
+ .configure_filter = rsi_mac80211_conf_filter,
+ .set_key = rsi_mac80211_set_key,
+ .set_rts_threshold = rsi_mac80211_set_rts_threshold,
+ .set_bitrate_mask = rsi_mac80211_set_rate_mask,
+ .ampdu_action = rsi_mac80211_ampdu_action,
+ .sta_add = rsi_mac80211_sta_add,
+ .sta_remove = rsi_mac80211_sta_remove,
+};
+
+/**
+ * rsi_mac80211_attach() - This function is used to initialize Mac80211 stack.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_mac80211_attach(struct rsi_common *common)
+{
+ int status = 0;
+ struct ieee80211_hw *hw = NULL;
+ struct wiphy *wiphy = NULL;
+ struct rsi_hw *adapter = common->priv;
+ u8 addr_mask[ETH_ALEN] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x3};
+
+ rsi_dbg(INIT_ZONE, "%s: Performing mac80211 attach\n", __func__);
+
+ hw = ieee80211_alloc_hw(sizeof(struct rsi_hw), &mac80211_ops);
+ if (!hw) {
+ rsi_dbg(ERR_ZONE, "%s: ieee80211 hw alloc failed\n", __func__);
+ return -ENOMEM;
+ }
+
+ wiphy = hw->wiphy;
+
+ SET_IEEE80211_DEV(hw, adapter->device);
+
+ hw->priv = adapter;
+ adapter->hw = hw;
+
+ hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_HAS_RATE_CONTROL |
+ IEEE80211_HW_AMPDU_AGGREGATION |
+ 0;
+
+ hw->queues = MAX_HW_QUEUES;
+ hw->extra_tx_headroom = RSI_NEEDED_HEADROOM;
+
+ hw->max_rates = 1;
+ hw->max_rate_tries = MAX_RETRIES;
+
+ hw->max_tx_aggregation_subframes = 6;
+ rsi_register_rates_channels(adapter, IEEE80211_BAND_2GHZ);
+ hw->rate_control_algorithm = "AARF";
+
+ SET_IEEE80211_PERM_ADDR(hw, common->mac_addr);
+ ether_addr_copy(hw->wiphy->addr_mask, addr_mask);
+
+ wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+ wiphy->retry_short = RETRY_SHORT;
+ wiphy->retry_long = RETRY_LONG;
+ wiphy->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+ wiphy->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+ wiphy->flags = 0;
+
+ wiphy->available_antennas_rx = 1;
+ wiphy->available_antennas_tx = 1;
+ wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &adapter->sbands[IEEE80211_BAND_2GHZ];
+
+ status = ieee80211_register_hw(hw);
+ if (status)
+ return status;
+
+ return rsi_init_dbgfs(adapter);
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
new file mode 100644
index 0000000..a9a189a
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -0,0 +1,562 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+static struct bootup_params boot_params_20 = {
+ .magic_number = cpu_to_le16(0x5aa5),
+ .crystal_good_time = 0x0,
+ .valid = cpu_to_le32(VALID_20),
+ .reserved_for_valids = 0x0,
+ .bootup_mode_info = 0x0,
+ .digital_loop_back_params = 0x0,
+ .rtls_timestamp_en = 0x0,
+ .host_spi_intr_cfg = 0x0,
+ .device_clk_info = {{
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+ (TA_PLL_M_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+ (PLL960_N_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = cpu_to_le16(BIT(3)),
+ .bbp_lmac_clk_reg_val = cpu_to_le16(0x121),
+ .umac_clock_reg_config = 0x0,
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ },
+ {
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+ (TA_PLL_M_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+ (PLL960_N_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = 0x0,
+ .bbp_lmac_clk_reg_val = 0x0,
+ .umac_clock_reg_config = 0x0,
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ },
+ {
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_20 << 8)|
+ (TA_PLL_M_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_20),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_20 << 8)|
+ (PLL960_N_VAL_20)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_20),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = 0x0,
+ .bbp_lmac_clk_reg_val = 0x0,
+ .umac_clock_reg_config = 0x0,
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ } },
+ .buckboost_wakeup_cnt = 0x0,
+ .pmu_wakeup_wait = 0x0,
+ .shutdown_wait_time = 0x0,
+ .pmu_slp_clkout_sel = 0x0,
+ .wdt_prog_value = 0x0,
+ .wdt_soc_rst_delay = 0x0,
+ .dcdc_operation_mode = 0x0,
+ .soc_reset_wait_cnt = 0x0
+};
+
+static struct bootup_params boot_params_40 = {
+ .magic_number = cpu_to_le16(0x5aa5),
+ .crystal_good_time = 0x0,
+ .valid = cpu_to_le32(VALID_40),
+ .reserved_for_valids = 0x0,
+ .bootup_mode_info = 0x0,
+ .digital_loop_back_params = 0x0,
+ .rtls_timestamp_en = 0x0,
+ .host_spi_intr_cfg = 0x0,
+ .device_clk_info = {{
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+ (TA_PLL_M_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+ (PLL960_N_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = cpu_to_le16(0x09),
+ .bbp_lmac_clk_reg_val = cpu_to_le16(0x1121),
+ .umac_clock_reg_config = cpu_to_le16(0x48),
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ },
+ {
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+ (TA_PLL_M_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+ (PLL960_N_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = 0x0,
+ .bbp_lmac_clk_reg_val = 0x0,
+ .umac_clock_reg_config = 0x0,
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ },
+ {
+ .pll_config_g = {
+ .tapll_info_g = {
+ .pll_reg_1 = cpu_to_le16((TA_PLL_N_VAL_40 << 8)|
+ (TA_PLL_M_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(TA_PLL_P_VAL_40),
+ },
+ .pll960_info_g = {
+ .pll_reg_1 = cpu_to_le16((PLL960_P_VAL_40 << 8)|
+ (PLL960_N_VAL_40)),
+ .pll_reg_2 = cpu_to_le16(PLL960_M_VAL_40),
+ .pll_reg_3 = 0x0,
+ },
+ .afepll_info_g = {
+ .pll_reg = cpu_to_le16(0x9f0),
+ }
+ },
+ .switch_clk_g = {
+ .switch_clk_info = 0x0,
+ .bbp_lmac_clk_reg_val = 0x0,
+ .umac_clock_reg_config = 0x0,
+ .qspi_uart_clock_reg_config = 0x0
+ }
+ } },
+ .buckboost_wakeup_cnt = 0x0,
+ .pmu_wakeup_wait = 0x0,
+ .shutdown_wait_time = 0x0,
+ .pmu_slp_clkout_sel = 0x0,
+ .wdt_prog_value = 0x0,
+ .wdt_soc_rst_delay = 0x0,
+ .dcdc_operation_mode = 0x0,
+ .soc_reset_wait_cnt = 0x0
+};
+
+static u16 mcs[] = {13, 26, 39, 52, 78, 104, 117, 130};
+
+/**
+ * rsi_set_default_parameters() - This function sets default parameters.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: none
+ */
+static void rsi_set_default_parameters(struct rsi_common *common)
+{
+ common->band = IEEE80211_BAND_2GHZ;
+ common->channel_width = BW_20MHZ;
+ common->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
+ common->channel = 1;
+ common->min_rate = 0xffff;
+ common->fsm_state = FSM_CARD_NOT_READY;
+ common->iface_down = true;
+}
+
+/**
+ * rsi_set_contention_vals() - This function sets the contention values for the
+ * backoff procedure.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+static void rsi_set_contention_vals(struct rsi_common *common)
+{
+ u8 ii = 0;
+
+ for (; ii < NUM_EDCA_QUEUES; ii++) {
+ common->tx_qinfo[ii].wme_params =
+ (((common->edca_params[ii].cw_min / 2) +
+ (common->edca_params[ii].aifs)) *
+ WMM_SHORT_SLOT_TIME + SIFS_DURATION);
+ common->tx_qinfo[ii].weight = common->tx_qinfo[ii].wme_params;
+ common->tx_qinfo[ii].pkt_contended = 0;
+ }
+}
+
+/**
+ * rsi_send_internal_mgmt_frame() - This function sends management frames to
+ * firmware.Also schedules packet to queue
+ * for transmission.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_send_internal_mgmt_frame(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct skb_info *tx_params;
+
+ if (skb == NULL) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to allocate skb\n", __func__);
+ return -ENOMEM;
+ }
+ tx_params = (struct skb_info *)&IEEE80211_SKB_CB(skb)->driver_data;
+ tx_params->flags |= INTERNAL_MGMT_PKT;
+ skb_queue_tail(&common->tx_queue[MGMT_SOFT_Q], skb);
+ rsi_set_event(&common->tx_thread.event);
+ return 0;
+}
+
+/**
+ * rsi_load_radio_caps() - This function is used to send radio capabilities
+ * values to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_load_radio_caps(struct rsi_common *common)
+{
+ struct rsi_radio_caps *radio_caps;
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hw *hw = adapter->hw;
+ u16 inx = 0;
+ u8 ii;
+ u8 radio_id = 0;
+ u16 gc[20] = {0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0,
+ 0xf0, 0xf0, 0xf0, 0xf0};
+ struct ieee80211_conf *conf = &hw->conf;
+ struct sk_buff *skb;
+
+ rsi_dbg(INFO_ZONE, "%s: Sending rate symbol req frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_radio_caps));
+
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_radio_caps));
+ radio_caps = (struct rsi_radio_caps *)skb->data;
+
+ radio_caps->desc_word[1] = cpu_to_le16(RADIO_CAPABILITIES);
+ radio_caps->desc_word[4] = cpu_to_le16(RSI_RF_TYPE << 8);
+
+ if (common->channel_width == BW_40MHZ) {
+ radio_caps->desc_word[7] |= cpu_to_le16(RSI_LMAC_CLOCK_80MHZ);
+ radio_caps->desc_word[7] |= cpu_to_le16(RSI_ENABLE_40MHZ);
+ if (common->channel_width) {
+ radio_caps->desc_word[5] =
+ cpu_to_le16(common->channel_width << 12);
+ radio_caps->desc_word[5] |= cpu_to_le16(FULL40M_ENABLE);
+ }
+
+ if (conf_is_ht40_minus(conf)) {
+ radio_caps->desc_word[5] = 0;
+ radio_caps->desc_word[5] |=
+ cpu_to_le16(LOWER_20_ENABLE);
+ radio_caps->desc_word[5] |=
+ cpu_to_le16(LOWER_20_ENABLE >> 12);
+ }
+
+ if (conf_is_ht40_plus(conf)) {
+ radio_caps->desc_word[5] = 0;
+ radio_caps->desc_word[5] |=
+ cpu_to_le16(UPPER_20_ENABLE);
+ radio_caps->desc_word[5] |=
+ cpu_to_le16(UPPER_20_ENABLE >> 12);
+ }
+ }
+
+ radio_caps->desc_word[7] |= cpu_to_le16(radio_id << 8);
+
+ for (ii = 0; ii < MAX_HW_QUEUES; ii++) {
+ radio_caps->qos_params[ii].cont_win_min_q = cpu_to_le16(3);
+ radio_caps->qos_params[ii].cont_win_max_q = cpu_to_le16(0x3f);
+ radio_caps->qos_params[ii].aifsn_val_q = cpu_to_le16(2);
+ radio_caps->qos_params[ii].txop_q = 0;
+ }
+
+ for (ii = 0; ii < MAX_HW_QUEUES - 4; ii++) {
+ radio_caps->qos_params[ii].cont_win_min_q =
+ cpu_to_le16(common->edca_params[ii].cw_min);
+ radio_caps->qos_params[ii].cont_win_max_q =
+ cpu_to_le16(common->edca_params[ii].cw_max);
+ radio_caps->qos_params[ii].aifsn_val_q =
+ cpu_to_le16((common->edca_params[ii].aifs) << 8);
+ radio_caps->qos_params[ii].txop_q =
+ cpu_to_le16(common->edca_params[ii].txop);
+ }
+
+ memcpy(&common->rate_pwr[0], &gc[0], 40);
+ for (ii = 0; ii < 20; ii++)
+ radio_caps->gcpd_per_rate[inx++] =
+ cpu_to_le16(common->rate_pwr[ii] & 0x00FF);
+
+ radio_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_radio_caps) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+
+
+ skb_put(skb, (sizeof(struct rsi_radio_caps)));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_mgmt_pkt_to_core() - This function is the entry point for Mgmt module.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to received packet.
+ * @msg_len: Length of the recieved packet.
+ * @type: Type of recieved packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_mgmt_pkt_to_core(struct rsi_common *common,
+ u8 *msg,
+ s32 msg_len,
+ u8 type)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_tx_info *info;
+ struct skb_info *rx_params;
+ u8 pad_bytes = msg[4];
+ u8 pkt_recv;
+ struct sk_buff *skb;
+ char *buffer;
+
+ if (type == RX_DOT11_MGMT) {
+ if (!adapter->sc_nvifs)
+ return -ENOLINK;
+
+ msg_len -= pad_bytes;
+ if ((msg_len <= 0) || (!msg)) {
+ rsi_dbg(MGMT_RX_ZONE, "Invalid rx msg of len = %d\n",
+ __func__, msg_len);
+ return -EINVAL;
+ }
+
+ skb = dev_alloc_skb(msg_len);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to allocate skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ buffer = skb_put(skb, msg_len);
+
+ memcpy(buffer,
+ (u8 *)(msg + FRAME_DESC_SZ + pad_bytes),
+ msg_len);
+
+ pkt_recv = buffer[0];
+
+ info = IEEE80211_SKB_CB(skb);
+ rx_params = (struct skb_info *)info->driver_data;
+ rx_params->rssi = rsi_get_rssi(msg);
+ rx_params->channel = rsi_get_channel(msg);
+ rsi_indicate_pkt_to_os(common, skb);
+ } else {
+ rsi_dbg(MGMT_TX_ZONE, "%s: Internal Packet\n", __func__);
+ }
+
+ return 0;
+}
+
+/**
+ * rsi_hal_send_sta_notify_frame() - This function sends the station notify
+ * frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @opmode: Operating mode of device.
+ * @notify_event: Notification about station connection.
+ * @bssid: bssid.
+ * @qos_enable: Qos is enabled.
+ * @aid: Aid (unique for all STA).
+ *
+ * Return: status: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_hal_send_sta_notify_frame(struct rsi_common *common,
+ u8 opmode,
+ u8 notify_event,
+ const unsigned char *bssid,
+ u8 qos_enable,
+ u16 aid)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_peer_notify *peer_notify;
+ u16 vap_id = 0;
+ int status;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending sta notify frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_peer_notify));
+
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_peer_notify));
+ peer_notify = (struct rsi_peer_notify *)skb->data;
+
+ peer_notify->command = cpu_to_le16(opmode << 1);
+
+ switch (notify_event) {
+ case STA_CONNECTED:
+ peer_notify->command |= cpu_to_le16(RSI_ADD_PEER);
+ break;
+ case STA_DISCONNECTED:
+ peer_notify->command |= cpu_to_le16(RSI_DELETE_PEER);
+ break;
+ default:
+ break;
+ }
+
+ peer_notify->command |= cpu_to_le16((aid & 0xfff) << 4);
+ ether_addr_copy(peer_notify->mac_addr, bssid);
+
+ peer_notify->sta_flags = cpu_to_le32((qos_enable) ? 1 : 0);
+
+ peer_notify->desc_word[0] =
+ cpu_to_le16((sizeof(struct rsi_peer_notify) - FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ peer_notify->desc_word[1] = cpu_to_le16(PEER_NOTIFY);
+ peer_notify->desc_word[7] |= cpu_to_le16(vap_id << 8);
+
+ skb_put(skb, sizeof(struct rsi_peer_notify));
+
+ status = rsi_send_internal_mgmt_frame(common, skb);
+
+ if (!status && qos_enable) {
+ rsi_set_contention_vals(common);
+ status = rsi_load_radio_caps(common);
+ }
+ return status;
+}
+
+/**
+ * rsi_send_aggregation_params_frame() - This function sends the ampdu
+ * indication frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @tid: traffic identifier.
+ * @ssn: ssn.
+ * @buf_size: buffer size.
+ * @event: notification about station connection.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+int rsi_send_aggregation_params_frame(struct rsi_common *common,
+ u16 tid,
+ u16 ssn,
+ u8 buf_size,
+ u8 event)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_mac_frame *mgmt_frame;
+ u8 peer_id = 0;
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending AMPDU indication frame\n", __func__);
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(AMPDU_IND);
+
+ if (event == STA_TX_ADDBA_DONE) {
+ mgmt_frame->desc_word[4] = cpu_to_le16(ssn);
+ mgmt_frame->desc_word[5] = cpu_to_le16(buf_size);
+ mgmt_frame->desc_word[7] =
+ cpu_to_le16((tid | (START_AMPDU_AGGR << 4) | (peer_id << 8)));
+ } else if (event == STA_RX_ADDBA_DONE) {
+ mgmt_frame->desc_word[4] = cpu_to_le16(ssn);
+ mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+ (START_AMPDU_AGGR << 4) |
+ (RX_BA_INDICATION << 5) |
+ (peer_id << 8));
+ } else if (event == STA_TX_DELBA) {
+ mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+ (STOP_AMPDU_AGGR << 4) |
+ (peer_id << 8));
+ } else if (event == STA_RX_DELBA) {
+ mgmt_frame->desc_word[7] = cpu_to_le16(tid |
+ (STOP_AMPDU_AGGR << 4) |
+ (RX_BA_INDICATION << 5) |
+ (peer_id << 8));
+ }
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 07/11] rsi: Management functions internal to the device.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (5 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 06/11] rsi: MAC80211 callbacks and management functions internal to device fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 08/11] rsi: USB functionality fariyaf
` (5 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch has the remaining functions which prepare management frames internal to the device.
---
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 740 +++++++++++++++++++++++++++++++
1 files changed, 740 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index a9a189a..de9a65c 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -560,3 +560,743 @@ int rsi_send_aggregation_params_frame(struct rsi_common *common,
return rsi_send_internal_mgmt_frame(common, skb);
}
+
+/**
+ * rsi_program_bb_rf() - This function starts base band and RF programming.
+ * This is called after initial configurations are done.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+static int rsi_program_bb_rf(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_mac_frame *mgmt_frame;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending program BB/RF frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(BBP_PROG_IN_TA);
+ mgmt_frame->desc_word[4] = cpu_to_le16(common->endpoint << 8);
+
+ if (common->rf_reset) {
+ mgmt_frame->desc_word[7] = cpu_to_le16(RF_RESET_ENABLE);
+ rsi_dbg(MGMT_TX_ZONE, "%s: ===> RF RESET REQUEST SENT <===\n",
+ __func__);
+ common->rf_reset = 0;
+ }
+ common->bb_rf_prog_count = 1;
+ mgmt_frame->desc_word[7] |= cpu_to_le16(PUT_BBP_RESET |
+ BBP_REG_WRITE | (RSI_RF_TYPE << 4));
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_set_vap_capabilities() - This function send vap capability to firmware.
+ * @common: Pointer to the driver private structure.
+ * @opmode: Operating mode of device.
+ *
+ * Return: 0 on success, corresponding negative error code on failure.
+ */
+int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_vap_caps *vap_caps;
+ u16 vap_id = 0;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending VAP capabilities frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_vap_caps));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_vap_caps));
+ vap_caps = (struct rsi_vap_caps *)skb->data;
+
+ vap_caps->desc_word[0] = cpu_to_le16((sizeof(struct rsi_vap_caps) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ vap_caps->desc_word[1] = cpu_to_le16(VAP_CAPABILITIES);
+ vap_caps->desc_word[4] = cpu_to_le16(mode |
+ (common->channel_width << 8));
+ vap_caps->desc_word[7] = cpu_to_le16((vap_id << 8) |
+ (common->mac_id << 4) |
+ common->radio_id);
+
+ memcpy(vap_caps->mac_addr, common->mac_addr, IEEE80211_ADDR_LEN);
+ vap_caps->keep_alive_period = cpu_to_le16(90);
+ vap_caps->frag_threshold = cpu_to_le16(IEEE80211_MAX_FRAG_THRESHOLD);
+
+ vap_caps->rts_threshold = cpu_to_le16(common->rts_threshold);
+ vap_caps->default_mgmt_rate = 0;
+ if (conf_is_ht40(&common->priv->hw->conf)) {
+ vap_caps->default_ctrl_rate =
+ cpu_to_le32(RSI_RATE_6 | FULL40M_ENABLE << 16);
+ } else {
+ vap_caps->default_ctrl_rate = cpu_to_le32(RSI_RATE_6);
+ }
+ vap_caps->default_data_rate = 0;
+ vap_caps->beacon_interval = cpu_to_le16(200);
+ vap_caps->dtim_period = cpu_to_le16(4);
+
+ skb_put(skb, sizeof(*vap_caps));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_hal_load_key() - This function is used to load keys within the firmware.
+ * @common: Pointer to the driver private structure.
+ * @data: Pointer to the key data.
+ * @key_len: Key length to be loaded.
+ * @key_type: Type of key: GROUP/PAIRWISE.
+ * @key_id: Key index.
+ * @cipher: Type of cipher used.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_hal_load_key(struct rsi_common *common,
+ u8 *data,
+ u16 key_len,
+ u8 key_type,
+ u8 key_id,
+ u32 cipher)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_set_key *set_key;
+ u16 key_descriptor = 0;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending load key frame\n", __func__);
+
+ skb = dev_alloc_skb(sizeof(struct rsi_set_key));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_set_key));
+ set_key = (struct rsi_set_key *)skb->data;
+
+ if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+ (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+ key_len += 1;
+ key_descriptor |= BIT(2);
+ if (key_len >= 13)
+ key_descriptor |= BIT(3);
+ } else if (cipher != KEY_TYPE_CLEAR) {
+ key_descriptor |= BIT(4);
+ if (key_type == RSI_PAIRWISE_KEY)
+ key_id = 0;
+ if (cipher == WLAN_CIPHER_SUITE_TKIP)
+ key_descriptor |= BIT(5);
+ }
+ key_descriptor |= (key_type | BIT(13) | (key_id << 14));
+
+ set_key->desc_word[0] = cpu_to_le16((sizeof(struct rsi_set_key) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ set_key->desc_word[1] = cpu_to_le16(SET_KEY_REQ);
+ set_key->desc_word[4] = cpu_to_le16(key_descriptor);
+
+ if ((cipher == WLAN_CIPHER_SUITE_WEP40) ||
+ (cipher == WLAN_CIPHER_SUITE_WEP104)) {
+ memcpy(&set_key->key[key_id][1],
+ data,
+ key_len * 2);
+ } else {
+ memcpy(&set_key->key[0][0], data, key_len);
+ }
+
+ memcpy(set_key->tx_mic_key, &data[16], 8);
+ memcpy(set_key->rx_mic_key, &data[24], 8);
+
+ skb_put(skb, sizeof(struct rsi_set_key));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/*
+ * rsi_load_bootup_params() - This function send bootup params to the firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static u8 rsi_load_bootup_params(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_boot_params *boot_params;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending boot params frame\n", __func__);
+ skb = dev_alloc_skb(sizeof(struct rsi_boot_params));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_boot_params));
+ boot_params = (struct rsi_boot_params *)skb->data;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s:\n", __func__);
+
+ if (common->channel_width == BW_40MHZ) {
+ memcpy(&boot_params->bootup_params,
+ &boot_params_40,
+ sizeof(struct bootup_params));
+ rsi_dbg(MGMT_TX_ZONE, "%s: Packet 40MHZ <=== %d\n", __func__,
+ UMAC_CLK_40BW);
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40BW);
+ } else {
+ memcpy(&boot_params->bootup_params,
+ &boot_params_20,
+ sizeof(struct bootup_params));
+ if (boot_params_20.valid != cpu_to_le32(VALID_20)) {
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_20BW);
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Packet 20MHZ <=== %d\n", __func__,
+ UMAC_CLK_20BW);
+ } else {
+ boot_params->desc_word[7] = cpu_to_le16(UMAC_CLK_40MHZ);
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Packet 20MHZ <=== %d\n", __func__,
+ UMAC_CLK_40MHZ);
+ }
+ }
+
+ /**
+ * Bit{0:11} indicates length of the Packet
+ * Bit{12:15} indicates host queue number
+ */
+ boot_params->desc_word[0] = cpu_to_le16(sizeof(struct bootup_params) |
+ (RSI_WIFI_MGMT_Q << 12));
+ boot_params->desc_word[1] = cpu_to_le16(BOOTUP_PARAMS_REQUEST);
+
+ skb_put(skb, sizeof(struct rsi_boot_params));
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_send_reset_mac() - This function prepares reset MAC request and sends an
+ * internal management frame to indicate it to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_reset_mac(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_mac_frame *mgmt_frame;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending reset MAC frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ);
+ mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8);
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_set_channel() - This function programs the channel.
+ * @common: Pointer to the driver private structure.
+ * @channel: Channel value to be set.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+int rsi_set_channel(struct rsi_common *common, u16 channel)
+{
+ struct sk_buff *skb = NULL;
+ struct rsi_mac_frame *mgmt_frame;
+
+ rsi_dbg(MGMT_TX_ZONE,
+ "%s: Sending scan req frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ if (common->band == IEEE80211_BAND_5GHZ) {
+ if ((channel >= 36) && (channel <= 64))
+ channel = ((channel - 32) / 4);
+ else if ((channel > 64) && (channel <= 140))
+ channel = ((channel - 102) / 4) + 8;
+ else if (channel >= 149)
+ channel = ((channel - 151) / 4) + 18;
+ else
+ return -EINVAL;
+ } else {
+ if (channel > 14) {
+ rsi_dbg(ERR_ZONE, "%s: Invalid chno %d, band = %d\n",
+ __func__, channel, common->band);
+ return -EINVAL;
+ }
+ }
+
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ mgmt_frame->desc_word[1] = cpu_to_le16(SCAN_REQUEST);
+ mgmt_frame->desc_word[4] = cpu_to_le16(channel);
+
+ mgmt_frame->desc_word[7] = cpu_to_le16(PUT_BBP_RESET |
+ BBP_REG_WRITE |
+ (RSI_RF_TYPE << 4));
+
+ mgmt_frame->desc_word[5] = cpu_to_le16(0x01);
+
+ if (common->channel_width == BW_40MHZ)
+ mgmt_frame->desc_word[5] |= cpu_to_le16(0x1 << 8);
+
+ common->channel = channel;
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_compare() - This function is used to compare two integers
+ * @a: pointer to the first integer
+ * @b: pointer to the second integer
+ *
+ * Return: 0 if both are equal, -1 if the first is smaller, else 1
+ */
+static int rsi_compare(const void *a, const void *b)
+{
+ u16 _a = *(const u16 *)(a);
+ u16 _b = *(const u16 *)(b);
+
+ if (_a > _b)
+ return -1;
+
+ if (_a < _b)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * rsi_map_rates() - This function is used to map selected rates to hw rates.
+ * @rate: The standard rate to be mapped.
+ * @offset: Offset that will be returned.
+ *
+ * Return: 0 if it is a mcs rate, else 1
+ */
+static bool rsi_map_rates(u16 rate, int *offset)
+{
+ int kk;
+ for (kk = 0; kk < ARRAY_SIZE(rsi_mcsrates); kk++) {
+ if (rate == mcs[kk]) {
+ *offset = kk;
+ return false;
+ }
+ }
+
+ for (kk = 0; kk < ARRAY_SIZE(rsi_rates); kk++) {
+ if (rate == rsi_rates[kk].bitrate / 5) {
+ *offset = kk;
+ break;
+ }
+ }
+ return true;
+}
+
+/**
+ * rsi_send_auto_rate_request() - This function is to set rates for connection
+ * and send autorate request to firmware.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, corresponding error code on failure.
+ */
+static int rsi_send_auto_rate_request(struct rsi_common *common)
+{
+ struct sk_buff *skb;
+ struct rsi_auto_rate *auto_rate;
+ int ii = 0, jj = 0, kk = 0;
+ struct ieee80211_hw *hw = common->priv->hw;
+ u8 band = hw->conf.chandef.chan->band;
+ u8 num_supported_rates = 0;
+ u8 rate_offset = 0;
+ u32 rate_bitmap = common->bitrate_mask[band];
+
+ u16 *selected_rates, min_rate;
+
+ skb = dev_alloc_skb(sizeof(struct rsi_auto_rate));
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ selected_rates = kmalloc(2 * RSI_TBL_SZ, GFP_KERNEL);
+ if (!selected_rates) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, sizeof(struct rsi_auto_rate));
+ memset(selected_rates, 0, 2 * RSI_TBL_SZ);
+
+ auto_rate = (struct rsi_auto_rate *)skb->data;
+
+ auto_rate->aarf_rssi = cpu_to_le16(((u16)3 << 6) | (u16)(18 & 0x3f));
+ auto_rate->collision_tolerance = cpu_to_le16(3);
+ auto_rate->failure_limit = cpu_to_le16(3);
+ auto_rate->initial_boundary = cpu_to_le16(3);
+ auto_rate->max_threshold_limt = cpu_to_le16(27);
+
+ auto_rate->desc_word[1] = cpu_to_le16(AUTO_RATE_IND);
+
+ if (common->channel_width == BW_40MHZ)
+ auto_rate->desc_word[7] |= cpu_to_le16(1);
+
+ if (band == IEEE80211_BAND_2GHZ)
+ min_rate = STD_RATE_01;
+ else
+ min_rate = STD_RATE_06;
+
+ for (ii = 0, jj = 0; ii < ARRAY_SIZE(rsi_rates); ii++) {
+ if (rate_bitmap & BIT(ii)) {
+ selected_rates[jj++] = (rsi_rates[ii].bitrate / 5);
+ rate_offset++;
+ }
+ }
+ num_supported_rates = jj;
+
+ if (common->vif_info[0].is_ht) {
+ for (ii = 0; ii < ARRAY_SIZE(mcs); ii++)
+ selected_rates[jj++] = mcs[ii];
+ num_supported_rates += ARRAY_SIZE(mcs);
+ rate_offset += ARRAY_SIZE(mcs);
+ }
+
+ if (rate_offset < (RSI_TBL_SZ / 2) - 1) {
+ for (ii = jj; ii < (RSI_TBL_SZ / 2); ii++) {
+ selected_rates[jj++] = min_rate;
+ rate_offset++;
+ }
+ }
+
+ sort(selected_rates, jj, sizeof(u16), &rsi_compare, NULL);
+
+ /* mapping the rates to RSI rates */
+ for (ii = 0; ii < jj; ii++) {
+ if (rsi_map_rates(selected_rates[ii], &kk)) {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_rates[kk].hw_value);
+ } else {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[kk]);
+ }
+ }
+
+ /* loading HT rates in the bottom half of the auto rate table */
+ if (common->vif_info[0].is_ht) {
+ if (common->vif_info[0].sgi)
+ auto_rate->supported_rates[rate_offset++] =
+ cpu_to_le16(RSI_RATE_MCS7_SG);
+
+ for (ii = rate_offset, kk = ARRAY_SIZE(rsi_mcsrates) - 1;
+ ii < rate_offset + 2 * ARRAY_SIZE(rsi_mcsrates); ii++) {
+ if (common->vif_info[0].sgi)
+ auto_rate->supported_rates[ii++] =
+ cpu_to_le16(rsi_mcsrates[kk] | BIT(9));
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[kk--]);
+ }
+
+ for (; ii < RSI_TBL_SZ; ii++) {
+ auto_rate->supported_rates[ii] =
+ cpu_to_le16(rsi_mcsrates[0]);
+ }
+ }
+
+ auto_rate->num_supported_rates = cpu_to_le16(num_supported_rates * 2);
+ auto_rate->moderate_rate_inx = cpu_to_le16(num_supported_rates / 2);
+ auto_rate->desc_word[7] |= cpu_to_le16(0 << 8);
+ num_supported_rates *= 2;
+
+ auto_rate->desc_word[0] = cpu_to_le16((sizeof(*auto_rate) -
+ FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+
+ skb_put(skb,
+ sizeof(struct rsi_auto_rate));
+ kfree(selected_rates);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_inform_bss_status() - This function informs about bss status with the
+ * help of sta notify params by sending an internal
+ * management frame to firmware.
+ * @common: Pointer to the driver private structure.
+ * @status: Bss status type.
+ * @bssid: Bssid.
+ * @qos_enable: Qos is enabled.
+ * @aid: Aid (unique for all STAs).
+ *
+ * Return: None.
+ */
+void rsi_inform_bss_status(struct rsi_common *common,
+ u8 status,
+ const unsigned char *bssid,
+ u8 qos_enable,
+ u16 aid)
+{
+ if (status) {
+ rsi_hal_send_sta_notify_frame(common,
+ NL80211_IFTYPE_STATION,
+ STA_CONNECTED,
+ bssid,
+ qos_enable,
+ aid);
+ if (common->min_rate == 0xffff)
+ rsi_send_auto_rate_request(common);
+ } else {
+ rsi_hal_send_sta_notify_frame(common,
+ NL80211_IFTYPE_STATION,
+ STA_DISCONNECTED,
+ bssid,
+ qos_enable,
+ aid);
+ }
+}
+
+/**
+ * rsi_eeprom_read() - This function sends a frame to read the mac address
+ * from the eeprom.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_eeprom_read(struct rsi_common *common)
+{
+ struct rsi_mac_frame *mgmt_frame;
+ struct sk_buff *skb;
+
+ rsi_dbg(MGMT_TX_ZONE, "%s: Sending EEPROM read req frame\n", __func__);
+
+ skb = dev_alloc_skb(FRAME_DESC_SZ);
+ if (!skb) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
+ /* FrameType */
+ mgmt_frame->desc_word[1] = cpu_to_le16(EEPROM_READ_TYPE);
+ mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
+ /* Number of bytes to read */
+ mgmt_frame->desc_word[3] = cpu_to_le16(ETH_ALEN +
+ WLAN_MAC_MAGIC_WORD_LEN +
+ WLAN_HOST_MODE_LEN +
+ WLAN_FW_VERSION_LEN);
+ /* Address to read */
+ mgmt_frame->desc_word[4] = cpu_to_le16(WLAN_MAC_EEPROM_ADDR);
+
+ skb_put(skb, FRAME_DESC_SZ);
+
+ return rsi_send_internal_mgmt_frame(common, skb);
+}
+
+/**
+ * rsi_handle_ta_confirm_type() - This function handles the confirm frames.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to received packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_handle_ta_confirm_type(struct rsi_common *common,
+ u8 *msg)
+{
+ u8 sub_type = (msg[15] & 0xff);
+
+ switch (sub_type) {
+ case BOOTUP_PARAMS_REQUEST:
+ rsi_dbg(FSM_ZONE, "%s: Boot up params confirm received\n",
+ __func__);
+ if (common->fsm_state == FSM_BOOT_PARAMS_SENT) {
+ if (rsi_eeprom_read(common)) {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ goto out;
+ } else {
+ common->fsm_state = FSM_EEPROM_READ_MAC_ADDR;
+ }
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received bootup params cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case EEPROM_READ_TYPE:
+ if (common->fsm_state == FSM_EEPROM_READ_MAC_ADDR) {
+ if (msg[16] == MAGIC_WORD) {
+ u8 offset = (FRAME_DESC_SZ + WLAN_HOST_MODE_LEN
+ + WLAN_MAC_MAGIC_WORD_LEN);
+ memcpy(common->mac_addr,
+ &msg[offset],
+ ETH_ALEN);
+ memcpy(&common->fw_ver,
+ &msg[offset + ETH_ALEN],
+ sizeof(struct version_info));
+
+ } else {
+ common->fsm_state = FSM_CARD_NOT_READY;
+ break;
+ }
+ if (rsi_send_reset_mac(common))
+ goto out;
+ else
+ common->fsm_state = FSM_RESET_MAC_SENT;
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received eeprom mac addr in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case RESET_MAC_REQ:
+ if (common->fsm_state == FSM_RESET_MAC_SENT) {
+ rsi_dbg(FSM_ZONE, "%s: Reset MAC cfm received\n",
+ __func__);
+
+ if (rsi_load_radio_caps(common))
+ goto out;
+ else
+ common->fsm_state = FSM_RADIO_CAPS_SENT;
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received reset mac cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case RADIO_CAPABILITIES:
+ if (common->fsm_state == FSM_RADIO_CAPS_SENT) {
+ common->rf_reset = 1;
+ if (rsi_program_bb_rf(common)) {
+ goto out;
+ } else {
+ common->fsm_state = FSM_BB_RF_PROG_SENT;
+ rsi_dbg(FSM_ZONE, "%s: Radio cap cfm received\n",
+ __func__);
+ }
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Received radio caps cfm in %d state\n",
+ __func__, common->fsm_state);
+ return 0;
+ }
+ break;
+
+ case BB_PROG_VALUES_REQUEST:
+ case RF_PROG_VALUES_REQUEST:
+ case BBP_PROG_IN_TA:
+ rsi_dbg(FSM_ZONE, "%s: BB/RF cfm received\n", __func__);
+ if (common->fsm_state == FSM_BB_RF_PROG_SENT) {
+ common->bb_rf_prog_count--;
+ if (!common->bb_rf_prog_count) {
+ common->fsm_state = FSM_MAC_INIT_DONE;
+ return rsi_mac80211_attach(common);
+ }
+ } else {
+ goto out;
+ }
+ break;
+
+ default:
+ rsi_dbg(INFO_ZONE, "%s: Invalid TA confirm pkt received\n",
+ __func__);
+ break;
+ }
+ return 0;
+out:
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt/Invalid frame received\n",
+ __func__);
+ return -EINVAL;
+}
+
+/**
+ * rsi_mgmt_pkt_recv() - This function processes the management packets
+ * recieved from the hardware.
+ * @common: Pointer to the driver private structure.
+ * @msg: Pointer to the received packet.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg)
+{
+ s32 msg_len = (le16_to_cpu(*(__le16 *)&msg[0]) & 0x0fff);
+ u16 msg_type = (msg[2]);
+
+ rsi_dbg(FSM_ZONE, "%s: Msg Len: %d, Msg Type: %4x\n",
+ __func__, msg_len, msg_type);
+
+ if (msg_type == TA_CONFIRM_TYPE) {
+ return rsi_handle_ta_confirm_type(common, msg);
+ } else if (msg_type == CARD_READY_IND) {
+ rsi_dbg(FSM_ZONE, "%s: Card ready indication received\n",
+ __func__);
+ if (common->fsm_state == FSM_CARD_NOT_READY) {
+ rsi_set_default_parameters(common);
+
+ if (rsi_load_bootup_params(common))
+ return -1;
+ else
+ common->fsm_state = FSM_BOOT_PARAMS_SENT;
+ } else {
+ return -EINVAL;
+ }
+ } else if (msg_type == TX_STATUS_IND) {
+ if (msg[15] == PROBEREQ_CONFIRM)
+ common->mgmt_q_block = false;
+ rsi_dbg(FSM_ZONE, "%s: Probe confirm received\n",
+ __func__);
+ } else {
+ return rsi_mgmt_pkt_to_core(common, msg, msg_len, msg_type);
+ }
+ return 0;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 08/11] rsi: USB functionality
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (6 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 07/11] rsi: Management functions internal to the device fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 09/11] rsi: SDIO functionality fariyaf
` (4 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch has the remaining functions which prepare management
frames internal to the device.
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 572 ++++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_91x_usb_ops.c | 177 +++++++++
2 files changed, 749 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb.c
create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb_ops.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
new file mode 100644
index 0000000..5760c56
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -0,0 +1,572 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_usb_card_write() - This function writes to the USB Card.
+ * @adapter: Pointer to the adapter structure.
+ * @buf: Pointer to the buffer from where the data has to be taken.
+ * @len: Length to be written.
+ * @endpoint: Type of endpoint.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_card_write(struct rsi_hw *adapter,
+ void *buf,
+ u16 len,
+ u8 endpoint)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ int status;
+ s32 transfer;
+
+ status = usb_bulk_msg(dev->usbdev,
+ usb_sndbulkpipe(dev->usbdev,
+ dev->bulkout_endpoint_addr[endpoint - 1]),
+ buf,
+ len,
+ &transfer,
+ HZ * 5);
+
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE,
+ "Card write failed with error code :%10d\n", status);
+ dev->write_fail = 1;
+ }
+ return status;
+}
+
+/**
+ * rsi_write_multiple() - This function writes multiple bytes of information
+ * to the USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_write_multiple(struct rsi_hw *adapter,
+ u8 endpoint,
+ u8 *data,
+ u32 count)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ u8 *seg = dev->tx_buffer;
+
+ if (dev->write_fail)
+ return 0;
+
+ if (endpoint == MGMT_EP) {
+ memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
+ memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
+ } else {
+ seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
+ }
+
+ return rsi_usb_card_write(adapter,
+ seg,
+ count + RSI_USB_TX_HEAD_ROOM,
+ endpoint);
+}
+
+/**
+ * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk
+ * endpoints to the device.
+ * @interface: Pointer to the USB interface structure.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: ret_val: 0 on success, -ENOMEM on failure.
+ */
+static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
+ struct rsi_hw *adapter)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ __le16 buffer_size;
+ int ii, bep_found = 0;
+
+ iface_desc = &(interface->altsetting[0]);
+
+ for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
+ endpoint = &(iface_desc->endpoint[ii].desc);
+
+ if ((!(dev->bulkin_endpoint_addr)) &&
+ (endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)) {
+ buffer_size = endpoint->wMaxPacketSize;
+ dev->bulkin_size = buffer_size;
+ dev->bulkin_endpoint_addr =
+ endpoint->bEndpointAddress;
+ }
+
+ if (!dev->bulkout_endpoint_addr[bep_found] &&
+ !(endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK)) {
+ dev->bulkout_endpoint_addr[bep_found] =
+ endpoint->bEndpointAddress;
+ buffer_size = endpoint->wMaxPacketSize;
+ dev->bulkout_size[bep_found] = buffer_size;
+ bep_found++;
+ }
+
+ if (bep_found >= MAX_BULK_EP)
+ break;
+ }
+
+ if (!(dev->bulkin_endpoint_addr) &&
+ (dev->bulkout_endpoint_addr[0]))
+ return -1;
+
+ return 0;
+}
+
+/* rsi_usb_reg_read() - This function reads data from given register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register to be read.
+ * @value: Value to be read.
+ * @len: length of data to be read.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_read(struct usb_device *usbdev,
+ u32 reg,
+ u16 *value,
+ u16 len)
+{
+ u8 temp_buf[4];
+ int status = 0;
+
+ status = usb_control_msg(usbdev,
+ usb_rcvctrlpipe(usbdev, 0),
+ USB_VENDOR_REGISTER_READ,
+ USB_TYPE_VENDOR,
+ ((reg & 0xffff0000) >> 16), (reg & 0xffff),
+ (void *)temp_buf,
+ len,
+ HZ * 5);
+
+ *value = (temp_buf[0] | (temp_buf[1] << 8));
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Reg read failed with error code :%d\n",
+ __func__, status);
+ }
+ return status;
+}
+
+/**
+ * rsi_usb_reg_write() - This function writes the given data into the given
+ * register address.
+ * @usbdev: Pointer to the usb_device structure.
+ * @reg: Address of the register.
+ * @value: Value to write.
+ * @len: Length of data to be written.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_usb_reg_write(struct usb_device *usbdev,
+ u32 reg,
+ u16 value,
+ u16 len)
+{
+ u8 usb_reg_buf[4];
+ int status = 0;
+
+ usb_reg_buf[0] = (value & 0x00ff);
+ usb_reg_buf[1] = (value & 0xff00) >> 8;
+ usb_reg_buf[2] = 0x0;
+ usb_reg_buf[3] = 0x0;
+
+ status = usb_control_msg(usbdev,
+ usb_sndctrlpipe(usbdev, 0),
+ USB_VENDOR_REGISTER_WRITE,
+ USB_TYPE_VENDOR,
+ ((reg & 0xffff0000) >> 16),
+ (reg & 0xffff),
+ (void *)usb_reg_buf,
+ len,
+ HZ * 5);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Reg write failed with error code :%d\n",
+ __func__, status);
+ }
+ return status;
+}
+
+/**
+ * rsi_rx_done_handler() - This function is called when a packet is received
+ * from USB stack. This is callback to recieve done.
+ * @urb: Received URB.
+ *
+ * Return: None.
+ */
+static void rsi_rx_done_handler(struct urb *urb)
+{
+ struct rsi_hw *adapter = urb->context;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+ if (urb->status)
+ return;
+
+ rsi_set_event(&dev->rx_thread.event);
+}
+
+/**
+ * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_rx_urb_submit(struct rsi_hw *adapter)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ struct urb *urb = dev->rx_usb_urb[0];
+
+ usb_fill_bulk_urb(urb,
+ dev->usbdev,
+ usb_rcvbulkpipe(dev->usbdev,
+ dev->bulkin_endpoint_addr),
+ urb->transfer_buffer,
+ 3000,
+ rsi_rx_done_handler,
+ adapter);
+ if (usb_submit_urb(urb, GFP_KERNEL)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * rsi_write_ta_register_multiple() - This function writes multiple bytes of
+ * information to multiple registers.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written on to the registers.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_write_ta_register_multiple(struct rsi_hw *adapter,
+ u32 addr,
+ u8 *data,
+ u32 count)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ u8 *buf;
+ u8 transfer;
+ int status = 0;
+
+ buf = kzalloc(4096, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ while (count) {
+ transfer = min_t(int, count, 4096);
+ memcpy(buf, data, transfer);
+ status = usb_control_msg(dev->usbdev,
+ usb_sndctrlpipe(dev->usbdev, 0),
+ USB_VENDOR_REGISTER_WRITE,
+ USB_TYPE_VENDOR,
+ ((addr & 0xffff0000) >> 16),
+ (addr & 0xffff),
+ (void *)buf,
+ transfer,
+ HZ * 5);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE,
+ "Reg write failed with error code :%d\n",
+ status);
+ } else {
+ count -= transfer;
+ data += transfer;
+ addr += transfer;
+ }
+ }
+
+ kfree(buf);
+ return 0;
+}
+
+/**
+ * rsi_host_intf_write_pkt() - This function writes the packet to the USB card.
+ * @adapter: Pointer to the adapter structure.
+ * @pkt: Pointer to the data to be written on to the card.
+ * @len: Length of the data to be written on to the card.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_host_intf_write_pkt(struct rsi_hw *adapter,
+ u8 *pkt,
+ u32 len)
+{
+ u32 queueno = ((pkt[1] >> 4) & 0xf);
+ u8 endpoint;
+
+ endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);
+
+ return rsi_write_multiple(adapter,
+ endpoint,
+ (u8 *)pkt,
+ len);
+}
+
+/**
+ * rsi_deinit_usb_interface() - This function deinitializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
+{
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+ rsi_kill_thread(&dev->rx_thread);
+ kfree(adapter->priv->rx_data_pkt);
+}
+
+/**
+ * rsi_init_usb_interface() - This function initializes the usb interface.
+ * @adapter: Pointer to the adapter structure.
+ * @pfunction: Pointer to USB interface structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_init_usb_interface(struct rsi_hw *adapter,
+ struct usb_interface *pfunction)
+{
+ struct rsi_91x_usbdev *rsi_dev;
+ struct rsi_common *common = adapter->priv;
+
+ rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
+ if (!rsi_dev)
+ return -1;
+
+ adapter->rsi_dev = rsi_dev;
+ rsi_dev->usbdev = interface_to_usbdev(pfunction);
+
+ if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
+ return -1;
+
+ adapter->device = &pfunction->dev;
+ usb_set_intfdata(pfunction, adapter);
+
+ common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
+ if (!common->rx_data_pkt) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
+ __func__);
+ return -1;
+ }
+
+ rsi_dev->tx_buffer = kmalloc(2048, GFP_ATOMIC);
+ rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
+ rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
+ rsi_dev->tx_blk_size = 252;
+
+ /* Initializing function callbacks */
+ adapter->rx_urb_submit = rsi_rx_urb_submit;
+ adapter->host_intf_write_pkt = rsi_host_intf_write_pkt;
+ adapter->check_hw_queue_status = rsi_check_queue_status;
+ adapter->determine_event_timeout = rsi_event_timeout;
+
+ rsi_init_event(&rsi_dev->rx_thread.event);
+ if (rsi_create_kthread(common,
+ &rsi_dev->rx_thread,
+ rsi_usb_rx_thread,
+ "RX-Thread")) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n",
+ __func__);
+ goto fail;
+ }
+
+#ifdef CONFIG_RSI_DEBUGFS
+ /* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
+ adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
+#endif
+
+ rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
+ return 0;
+
+fail:
+ kfree(common->rx_data_pkt);
+ return -1;
+}
+
+/**
+ * rsi_probe() - This function is called by kernel when the driver provided
+ * Vendor and device IDs are matched. All the initialization
+ * work is done here.
+ * @pfunction: Pointer to the USB interface structure.
+ * @id: Pointer to the usb_device_id structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_probe(struct usb_interface *pfunction,
+ const struct usb_device_id *id)
+{
+ struct rsi_hw *adapter;
+ struct rsi_91x_usbdev *dev;
+ u16 fw_status;
+
+ rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
+
+ adapter = rsi_91x_init();
+ if (!adapter) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
+ __func__);
+ return 1;
+ }
+
+ if (rsi_init_usb_interface(adapter, pfunction)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
+ __func__);
+ goto err;
+ }
+
+ rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);
+
+ dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+
+ if (rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2) < 0)
+ goto err1;
+ else
+ fw_status &= 1;
+
+ if (!fw_status) {
+ if (rsi_device_init(adapter->priv)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
+ __func__);
+ goto err1;
+ }
+
+ if (rsi_usb_reg_write(dev->usbdev,
+ USB_INTERNAL_REG_1,
+ RSI_USB_READY_MAGIC_NUM, 1) < 0)
+ goto err1;
+ rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
+ }
+
+ if (rsi_rx_urb_submit(adapter))
+ goto err1;
+
+ return 0;
+err1:
+ rsi_deinit_usb_interface(adapter);
+err:
+ rsi_91x_deinit(adapter);
+ rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
+ return 1;
+}
+
+/**
+ * rsi_disconnect() - This function performs the reverse of the probe function,
+ * it deintialize the driver structure.
+ * @pfunction: Pointer to the USB interface structure.
+ *
+ * Return: None.
+ */
+static void rsi_disconnect(struct usb_interface *pfunction)
+{
+ struct rsi_hw *adapter = usb_get_intfdata(pfunction);
+
+ if (!adapter)
+ return;
+
+ rsi_mac80211_detach(adapter);
+ rsi_deinit_usb_interface(adapter);
+ rsi_91x_deinit(adapter);
+
+ rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__);
+}
+
+#ifdef CONFIG_PM
+static int rsi_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ /* Not yet implemented */
+ return -ENOSYS;
+}
+
+static int rsi_resume(struct usb_interface *intf)
+{
+ /* Not yet implemented */
+ return -ENOSYS;
+}
+#endif
+
+static const struct usb_device_id rsi_dev_table[] = {
+ { USB_DEVICE(0x0303, 0x0100) },
+ { USB_DEVICE(0x041B, 0x0301) },
+ { USB_DEVICE(0x041B, 0x0201) },
+ { USB_DEVICE(0x041B, 0x9330) },
+ { /* Blank */},
+};
+
+static struct usb_driver rsi_driver = {
+ .name = "RSI-USB WLAN",
+ .probe = rsi_probe,
+ .disconnect = rsi_disconnect,
+ .id_table = rsi_dev_table,
+#ifdef CONFIG_PM
+ .suspend = rsi_suspend,
+ .resume = rsi_resume,
+#endif
+};
+
+/**
+ * rsi_module_init() - This function registers the client driver.
+ * @void: Void.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_module_init(void)
+{
+ usb_register(&rsi_driver);
+ rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_module_exit() - This function unregisters the client driver.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_module_exit(void)
+{
+ usb_deregister(&rsi_driver);
+ rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
+}
+
+module_init(rsi_module_init);
+module_exit(rsi_module_exit);
+
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Common USB layer for RSI drivers");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_DEVICE_TABLE(usb, rsi_dev_table);
+MODULE_FIRMWARE(FIRMWARE_RSI9113);
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
new file mode 100644
index 0000000..fbcee61
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -0,0 +1,177 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ * copying the TA firmware to the card.Basically this
+ * function includes opening the TA file,reading the TA
+ * file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+ const u8 *fw,
+ u32 len,
+ u32 num_blocks)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ u32 indx, ii;
+ u32 block_size = dev->tx_blk_size;
+ u32 lsb_address;
+ u32 base_address;
+
+ base_address = TA_LOAD_ADDRESS;
+
+ for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+ lsb_address = base_address;
+ if (rsi_write_ta_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %s blk\n", __func__,
+ FIRMWARE_RSI9113);
+ return -1;
+ }
+ rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+ base_address += block_size;
+ }
+
+ if (len % block_size) {
+ lsb_address = base_address;
+ if (rsi_write_ta_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ len % block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %s blk\n", __func__,
+ FIRMWARE_RSI9113);
+ return -1;
+ }
+ }
+ rsi_dbg(INIT_ZONE,
+ "%s: Succesfully loaded %s instructions\n", __func__,
+ FIRMWARE_RSI9113);
+
+ rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
+ * the USB device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_usb_rx_thread(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ int status;
+
+ do {
+ rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
+
+ if (atomic_read(&dev->rx_thread.thread_done))
+ goto out;
+
+ mutex_lock(&common->tx_rxlock);
+ status = rsi_read_pkt(common, 0);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
+ mutex_unlock(&common->tx_rxlock);
+ return;
+ }
+ mutex_unlock(&common->tx_rxlock);
+ rsi_reset_event(&dev->rx_thread.event);
+ if (adapter->rx_urb_submit(adapter)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed in urb submission", __func__);
+ return;
+ }
+ } while (1);
+
+out:
+ rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
+ complete_and_exit(&dev->rx_thread.completion, 0);
+}
+
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ * of loading the TA firmware.This function also
+ * includes opening the TA file,reading the TA
+ * file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ const struct firmware *fw_entry = NULL;
+ u32 block_size = dev->tx_blk_size;
+ const u8 *fw;
+ u32 num_blocks, len;
+ int status = 0;
+
+ status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+ __func__, FIRMWARE_RSI9113);
+ return status;
+ }
+
+ fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+ len = fw_entry->size;
+
+ if (len % 4)
+ len += (4 - (len % 4));
+
+ num_blocks = (len / block_size);
+
+ rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+ rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+ status = rsi_copy_to_card(common, fw, len, num_blocks);
+ release_firmware(fw_entry);
+ return status;
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_device_init(struct rsi_common *common)
+{
+ if (rsi_load_ta_instructions(common))
+ return -1;
+
+ return 0;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 09/11] rsi: SDIO functionality.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (7 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 08/11] rsi: USB functionality fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 10/11] rsi: Remaining " fariyaf
` (3 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch add the rsi_sdio module, enabling SDIO interface
for the 91x chipsets.
---
drivers/net/wireless/rsi/rsi_91x_sdio.c | 845 +++++++++++++++++++++++++++++++
1 files changed, 845 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c
new file mode 100644
index 0000000..98db9e6
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -0,0 +1,845 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/module.h>
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_sdio_set_cmd52_arg() - This function prepares cmd 52 read/write arg.
+ * @rw: Read/write
+ * @func: function number
+ * @raw: indicates whether to perform read after write
+ * @address: address to which to read/write
+ * @writedata: data to write
+ *
+ * Return: argument
+ */
+static u32 rsi_sdio_set_cmd52_arg(bool rw,
+ u8 func,
+ u8 raw,
+ u32 address,
+ u8 writedata)
+{
+ return ((rw & 1) << 31) | ((func & 0x7) << 28) |
+ ((raw & 1) << 27) | (1 << 26) |
+ ((address & 0x1FFFF) << 9) | (1 << 8) |
+ (writedata & 0xFF);
+}
+
+/**
+ * rsi_cmd52writebyte() - This function issues cmd52 byte write onto the card.
+ * @card: Pointer to the mmc_card.
+ * @address: Address to write.
+ * @byte: Data to write.
+ *
+ * Return: Write status.
+ */
+static int rsi_cmd52writebyte(struct mmc_card *card,
+ u32 address,
+ u8 byte)
+{
+ struct mmc_command io_cmd;
+ u32 arg;
+
+ memset(&io_cmd, 0, sizeof(io_cmd));
+ arg = rsi_sdio_set_cmd52_arg(1, 0, 0, address, byte);
+ io_cmd.opcode = SD_IO_RW_DIRECT;
+ io_cmd.arg = arg;
+ io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+ return mmc_wait_for_cmd(card->host, &io_cmd, 0);
+}
+
+/**
+ * rsi_cmd52readbyte() - This function issues cmd52 byte read onto the card.
+ * @card: Pointer to the mmc_card.
+ * @address: Address to read from.
+ * @byte: Variable to store read value.
+ *
+ * Return: Read status.
+ */
+static int rsi_cmd52readbyte(struct mmc_card *card,
+ u32 address,
+ u8 *byte)
+{
+ struct mmc_command io_cmd;
+ u32 arg;
+ int err;
+
+ memset(&io_cmd, 0, sizeof(io_cmd));
+ arg = rsi_sdio_set_cmd52_arg(0, 0, 0, address, 0);
+ io_cmd.opcode = SD_IO_RW_DIRECT;
+ io_cmd.arg = arg;
+ io_cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &io_cmd, 0);
+ if ((!err) && (byte))
+ *byte = io_cmd.resp[0] & 0xFF;
+ return err;
+}
+
+/**
+ * rsi_issue_sdiocommand() - This function issues sdio commands.
+ * @func: Pointer to the sdio_func structure.
+ * @opcode: Opcode value.
+ * @arg: Arguments to pass.
+ * @flags: Flags which are set.
+ * @resp: Pointer to store response.
+ *
+ * Return: err: command status as 0 or -1.
+ */
+static int rsi_issue_sdiocommand(struct sdio_func *func,
+ u32 opcode,
+ u32 arg,
+ u32 flags,
+ u32 *resp)
+{
+ struct mmc_command cmd;
+ struct mmc_host *host;
+ int err;
+
+ host = func->card->host;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = opcode;
+ cmd.arg = arg;
+ cmd.flags = flags;
+ err = mmc_wait_for_cmd(host, &cmd, 3);
+
+ if ((!err) && (resp))
+ *resp = cmd.resp[0];
+
+ return err;
+}
+
+/**
+ * rsi_handle_interrupt() - This function is called upon the occurence
+ * of an interrupt.
+ * @function: Pointer to the sdio_func structure.
+ *
+ * Return: None.
+ */
+static void rsi_handle_interrupt(struct sdio_func *function)
+{
+ struct rsi_hw *adapter = sdio_get_drvdata(function);
+
+ sdio_release_host(function);
+ rsi_interrupt_handler(adapter);
+ sdio_claim_host(function);
+}
+
+/**
+ * rsi_reset_card() - This function resets and re-initializes the card.
+ * @pfunction: Pointer to the sdio_func structure.
+ *
+ * Return: None.
+ */
+static void rsi_reset_card(struct sdio_func *pfunction)
+{
+ int ret = 0;
+ int err;
+ struct mmc_card *card = pfunction->card;
+ struct mmc_host *host = card->host;
+ s32 bit = (fls(host->ocr_avail) - 1);
+ u8 cmd52_resp;
+ u32 clock, resp, i;
+ u16 rca;
+
+ /* Reset 9110 chip */
+ ret = rsi_cmd52writebyte(pfunction->card,
+ SDIO_CCCR_ABORT,
+ (1 << 3));
+
+ /* Card will not send any response as it is getting reset immediately
+ * Hence expect a timeout status from host controller
+ */
+ if (ret != -ETIMEDOUT)
+ rsi_dbg(ERR_ZONE, "%s: Reset failed : %d\n", __func__, ret);
+
+ /* Wait for few milli seconds to get rid of residue charges if any */
+ msleep(20);
+
+ /* Initialize the SDIO card */
+ host->ios.vdd = bit;
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+ host->ios.power_mode = MMC_POWER_UP;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+ host->ops->set_ios(host, &host->ios);
+
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ msleep(20);
+
+ host->ios.clock = host->f_min;
+ host->ios.power_mode = MMC_POWER_ON;
+ host->ops->set_ios(host, &host->ios);
+
+ /*
+ * This delay must be at least 74 clock sizes, or 1 ms, or the
+ * time required to reach a stable voltage.
+ */
+ msleep(20);
+
+ /* Issue CMD0. Goto idle state */
+ host->ios.chip_select = MMC_CS_HIGH;
+ host->ops->set_ios(host, &host->ios);
+ msleep(20);
+ err = rsi_issue_sdiocommand(pfunction,
+ MMC_GO_IDLE_STATE,
+ 0,
+ (MMC_RSP_NONE | MMC_CMD_BC),
+ NULL);
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ops->set_ios(host, &host->ios);
+ msleep(20);
+ host->use_spi_crc = 0;
+
+ if (err)
+ rsi_dbg(ERR_ZONE, "%s: CMD0 failed : %d\n", __func__, err);
+
+ if (!host->ocr_avail) {
+ /* Issue CMD5, arg = 0 */
+ err = rsi_issue_sdiocommand(pfunction,
+ SD_IO_SEND_OP_COND,
+ 0,
+ (MMC_RSP_R4 | MMC_CMD_BCR),
+ &resp);
+ if (err)
+ rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
+ __func__, err);
+ host->ocr_avail = resp;
+ }
+
+ /* Issue CMD5, arg = ocr. Wait till card is ready */
+ for (i = 0; i < 100; i++) {
+ err = rsi_issue_sdiocommand(pfunction,
+ SD_IO_SEND_OP_COND,
+ host->ocr_avail,
+ (MMC_RSP_R4 | MMC_CMD_BCR),
+ &resp);
+ if (err) {
+ rsi_dbg(ERR_ZONE, "%s: CMD5 failed : %d\n",
+ __func__, err);
+ break;
+ }
+
+ if (resp & MMC_CARD_BUSY)
+ break;
+ msleep(20);
+ }
+
+ if ((i == 100) || (err)) {
+ rsi_dbg(ERR_ZONE, "%s: card in not ready : %d %d\n",
+ __func__, i, err);
+ return;
+ }
+
+ /* Issue CMD3, get RCA */
+ err = rsi_issue_sdiocommand(pfunction,
+ SD_SEND_RELATIVE_ADDR,
+ 0,
+ (MMC_RSP_R6 | MMC_CMD_BCR),
+ &resp);
+ if (err) {
+ rsi_dbg(ERR_ZONE, "%s: CMD3 failed : %d\n", __func__, err);
+ return;
+ }
+ rca = resp >> 16;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ host->ops->set_ios(host, &host->ios);
+
+ /* Issue CMD7, select card */
+ err = rsi_issue_sdiocommand(pfunction,
+ MMC_SELECT_CARD,
+ (rca << 16),
+ (MMC_RSP_R1 | MMC_CMD_AC),
+ NULL);
+ if (err) {
+ rsi_dbg(ERR_ZONE, "%s: CMD7 failed : %d\n", __func__, err);
+ return;
+ }
+
+ /* Enable high speed */
+ if (card->host->caps & MMC_CAP_SD_HIGHSPEED) {
+ rsi_dbg(ERR_ZONE, "%s: Set high speed mode\n", __func__);
+ err = rsi_cmd52readbyte(card, SDIO_CCCR_SPEED, &cmd52_resp);
+ if (err) {
+ rsi_dbg(ERR_ZONE, "%s: CCCR speed reg read failed: %d\n",
+ __func__, err);
+ card->state &= ~MMC_STATE_HIGHSPEED;
+ } else {
+ err = rsi_cmd52writebyte(card,
+ SDIO_CCCR_SPEED,
+ (cmd52_resp | SDIO_SPEED_EHS));
+ if (err) {
+ rsi_dbg(ERR_ZONE,
+ "%s: CCR speed regwrite failed %d\n",
+ __func__, err);
+ return;
+ }
+ mmc_card_set_highspeed(card);
+ host->ios.timing = MMC_TIMING_SD_HS;
+ host->ops->set_ios(host, &host->ios);
+ }
+ }
+
+ /* Set clock */
+ if (mmc_card_highspeed(card))
+ clock = 50000000;
+ else
+ clock = card->cis.max_dtr;
+
+ if (clock > host->f_max)
+ clock = host->f_max;
+
+ host->ios.clock = clock;
+ host->ops->set_ios(host, &host->ios);
+
+ if (card->host->caps & MMC_CAP_4_BIT_DATA) {
+ /* CMD52: Set bus width & disable card detect resistor */
+ err = rsi_cmd52writebyte(card,
+ SDIO_CCCR_IF,
+ (SDIO_BUS_CD_DISABLE |
+ SDIO_BUS_WIDTH_4BIT));
+ if (err) {
+ rsi_dbg(ERR_ZONE, "%s: Set bus mode failed : %d\n",
+ __func__, err);
+ return;
+ }
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ host->ops->set_ios(host, &host->ios);
+ }
+}
+
+/**
+ * rsi_setclock() - This function sets the clock frequency.
+ * @adapter: Pointer to the adapter structure.
+ * @freq: Clock frequency.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_setclock(struct rsi_hw *adapter, u32 freq)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ struct mmc_host *host = dev->pfunction->card->host;
+ u32 clock;
+
+ clock = freq * 1000;
+ if (clock > host->f_max)
+ clock = host->f_max;
+ host->ios.clock = clock;
+ host->ops->set_ios(host, &host->ios);
+ return 0;
+}
+
+/**
+ * rsi_setblocklength() - This function sets the host block length.
+ * @adapter: Pointer to the adapter structure.
+ * @length: Block length to be set.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_setblocklength(struct rsi_hw *adapter, u32 length)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ int status;
+ rsi_dbg(INIT_ZONE, "%s: Setting the block length\n", __func__);
+
+ status = sdio_set_block_size(dev->pfunction, length);
+ dev->pfunction->max_blksize = 256;
+
+ rsi_dbg(INFO_ZONE,
+ "%s: Operational blk length is %d\n", __func__, length);
+ return status;
+}
+
+/**
+ * rsi_setupcard() - This function queries and sets the card's features.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_setupcard(struct rsi_hw *adapter)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ int status = 0;
+
+ if (rsi_setclock(adapter, 50000)) {
+ rsi_dbg(INFO_ZONE,
+ "%s: Unsuccessful at setting clk\n", __func__);
+ return -1;
+ }
+
+ dev->tx_blk_size = 256;
+ status = rsi_setblocklength(adapter, dev->tx_blk_size);
+ if (status)
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set block length\n", __func__);
+ return status;
+}
+
+static int rsi_init_sdio_interface(struct rsi_hw *adapter,
+ struct sdio_func *pfunction)
+{
+ struct rsi_91x_sdiodev *rsi_91x_dev;
+ int status = -1;
+
+ rsi_91x_dev = kzalloc(sizeof(*rsi_91x_dev), GFP_KERNEL);
+ if (!rsi_91x_dev)
+ return status;
+
+ adapter->rsi_dev = rsi_91x_dev;
+
+ sdio_claim_host(pfunction);
+
+ pfunction->enable_timeout = 100;
+ status = sdio_enable_func(pfunction);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to enable interface\n", __func__);
+ sdio_release_host(pfunction);
+ return status;
+ }
+
+ rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
+
+ rsi_91x_dev->pfunction = pfunction;
+ adapter->device = &pfunction->dev;
+
+ sdio_set_drvdata(pfunction, adapter);
+
+ status = rsi_setupcard(adapter);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to setup card\n", __func__);
+ goto fail;
+ }
+
+ rsi_dbg(INIT_ZONE, "%s: Setup card succesfully\n", __func__);
+
+ status = rsi_init_sdio_slave_regs(adapter);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to init slave regs\n", __func__);
+ goto fail;
+ }
+ sdio_release_host(pfunction);
+
+ adapter->host_intf_write_pkt = rsi_host_intf_write_pkt;
+ adapter->host_intf_read_pkt = rsi_host_intf_read_pkt;
+ adapter->determine_event_timeout = rsi_determine_event_timeout;
+ adapter->check_hw_queue_status = rsi_read_buffer_status_register;
+
+#ifdef CONFIG_RSI_DEBUGFS
+ adapter->num_debugfs_entries = MAX_DEBUGFS_ENTRIES;
+#endif
+ return status;
+fail:
+ sdio_disable_func(pfunction);
+ sdio_release_host(pfunction);
+ return status;
+}
+
+/**
+ * rsi_read_register() - This function reads one byte of information
+ * from a register.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that stores the data read.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_read_register(struct rsi_hw *adapter,
+ u32 addr,
+ u8 *data)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u8 fun_num = 0;
+ int status;
+
+ sdio_claim_host(dev->pfunction);
+
+ if (fun_num == 0)
+ *data = sdio_f0_readb(dev->pfunction, addr, &status);
+ else
+ *data = sdio_readb(dev->pfunction, addr, &status);
+
+ sdio_release_host(dev->pfunction);
+
+ return status;
+}
+
+/**
+ * rsi_write_register() - This function writes one byte of information
+ * into a register.
+ * @adapter: Pointer to the adapter structure.
+ * @function: Function Number.
+ * @addr: Address of the register.
+ * @data: Pointer to the data tha has to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_write_register(struct rsi_hw *adapter,
+ u8 function,
+ u32 addr,
+ u8 *data)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ int status = 0;
+
+ sdio_claim_host(dev->pfunction);
+
+ if (function == 0)
+ sdio_f0_writeb(dev->pfunction, *data, addr, &status);
+ else
+ sdio_writeb(dev->pfunction, *data, addr, &status);
+
+ sdio_release_host(dev->pfunction);
+
+ return status;
+}
+
+/**
+ * rsi_ack_interrupt() - This function acks the interrupt received.
+ * @adapter: Pointer to the adapter structure.
+ * @int_bit: Interrupt bit to write into register.
+ *
+ * Return: None.
+ */
+void rsi_ack_interrupt(struct rsi_hw *adapter, u8 int_bit)
+{
+ int status;
+ status = rsi_write_register(adapter,
+ 1,
+ (SDIO_FUN1_INTR_CLR_REG |
+ RSI_SD_REQUEST_MASTER),
+ &int_bit);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: unable to send ack\n", __func__);
+}
+
+
+
+/**
+ * rsi_read_register_multiple() - This function read multiple bytes of
+ * information from the SD card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @count: Number of multiple bytes to be read.
+ * @data: Pointer to the read data.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_read_register_multiple(struct rsi_hw *adapter,
+ u32 addr,
+ u32 count,
+ u8 *data)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u32 status;
+
+ sdio_claim_host(dev->pfunction);
+
+ status = sdio_readsb(dev->pfunction, data, addr, count);
+
+ sdio_release_host(dev->pfunction);
+
+ if (status != 0)
+ rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 read failed\n", __func__);
+ return status;
+}
+
+/**
+ * rsi_write_register_multiple() - This function writes multiple bytes of
+ * information to the SD card.
+ * @adapter: Pointer to the adapter structure.
+ * @addr: Address of the register.
+ * @data: Pointer to the data that has to be written.
+ * @count: Number of multiple bytes to be written.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_write_register_multiple(struct rsi_hw *adapter,
+ u32 addr,
+ u8 *data,
+ u32 count)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ int status = 0;
+
+ if (dev->write_fail > 1) {
+ rsi_dbg(ERR_ZONE, "%s: Stopping card writes\n", __func__);
+ return 0;
+ } else if (dev->write_fail == 1) {
+ /**
+ * Assuming it is a CRC failure, we want to allow another
+ * card write
+ */
+ rsi_dbg(ERR_ZONE, "%s: Continue card writes\n", __func__);
+ dev->write_fail++;
+ }
+
+ sdio_claim_host(dev->pfunction);
+
+ status = sdio_writesb(dev->pfunction, addr, data, count);
+
+ sdio_release_host(dev->pfunction);
+
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Synch Cmd53 write failed %d\n",
+ __func__, status);
+ dev->write_fail = 2;
+ } else {
+ memcpy(dev->prev_desc, data, FRAME_DESC_SZ);
+ }
+ return status;
+}
+
+/**
+ * rsi_host_intf_write_pkt() - This function writes the packet to the device.
+ * @adapter: Pointer to the adapter structure.
+ * @pkt: Pointer to the data to be written on to the device.
+ * @len: length of the data to be written on to the device.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_host_intf_write_pkt(struct rsi_hw *adapter,
+ u8 *pkt,
+ u32 len)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u32 block_size = dev->tx_blk_size;
+ u32 num_blocks, address, length;
+ u32 queueno;
+ int status = 0;
+
+ queueno = ((pkt[1] >> 4) & 0xf);
+
+ num_blocks = len / block_size;
+
+ if (len % block_size)
+ num_blocks++;
+
+ address = (num_blocks * block_size | (queueno << 12));
+ length = num_blocks * block_size;
+
+ status = rsi_write_register_multiple(adapter,
+ address,
+ (u8 *)pkt,
+ length);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Unable to write onto the card: %d\n",
+ __func__, status);
+ rsi_dbg(DATA_TX_ZONE, "%s: Successfully written onto card\n", __func__);
+ return status;
+}
+
+/**
+ * rsi_host_intf_read_pkt() - This function reads the packet from the SD card.
+ * @adapter: Pointer to the adapter data structure.
+ * @pkt: Pointer to the packet data to be read from the the device.
+ * @length: Length of the data to be read from the device.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_host_intf_read_pkt(struct rsi_hw *adapter,
+ u8 *pkt,
+ u32 length)
+{
+ int status = 0;
+
+ if (!length) {
+ rsi_dbg(ERR_ZONE, "%s: Pkt size is zero\n", __func__);
+ return status;
+ }
+
+ status = rsi_read_register_multiple(adapter,
+ length,
+ length, /*num of bytes*/
+ (u8 *)pkt);
+
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to read frame: %d\n", __func__,
+ status);
+ return status;
+}
+
+/**
+ * rsi_probe() - This function is called by kernel when the driver provided
+ * Vendor and device IDs are matched. All the initialization
+ * work is done here.
+ * @pfunction: Pointer to the sdio_func structure.
+ * @id: Pointer to sdio_device_id structure.
+ *
+ * Return: 0 on success, 1 on failure.
+ */
+static int rsi_probe(struct sdio_func *pfunction,
+ const struct sdio_device_id *id)
+{
+ struct rsi_hw *adapter;
+
+ rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
+
+ adapter = rsi_91x_init();
+ if (!adapter) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
+ __func__);
+ return 1;
+ }
+
+ if (rsi_init_sdio_interface(adapter, pfunction)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to init sdio interface\n",
+ __func__);
+ goto fail;
+ }
+
+ if (rsi_device_init(adapter->priv)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in device init\n", __func__);
+ sdio_claim_host(pfunction);
+ sdio_disable_func(pfunction);
+ sdio_release_host(pfunction);
+ goto fail;
+ }
+
+ sdio_claim_host(pfunction);
+ if (sdio_claim_irq(pfunction, rsi_handle_interrupt)) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to request IRQ\n", __func__);
+ sdio_release_host(pfunction);
+ goto fail;
+ }
+
+ sdio_release_host(pfunction);
+ rsi_dbg(INIT_ZONE, "%s: Registered Interrupt handler\n", __func__);
+
+ return 0;
+fail:
+ rsi_91x_deinit(adapter);
+ rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
+ return 1;
+}
+
+/**
+ * rsi_disconnect() - This function performs the reverse of the probe function.
+ * @pfunction: Pointer to the sdio_func structure.
+ *
+ * Return: void.
+ */
+static void rsi_disconnect(struct sdio_func *pfunction)
+{
+ struct rsi_hw *adapter = sdio_get_drvdata(pfunction);
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+ if (!adapter)
+ return;
+
+ dev->write_fail = 2;
+ rsi_mac80211_detach(adapter);
+
+ sdio_claim_host(pfunction);
+ sdio_release_irq(pfunction);
+ sdio_disable_func(pfunction);
+ rsi_91x_deinit(adapter);
+ /* Resetting to take care of the case, where-in driver is re-loaded */
+ rsi_reset_card(pfunction);
+ sdio_release_host(pfunction);
+}
+
+#ifdef CONFIG_PM
+static int rsi_suspend(struct device *dev)
+{
+ /* Not yet implemented */
+ return -ENOSYS;
+}
+
+static int rsi_resume(struct device *dev)
+{
+ /* Not yet implemented */
+ return -ENOSYS;
+}
+
+static const struct dev_pm_ops rsi_pm_ops = {
+ .suspend = rsi_suspend,
+ .resume = rsi_resume,
+};
+#endif
+
+static const struct sdio_device_id rsi_dev_table[] = {
+ { SDIO_DEVICE(0x303, 0x100) },
+ { SDIO_DEVICE(0x041B, 0x0301) },
+ { SDIO_DEVICE(0x041B, 0x0201) },
+ { SDIO_DEVICE(0x041B, 0x9330) },
+ { /* Blank */},
+};
+
+static struct sdio_driver rsi_driver = {
+ .name = "RSI-SDIO WLAN",
+ .probe = rsi_probe,
+ .remove = rsi_disconnect,
+ .id_table = rsi_dev_table,
+#ifdef CONFIG_PM
+ .drv = {
+ .pm = &rsi_pm_ops,
+ }
+#endif
+};
+
+/**
+ * rsi_module_init() - This function registers the sdio module.
+ * @void: Void.
+ *
+ * Return: 0 on success.
+ */
+static int rsi_module_init(void)
+{
+ sdio_register_driver(&rsi_driver);
+ rsi_dbg(INIT_ZONE, "%s: Registering driver\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_module_exit() - This function unregisters the sdio module.
+ * @void: Void.
+ *
+ * Return: None.
+ */
+static void rsi_module_exit(void)
+{
+ sdio_unregister_driver(&rsi_driver);
+ rsi_dbg(INFO_ZONE, "%s: Unregistering driver\n", __func__);
+}
+
+module_init(rsi_module_init);
+module_exit(rsi_module_exit);
+
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("Common SDIO layer for RSI drivers");
+MODULE_SUPPORTED_DEVICE("RSI-91x");
+MODULE_DEVICE_TABLE(sdio, rsi_dev_table);
+MODULE_FIRMWARE(FIRMWARE_RSI9113);
+MODULE_VERSION("0.1");
+MODULE_LICENSE("Dual BSD/GPL");
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 10/11] rsi: Remaining SDIO functionality.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (8 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 09/11] rsi: SDIO functionality fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-10 15:26 ` [PATCH v4 11/11] rsi: Makefile and Kconfig fariyaf
` (2 subsequent siblings)
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch adds the functions required by the rsi_sdio module.
---
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 566 +++++++++++++++++++++++++++
1 files changed, 566 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
new file mode 100644
index 0000000..3fdbd25
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -0,0 +1,566 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_sdio.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_sdio_master_access_msword() - This function sets the AHB master access
+ * MS word in the SDIO slave registers.
+ * @adapter: Pointer to the adapter structure.
+ * @ms_word: ms word need to be initialized.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_sdio_master_access_msword(struct rsi_hw *adapter,
+ u16 ms_word)
+{
+ u8 byte;
+ u8 function = 0;
+ int status = 0;
+
+ byte = (u8)(ms_word & 0x00FF);
+
+ rsi_dbg(INIT_ZONE,
+ "%s: MASTER_ACCESS_MSBYTE:0x%x\n", __func__, byte);
+
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_MASTER_ACCESS_MSBYTE,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: fail to access MASTER_ACCESS_MSBYTE\n",
+ __func__);
+ return -1;
+ }
+
+ byte = (u8)(ms_word >> 8);
+
+ rsi_dbg(INIT_ZONE, "%s:MASTER_ACCESS_LSBYTE:0x%x\n", __func__, byte);
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_MASTER_ACCESS_LSBYTE,
+ &byte);
+ return status;
+}
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ * copying the TA firmware to the card.Basically this
+ * function includes opening the TA file,reading the
+ * TA file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+ const u8 *fw,
+ u32 len,
+ u32 num_blocks)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u32 indx, ii;
+ u32 block_size = dev->tx_blk_size;
+ u32 lsb_address;
+ __le32 data[] = { TA_HOLD_THREAD_VALUE, TA_SOFT_RST_CLR,
+ TA_PC_ZERO, TA_RELEASE_THREAD_VALUE };
+ u32 address[] = { TA_HOLD_THREAD_REG, TA_SOFT_RESET_REG,
+ TA_TH0_PC_REG, TA_RELEASE_THREAD_REG };
+ u32 base_address;
+ u16 msb_address;
+
+ base_address = TA_LOAD_ADDRESS;
+ msb_address = base_address >> 16;
+
+ for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+ lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+ if (rsi_write_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %s blk\n", __func__,
+ FIRMWARE_RSI9113);
+ return -1;
+ }
+ rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+ base_address += block_size;
+ if ((base_address >> 16) != msb_address) {
+ msb_address += 1;
+ if (rsi_sdio_master_access_msword(adapter,
+ msb_address)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word reg\n",
+ __func__);
+ return -1;
+ }
+ }
+ }
+
+ if (len % block_size) {
+ lsb_address = ((u16) base_address | RSI_SD_REQUEST_MASTER);
+ if (rsi_write_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ len % block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load f/w\n", __func__);
+ return -1;
+ }
+ }
+ rsi_dbg(INIT_ZONE,
+ "%s: Succesfully loaded TA instructions\n", __func__);
+
+ if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return -1;
+ }
+
+ for (ii = 0; ii < ARRAY_SIZE(data); ii++) {
+ /* Bringing TA out of reset */
+ if (rsi_write_register_multiple(adapter,
+ (address[ii] |
+ RSI_SD_REQUEST_MASTER),
+ (u8 *)&data[ii],
+ 4)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to hold TA threads\n", __func__);
+ return -1;
+ }
+ }
+
+ rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ * of loading the TA firmware.This function also
+ * includes opening the TA file,reading the TA
+ * file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u32 len;
+ u32 num_blocks;
+ const u8 *fw;
+ const struct firmware *fw_entry = NULL;
+ u32 block_size = dev->tx_blk_size;
+ int status = 0;
+ u32 base_address;
+ u16 msb_address;
+
+ if (rsi_sdio_master_access_msword(adapter, TA_BASE_ADDR)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word to common reg\n",
+ __func__);
+ return -1;
+ }
+ base_address = TA_LOAD_ADDRESS;
+ msb_address = (base_address >> 16);
+
+ if (rsi_sdio_master_access_msword(adapter, msb_address)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to set ms word reg\n", __func__);
+ return -1;
+ }
+
+ status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+ __func__, FIRMWARE_RSI9113);
+ return status;
+ }
+
+ fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+ len = fw_entry->size;
+
+ if (len % 4)
+ len += (4 - (len % 4));
+
+ num_blocks = (len / block_size);
+
+ rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+ rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+ status = rsi_copy_to_card(common, fw, len, num_blocks);
+ release_firmware(fw_entry);
+ return status;
+}
+
+/**
+ * rsi_process_pkt() - This Function reads rx_blocks register and figures out
+ * the size of the rx pkt.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int rsi_process_pkt(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ u8 num_blks = 0;
+ u32 rcv_pkt_len = 0;
+ int status = 0;
+
+ status = rsi_read_register(adapter,
+ SDIO_RX_NUM_BLOCKS_REG,
+ &num_blks);
+
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read pkt length from the card:\n",
+ __func__);
+ return status;
+ }
+ rcv_pkt_len = (num_blks * 256);
+
+ common->rx_data_pkt = kmalloc(rcv_pkt_len, GFP_KERNEL);
+ if (!common->rx_data_pkt) {
+ rsi_dbg(ERR_ZONE, "%s: Failed in memory allocation\n",
+ __func__);
+ return -1;
+ }
+
+ status = rsi_host_intf_read_pkt(adapter,
+ common->rx_data_pkt,
+ rcv_pkt_len);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed to read packet from card\n",
+ __func__);
+ goto fail;
+ }
+
+ status = rsi_read_pkt(common, rcv_pkt_len);
+ kfree(common->rx_data_pkt);
+ return status;
+
+fail:
+ kfree(common->rx_data_pkt);
+ return -1;
+}
+
+/**
+ * rsi_init_sdio_slave_regs() - This function does the actual initialization
+ * of SDBUS slave registers.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_init_sdio_slave_regs(struct rsi_hw *adapter)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u8 function = 0;
+ u8 byte;
+ int status = 0;
+
+ if (dev->next_read_delay) {
+ byte = dev->next_read_delay;
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_NXT_RD_DELAY2,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write SDIO_NXT_RD_DELAY2\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ if (dev->sdio_high_speed_enable) {
+ rsi_dbg(INIT_ZONE, "%s: Enabling SDIO High speed\n", __func__);
+ byte = 0x3;
+
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_REG_HIGH_SPEED,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to enable SDIO high speed\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ /* This tells SDIO FIFO when to start read to host */
+ rsi_dbg(INIT_ZONE, "%s: Initialzing SDIO read start level\n", __func__);
+ byte = 0x24;
+
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_READ_START_LVL,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write SDIO_READ_START_LVL\n", __func__);
+ return -1;
+ }
+
+ rsi_dbg(INIT_ZONE, "%s: Initialzing FIFO ctrl registers\n", __func__);
+ byte = (128 - 32);
+
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_READ_FIFO_CTL,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write SDIO_READ_FIFO_CTL\n", __func__);
+ return -1;
+ }
+
+ byte = 32;
+ status = rsi_write_register(adapter,
+ function,
+ SDIO_WRITE_FIFO_CTL,
+ &byte);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write SDIO_WRITE_FIFO_CTL\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * rsi_interrupt_handler() - This function read and process SDIO interrupts.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: None.
+ */
+void rsi_interrupt_handler(struct rsi_hw *adapter)
+{
+ struct rsi_common *common = adapter->priv;
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ int status;
+ enum sdio_interrupt_type isr_type;
+ u8 isr_status = 0;
+ u8 fw_status = 0;
+
+ dev->rx_info.sdio_int_counter++;
+
+ do {
+ mutex_lock(&common->tx_rxlock);
+ status = rsi_read_register(common->priv,
+ RSI_FN1_INT_REGISTER,
+ &isr_status);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to Read Intr Status Register\n",
+ __func__);
+ mutex_unlock(&common->tx_rxlock);
+ return;
+ }
+
+ if (isr_status == 0) {
+ rsi_set_event(&common->tx_thread.event);
+ dev->rx_info.sdio_intr_status_zero++;
+ mutex_unlock(&common->tx_rxlock);
+ return;
+ }
+
+ rsi_dbg(ISR_ZONE, "%s: Intr_status = %x %d %d\n",
+ __func__, isr_status, (1 << MSDU_PKT_PENDING),
+ (1 << FW_ASSERT_IND));
+
+ do {
+ RSI_GET_SDIO_INTERRUPT_TYPE(isr_status, isr_type);
+
+ switch (isr_type) {
+ case BUFFER_AVAILABLE:
+ dev->rx_info.watch_bufferfull_count = 0;
+ dev->rx_info.buffer_full = false;
+ dev->rx_info.mgmt_buffer_full = false;
+ rsi_ack_interrupt(common->priv,
+ (1 << PKT_BUFF_AVAILABLE));
+ rsi_set_event((&common->tx_thread.event));
+ rsi_dbg(ISR_ZONE,
+ "%s: ==> BUFFER_AVILABLE <==\n",
+ __func__);
+ dev->rx_info.buf_avilable_counter++;
+ break;
+
+ case FIRMWARE_ASSERT_IND:
+ rsi_dbg(ERR_ZONE,
+ "%s: ==> FIRMWARE Assert <==\n",
+ __func__);
+ status = rsi_read_register(common->priv,
+ SDIO_FW_STATUS_REG,
+ &fw_status);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read f/w reg\n",
+ __func__);
+ } else {
+ rsi_dbg(ERR_ZONE,
+ "%s: Firmware Status is 0x%x\n",
+ __func__ , fw_status);
+ rsi_ack_interrupt(common->priv,
+ (1 << FW_ASSERT_IND));
+ }
+
+ common->fsm_state = FSM_CARD_NOT_READY;
+ break;
+
+ case MSDU_PACKET_PENDING:
+ rsi_dbg(ISR_ZONE, "Pkt pending interrupt\n");
+ dev->rx_info.total_sdio_msdu_pending_intr++;
+
+ status = rsi_process_pkt(common);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read pkt\n",
+ __func__);
+ mutex_unlock(&common->tx_rxlock);
+ return;
+ }
+ break;
+ default:
+ rsi_ack_interrupt(common->priv,
+ isr_status);
+ dev->rx_info.total_sdio_unknown_intr++;
+ isr_status = 0;
+ rsi_dbg(ISR_ZONE,
+ "Unknown Interrupt %x\n",
+ isr_status);
+ break;
+ }
+ isr_status ^= BIT(isr_type - 1);
+ } while (isr_status);
+ mutex_unlock(&common->tx_rxlock);
+ } while (1);
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_device_init(struct rsi_common *common)
+{
+ if (rsi_load_ta_instructions(common))
+ return -1;
+
+ if (rsi_sdio_master_access_msword(common->priv, MISC_CFG_BASE_ADDR)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to set ms word reg\n",
+ __func__);
+ return -1;
+ }
+ rsi_dbg(INIT_ZONE,
+ "%s: Setting ms word to 0x41050000\n", __func__);
+
+ return 0;
+}
+
+/**
+ * rsi_read_buffer_status_register() - This function is used to the read buffer
+ * status register and set relevant fields
+ * in rsi_91x_sdiodev struct.
+ * @adapter: Pointer to the driver hw structure.
+ * @q_num: The Q number whose status is to be found.
+ *
+ * Return: status: -1 on failure or else queue full/stop is indicated.
+ */
+int rsi_read_buffer_status_register(struct rsi_hw *adapter, u8 q_num)
+{
+ struct rsi_common *common = adapter->priv;
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+ u8 buf_status = 0;
+ int status = 0;
+
+ status = rsi_read_register(common->priv,
+ RSI_DEVICE_BUFFER_STATUS_REGISTER,
+ &buf_status);
+
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to read status register\n", __func__);
+ return -1;
+ }
+
+ if (buf_status & (BIT(PKT_MGMT_BUFF_FULL))) {
+ if (!dev->rx_info.mgmt_buffer_full)
+ dev->rx_info.mgmt_buf_full_counter++;
+ dev->rx_info.mgmt_buffer_full = true;
+ } else {
+ dev->rx_info.mgmt_buffer_full = false;
+ }
+
+ if (buf_status & (BIT(PKT_BUFF_FULL))) {
+ if (!dev->rx_info.buffer_full)
+ dev->rx_info.buf_full_counter++;
+ dev->rx_info.buffer_full = true;
+ } else {
+ dev->rx_info.buffer_full = false;
+ }
+
+ if (buf_status & (BIT(PKT_BUFF_SEMI_FULL))) {
+ if (!dev->rx_info.semi_buffer_full)
+ dev->rx_info.buf_semi_full_counter++;
+ dev->rx_info.semi_buffer_full = true;
+ } else {
+ dev->rx_info.semi_buffer_full = false;
+ }
+
+ if ((q_num == MGMT_SOFT_Q) && (dev->rx_info.mgmt_buffer_full))
+ return QUEUE_FULL;
+
+ if (dev->rx_info.buffer_full)
+ return QUEUE_FULL;
+
+ return QUEUE_NOT_FULL;
+}
+
+/**
+ * rsi_determine_event_timeout() - This Function determines the event
+ * timeout duration.
+ * @adapter: Pointer to the adapter structure.
+ *
+ * Return: timeout duration is returned.
+ */
+int rsi_determine_event_timeout(struct rsi_hw *adapter)
+{
+ struct rsi_91x_sdiodev *dev =
+ (struct rsi_91x_sdiodev *)adapter->rsi_dev;
+
+ /* Once buffer full is seen, event timeout to occur every 2 msecs */
+ if (dev->rx_info.buffer_full)
+ return 2;
+
+ return EVENT_WAIT_FOREVER;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* [PATCH v4 11/11] rsi: Makefile and Kconfig
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (9 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 10/11] rsi: Remaining " fariyaf
@ 2014-03-10 15:26 ` fariyaf
2014-03-14 19:04 ` [PATCH v4 00/11] rsi: Adding RS9113 wireless driver Dan Williams
2014-03-14 19:23 ` John W. Linville
12 siblings, 0 replies; 15+ messages in thread
From: fariyaf @ 2014-03-10 15:26 UTC (permalink / raw)
To: linux-wireless; +Cc: Fariya Fatima
From: Fariya Fatima <fariyaf@gmail.com>
Signed-off-by: Fariya Fatima <fariyaf@gmail.com>
This patch contains changes/additions related to Makefile and Kconfig.
---
drivers/net/wireless/Kconfig | 1 +
drivers/net/wireless/Makefile | 1 +
drivers/net/wireless/rsi/Kconfig | 30 ++++++++++++++++++++++++++++++
drivers/net/wireless/rsi/Makefile | 12 ++++++++++++
4 files changed, 44 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rsi/Kconfig
create mode 100644 drivers/net/wireless/rsi/Makefile
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 200020e..784d66e 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -281,5 +281,6 @@ source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/mwifiex/Kconfig"
source "drivers/net/wireless/cw1200/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
endif # WLAN
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 0fab227..0c88916 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -59,3 +59,4 @@ obj-$(CONFIG_BRCMFMAC) += brcm80211/
obj-$(CONFIG_BRCMSMAC) += brcm80211/
obj-$(CONFIG_CW1200) += cw1200/
+obj-$(CONFIG_RSI_91X) += rsi/
diff --git a/drivers/net/wireless/rsi/Kconfig b/drivers/net/wireless/rsi/Kconfig
new file mode 100644
index 0000000..d0551c4
--- /dev/null
+++ b/drivers/net/wireless/rsi/Kconfig
@@ -0,0 +1,30 @@
+config RSI_91X
+ tristate "Redpine Signals Inc 91x WLAN driver support"
+ depends on MAC80211
+ ---help---
+ This option enabes support for RSI 1x1 devices.
+ Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_DEBUGFS
+ bool "Redpine Signals Inc debug support"
+ depends on RSI_91X
+ default y
+ ---help---
+ Say Y, if you would like to enable debug support. This option
+ creates debugfs entries
+
+config RSI_SDIO
+ tristate "Redpine Signals SDIO bus support"
+ depends on MMC && RSI_91X
+ default m
+ ---help---
+ This option enables the SDIO bus support in rsi drivers.
+ Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_USB
+ tristate "Redpine Signals USB bus support"
+ depends on USB && RSI_91X
+ default m
+ ---help---
+ This option enables the USB bus support in rsi drivers.
+ Select M (recommended), if you have a RSI 1x1 wireless module.
diff --git a/drivers/net/wireless/rsi/Makefile b/drivers/net/wireless/rsi/Makefile
new file mode 100644
index 0000000..b7d7a56
--- /dev/null
+++ b/drivers/net/wireless/rsi/Makefile
@@ -0,0 +1,12 @@
+rsi_91x-y += rsi_91x_main.o
+rsi_91x-y += rsi_91x_core.o
+rsi_91x-y += rsi_91x_mac80211.o
+rsi_91x-y += rsi_91x_mgmt.o
+rsi_91x-y += rsi_91x_pkt.o
+rsi_91x-$(CONFIG_RSI_DEBUGFS) += rsi_91x_debugfs.o
+
+rsi_usb-y += rsi_91x_usb.o rsi_91x_usb_ops.o
+rsi_sdio-y += rsi_91x_sdio.o rsi_91x_sdio_ops.o
+obj-$(CONFIG_RSI_91X) += rsi_91x.o
+obj-$(CONFIG_RSI_SDIO) += rsi_sdio.o
+obj-$(CONFIG_RSI_USB) += rsi_usb.o
--
1.7.5.4
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH v4 00/11] rsi: Adding RS9113 wireless driver.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (10 preceding siblings ...)
2014-03-10 15:26 ` [PATCH v4 11/11] rsi: Makefile and Kconfig fariyaf
@ 2014-03-14 19:04 ` Dan Williams
2014-03-14 19:26 ` John W. Linville
2014-03-14 19:23 ` John W. Linville
12 siblings, 1 reply; 15+ messages in thread
From: Dan Williams @ 2014-03-14 19:04 UTC (permalink / raw)
To: fariyaf; +Cc: linux-wireless
On Mon, 2014-03-10 at 20:56 +0530, fariyaf@gmail.com wrote:
> From: Fariya Fatima <fariyaf@gmail.com>
>
> This series of patches adds Redpine Signals wireless driver.
Looking much better, good work.
One last comment; there are a couple functions (rsi_device_init,
rsi_host_intf_write_pkt) that are defined multiple times, once in the
USB code and once in the SDIO code. These need to be renamed, otherwise
you will not be able to load the USB and the SDIO modules at the same
time.
I would suggest making all the functions in rsi_usb.h start with
"rsi_usb" if they don't already, and have functions in rsi_sdio.h start
with "rsi_sdio" if they don't already.
Dan
> Fariya Fatima (11):
> Adding RS9113 driver header files
> Adding remaining header files
> Adding core and main files.
> Writing packets to device and debugfs.
> MAC80211 callbacks to driver.
> MAC80211 callbacks and management functions internal to device.
> Management functions internal to the device.
> USB functionality
> SDIO functionality.
> Remaining SDIO functionality.
> Makefile and Kconfig
>
> drivers/net/wireless/Kconfig | 1 +
> drivers/net/wireless/Makefile | 1 +
> drivers/net/wireless/rsi/Kconfig | 30 +
> drivers/net/wireless/rsi/Makefile | 12 +
> drivers/net/wireless/rsi/rsi_91x_core.c | 342 +++++++
> drivers/net/wireless/rsi/rsi_91x_debugfs.c | 339 +++++++
> drivers/net/wireless/rsi/rsi_91x_mac80211.c | 1008 +++++++++++++++++++++
> drivers/net/wireless/rsi/rsi_91x_main.c | 270 ++++++
> drivers/net/wireless/rsi/rsi_91x_mgmt.c | 1302 +++++++++++++++++++++++++++
> drivers/net/wireless/rsi/rsi_91x_pkt.c | 195 ++++
> drivers/net/wireless/rsi/rsi_91x_sdio.c | 845 +++++++++++++++++
> drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 566 ++++++++++++
> drivers/net/wireless/rsi/rsi_91x_usb.c | 572 ++++++++++++
> drivers/net/wireless/rsi/rsi_91x_usb_ops.c | 177 ++++
> drivers/net/wireless/rsi/rsi_boot_params.h | 126 +++
> drivers/net/wireless/rsi/rsi_common.h | 87 ++
> drivers/net/wireless/rsi/rsi_debugfs.h | 48 +
> drivers/net/wireless/rsi/rsi_main.h | 232 +++++
> drivers/net/wireless/rsi/rsi_mgmt.h | 285 ++++++
> drivers/net/wireless/rsi/rsi_sdio.h | 129 +++
> drivers/net/wireless/rsi/rsi_usb.h | 70 ++
> 21 files changed, 6637 insertions(+), 0 deletions(-)
> create mode 100644 drivers/net/wireless/rsi/Kconfig
> create mode 100644 drivers/net/wireless/rsi/Makefile
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_core.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_debugfs.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_mac80211.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_main.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_mgmt.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb.c
> create mode 100644 drivers/net/wireless/rsi/rsi_91x_usb_ops.c
> create mode 100644 drivers/net/wireless/rsi/rsi_boot_params.h
> create mode 100644 drivers/net/wireless/rsi/rsi_common.h
> create mode 100644 drivers/net/wireless/rsi/rsi_debugfs.h
> create mode 100644 drivers/net/wireless/rsi/rsi_main.h
> create mode 100644 drivers/net/wireless/rsi/rsi_mgmt.h
> create mode 100644 drivers/net/wireless/rsi/rsi_sdio.h
> create mode 100644 drivers/net/wireless/rsi/rsi_usb.h
>
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH v4 00/11] rsi: Adding RS9113 wireless driver.
2014-03-14 19:04 ` [PATCH v4 00/11] rsi: Adding RS9113 wireless driver Dan Williams
@ 2014-03-14 19:26 ` John W. Linville
0 siblings, 0 replies; 15+ messages in thread
From: John W. Linville @ 2014-03-14 19:26 UTC (permalink / raw)
To: Dan Williams; +Cc: fariyaf, linux-wireless
On Fri, Mar 14, 2014 at 02:04:51PM -0500, Dan Williams wrote:
> On Mon, 2014-03-10 at 20:56 +0530, fariyaf@gmail.com wrote:
> > From: Fariya Fatima <fariyaf@gmail.com>
> >
> > This series of patches adds Redpine Signals wireless driver.
>
> Looking much better, good work.
>
> One last comment; there are a couple functions (rsi_device_init,
> rsi_host_intf_write_pkt) that are defined multiple times, once in the
> USB code and once in the SDIO code. These need to be renamed, otherwise
> you will not be able to load the USB and the SDIO modules at the same
> time.
>
> I would suggest making all the functions in rsi_usb.h start with
> "rsi_usb" if they don't already, and have functions in rsi_sdio.h start
> with "rsi_sdio" if they don't already.
Good thing I haven't pushed yet... :-)
Please make the changes Dan suggests and resubmit...thanks!
John
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v4 00/11] rsi: Adding RS9113 wireless driver.
2014-03-10 15:26 [PATCH v4 00/11] rsi: Adding RS9113 wireless driver fariyaf
` (11 preceding siblings ...)
2014-03-14 19:04 ` [PATCH v4 00/11] rsi: Adding RS9113 wireless driver Dan Williams
@ 2014-03-14 19:23 ` John W. Linville
12 siblings, 0 replies; 15+ messages in thread
From: John W. Linville @ 2014-03-14 19:23 UTC (permalink / raw)
To: fariyaf; +Cc: linux-wireless
On Mon, Mar 10, 2014 at 08:56:28PM +0530, fariyaf@gmail.com wrote:
> From: Fariya Fatima <fariyaf@gmail.com>
>
> This series of patches adds Redpine Signals wireless driver.
>
> Fariya Fatima (11):
> Adding RS9113 driver header files
> Adding remaining header files
> Adding core and main files.
> Writing packets to device and debugfs.
> MAC80211 callbacks to driver.
> MAC80211 callbacks and management functions internal to device.
> Management functions internal to the device.
> USB functionality
> SDIO functionality.
> Remaining SDIO functionality.
> Makefile and Kconfig
I have applied these to wireless-next, after squashing them into a
single commit.
In the future, please put your "Signed-off-by" lines _after_ the
changelog comments...
John
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
^ permalink raw reply [flat|nested] 15+ messages in thread