* [PATCH v3 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device
[not found] <b442bf7ee73817953edb91ab0646d6371b6e71b3.1431320004.git.johnny.kim@atmel.com>
@ 2015-05-11 5:30 ` Johnny Kim
2015-05-17 18:53 ` [PATCH v3 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver Nicolas Ferre
2015-05-24 20:37 ` Greg KH
2 siblings, 0 replies; 6+ messages in thread
From: Johnny Kim @ 2015-05-11 5:30 UTC (permalink / raw)
To: gregkh, devel, linux-wireless
Cc: chris.park, rachel.kim, dean.lee, tony.cho, Nicolas.FERRE,
Johnny Kim
Add myself as maintainer for atmel wilc1000
Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Changes in v3:
- fix the permissions.
- fix the folder tree.
- forget to add the mailing-list during the previous sending.
- remove driverdev.osuosl.org mailing
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b8263c..e5cef88 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9473,6 +9473,15 @@ M: Forest Bond <forest@alittletooquiet.net>
S: Odd Fixes
F: drivers/staging/vt665?/
+STAGING - WILC1000 WIFI DRIVER
+M: Johnny Kim <johnny.kim@atmel.com>
+M: Rachel Kim <rachel.kim@atmel.com>
+M: Dean Lee <dean.lee@atmel.com>
+M: Chris Park <chris.park@atmel.com>
+L: linux-wireless@vger.kernel.org
+S: Supported
+F: drivers/staging/wilc1000/
+
STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER
M: Arnaud Patard <arnaud.patard@rtp-net.org>
S: Odd Fixes
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v3 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver
[not found] <b442bf7ee73817953edb91ab0646d6371b6e71b3.1431320004.git.johnny.kim@atmel.com>
2015-05-11 5:30 ` [PATCH v3 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device Johnny Kim
@ 2015-05-17 18:53 ` Nicolas Ferre
2015-05-17 19:47 ` Greg KH
2015-05-18 8:04 ` Dan Carpenter
2015-05-24 20:37 ` Greg KH
2 siblings, 2 replies; 6+ messages in thread
From: Nicolas Ferre @ 2015-05-17 18:53 UTC (permalink / raw)
To: Johnny Kim, gregkh, devel, linux-wireless
Cc: chris.park, rachel.kim, dean.lee, tony.cho, Patrice VILCHEZ
Le 11/05/2015 07:30, Johnny Kim a écrit :
> This driver is for the wilc1000 which is a single chip IEEE 802.11
> b/g/n device.
> The driver works together with cfg80211, which is the kernel side of
> configuration management for wireless devices because the wilc1000
> chipset is fullmac where the MLME is managed in hardware.
>
> The driver worked from kernel version 2.6.38 and being now ported
> to several others since then.
> A TODO file is included as well in this commit.
>
> Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
> Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
> Signed-off-by: Dean Lee <dean.lee@atmel.com>
> Signed-off-by: Chris Park <chris.park@atmel.com>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> Changes in v3:
> - fix the permissions.
> - fix the folder tree.
> - forget to add the mailing-list during the previous sending.
Hi Greg,
Do you have any comment on this v3 series (aka ping ;-)).
Bye,
> drivers/staging/Kconfig | 2 +
> drivers/staging/Makefile | 1 +
> drivers/staging/wilc1000/Kconfig | 55 +
> drivers/staging/wilc1000/Makefile | 41 +
> drivers/staging/wilc1000/TODO | 8 +
> drivers/staging/wilc1000/coreconfigsimulator.h | 20 +
> drivers/staging/wilc1000/coreconfigurator.c | 2201 ++++++
> drivers/staging/wilc1000/coreconfigurator.h | 498 ++
> drivers/staging/wilc1000/fifo_buffer.c | 142 +
> drivers/staging/wilc1000/fifo_buffer.h | 23 +
> drivers/staging/wilc1000/host_interface.c | 8074 +++++++++++++++++++++
> drivers/staging/wilc1000/host_interface.h | 1344 ++++
> drivers/staging/wilc1000/itypes.h | 60 +
> drivers/staging/wilc1000/linux_mon.c | 643 ++
> drivers/staging/wilc1000/linux_wlan.c | 2953 ++++++++
> drivers/staging/wilc1000/linux_wlan_common.h | 170 +
> drivers/staging/wilc1000/linux_wlan_sdio.c | 249 +
