From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:52912 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755093AbaK0MIw (ORCPT ); Thu, 27 Nov 2014 07:08:52 -0500 Subject: [PATCH v4 0/2] ath10k: device tree support To: From: Kalle Valo CC: , , Date: Thu, 27 Nov 2014 14:08:47 +0200 Message-ID: <20141127120727.17546.61202.stgit@potku.adurom.net> (sfid-20141127_130904_714816_A211B43B) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Sender: linux-wireless-owner@vger.kernel.org List-ID: Hi, here's providing ath10k calibration data via device tree support which Toshi and me have been working on. Please review. Device tree maintainers: please review the bindings document carefully, this is the first time I have written one. v4: * use correct devicetree mailing list address v3: * add a debug message to ath10k * write bindings file * use ar->dev.of_node instead of pci_device_to_OF_node() v2: * fixed a bug that returns an uninitialized value if the node is not found --- Kalle Valo (1): dt: bindings: add ath10k wireless device Toshi Kikuchi (1): ath10k: read calibration data from Device Tree .../bindings/net/wireless/qcom,ath10k.txt | 30 +++++++++ drivers/net/wireless/ath/ath10k/core.c | 70 ++++++++++++++++++++ drivers/net/wireless/ath/ath10k/core.h | 3 + 3 files changed, 102 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt