[ANN] wireless-regdb: master-2014-05-19

[ANN] wireless-regdb: master-2014-05-19

[John W. Linville]

A new release of wireless-regdb (master-2014-05-19) is available at:

http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz

Here is the short log of the changes included since the 2013-11-27
release:

Bjørn Mork (1):
      wireless-regdb: update NO's regulatory rules

Janusz Dziedzic (3):
      wireless-regdb: allow max bandwidth to be AUTO calculated
      wireless-regdb: set AUTO bandwidth for world regulatory
      wireless-regdb: add AUTO-BW rule flag

Johannes Berg (1):
      regdb: Republic of Korea: fix double rule

John W. Linville (2):
      wireless-regdb: correct some flag damage...
      wireless-regdb: update regulatory.bin based on preceding changes.

Luis R. Rodriguez (1):
      wireless-regdb: embrace the Developer Certificate of Origin for contributions

Ronald Wahl (1):
      wireless-regdb: add channels 52..64 and 100..144 to world regdom

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19

[Janusz Dziedzic]

On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> A new release of wireless-regdb (master-2014-05-19) is available at:
>
> http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>
> Here is the short log of the changes included since the 2013-11-27
> release:
>
> Bjørn Mork (1):
>       wireless-regdb: update NO's regulatory rules
>
> Janusz Dziedzic (3):
>       wireless-regdb: allow max bandwidth to be AUTO calculated
>       wireless-regdb: set AUTO bandwidth for world regulatory
This two above should not be merged. That was first version of auto
bandwidth calculation, we skip :)

>       wireless-regdb: add AUTO-BW rule flag
>
> Johannes Berg (1):
>       regdb: Republic of Korea: fix double rule
>
> John W. Linville (2):
>       wireless-regdb: correct some flag damage...
>       wireless-regdb: update regulatory.bin based on preceding changes.
>
> Luis R. Rodriguez (1):
>       wireless-regdb: embrace the Developer Certificate of Origin for contributions
>
> Ronald Wahl (1):
>       wireless-regdb: add channels 52..64 and 100..144 to world regdom
>
> --
> John W. Linville                Someday the world will need a hero, and you
> linville@tuxdriver.com                  might be all we have.  Be ready.
>
>
> _______________________________________________
> wireless-regdb mailing list
> wireless-regdb@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/wireless-regdb

Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19

[Luis R. Rodriguez]

On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> > A new release of wireless-regdb (master-2014-05-19) is available at:
> >
> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
> >
> > Here is the short log of the changes included since the 2013-11-27
> > release:
> >
> > Bjørn Mork (1):
> >       wireless-regdb: update NO's regulatory rules
> >
> > Janusz Dziedzic (3):
> >       wireless-regdb: allow max bandwidth to be AUTO calculated
> >       wireless-regdb: set AUTO bandwidth for world regulatory
> This two above should not be merged. That was first version of auto
> bandwidth calculation, we skip :)

How about on CRDA? Can you check if I merged the wrong stuff as I already
pushed as well? This also currently breaks the parses are there is no
support for the auto stuff yet.

  Luis

Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19

[Janusz Dziedzic]

On 11 June 2014 22:42, Luis R. Rodriguez <mcgrof@suse.com> wrote:
> On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
>> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
>> > A new release of wireless-regdb (master-2014-05-19) is available at:
>> >
>> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
>> >
>> > Here is the short log of the changes included since the 2013-11-27
>> > release:
>> >
>> > Bjørn Mork (1):
>> >       wireless-regdb: update NO's regulatory rules
>> >
>> > Janusz Dziedzic (3):
>> >       wireless-regdb: allow max bandwidth to be AUTO calculated
>> >       wireless-regdb: set AUTO bandwidth for world regulatory
>> This two above should not be merged. That was first version of auto
>> bandwidth calculation, we skip :)
>
> How about on CRDA? Can you check if I merged the wrong stuff as I already
> pushed as well? This also currently breaks the parses are there is no
> support for the auto stuff yet.
>
crda: add AUTO-BW rule flag support - this is correct one.

BR
Janusz

Re: [wireless-regdb] [ANN] wireless-regdb: master-2014-05-19

[John W. Linville]

On Wed, Jun 11, 2014 at 09:15:19PM +0200, Janusz Dziedzic wrote:
> On 19 May 2014 20:50, John W. Linville <linville@tuxdriver.com> wrote:
> > A new release of wireless-regdb (master-2014-05-19) is available at:
> >
> > http://www.kernel.org/pub/software/network/wireless-regdb/wireless-regdb-2014.05.19.tar.gz
> >
> > Here is the short log of the changes included since the 2013-11-27
> > release:
> >
> > Bjørn Mork (1):
> >       wireless-regdb: update NO's regulatory rules
> >
> > Janusz Dziedzic (3):
> >       wireless-regdb: allow max bandwidth to be AUTO calculated
> >       wireless-regdb: set AUTO bandwidth for world regulatory
> This two above should not be merged. That was first version of auto
> bandwidth calculation, we skip :)

OK -- obviously I got confused...

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.