> drivers/staging/wilc1000/linux_wlan_sdio.h | 14 +
> drivers/staging/wilc1000/linux_wlan_spi.c | 510 ++
> drivers/staging/wilc1000/linux_wlan_spi.h | 14 +
> drivers/staging/wilc1000/wilc_debugfs.c | 185 +
> drivers/staging/wilc1000/wilc_errorsupport.h | 84 +
> drivers/staging/wilc1000/wilc_event.h | 123 +
> drivers/staging/wilc1000/wilc_exported_buf.c | 76 +
> drivers/staging/wilc1000/wilc_log.h | 47 +
> drivers/staging/wilc1000/wilc_memory.c | 63 +
> drivers/staging/wilc1000/wilc_memory.h | 330 +
> drivers/staging/wilc1000/wilc_msgqueue.c | 211 +
> drivers/staging/wilc1000/wilc_msgqueue.h | 133 +
> drivers/staging/wilc1000/wilc_osconfig.h | 55 +
> drivers/staging/wilc1000/wilc_oswrapper.h | 133 +
> drivers/staging/wilc1000/wilc_platform.h | 181 +
> drivers/staging/wilc1000/wilc_sdio.c | 1298 ++++
> drivers/staging/wilc1000/wilc_semaphore.c | 70 +
> drivers/staging/wilc1000/wilc_semaphore.h | 115 +
> drivers/staging/wilc1000/wilc_sleep.c | 36 +
> drivers/staging/wilc1000/wilc_sleep.h | 45 +
> drivers/staging/wilc1000/wilc_spi.c | 1475 ++++
> drivers/staging/wilc1000/wilc_strutils.c | 431 ++
> drivers/staging/wilc1000/wilc_strutils.h | 412 ++
> drivers/staging/wilc1000/wilc_thread.c | 35 +
> drivers/staging/wilc1000/wilc_thread.h | 153 +
> drivers/staging/wilc1000/wilc_time.c | 163 +
> drivers/staging/wilc1000/wilc_time.h | 205 +
> drivers/staging/wilc1000/wilc_timer.c | 51 +
> drivers/staging/wilc1000/wilc_timer.h | 153 +
> drivers/staging/wilc1000/wilc_type.h | 34 +
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4592 ++++++++++++
> drivers/staging/wilc1000/wilc_wfi_cfgoperations.h | 134 +
> drivers/staging/wilc1000/wilc_wfi_netdevice.c | 960 +++
> drivers/staging/wilc1000/wilc_wfi_netdevice.h | 277 +
> drivers/staging/wilc1000/wilc_wlan.c | 2434 +++++++
> drivers/staging/wilc1000/wilc_wlan.h | 321 +
> drivers/staging/wilc1000/wilc_wlan_cfg.c | 643 ++
> drivers/staging/wilc1000/wilc_wlan_cfg.h | 33 +
> drivers/staging/wilc1000/wilc_wlan_if.h | 991 +++
> 56 files changed, 33704 insertions(+)
> create mode 100644 drivers/staging/wilc1000/Kconfig
> create mode 100644 drivers/staging/wilc1000/Makefile
> create mode 100644 drivers/staging/wilc1000/TODO
> create mode 100644 drivers/staging/wilc1000/coreconfigsimulator.h
> create mode 100644 drivers/staging/wilc1000/coreconfigurator.c
> create mode 100644 drivers/staging/wilc1000/coreconfigurator.h
> create mode 100644 drivers/staging/wilc1000/fifo_buffer.c
> create mode 100644 drivers/staging/wilc1000/fifo_buffer.h
> create mode 100644 drivers/staging/wilc1000/host_interface.c
> create mode 100644 drivers/staging/wilc1000/host_interface.h
> create mode 100644 drivers/staging/wilc1000/itypes.h
> create mode 100644 drivers/staging/wilc1000/linux_mon.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_common.h
> create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_sdio.h
> create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.c
> create mode 100644 drivers/staging/wilc1000/linux_wlan_spi.h
> create mode 100644 drivers/staging/wilc1000/wilc_debugfs.c
> create mode 100644 drivers/staging/wilc1000/wilc_errorsupport.h
> create mode 100644 drivers/staging/wilc1000/wilc_event.h
> create mode 100644 drivers/staging/wilc1000/wilc_exported_buf.c
> create mode 100644 drivers/staging/wilc1000/wilc_log.h
> create mode 100644 drivers/staging/wilc1000/wilc_memory.c
> create mode 100644 drivers/staging/wilc1000/wilc_memory.h
> create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.c
> create mode 100644 drivers/staging/wilc1000/wilc_msgqueue.h
> create mode 100644 drivers/staging/wilc1000/wilc_osconfig.h
> create mode 100644 drivers/staging/wilc1000/wilc_oswrapper.h
> create mode 100644 drivers/staging/wilc1000/wilc_platform.h
> create mode 100644 drivers/staging/wilc1000/wilc_sdio.c
> create mode 100644 drivers/staging/wilc1000/wilc_semaphore.c
