Re: 3.18-rc0: iwlegacy failed after a while

[Pavel Machek <pavel@ucw.cz>]

On Fri 2014-10-24 14:12:40, Stanislaw Gruszka wrote:
> On Thu, Oct 23, 2014 at 01:02:37PM +0000, Grumbach, Emmanuel wrote:
> > [Changed subject]
> > This is really iwlegacy and not iwlwifi.
> > 
> > 
> > > 
> > > Hi!
> > > 
> > > Full dmesg is in the attachment, I guess the troubles started with:
> > > 
> > > iwl3945 0000:03:00.0: Queue 4 stuck for 2004 ms.
> > > iwl3945 0000:03:00.0: On demand firmware reload
> > > iwl3945 0000:03:00.0: Master Disable Timed Out, 100 usec
> > > ieee80211 phy0: Hardware restart was requested
> > > iwl3945 0000:03:00.0: BSM uCode verification failed at addr
> > > 0x00003800+0 (of 900), is 0xa5\
> > > a5a5a2, s/b 0xf802020
> > > iwl3945 0000:03:00.0: Unable to set up bootstrap uCode: -5
> > > 
> > 
> > Huh - I don't remember any change there, but you should ask the right person - iwlegacy maintainer :)
> 
> Since 3.17 we have only 2 minor iwlegacy changes on current linus tree.
> If this is a regression it's probably caused by different subsystem
> changes, most likely by PCI changes. If this is not regression, such
> errors could be caused by enabling PS, but that has to be done
> explicitly, Pavel did you enable power_save ? 

This is running pretty standart MATE desktop, and no, I don't think I
enabled that.
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html