> create mode 100644 drivers/staging/wilc1000/wilc_semaphore.h
> create mode 100644 drivers/staging/wilc1000/wilc_sleep.c
> create mode 100644 drivers/staging/wilc1000/wilc_sleep.h
> create mode 100644 drivers/staging/wilc1000/wilc_spi.c
> create mode 100644 drivers/staging/wilc1000/wilc_strutils.c
> create mode 100644 drivers/staging/wilc1000/wilc_strutils.h
> create mode 100644 drivers/staging/wilc1000/wilc_thread.c
> create mode 100644 drivers/staging/wilc1000/wilc_thread.h
> create mode 100644 drivers/staging/wilc1000/wilc_time.c
> create mode 100644 drivers/staging/wilc1000/wilc_time.h
> create mode 100644 drivers/staging/wilc1000/wilc_timer.c
> create mode 100644 drivers/staging/wilc1000/wilc_timer.h
> create mode 100644 drivers/staging/wilc1000/wilc_type.h
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_cfgoperations.h
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.c
> create mode 100644 drivers/staging/wilc1000/wilc_wfi_netdevice.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan.c
> create mode 100644 drivers/staging/wilc1000/wilc_wlan.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.c
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_cfg.h
> create mode 100644 drivers/staging/wilc1000/wilc_wlan_if.h
>
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index bfacf69..da35af6 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -112,4 +112,6 @@ source "drivers/staging/i2o/Kconfig"
>
> source "drivers/staging/fsl-mc/Kconfig"
>
> +source "drivers/staging/wilc1000/Kconfig"
> +
> endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 2bbd1bf..edbe5ff 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -48,3 +48,4 @@ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/
> obj-$(CONFIG_FB_TFT) += fbtft/
> obj-$(CONFIG_I2O) += i2o/
> obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
> +obj-$(CONFIG_WILC1000) += wilc1000/
> diff --git a/drivers/staging/wilc1000/Kconfig b/drivers/staging/wilc1000/Kconfig
> new file mode 100644
> index 0000000..101f908
> --- /dev/null
> +++ b/drivers/staging/wilc1000/Kconfig
> @@ -0,0 +1,55 @@
> +config WILC1000
> + tristate "WILC1000 support (WiFi only)"
> + ---help---
> + This module only support IEEE 802.11n WiFi.
> +
> +choice
> + prompt "Memory Allocation"
> + depends on WILC1000
> + default WILC1000_PREALLOCATE_AT_LOADING_DRIVER
> +
> + config WILC1000_PREALLOCATE_AT_LOADING_DRIVER
> + bool "Preallocate memory at loading driver"
> + ---help---
> + This choice supports static allocation of the memory
> + for the receive buffer. The driver will allocate the RX buffer
> + during initial time. The driver will also free the buffer
> + by calling network device stop.
> +
> + config WILC1000_DYNAMICALLY_ALLOCATE_MEMROY
> + bool "Dynamically allocate memory in real time"
> + ---help---
> + This choice supports dynamic allocation of the memory
> + for the receive buffer. The driver will allocate the RX buffer
> + when it is required.
> +endchoice
> +
> +
> +choice
> + prompt "Bus Type"
> + depends on WILC1000
> + default WILC1000_SDIO
> +
> + config WILC1000_SDIO
> + bool "SDIO support"
> + depends on MMC
> + ---help---
> + This module adds support for the SDIO interface of adapters using
> + WILC chipset. Select this if your platform is using the SDIO bus.
> +
> + config WILC1000_SPI
> + bool "SPI support"
> + ---help---
> + This module adds support for the SPI interface of adapters using
> + WILC chipset. Select this if your platform is using the SPI bus.
> +endchoice
> +
> +
> +config WILC1000_HW_OOB_INTR
> + bool "Use out of band interrupt"
> + depends on WILC1000 && WILC1000_SDIO
> + default n
> + ---help---
> + If your platform don't recognize SDIO IRQ, connect chipset external IRQ pin
> + and check this option. Or, Use this to get all interrupts including SDIO interrupts.
> +
> diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
> new file mode 100644
> index 0000000..84bd975
> --- /dev/null
> +++ b/drivers/staging/wilc1000/Makefile
> @@ -0,0 +1,41 @@
> +obj-$(CONFIG_WILC1000) += wilc1000.o
> +obj-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += wilc_exported_buf.o
> +
> +
> +ccflags-$(CONFIG_WILC1000_SDIO) += -DWILC_SDIO -DCOMPLEMENT_BOOT
> +ccflags-$(CONFIG_WILC1000_HW_OOB_INTR) += -DWILC_SDIO_IRQ_GPIO
> +ccflags-$(CONFIG_WILC1000_SPI) += -DWILC_SPI
> +
> +ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
> + -DAP_FIRMWARE=\"atmel/wilc1000_ap_fw.bin\" \
> + -DP2P_CONCURRENCY_FIRMWARE=\"atmel/wilc1000_p2p_fw.bin\"
> +
> +ccflags-y += -I$(src)/ -DEXPORT_SYMTAB -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 \
> + -DPLL_WORKAROUND -DCONNECT_DIRECT -DAGING_ALG \
> + -DWILC_PARSE_SCAN_IN_HOST -DDISABLE_PWRSAVE_AND_SCAN_DURING_IP \
> + -DWILC_PLATFORM=WILC_LINUXKERNEL -Wno-unused-function -DUSE_WIRELESS \
> + -DWILC_DEBUGFS
> +#ccflags-y += -DTCP_ACK_FILTER
> +
> +ccflags-$(CONFIG_WILC1000_PREALLOCATE_DURING_SYSTEM_BOOT) += -DMEMORY_STATIC \
> + -DWILC_PREALLOC_AT_BOOT
> +
> +ccflags-$(CONFIG_WILC1000_PREALLOCATE_AT_LOADING_DRIVER) += -DMEMORY_STATIC \
> + -DWILC_PREALLOC_AT_INSMOD
> +
> +ccflags-$(CONFIG_WILC1000_DYNAMICALLY_ALLOCATE_MEMROY) += -DWILC_NORMAL_ALLOC
> +
> +
> +wilc1000-objs := wilc_wfi_netdevice.o wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
> + wilc_memory.o wilc_msgqueue.o wilc_semaphore.o wilc_sleep.o wilc_strutils.o \
> + wilc_thread.o wilc_time.o wilc_timer.o coreconfigurator.o host_interface.o \
> + fifo_buffer.o wilc_sdio.o wilc_spi.o wilc_wlan_cfg.o wilc_debugfs.o
> +
> +wilc1000-$(CONFIG_WILC1000_SDIO) += linux_wlan_sdio.o
> +wilc1000-$(CONFIG_WILC1000_SPI) += linux_wlan_spi.o
> +
> +WILC1000_SRC_VERSION = 10.0
> +PATCHLEVEL = 2
> +WILC1000_FW_VERSION = 0
> +
> +ccflags-y += -D__DRIVER_VERSION__=\"$(WILC1000_SRC_VERSION).$(PATCHLEVEL)\"
> diff --git a/drivers/staging/wilc1000/TODO b/drivers/staging/wilc1000/TODO
> new file mode 100644
> index 0000000..5dfeb3e
> --- /dev/null
> +++ b/drivers/staging/wilc1000/TODO
> @@ -0,0 +1,8 @@
> +TODO:
> +- remove the defined feature as kernel versions
> +- remove OS wrapper functions
> +- remove custom debug and tracing functions
> +- rework comments and function headers(also coding style)
> +- remove build warnings
> +- support soft-ap and p2p mode
> +- support resume/suspend function
> diff --git a/drivers/staging/wilc1000/coreconfigsimulator.h b/drivers/staging/wilc1000/coreconfigsimulator.h
> new file mode 100644
> index 0000000..6c3f431
> --- /dev/null
> +++ b/drivers/staging/wilc1000/coreconfigsimulator.h
> @@ -0,0 +1,20 @@
[..]
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v3 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver
[not found] <b442bf7ee73817953edb91ab0646d6371b6e71b3.1431320004.git.johnny.kim@atmel.com>
2015-05-11 5:30 ` [PATCH v3 2/2] staging: MAINTAINERS: add maintainer for wilc1000 device Johnny Kim
2015-05-17 18:53 ` [PATCH v3 1/2] staging: wilc1000: Add SDIO/SPI 802.11 driver Nicolas Ferre
@ 2015-05-24 20:37 ` Greg KH
2 siblings, 0 replies; 6+ messages in thread
From: Greg KH @ 2015-05-24 20:37 UTC (permalink / raw)
To: Johnny Kim
Cc: devel, linux-wireless, rachel.kim, dean.lee, chris.park,
Nicolas.FERRE, tony.cho
On Mon, May 11, 2015 at 02:30:56PM +0900, Johnny Kim wrote:
> This driver is for the wilc1000 which is a single chip IEEE 802.11
> b/g/n device.
> The driver works together with cfg80211, which is the kernel side of
> configuration management for wireless devices because the wilc1000
> chipset is fullmac where the MLME is managed in hardware.
>
> The driver worked from kernel version 2.6.38 and being now ported
> to several others since then.
> A TODO file is included as well in this commit.
There are some build warnings with this patch. Expect an email from the
0-day bot about them. I suggest sending me patches to fix those up as
soon as possible.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread